XC9572-10PQ100C - 10 ns 72-Macrocells CPLD | AMD Xilinx
MPN: XC9572-10PQ100C ✓ Hoạt độngXC9572-10PQ100C Tóm tắt
A CPLD is a programmable logic device that combines programmable logic arrays, a programmable interconnect, and configuration memory into one integrated circuit. In the product hierarchy, the XC9572 belongs to the complex programmable logic device family, which sits between simple programmable logic devices and larger FPGAs. CPLDs are commonly used for control logic, interface adaptation, state machines, bus arbitration, and glue-logic functions.
The XC9500 architecture provides four 54V18 function blocks, 72 macrocells, 1,600 usable gates, and 72 user I/O pins. Its in-system programming capability allows a system to be configured or updated without removing the device from the circuit. The -10 speed designation corresponds to a maximum propagation delay of 10 ns, while the commercial temperature grade is identified in the product listings.
The XC9572-10PQ100C is suitable for designs requiring moderate logic density and fast control-path decisions rather than large FPGA fabric. Its 100-pin PQFP package provides a conventional gull-wing lead arrangement and is useful for prototype boards, industrial control systems, communications equipment, instrumentation, and legacy equipment upgrades. The device also supports at least 10,000 program and erase cycles for applications that require repeated in-system reconfiguration.
Typical uses include peripheral interfacing, bus decoding, machine-control sequencing, test instrumentation, embedded system glue logic, and communications control functions. In these applications, the CPLD can consolidate multiple fixed-function gates into one programmable device while preserving a straightforward package and deterministic logic implementation.
Designers should treat the 10 ns propagation delay as a timing requirement rather than a complete system timing budget. External clock, setup, hold, output loading, and interconnect requirements must be evaluated in the implementation environment. Confirm the pin assignment, power requirements, and supported programming device before committing a new PCB layout.
This product summary combines the manufacturer's XC9572 data sheet with distributor and cross-reference information to provide practical guidance for sourcing, comparison, and design review. It highlights the device's macrocell capacity, I/O availability, timing grade, package, and in-system programming characteristics.
Bộ thay thế dễ dàng lắp đặt cho XC9572-10PQ100C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC9572-10PQ100C (cùng hình factor và footprint) — khác nhau ở Package.
XC9572-10PQ100I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC9572-10PQG100I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC9572-7PQ100C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC9572-10PQ100C Tỷ lệ tối đa & tính chất điện
| Device Type | Complex Programmable Logic Device (CPLD) |
| Architecture | XC9500 |
| Macrocells | 72 |
| Usable Gates | 1,600 gates |
| Function Blocks | 4 x 54V18 |
| Maximum Propagation Delay | 10 ns |
| Tần số xung maksimum | 66.7 MHz |
| User I/O Pins | 72 pins |
| Programmable Logic | In-system programmable |
| Program and Erase Endurance | At least 10,000 cycles |
| Data Retention | 20 years |
| ESD Protection | Exceeding 2,000 V |
| Maximum Supply Voltage | 5.25 V |
| Điện áp cung cấp | 2.5 V internal core |
| Temperature Grade | Commercial |
| Hộp | 100-pin PQFP |
| Package Code | PQ100 |
| Terminal Count | 100 pins |
| Lead Form | Gull wing |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân XC9572-10PQ100C pq100
Cấu hình chân cho XC9572-10PQ100C (pq100 gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC9572-10PQ100C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC9572-10PQ100C phù hợp cho 6 Áp dụngs: Industrial machine control logic, Communications interface adaptation, Test and measurement front-end, Programmable peripheral interface, Aerospace and defense control modules, Medical equipment control.
Industrial machine control logic
The XC9572-10PQ100C is well suited to machine-control sequencing because its 72 macrocells can consolidate state machines, interlocks, input decoding, and actuator-command logic into one programmable device. A 10 ns propagation-delay class supports deterministic control paths, while 72 user I/O pins provide substantial board-level connectivity. In-system programming allows production test or field upgrades without removing the CPLD. The commercial-grade variant is appropriate for ambient conditions inside its specified commercial temperature range; use the industrial ordering option when wider temperature coverage is required.
Được đề xuất
Communications interface adaptation
The XC9572-10PQ100C can serve as interface glue logic in communications equipment where legacy bus formats, framing signals, and status indicators must be adapted to a newer controller. Its 72 macrocells and 1,600 usable gates provide enough capacity for multiple state machines and combinational functions without an FPGA-level design. The 10 ns timing class is useful for control and decode paths, while the 72 I/O pins reduce the need for external buffers. Designers should verify clock, setup, hold, and I/O standards against the DS065 electrical tables.
Được đề xuất
Test and measurement front-end
The XC9572-10PQ100C can implement measurement sequencing, trigger conditioning, range selection, and data-acquisition control in a test instrument. Multiple counter, latch, and decode functions can be placed within its 72 macrocells, while the 10 ns propagation-delay class helps maintain precise relationships between control signals. The device is also appropriate for legacy instrument upgrades that require reprogrammable logic without changing the existing PQFP-100 board footprint. Board-level timing remains critical and should include external acquisition, clock, and driver delays.
Được đề xuất
Programmable peripheral interface
In peripheral-interface designs, the XC9572-10PQ100C can consolidate address decoding, register latching, interrupt generation, and bus arbitration into a single programmable component. Its 72 user I/O pins accommodate substantial bidirectional and dedicated control connectivity, and its in-system programming characteristic supports configuration updates during production or maintenance. The four 54V18 function blocks allow logic to be distributed across a moderately sized architecture. Designers should use the data-sheet pin table to avoid conflicts between dedicated pins, clock inputs, and programmable I/O.
Được đề xuất
Aerospace and defense control modules
The XC9572 family can support programmable sequencing, redundant command decoding, and status aggregation in aerospace or defense-related modules when the selected ordering option meets the required qualification and environmental criteria. The XC9572-10PQ100C is commercially graded, so it should not be assumed suitable for a flight application without a documented qualification and procurement decision. Its 72 macrocells, 72 I/O pins, and 10 ns propagation-delay class make it useful for bounded control tasks, while the commercial operating grade must be checked against the complete system requirements.
Được đề xuất
Medical equipment control
The XC9572-10PQ100C can implement non-safety-critical control functions in medical instruments, such as operating-panel decoding, sensor-channel sequencing, status lamps, and data-acquisition control. Its programmable architecture makes it useful for consolidating repetitive control logic and for adapting the product during development. The commercial temperature grade, electrical limits, reliability requirements, and regulatory design controls must be assessed before use in a medical system. Any patient-connected or safety-related function requires a separate risk assessment and an appropriately qualified design approach.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC9572-10PQ100C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC9572-10PQ100I | XC9572-10PQG100I | XC9572-7PQ100C |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | PQFP-100 | PQFP-100 | PQFP-100 | PQFP-100 |
| Device Type | CPLD | CPLD | CPLD | CPLD |
| Maximum Propagation Delay | 10 ns | 10 ns | 10 ns | 7 ns |
| Temperature Grade | Commercial | Industrial | Industrial | Commercial |
| In-System Programming | Yes | Yes | Yes | Yes |
Bảo phân biệt quan trọng
- Direct commercial-grade ordering option (vsXC9572-10PQ100I)
- Commercial-grade timing option in the same family (vsXC9572-7PQ100C)
- Direct PQFP-100 replacement strategy (vsXC9572XL-7VQ64I)
Ghi chú thiết kế
Do not treat the -10 marking as a 10 ns system-clock period. The 10 ns value is the stated maximum propagation-delay class for the selected logic path. Build the timing budget with external clock skew, setup time, hold time, interconnect delay, and output loading. The DS065 timing tables and implementation tool reports should be the authority for each clock domain.
Use the PQ100 package drawing from DS065 for land pattern, lead pitch, solder-mask clearance, and courtyard dimensions. The gull-wing package is intended for surface mounting, but lead coplanarity, paste volume, and reflow profile still require assembly validation. Preserve access to the device's programming interface and provide the required supply decoupling near the relevant power pins.
Confirm every supply rail and input voltage against the electrical-characteristics table in DS065 before connecting external signals. The device has a 2.5 V internal core and a listed maximum supply voltage of 5.25 V, but not every package pin or programming interface is referenced to the same rail. Include adequate local bypass capacitance and verify sequencing requirements if the board also supports in-system configuration.
Choose between commercial and industrial ordering options according to the actual ambient-temperature requirement rather than by suffix alone. XC9572-10PQ100I is the closest documented same-family choice when a broader industrial temperature range is needed. For any XC9572XL migration, note that AMD states there is no PQFP-100 version; the smaller TQFP package is not a board-level drop-in replacement.
Thông tin tuân thủ
The available product information identifies the commercial temperature grade and ESD protection exceeding 2,000 V but does not explicitly state the requested compliance statuses.