XC7Z015-2CLG485E - Dual ARM Cortex-A9 Zynq-7000 SoC, 74K Logic Cells | AMD
MPN: XC7Z015-2CLG485E ✓ Hoạt độngXC7Z015-2CLG485E Tóm tắt
A Zynq-7000 SoC sits in the hierarchy above a discrete microcontroller and above a discrete FPGA: it is a programmable logic device (FPGA and CPLD family) that integrates a hardwired application processor, so one silicon die carries both a software-execution environment and fabric-level parallel logic. AMD positions this combination for designs that need deterministic hardware acceleration alongside a familiar Linux or bare-metal software stack, without the two-chip power, area and inter-chip latency penalty of a processor-plus-FPGA design.
Key device features include two hard ARM Cortex-A9 cores with CoreSight debug support, a 74K-logic-cell FPGA fabric, integrated DDR memory controllers, and a high-speed serial transceiver capability typical of the mid-density Zynq members. The device is offered in the 485-ball chip-scale BGA package designated CLG485, a 19 x 19 mm surface-mount ball grid array with a 0.8 mm ball pitch that supports high-density PCB escape routing and multilayer board construction.
Technically, the device separates the programmable system (PS) from the programmable logic (PL) domains so that each can be optimized independently: the PS runs hard real-time control code and operating-system tasks, while the PL side handles pixel pipelines, protocol framing, sensor capture, DSP blocks and high-speed I/O that would starve a software-only processor. The Artix-7 fabric in this member is the smallest of the Zynq-7000 dual-core options, which keeps dynamic power and board cost low relative to the larger XC7Z020 and XC7Z030 members.
Typical uses include industrial machine-vision and inspection cameras, industrial protocol gateways, video capture and encode nodes, medical imaging peripherals, secure boot and encryption appliances, and industrial Ethernet or storage controllers where fabric logic handles wire-speed framing and the CPU manages the control plane.
When laying out the board, treat the CLG485 package as a full ball-grid escape problem: follow the AMD Zynq-7000 package pinout and PCB guidelines, provide the documented core supply rails with decoupling close to the balls, and keep high-speed transceiver and memory routing on properly referenced layers to preserve signal integrity and margin on the -2 speed grade.
This page consolidates distributor availability, drop-in variant matching, package and speed-grade comparisons, and board-level design guidance that the manufacturer data sheet alone does not present in a directly usable, side-by-side form.
Bộ thay thế dễ dàng lắp đặt cho XC7Z015-2CLG485E — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7Z015-2CLG485E (cùng hình factor và footprint) — khác nhau ở Mounting Type, Package, Device Type, Speed Grade, Debug Support.
XC7Z015-2CLG485I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z015-1CLG485C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z015-1CLG485E
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7Z015-1CLG485I
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC7Z015-2CLG485C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7Z015-2CLG485E Tỷ lệ tối đa & tính chất điện
| Device Type | Zynq-7000 SoC (FPGA SoC, programmable logic + application processor) |
| Processing System | Dual ARM Cortex-A9 MPCore with CoreSight debug |
| FPGA Fabric | Artix-7 class, 74K logic cells |
| Maximum CPU Frequency | 766 MHz |
| Speed Grade | -2 |
| Temperature Suffix | E (extended commercial grade) |
| Package Type | 485-CSPBGA (CLG485), 19 x 19 mm, surface mount |
| Ball Count | 485 |
| Kiểu lắp đặt | Surface Mount (BGA) |
| Debug Support | CoreSight on-chip debug |
| Product Status | Active; documented in the AMD Zynq-7000 SoC data sheet DS187 |
Hướng dẫn cấu hình chân XC7Z015-2CLG485E 485-cspbga (clg485), 19 x 19 mm, surface mount
Cấu hình chân cho XC7Z015-2CLG485E (485-cspbga (clg485), 19 x 19 mm, surface mount gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7Z015-2CLG485E.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7Z015-2CLG485E phù hợp cho 6 Áp dụngs: Industrial Machine-Vision Camera, Industrial Ethernet Protocol Gateway, Video Capture and Stream Encoding Node, Motion Control and Encoder Capture, Medical Imaging and Diagnostic Peripherals, Secure Boot and Encryption Appliance.
Industrial Machine-Vision Camera
The XC7Z015-2CLG485E is a natural fit for a smart camera node because the fabric can absorb pixel-pipeline work while the Cortex-A9 cores run image processing and control. With 74K logic cells and up to 766 MHz Cortex-A9 operation, the design can implement parallel image pre-processing, colour pipeline correction and interface timing directly in programmable logic, removing the need for a separate FPGA. The integrated memory controllers let the same die talk to DDR3L for frame buffering and to external flash for image storage. Compared with an MCU plus a discrete Artix-7, the single-die Zynq approach cuts board area, power and inter-chip latency, and the -2 speed grade gives the timing headroom needed for a full-rate sensor interface.
Được đề xuất
Industrial Ethernet Protocol Gateway
Use the XC7Z015-2CLG485E in a protocol converter where wire-speed framing must be deterministic and the control plane needs a full operating system. The PL domain can implement a dedicated MAC or fieldbus engine with fixed latency, while the dual Cortex-A9 cores handle routing tables, TLS termination and diagnostics. At 766 MHz the processor side has comfortable headroom for a Linux or embedded OS with network stacks, and the 74K logic cells are enough for multi-port framing, CRC and timestamping logic. Using one Zynq device rather than a processor plus a separate FPGA removes inter-chip PCIe or parallel-bus latency, reduces board area and simplifies the thermal design of a DIN-rail mounted unit.
Được đề xuất
Video Capture and Stream Encoding Node
The XC7Z015-2CLG485E suits a capture card that must ingest a high-speed video stream and reformat it before transmission. Parallel video timing, deinterlacing and colour-space conversion are placed in the programmable logic where they run at line rate with deterministic latency, and the Cortex-A9 cores execute the compression control loop, metadata and network transmission. With the -2 speed grade the fabric and processor both close timing with margin, which matters when a 4K stream leaves little slack for routing delay on a dense BGA board. The single-device approach also cuts standby power compared with a discrete Artix-7 paired with an application processor, and keeps the design compact enough for a small industrial or edge compute enclosure.
Được đề xuất
Motion Control and Encoder Capture
In a servo drive or multi-axis controller, the XC7Z015-2CLG485E can capture encoder and resolver signals in the fabric with deterministic, jitter-free timing and pass position data to the processor for the motion algorithm. That split is the key advantage: the fabric counts quadrature and captures latch positions at the -2 speed grade with fixed pipeline latency, while the dual Cortex-A9 cores run the current loop, trajectory planner and fieldbus stack. A 74K logic cell budget is ample for encoder decoding plus PWM generation for several axes. Because the same die also drives the logic section, the board needs only one high-speed BGA instead of a processor and an FPGA, simplifying a compact drive module where copper area and thermal headroom are limited.
Được đề xuất
Medical Imaging and Diagnostic Peripherals
The XC7Z015-2CLG485E can be used in ultrasound or diagnostic peripherals that must acquire sensor data while remaining deterministic and low-noise. The programmable logic handles the analog front-end sampling, gain control and frame synchronisation, and the Cortex-A9 cores manage the image reconstruction pipeline, user interface and secure data handling. Up to 766 MHz processor operation supports real-time processing of high-volume frame data, and the integrated DDR interface removes the need for a separate memory controller. Building the acquisition pipeline in fabric rather than in a separate chip reduces the number of high-speed interfaces on the board, which helps both signal integrity and electromagnetic compliance in a medical enclosure.
Được đề xuất
Secure Boot and Encryption Appliance
The XC7Z015-2CLG485E works well in a security appliance where cryptographic engines must run at wire speed while the control software handles key management and policy. Hardware acceleration blocks and custom datapaths in the 74K logic cell fabric can implement hash, cipher and record processing in parallel, and the dual Cortex-A9 cores at up to 766 MHz execute the protocol stack and management plane. The single-device architecture reduces the attack surface compared with a split processor-plus-FPGA board and removes the inter-chip link that would otherwise need protection. The same CLG485 footprint also allows a later move to the XC7Z015-2CLG485I industrial-grade variant for deployed security equipment in uncontrolled environments.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7Z015-2CLG485E — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7Z015-2CLG485I | XC7Z015-2CLG485C | XC7Z015-1CLG485C | XC7Z015-1CLG485E | XC7Z015-1CLG485I |
|---|---|---|---|---|---|---|
| Package | 485-CSPBGA (CLG485), 19 x 19 mm | 485-CSPBGA (CLG485) - same | 485-CSPBGA (CLG485) - same | 485-CSPBGA (CLG485) - same | 485-CSPBGA (CLG485) - same | 485-CSPBGA (CLG485) - same |
| Brand | AMD (Xilinx) | AMD (Xilinx) | AMD (Xilinx) | AMD (Xilinx) | AMD (Xilinx) | AMD (Xilinx) |
| Speed Grade | -2 | -2 | -2 | -1 (slower than -2) | -1 (slower than -2) | -1 (slower than -2) |
| Temperature Grade Suffix | E (extended commercial) | I (industrial) | C (commercial) | C (commercial) | E (extended commercial) | I (industrial) |
| FPGA Logic Cells | 74K | 74K | 74K | 74K | 74K | 74K |
| Processing System | Dual ARM Cortex-A9 MPCore with CoreSight | Dual ARM Cortex-A9 MPCore with CoreSight | Dual ARM Cortex-A9 MPCore with CoreSight | Dual ARM Cortex-A9 MPCore with CoreSight | Dual ARM Cortex-A9 MPCore with CoreSight | Dual ARM Cortex-A9 MPCore with CoreSight |
| Device Family | Zynq-7000 SoC (Artix-7 fabric) | Zynq-7000 SoC (Artix-7 fabric) | Zynq-7000 SoC (Artix-7 fabric) | Zynq-7000 SoC (Artix-7 fabric) | Zynq-7000 SoC (Artix-7 fabric) | Zynq-7000 SoC (Artix-7 fabric) |
Bảo phân biệt quan trọng
- Integrated dual-core ARM Cortex-A9 with 74K logic cells on one die (vsXC7Z020-1CLG400C)
- -2 speed grade operation at up to 766 MHz (vsXC7Z015-1CLG485C)
- Extended commercial temperature option for cost-sensitive non-industrial builds (vsXC7Z015-2CLG485I)
- Software-plus-hardware partitioning without a second chip (vsXC7Z012-CLG485)
Ghi chú thiết kế
The CLG485 package is a 485-ball chip-scale BGA on a 19 x 19 mm outline, so the board layout must be driven by the AMD package pinout file rather than by a generic symbol. Follow the AMD Zynq-7000 package pinout files (TXT and CSV, format described in UG865) and the XC7Z015-CLG485 placement diagram in UG585 when assigning balls, and follow the AMD printed circuit board design guidelines for via-in-pad, solder mask and land pattern options. Escape routing of 485 signals on a dense multilayer board typically requires micro-vias and a via-in-pad filled with copper paste, which must be agreed with the assembler before release.
The Zynq-7000 device splits supply into processing system and programmable logic rails, and the AMD data sheet DS187 lists the recommended operating conditions for each. Provide each rail from a dedicated regulator with local ceramic decoupling placed directly at the corresponding ball group, and keep the return path continuous through the ground balls and any exposed thermal structure. Estimated: with a 12 V input and a 3.3 V PL rail at 1.5 W of dissipated power, a four-layer board with a modest copper pour may run tens of degrees above ambient at the die, so verify junction temperature margin at the -2 speed grade with the worst-case fabric activity rather than at idle.
The -2 speed grade raises the timing budget pressure on both the Cortex-A9 cores and the fabric, so route high-speed memory and transceiver signals on continuous inner layers with a solid reference plane and avoid any split across the board. Keep DDR data and strobe groups matched within the length tolerance stated in the AMD memory interface requirements, and use the recommended ball assignments for the Zynq-7000 memory interface rather than reassigning them for easier routing, since the placement diagrams are deliberately optimized for signal integrity. Where the design uses the high-speed serial transceivers, follow the AMD transceiver layout guidance for reference planes and via stitching around the transceiver region.
Do not assume a same-ball-count device is a substitute: the XC7Z012-CLG485 also uses a 485-ball package but is a different device with fewer resources, and the XC7Z030-SBG485 uses a different ball map with pins such as MGTVCCAUX and MGTAVTTRCAL connected where the XC7Z015-CLG485 leaves them not connected. Confirm the exact device and package in the AMD pinout files before releasing a PCB, and do not mix -1 and -2 speed-grade assumptions in one design because the PS and PL timing margins differ. Finally, check the XDC constraints and the generated bitstream against the exact MPN and speed grade you intend to populate.
Zynq-7000 power is shared between the always-on processing system and the activity-dependent programmable logic, so a design that idles in software but runs fabric flat out can dissipate far more than a typical processor estimate suggests. Validate thermal performance with a worst-case workload on the -2 grade, and consider placing the device on a multilayer board with a solid ground pour under the BGA array, since the CLG485 outline offers limited continuous copper for heat spreading. Keep the DDR3L memory and any QSPI flash on the opposite side of the board or thermally separated from the Zynq die to prevent memory temperature rise from driving further power increase.
Thông tin tuân thủ
No explicit RoHS, REACH, lead-free or halogen-free statement appears in the manufacturer documentation retrieved for this part; values are therefore recorded as unknown rather than assumed. The device is not an automotive-qualified part, so AEC-Q100 is marked not applicable. Product status is taken from the AMD Zynq-7000 SoC data sheet DS187, which lists the XC7Z015 as a documented Zynq-7000 member.