XC7Z014S-1CLG484I - 667MHz Zynq-7000 SoC | AMD | 65K Logic Cells
MPN: XC7Z014S-1CLG484I ✓ Hoạt độngXC7Z014S-1CLG484I Tóm tắt
A programmable system-on-chip combines a hard processor subsystem with programmable logic in one silicon device. The Zynq-7000 hierarchy places the ARM Cortex-A9 processing system above the SoC level, while the Artix-7 programmable logic provides parallel hardware, fixed-function interfaces, and customizable data-processing paths. This combination permits software-controlled Linux or real-time workloads to coexist with deterministic logic implemented beside the processor.
The defining features of the XC7Z014S include one ARM Cortex-A9 core, a 667 MHz processor rating, and 65K FPGA logic cells. Its CLG484 ball-grid-array package supports dense board-level integration without requiring separate processor and FPGA packages. CoreSight debug visibility, programmable-logic resources, and fixed hard blocks allow hardware-assisted acceleration, control, networking, and signal-processing systems to share one device.
Technically, the device combines a hardwired ARM Cortex-A9 processing subsystem with an FPGA fabric instead of implementing the processor in programmable logic. This architectural separation simplifies software execution and allows suitable control functions to run in the processor while latency-sensitive or parallel operations run in the programmable logic. Exact processor memory, I/O, transceiver, power, and timing limits must be selected from the complete AMD Zynq-7000 data sheet before schematic or timing signoff.
Typical uses include industrial control gateways, machine-vision systems, communications equipment, embedded data acquisition, and compact edge-computing platforms. The programmable logic can accelerate filtering, protocol handling, or interface conversion while the processor manages application software, networking, and configuration. The same architecture also suits camera, surveillance, and networking equipment requiring deterministic hardware alongside a general-purpose processor.
PCB design should follow the AMD package pinout files, power-sequencing requirements, decoupling recommendations, and high-speed routing guidance. Keep the processor and memory power domains properly conditioned, provide high-quality decoupling at supply pins, and route memory and programmable-logic interfaces with continuous reference planes. Bank-voltage and configuration requirements must also be checked against the selected board architecture.
This product record combines the manufacturer data-sheet entry, package information, ordering-code details, compatible family members, and practical implementation guidance. It supports faster evaluation of processor performance, logic capacity, package footprint, software support, and PCB migration while keeping procurement requests and technical validation connected to one concise engineering reference.
Bộ thay thế dễ dàng lắp đặt cho XC7Z014S-1CLG484I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7Z014S-1CLG484I (cùng hình factor và footprint) — khác nhau ở Device Type, Processor Frequency, Processor Core.
XC7Z014S-1CLG484C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z014S-2CLG484I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z014S-2CLG484C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC7Z014S-1CLG484I Tỷ lệ tối đa & tính chất điện
| Device Type | Zynq-7000 heterogeneous system-on-chip |
| FPGA Family | Artix-7 |
| Processor Core | 1 x ARM Cortex-A9 MPCore |
| Processor Frequency | 667 MHz |
| Programmable Logic Cells | 65K cells |
| Package Type | 484-CSPBGA |
| Package Dimensions | 19 mm x 19 mm |
| Trạng thái RoHS | Compliant |
| Debug Support | CoreSight |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân XC7Z014S-1CLG484I 19 mm x 19 mm
Cấu hình chân cho XC7Z014S-1CLG484I (19 mm x 19 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7Z014S-1CLG484I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7Z014S-1CLG484I phù hợp cho 6 Áp dụngs: Industrial Control Gateway, Machine Vision Processing, Communications Equipment, High-Speed Data Acquisition, Secure Network Appliance, Aerospace Control and Test System.
Industrial Control Gateway
The XC7Z014S-1CLG484I fits industrial gateways that combine deterministic interface handling with a general-purpose processor. Its 667 MHz ARM Cortex-A9 core can run network services, configuration logic, and supervisory software, while the 65K-cell programmable-logic fabric can implement protocol conversion, timing-critical acquisition, or motor-control assistance. Integrating both domains in one 19 x 19 mm CLG484 package reduces board partitioning and interprocessor communication. Engineers should allocate supply rails and I/O banks to match the selected voltage plan, then validate timing and thermal performance against the industrial enclosure environment.
Được đề xuất
Machine Vision Processing
The XC7Z014S-1CLG484I is useful in machine-vision systems where pixel handling and application control must coexist on one board. Parallel preprocessing, camera-interface timing, thresholding, and data movement can run in the 65K-cell Artix-7 fabric, while the 667 MHz ARM Cortex-A9 processor manages image algorithms, communication, and operating-system tasks. The single-package integration can reduce external FPGA-to-processor links and simplify synchronization. Pixel throughput, DDR memory bandwidth, camera-interface rates, and FPGA timing closure must be calculated before assigning functions to the two domains.
Được đề xuất
Communications Equipment
The XC7Z014S-1CLG484I suits communication equipment requiring flexible packet handling and embedded control in one programmable platform. The ARM Cortex-A9 processor can execute protocol stacks, management software, and secure-network services, while programmable logic can accelerate framing, traffic shaping, or physical-layer interfaces. Consolidation within a 484-CSPBGA package can lower component count and provide a deterministic hardware path beside the software domain. Designers must check transceiver availability, supported I/O standards, memory topology, and timing margins for the intended line rate before finalizing the architecture.
Được đề xuất
High-Speed Data Acquisition
The XC7Z014S-1CLG484I can serve as the central device in high-speed acquisition systems because it combines a 667 MHz processing system with 65K cells of programmable logic. The fabric can capture or pre-process multiple data streams using parallel pipelines, while the processor performs calibration, buffering, file handling, and remote control. This division of labor can improve determinism and reduce external interconnects. Engineers must verify available I/O, direct-memory-access capability, DDR bandwidth, clocking resources, and acquisition timing before committing to the device for a given sample rate.
Được đề xuất
Secure Network Appliance
The XC7Z014S-1CLG484I fits secure network appliances where packet processing, control-plane software, and hardware-assisted security can share one package. The Cortex-A9 processor can run network services, management code, and a real-time operating system, while programmable logic can accelerate packet filtering, hashing, encryption pipelines, or interface functions. This architecture permits flexible updates through software while retaining hardware performance for selected tasks. Board-level planning must address external memory, secure boot storage, power-loss behavior, thermal margins, and the separation required by the product's security architecture.
Được đề xuất
Aerospace Control and Test System
The XC7Z014S-1CLG484I can support compact aerospace control and test systems that need deterministic programmable logic beside a processor. The 667 MHz ARM Cortex-A9 subsystem can run supervisory software, configuration management, and test sequencing, while the Artix-7 fabric handles precise timing, sensor fusion preprocessing, or redundant interface logic. Consolidating these functions can reduce connector count and simplify synchronization between software and hardware. Because suitability depends on the exact environmental grade, radiation requirements, qualification status, and functional-safety program, engineers must obtain the applicable AMD documentation before design release.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7Z014S-1CLG484I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7Z014S-1CLG484C | XC7Z014S-2CLG484I | XC7Z014S-2CLG484C |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | 484-CSPBGA | 484-CSPBGA | 484-CSPBGA | 484-CSPBGA |
| Device Family | Zynq-7000 XC7Z014S | Zynq-7000 XC7Z014S | Zynq-7000 XC7Z014S | Zynq-7000 XC7Z014S |
| Processor Core | Single ARM Cortex-A9 MPCore | Single ARM Cortex-A9 MPCore | Single ARM Cortex-A9 | Single ARM Cortex-A9 |
| Programmable Logic Cells | 65K cells | 65K cells | 65K cells | 65K cells |
| Speed Grade | -1 | -1 | -2 | -2 |
| Temperature-Grade Suffix | I | C | I | C |
| Package Dimensions | 19 mm x 19 mm | 19 mm x 19 mm | 19 mm x 19 mm | 19 mm x 19 mm |
| Debug Support | CoreSight | CoreSight | CoreSight | CoreSight |
Bảo phân biệt quan trọng
- Closest same-speed same-package alternative (vsXC7Z014S-1CLG484C)
- Single-package processor and programmable-logic integration (vsXC7Z014S-2CLG484I)
- Exact-family footprint reuse (vsXC7Z014S-2CLG484C)
Ghi chú thiết kế
Use AMD's CLG484 package pinout files and UG865 package-data conventions when assigning balls. Confirm the package symbol, pin-1 orientation, and every power or ground connection against the selected device order code. Place the required decoupling capacitance close to its associated supply balls and preserve a continuous return path beneath high-speed interfaces. Because the device integrates both processor and programmable-logic domains, review the complete power-decoupling table rather than applying a generic BGA layout.
Plan the processor, memory, and programmable-logic supplies as separate domains until the AMD data sheet establishes their permitted sequencing and operating relationships. Check each rail against the XC7Z014S-1CLG484I voltage table, startup behavior, current limit, and tolerance. Do not combine rails solely because they share a package. Validate source impedance, regulator stability, startup order, and current margin for the actual processor, DDR-memory, and I/O configuration used by the board.
Thermal design must cover both the hard processor subsystem and programmable-logic activity because utilization changes silicon dissipation. Estimate worst-case power from the selected processor load, I/O activity, memory interfaces, and logic utilization rather than using a no-activity value. Confirm the package thermal data for the exact speed and temperature grade, then provide copper thermal paths, controlled airflow, or other enclosure cooling as required. Recalculate junction margin when ambient temperature or processor load exceeds the nominal design condition.
Do not treat a shared CLG484 package as proof that every XC7Z014S order code is functionally interchangeable. Speed grade, temperature grade, configuration, resource utilization, and tool targeting can affect timing, power, and migration. For an XC7Z014S-1 to XC7Z014S-2 change, rerun implementation timing and verify Vivado device targeting. For an I-to-C change, confirm the equipment's environmental requirements. Any candidate should also be checked against the complete manufacturer ordering information.
Route processor memory interfaces and programmable-logic interfaces according to their respective topology and length rules. Use adjacent supply and ground planes, avoid discontinuities across high-speed layers, and keep clock routes over uninterrupted reference planes. Watchdog, configuration, reset, and serial-debug signals also require deliberate placement so programming and recovery remain accessible in the assembled product. Complete signal-integrity simulation or timing analysis after the stackup and fanout are defined.
Thông tin tuân thủ
RoHS-compliant status is identified for the exact device in product-listing information. AEC-Q100 is not an appropriate qualification category for this programmable SoC. Other compliance declarations require confirmation from the current manufacturer documentation.