XC7Z035-2FFG676E - 275K Logic Cell Zynq SoC | AMD
MPN: XC7Z035-2FFG676E ✓ Hoạt độngXC7Z035-2FFG676E Tóm tắt
A Zynq system-on-chip is an FPGA and SoC architecture that combines a hardwired ARM processing system with programmable logic fabric. The processing system executes operating-system-level software and controls system tasks, while the programmable logic implements parallel hardware, custom interfaces, signal processing, or accelerator functions. This division allows software and hardware responsibilities to be partitioned efficiently within one silicon device.
The XC7Z035 provides 275K logic cells and an 800 MHz dual-core Cortex-A9 configuration. Its Zynq-7000 platform integrates processing, programmable logic, memory interfaces, and programmable peripherals on one package. The device also includes CoreSight technology for debug and trace-related functions, making the SoC suitable for complex embedded control systems that benefit from deterministic hardware acceleration.
The -2 portion of the ordering code identifies speed grade 2, while the E suffix identifies the extended-temperature variant. The FFG676 package provides 676 ball-grid-array contacts in a 27 x 27 mm footprint. This high-pin-count package supports extensive connectivity between the processing system, programmable logic, external memory, and board-level peripherals, but it also requires careful ball assignment, power planning, and multilayer PCB layout.
Typical uses include industrial automation, embedded vision, communications equipment, test and measurement, and networked control systems. In these applications, the Cortex-A9 cores can run control software or an operating system while the Kintex-7 programmable logic accelerates data acquisition, signal processing, protocol handling, or other parallel workloads. The architecture is particularly useful when designers want a compact embedded system with fewer inter-chip interfaces than a separate processor and FPGA.
The principal design consideration is the complexity of a 676-pin FCBGA package. Power, ground, decoupling, high-speed routing, thermal management, and manufacturing capability must be planned before schematic capture. Differential interfaces and processor-to-memory connections require exact reference-design stackups and routing guidance from the AMD Zynq-7000 documentation.
This page combines the verified device identity, package information, ordering-code details, comparison data, and practical implementation guidance into a compact engineering reference for evaluating the XC7Z035-2FFG676E.
Bộ thay thế dễ dàng lắp đặt cho XC7Z035-2FFG676E — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7Z035-2FFG676E (cùng hình factor và footprint) — khác nhau ở Package, Speed Grade, Temperature Grade.
XC7Z035-1FFG676I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z035-2FFG676I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z035-1FFG676C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z035-3FFG676E
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC7Z035-L2FFG676I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC7Z035-2FFG676E Tỷ lệ tối đa & tính chất điện
| Device Type | Zynq-7000 Kintex-7 FPGA system-on-chip |
| FPGA Logic Cells | 275K logic cells |
| Processor Core | Dual-core Arm Cortex-A9 MPCore |
| Processor Clock | 800 MHz |
| Programmable Logic Type | Kintex-7 FPGA |
| Debug and Trace | CoreSight |
| Hộp | 676-pin FCBGA, 27 x 27 mm |
| Ball Count | 676 balls |
| Speed Grade | Grade 2 |
| Temperature Grade | Extended |
Hướng dẫn cấu hình chân XC7Z035-2FFG676E 676-pin fcbga, 27 x 27 mm
Cấu hình chân cho XC7Z035-2FFG676E (676-pin fcbga, 27 x 27 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7Z035-2FFG676E.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7Z035-2FFG676E phù hợp cho 6 Áp dụngs: Industrial Automation and Control, Embedded Vision and Image Processing, Communications and Network Equipment, Test and Measurement Instrumentation, Aerospace and Defense Platforms, High-Performance Embedded Processing.
Industrial Automation and Control
The XC7Z035-2FFG676E fits industrial controllers that divide real-time work between the dual-core Arm Cortex-A9 subsystem and programmable logic. The processors can run control software, communications, diagnostics, and an operating system, while the 275K logic cells can implement deterministic timing, I/O aggregation, motion-related functions, or protocol acceleration. In a practical design, programmable logic handles time-critical acquisition and control paths, and the processor manages configuration, networking, and supervisory functions. This architecture reduces external bus traffic between a processor and FPGA, which can simplify synchronization and improve responsiveness. The grade-2 timing option provides additional margin for demanding control interfaces, while the E ordering suffix supports extended-temperature requirements. Designers must still validate the complete system timing, power envelope, and enclosure temperature against the AMD device specifications.
Được đề xuất
Embedded Vision and Image Processing
The XC7Z035-2FFG676E is suitable for embedded vision systems where parallel pixel processing benefits from programmable logic while the 800 MHz dual-core Arm Cortex-A9 subsystem handles configuration and higher-level control. Logic fabric can implement capture pipelines, filtering, thresholding, color processing, or interface conversion close to the image sensor, reducing the amount of data transferred to external memory. The Cortex-A9 cores can coordinate camera control, networking, diagnostics, and application software. With 275K logic cells, the device balances programmable-logic capacity against processor integration in a single 676-pin FCBGA package. A practical implementation should reserve logic resources for timing-critical image paths while leaving the processor subsystem available for operating-system tasks and supervisory control. Sensor interface timing, memory bandwidth, power, and thermal performance must be verified together because high-throughput image pipelines can increase switching activity and junction temperature.
Được đề xuất
Communications and Network Equipment
The XC7Z035-2FFG676E can support communications equipment that benefits from combining packet-processing software with hardware-assisted data paths. The dual-core Cortex-A9 subsystem can execute networking functions, protocol state machines, management software, and diagnostics, while the 275K Kintex-7 logic cells can implement parallel framing, classification, compression, encryption acceleration, or custom interface adaptation. Placing those functions in one SoC can reduce pin-level communication between a discrete processor and FPGA and provide a unified configuration and debug environment. For a line-card or embedded gateway design, the processor side can manage the control plane while programmable logic handles deterministic data movement between network interfaces and external memory. The 800 MHz processor rating supports responsive control tasks, and grade-2 timing can benefit high-speed fabric interfaces. Final deployment still requires protocol-specific timing analysis, memory-bandwidth budgeting, thermal testing, and review of the relevant AMD interface timing constraints.
Được đề xuất
Test and Measurement Instrumentation
The XC7Z035-2FFG676E fits test and measurement instruments that require flexible acquisition, trigger, signal-processing, and user-interface logic alongside a processor. Programmable logic can implement counters, timing units, digital pattern generation, trigger logic, data formatting, and high-speed capture paths, while the dual-core Arm Cortex-A9 subsystem runs control software, calibration logic, networking, and graphical interfaces. The 275K logic cells allow substantial custom instrumentation to be consolidated into the same device as the control processor. In a bench instrument, FPGA logic can capture and process data continuously while the processor handles calibration, results storage, and remote control, reducing transfers to an external accelerator. The grade-2 device can provide useful timing margin on synchronous acquisition paths. Engineers should use the AMD reference design and device timing reports for all high-speed interfaces, and should verify thermal behavior under sustained full-rate acquisition rather than relying only on idle power estimates.
Được đề xuất
Aerospace and Defense Platforms
The XC7Z035-2FFG676E can be evaluated for aerospace, defense, and rugged embedded platforms where programmable logic must coexist with a processor-based control architecture. The Zynq-7000 architecture allows trusted control software to run on the Cortex-A9 subsystem while programmable logic implements specialized I/O, data acquisition, fault monitoring, or mission-specific processing. Its 275K logic cells and 800 MHz processor provide substantial integration for compact electronic modules, and the E ordering suffix denotes the extended-temperature family variant. For an aerospace application, the exact device qualification, radiation, temperature, screening, and procurement requirements must be checked independently; the XC7Z035-L2FFG676I ordering option may be relevant when the automotive L2 designation matches the intended sourcing program. Board implementation should include controlled clocking, redundant power analysis, controlled-impedance routing, and thermal verification for the 27 x 27 mm FCBGA footprint.
Được đề xuất
High-Performance Embedded Processing
The XC7Z035-2FFG676E is appropriate for embedded systems that need Linux-class or bare-metal processing alongside dedicated programmable logic. The two Cortex-A9 cores provide a conventional processor execution environment, including software services and control tasks, while the Kintex-7 fabric adds deterministic parallel processing and flexible peripheral interfaces. A common architecture places the processor subsystem in control of boot software, networking, and application services, then offloads latency-sensitive tasks such as checksum generation, compression, filtering, or custom bus bridges to programmable logic. This combination can lower external component count compared with a discrete processor-FPGA design and keeps high-bandwidth data paths close to the processor interfaces. The 275K logic-cell budget allows meaningful hardware specialization, while grade-2 timing provides a performance option for demanding designs. Software developers must coordinate memory mapping, interrupt handling, cache coherency considerations, and peripheral ownership between the two subsystems.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7Z035-2FFG676E — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7Z035-1FFG676I | XC7Z035-2FFG676I | XC7Z035-1FFG676C | XC7Z035-3FFG676E | XC7Z035-L2FFG676I |
|---|---|---|---|---|---|---|
| Package | 676-pin FCBGA, 27 x 27 mm | 676-pin FCBGA, 27 x 27 mm | 676-pin FCBGA, 27 x 27 mm | 676-pin FCBGA, 27 x 27 mm | 676-pin FCBGA, 27 x 27 mm | 676-pin FCBGA, 27 x 27 mm |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Zynq-7000 SoC | Zynq-7000 SoC | Zynq-7000 SoC | Zynq-7000 SoC | Zynq-7000 SoC | Zynq-7000 SoC |
| FPGA Logic Cells | 275K logic cells | 275K logic cells | 275K logic cells | 275K logic cells | 275K logic cells | 275K logic cells |
| Processor Core | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore | Dual-core Arm Cortex-A9 MPCore |
| Processor Clock | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 800 MHz |
| Speed Grade | Grade 2 | Grade 1 | Grade 2 | Grade 1 | Grade 3 | L2 designation |
| Temperature Ordering Suffix | E, extended | I, industrial | I, industrial | C, commercial | E, extended | I, industrial |
| Programmable Logic Type | Kintex-7 FPGA | Kintex-7 FPGA | Kintex-7 FPGA | Kintex-7 FPGA | Kintex-7 FPGA | Kintex-7 FPGA |
| Debug Support | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
Bảo phân biệt quan trọng
- Grade-2 timing with extended-temperature ordering (vsXC7Z035-1FFG676I)
- Identical core processing and programmable-logic resources (vsXC7Z035-2FFG676I)
- Extended-temperature designation (vsXC7Z035-1FFG676C)
- Lower timing grade than the grade-3 family option (vsXC7Z035-3FFG676E)
Ghi chú thiết kế
Plan the XC7Z035-2FFG676E power tree before signal integrity work because the processor subsystem, programmable logic, memory interfaces, and I/O rails have different dynamic-current behavior. Use the AMD Zynq-7000 power-supply and decoupling guidance to define the rail sequence, voltage tolerances, and bypass network. Place bulk and high-frequency decoupling capacitors close to their associated supply and ground balls, and use the package-ball map to identify every supply ball rather than relying only on a schematic page count.
The 676-pin FCBGA footprint requires a multilayer PCB with a controlled-impedance stackup and short escape routes from the device balls. Follow the AMD package design guidance for ball-pitch assumptions, via construction, solder-mask design, and assembly process. Separate processor, memory, programmable-logic, and high-speed I/O return paths where practical, and avoid routing memory or differential signals across noisy power-regulator and clock-distribution areas.
Evaluate junction temperature with the actual processor activity, programmable-logic utilization, I/O toggle rate, and ambient temperature rather than a single nominal power value. The 27 x 27 mm FCBGA can move significant heat into the board through its solder balls, so thermal vias, a suitable ground-plane construction, and enclosure ventilation may be required. Estimate worst-case dissipation from the AMD power methodology and validate it in a populated system operating at sustained high utilization.
Implement external-memory and other high-speed interfaces with the exact reference stackup and routing constraints in the AMD Zynq-7000 design documentation. Match length and propagation delay only after accounting for package and board effects, and use the manufacturer's IBIS or SPICE models for key interface simulations where available. Keep configuration, JTAG, clock, reset, and dedicated control pins away from aggressi switching return paths to reduce false transitions and configuration errors.
Do not substitute a different XC7Z035 suffix solely because the ball package appears identical. Speed grade changes timing characteristics and possibly power behavior, while I, C, E, and L2 suffixes can change temperature or qualification requirements. For a replacement, compare the exact ordering table, device Errata, PCB revisions, pin definitions, interface timing constraints, and intended operating environment before approving the substitution.
Thông tin tuân thủ
The E suffix is identified as the extended-temperature ordering variant. Exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations must be confirmed for the exact suffix and package from AMD or the authorized supply channel.