XC7Z035-1FFG900I - 275K Logic Cell Zynq-7000 SoC | AMD
MPN: XC7Z035-1FFG900I ✓ Hoạt độngXC7Z035-1FFG900I Tóm tắt
A Zynq adaptive SoC combines a programmable logic subsystem with a hard processor subsystem on one silicon device. In the broader semiconductor hierarchy, it belongs to the SoC category, combining a microprocessor, FPGA fabric, memory controllers, programmable I/O, and dedicated processing resources. This integration allows control logic, application processing, video acceleration, and signal processing to operate within one device and package.
The principal features of the XC7Z035-1FFG900I include two ARM Cortex-A9 cores, CoreSight debug support, 275,000 FPGA logic cells, 18,022 Kb of block RAM, and 900 DSP slices. The 900-FCBGA package offers a large, fine-pitch interconnect for demanding designs requiring extensive parallel processing, high-speed memory interfaces, or multiple programmable I/O resources.
The device is manufactured on a 28 nm process and operates from a 1 V core supply. Its heterogeneous architecture places programmable fabric and dedicated DSP blocks beside the ARM processing system. Software developers can execute an operating system or bare-metal code on the Cortex-A9 subsystem while FPGA fabric implements accelerators, interfaces, protocol logic, and real-time datapaths.
Typical uses include industrial machine vision, networked video processing, communications infrastructure, high-performance embedded control, software-defined radio, and edge-AI systems. The dual Cortex-A9 configuration supports concurrent application tasks, while 900 DSP slices accelerate filtering, transforms, and other mathematically intensive operations. The large FPGA fabric is particularly useful when a fixed-function processor or discrete FPGA combination would consume excessive board area.
Design with the complete 900-ball package rather than assuming a simpler pin-compatible footprint. Ball assignment, power rails, high-speed routing, decoupling, and exposed-pad or thermal requirements must follow the AMD package documentation and reference design. The 1 speed grade and industrial temperature designation should be considered during timing closure, especially where processor-to-FPGA interfaces or memory interfaces operate at high data rates.
This product page combines the verified device identity, package characteristics, programmable resources, and processor architecture with practical replacement, comparison, and design guidance. It distinguishes genuine package-compatible options from devices that use different Zynq package suffixes and therefore require a PCB-level redesign.
Bộ thay thế dễ dàng lắp đặt cho XC7Z035-1FFG900I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7Z035-1FFG900I (cùng hình factor và footprint) — khác nhau ở Package, Processor Core, Logic Cells, Product Type, Speed Grade.
XC7Z035-2FFG900I
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC7Z035-3FFG900I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7Z035-L2FFG900I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7Z035-2FFG900C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7Z035-3FFG900C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7Z035-1FFG900I Tỷ lệ tối đa & tính chất điện
| Device Type | Zynq-7000 adaptive system-on-chip |
| FPGA Family | Kintex-7 |
| Processor Core | Dual ARM Cortex-A9 MPCore |
| Processor Frequency | 667 MHz |
| Debug Support | CoreSight |
| Logic Cells | 275,000 cells |
| Block RAM | 18,022 Kb |
| DSP Slices | 900 slices |
| Process Technology | 28 nm |
| Core Supply Voltage | 1 V |
| Hộp | 900-FCBGA, 31 x 31 mm |
| Package Pin Count | 900 balls |
| Kiểu lắp đặt | Surface mount |
| Speed Grade | -1 |
| Temperature Range | -40 °C to +100 °C junction |
Hướng dẫn cấu hình chân XC7Z035-1FFG900I 900 balls
Cấu hình chân cho XC7Z035-1FFG900I (900 balls gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7Z035-1FFG900I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7Z035-1FFG900I phù hợp cho 6 Áp dụngs: Industrial Machine Vision, Embedded Video Processing, Communications Infrastructure, Software-Defined Radio, High-Speed Data Acquisition, Industrial Edge Control.
Industrial Machine Vision
The XC7Z035-1FFG900I fits industrial camera systems that combine image acquisition, preprocessing, and high-level control. The dual Cortex-A9 processor at 667 MHz can run operating-system software, communications, and machine-vision algorithms, while 900 DSP slices accelerate filtering and pixel operations. Its 275,000 logic cells provide parallel acquisition, sensor synchronization, and interface logic without requiring a separate FPGA. The industrial temperature range of -40 °C to +100 °C junction supports demanding factory environments, although designers must use the 900-FCBGA footprint, approved power rails, and complete signal-integrity layout from AMD documentation.
Được đề xuất
Embedded Video Processing
The XC7Z035-1FFG900I is suitable for video systems that divide control, networking, and pixel-level processing across hardware and software. Its dual ARM Cortex-A9 cores can manage operating-system tasks and control traffic, while the FPGA fabric and 900 DSP slices implement filters, scaling, color conversion, and real-time datapaths. The 18,022 Kb of block RAM provides substantial on-chip buffering for image lines and working frames. Compared with a processor-only implementation, this architecture reduces external component count and improves deterministic parallel throughput. Engineers should match external memory timing to AMD specifications and preserve the package's demanding high-speed routing and power-delivery requirements.
Được đề xuất
Communications Infrastructure
The XC7Z035-1FFG900I can implement a compact communications node by placing protocol engines, packet processing, and physical-layer interfaces in programmable logic while the Cortex-A9 subsystem handles management and application services. The 275,000 logic cells support parallel datapaths, and the 900 DSP slices assist filtering or modulation tasks. Its 667 MHz dual-core processor provides sufficient control parallelism for networking operating systems or custom firmware. A new design should define memory topology, SerDes or transceiver requirements, clocking, and packet-buffer capacity before assigning FPGA resources. The -1 industrial grade is appropriate where the junction temperature can remain within the specified -40 °C to +100 °C range.
Được đề xuất
Software-Defined Radio
The XC7Z035-1FFG900I is appropriate for radio systems requiring flexible waveform handling, rapid configuration, and programmable signal processing. FPGA resources can implement filters, digital downconversion, and interface logic, while the Cortex-A9 processors manage control software and protocol stacks. The device provides 900 DSP slices and 18,022 Kb of block RAM for parallel signal-chain workloads, and its 28 nm process supports a useful balance between performance and power. Real-time systems must carefully constrain logic timing and memory interfaces at the selected 667 MHz processor operating point. RF conversion, reference clocks, high-speed inputs, and sensitive analog layouts remain separate board-level design responsibilities.
Được đề xuất
High-Speed Data Acquisition
The XC7Z035-1FFG900I supports acquisition systems that must transfer and process data concurrently through programmable logic. Parallel input interfaces can feed the FPGA fabric, block RAM can buffer bursts, and the dual Cortex-A9 subsystem can coordinate acquisition, storage, and host communication. Its 275,000 logic cells and 900 DSP slices allow filtering or transformation to occur closer to the source of data, reducing repeated transfers to external processors. Timing closure depends on the selected -1 speed grade and the pin arrangement of the 900-ball package. Use AMD reference material for clocking, memory interfaces, pin constraints, and power sequencing rather than relying on generic BGA layout conventions.
Được đề xuất
Industrial Edge Control
The XC7Z035-1FFG900I fits edge-control systems that need deterministic hardware timing alongside a capable embedded processor. The Cortex-A9 cores can execute control algorithms, communicate with operators, and supervise system health, while programmable logic handles motor timing, interlocks, or high-speed sensor acquisition. With 275,000 logic cells and 900 DSP slices, the device can consolidate functions that would otherwise occupy a microprocessor and separate FPGA. Its industrial junction-temperature specification supports factory deployment when the board and enclosure manage heat correctly. Production designs must review watchdog behavior, safe-state logic, supply sequencing, and functional safety implications at the complete system level rather than assigning them solely to the SoC.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7Z035-1FFG900I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7Z035-2FFG900I | XC7Z035-3FFG900I | XC7Z035-L2FFG900I | XC7Z035-2FFG900C | XC7Z035-3FFG900C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 900-FCBGA (31 x 31 mm) | 900-FCBGA (31 x 31 mm) | 900-FCBGA (31 x 31 mm) | 900-FCBGA (31 x 31 mm) | 900-FCBGA (31 x 31 mm) | 900-FCBGA (31 x 31 mm) |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Processor Configuration | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore |
| Processor Frequency | 667 MHz | Approximately 800 MHz | Approximately 877 MHz | Approximately 800 MHz | Approximately 800 MHz | Approximately 877 MHz |
| Temperature Grade | Industrial, -40 °C to +100 °C junction | Industrial | Industrial | Extended temperature | Commercial | Commercial |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
Bảo phân biệt quan trọng
- Combines programmable fabric and a dual-core processor in one package (vsXC7Z035-2FFG900I)
- Industrial-temperature package-compatible option (vsXC7Z035-2FFG900C)
- Consistent 900-ball PCB platform (vsXC7Z035-L2FFG900I)
Ghi chú thiết kế
Evaluate the XC7Z035-1FFG900I across processor, memory, I/O, and auxiliary power rails using the operating conditions in AMD data sheet DS191. The 1 V core requirement does not represent the total board power because the 900-FCBGA device also consumes power in peripheral and I/O domains. Estimate utilization at the 667 MHz operating point, include worst-case FPGA toggling, and verify that the power regulator, decoupling network, and package planes remain within their current and thermal limits.
Use the complete 900-FCBGA land pattern and the AMD package pinout files when assigning every ball. Place power and ground connections directly to their corresponding balls with the shortest return paths possible, and distribute decoupling close to the device. High-speed memory and interface routes require controlled topology, reference planes, and length management. Do not substitute a 676-ball land pattern; FFG676 and FFG900 parts can share the XC7Z035 family name but require different PCB layouts.
Create a board-level thermal model that includes processor activity, FPGA utilization, I/O loading, ambient temperature, and enclosure conditions. Spread heat through the 900-FCBGA construction and provide copper and airflow appropriate to the board stack-up. The listed -40 °C to +100 °C range applies to device junction temperature, not to ambient temperature. Validate the hottest operating mode and account for neighboring component heat before establishing the production thermal limit.
Avoid confusing a package-compatible speed-grade change with an unconditional substitution. Moving from XC7Z035-1FFG900I to a 2 or 3 speed grade can change processor timing, dynamic power, and external-interface margins. Moving from the I suffix to the C suffix can reduce the permitted temperature range. Confirm the exact ordering code, rerun timing and power analysis, and verify boot or configuration compatibility before releasing a replacement to production.
Thông tin tuân thủ
The manufacturer device identity, package, architecture, process technology, and temperature grade are established. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current AMD product documentation or supplier declaration.