XC7Z012S-2CLG485E - 55K Logic Cell Zynq SoC | AMD
MPN: XC7Z012S-2CLG485E ✓ Hoạt độngXC7Z012S-2CLG485E Tóm tắt
A Zynq-7000 SoC is a heterogeneous embedded-processing device that unifies a microprocessor system and programmable logic in one silicon package. The ARM Cortex-A9 processor executes operating-system and application software, while the FPGA fabric implements parallel data processing, custom interfaces, or hardware accelerators. This integration can reduce component count and avoid transferring large amounts of data across a separate processor-to-FPGA interface.
Key features of the XC7Z012S-2CLG485E include its single-core Cortex-A9 configuration, 766 MHz operating frequency, and 55K programmable logic cells. The integrated SoC also includes a temperature sensor, watchdog timeout detection, and AES encryption support. These functions make the device applicable to industrial control, communications, embedded vision, and data-acquisition systems requiring both sequential software execution and parallel hardware logic.
The -2 device designation identifies the speed grade, while CLG485 identifies the 485-ball chip-scale BGA package and E identifies the extended-temperature product variant. The verified product information specifies an operating temperature range of 0 °C to 100 °C for the junction. The SoC architecture combines software programmability with hardware programmability, allowing control functions, data pipelines, protocol handling, and accelerator logic to coexist in one device.
Typical applications include industrial automation controllers, networked sensor gateways, camera and image-processing systems, test-and-measurement instruments, and embedded control platforms. The processor can manage communications, configuration, and supervisory functions, while parallel FPGA logic handles deterministic sampling, filtering, protocol conversion, or data acquisition at rates that would otherwise require additional logic devices.
PCB implementation requires careful BGA layout, power-delivery design, thermal management, and signal-integrity control. Place the device according to the AMD package placement diagram, connect all required power and ground balls, and route high-speed interfaces with controlled impedance. The 19 mm by 19 mm CSPBGA package also requires a land pattern, mask, and assembly process capable of supporting its ball pitch and ball count.
This page combines the exact manufacturer and distributor attributes, a same-footprint industrial-temperature alternative, a lower-speed same-family option, package references, and practical implementation guidance. It helps engineers identify whether the XC7Z012S-2CLG485E matches a design requiring a 766 MHz single-core Arm processor, 55K logic cells, and a 485-ball BGA footprint.
Bộ thay thế dễ dàng lắp đặt cho XC7Z012S-2CLG485E — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7Z012S-2CLG485E (cùng hình factor và footprint) — khác nhau ở Operating Temperature Range, Processor Core, Mounting Type, Device Type, Package.
XC7Z012S-2CLG485I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z012S-1CLG485C
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC7Z012S-2CLG485E Tỷ lệ tối đa & tính chất điện
| Device Type | Zynq-7000 All Programmable SoC |
| Processor Core | 1 x Arm Cortex-A9 MPCore |
| Processor Operating Frequency | 766 MHz |
| Programmable Logic Cells | 55K cells |
| FPGA Family | Artix-7 |
| Debug Technology | CoreSight |
| Hộp | 485-CSPBGA, 19 mm x 19 mm |
| Ball Count | 485 balls |
| Khoảng nhiệt độ hoạt động | 0 °C to 100 °C (junction) |
| Speed Grade | -2 |
| Temperature Variant | E, extended |
| Kiểu lắp đặt | Surface mount |
| Integrated Temperature Sensor | Supported |
| Watchdog Timeout Detection | Supported |
| Encryption Support | AES |
| Process Technology | 28 nm |
Hướng dẫn cấu hình chân XC7Z012S-2CLG485E 485-cspbga, 19 mm x 19 mm
Cấu hình chân cho XC7Z012S-2CLG485E (485-cspbga, 19 mm x 19 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7Z012S-2CLG485E.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7Z012S-2CLG485E phù hợp cho 6 Áp dụngs: Industrial Automation Controller, Sensor Gateway and Edge Processor, Machine Vision Accelerator, Test and Measurement Instrument, Communications Protocol Bridge, Programmable Logic Test Platform.
Industrial Automation Controller
The XC7Z012S-2CLG485E fits industrial automation controllers because it combines a 766 MHz single-core Arm Cortex-A9 processor with 55K Artix-7 FPGA logic cells. The processor can run communications, configuration, diagnostics, and supervisory software, while programmable logic handles deterministic timing, encoder interfaces, or parallel signal conditioning. This division reduces reliance on separate logic devices and allows control tasks and hardware pipelines to operate concurrently. The integrated watchdog timeout detection is useful for detecting stalled control processes, while AES encryption can protect selected control or communication data. For deployment across 0 °C to 100 °C junction conditions, the enclosure and power design must preserve adequate thermal margin and maintain clean supply rails.
Được đề xuất
Sensor Gateway and Edge Processor
The XC7Z012S-2CLG485E can serve as a sensor gateway that combines network-facing software with parallel sensor-data processing. The Cortex-A9 core at 766 MHz can manage protocol stacks, data buffering, device configuration, and health monitoring, while 55K FPGA logic cells can accelerate filtering, framing, interpolation, or time-domain processing. This architecture is useful when sensor traffic must be reduced before transmission or when deterministic acquisition must continue alongside an operating system. The watchdog function supports recovery from processing stalls, and AES encryption can protect selected telemetry links. Board design should isolate sensitive high-speed interfaces, provide tested clocking and reset sequencing, and verify the final power budget under the worst simultaneous processor and FPGA load.
Được đề xuất
Machine Vision Accelerator
The XC7Z012S-2CLG485E suits machine-vision systems that require flexible preprocessing between a camera interface and a higher-level processor. A single Cortex-A9 processor running at 766 MHz can manage control software and system-level decisions, while the 55K Artix-7 fabric can implement parallel pixel processing, color conversion, thresholding, or data reduction. Consolidating these stages in one programmable device allows the hardware pipeline to change without redesigning a fixed ASIC. The 485-CSPBGA package supports compact integration but demands careful BGA fanout and thermal planning. Designers should use controlled-impedance camera and memory routes, verify timing for the selected FPGA speed grade, and test image throughput under the highest expected frame rate and image format.
Được đề xuất
Test and Measurement Instrument
The XC7Z012S-2CLG485E is suitable for modular test-and-measurement equipment where flexible acquisition logic and embedded control must coexist. The Arm processor can manage calibration data, instrument control, USB or network communication, and a user interface, while the FPGA fabric can implement timing, counting, waveform capture, filtering, or protocol conversion. A common processor and programmable-logic architecture simplifies data sharing because high-volume samples do not need to cross a separate device-to-device interface. The device also provides a temperature sensor that can support board-health monitoring when the system software reads it correctly. For accurate measurements, separate analog and digital paths, use clean references, and characterize clock jitter and FPGA timing margins under the required temperature range.
Được đề xuất
Communications Protocol Bridge
The XC7Z012S-2CLG485E can implement a communications bridge by assigning protocol conversion and low-latency packet handling to the 55K FPGA fabric while the 766 MHz Cortex-A9 core manages higher-level routing, configuration, and diagnostics. Parallel logic is particularly useful for framing, bit manipulation, buffering, and interfaces whose timing is too restrictive for a purely software-driven approach. AES encryption support can be applied where protected payload or management traffic is required, subject to the correct system key-management design. The watchdog timeout detection can help identify a hung software or hardware-processing path. Keep the board’s clocks, ground planes, and I/O return paths organized so simultaneous switching in the programmable logic does not degrade communication-signal integrity.
Được đề xuất
Programmable Logic Test Platform
The XC7Z012S-2CLG485E provides a compact platform for combining processor-based test control with dedicated programmable logic. The Arm Cortex-A9 core can execute test algorithms, communicate with a host, update configuration, and store results, while the 55K Artix-7 logic fabric can generate patterns, capture responses, or emulate peripheral behavior at deterministic rates. The same-device architecture shortens the path between test control and real-time hardware, making it useful for board validation and embedded subsystem development. Designers should preserve separate reset paths, use repeatable clock sources, and document FPGA bitstream and software-image versioning. For production use, confirm that the selected -2 timing closure remains valid across voltage and temperature and that the assembled 485-ball BGA has adequate power and thermal support.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7Z012S-2CLG485E — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7Z012S-2CLG485I | XC7Z012S-1CLG485C |
|---|---|---|---|
| Brand | AMD | AMD | AMD |
| Package | 485-CSPBGA (19 x 19 mm) | 485-CSPBGA (19 x 19 mm) | 485-CSPBGA (19 x 19 mm) |
| Processor Core | Single Arm Cortex-A9 MPCore | Single Arm Cortex-A9 MPCore | Single Arm Cortex-A9 MPCore |
| Programmable Logic Cells | 55K cells | 55K cells | 55K cells |
| Speed Grade | -2 | -2 | -1 |
| Temperature Variant | E, extended | I, industrial | C, commercial |
Bảo phân biệt quan trọng
- Higher speed grade within the same package and logic configuration (vsXC7Z012S-1CLG485C)
- Closest temperature-grade upgrade without changing the primary architecture (vsXC7Z012S-2CLG485E)
- Combines a 766 MHz processor and 55K programmable logic cells in one SoC (vsXC7Z012S-1CLG485C)
Ghi chú thiết kế
Use the AMD XC7Z012-CLG485 package placement diagram and the Zynq-7000 package-device pinout files as the authority for all 485 ball assignments. Confirm the exact ordering code during library generation because CLG485-family devices can have package differences from other Zynq models. Keep high-speed routes over a continuous reference plane, minimize stubs, and provide unobstructed escape routing from the dense BGA array. Review the stack-up with the assembler before fixing impedance and via dimensions.
Budget power across the processor core, FPGA fabric, I/O, and memory interfaces instead of treating the SoC as one constant load. Activity-dependent dynamic current and voltage-dependent leakage can raise junction temperature above the simple average power implied by typical operation. Use the AMD data sheet for operating-mode currents, then validate the power system with processor-intensive, FPGA-intensive, and simultaneous I/O workloads. Place decoupling structures directly beneath the relevant supply balls and provide low-impedance planes for switching current.
The 19 mm by 19 mm CSPBGA has a compact thermal path but can concentrate heat across many simultaneously active balls and power domains. Use the package thermal information to determine whether a dedicated thermal pad pattern, exposed-package feature, thermal vias, or board-level heat spreading is required. Validate the solution at the maximum expected ambient temperature and maximum system activity. A design that is electrically correct at room temperature can still exceed the 100 °C junction limit in a sealed enclosure.
Thông tin tuân thủ
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were present in the product attributes used for this record. Confirm the applicable declarations and assembly requirements with AMD for the exact ordering code.