XC9572-15PCG84C - 72-Macrocell 15 ns CPLD | AMD | PLCC-84
MPN: XC9572-15PCG84C ✗ Cuối đờiXC9572-15PCG84C Tóm tắt
A CPLD, or Complex Programmable Logic Device, is a programmable-logic semiconductor positioned between simple fixed-function gates and larger FPGAs. Its internal architecture uses interconnected macrocells and a programmable interconnect to implement Boolean equations, state machines, interface logic, counters, and control functions. Within the broader programmable-logic hierarchy, the XC9572 sits as a compact CPLD: simpler to configure than an FPGA while providing flexible, nonvolatile in-system programmability for general-purpose logic consolidation.
The XC9572 contains four 36V18 function blocks and 72 macrocells, providing 1,600 usable gates for moderate-density control logic. Its 69 user I/O pins support connection to external memories, interfaces, counters, and control peripherals. The 15 ns speed grade makes it useful when the design requires faster switching than slower legacy CPLD grades. The part also supports in-system programming and test, allowing configuration or functional updates without removing the device from its assembled circuit.
The device is manufactured in advanced CMOS and operates from a nominal 5 V supply with a maximum supply voltage of 5.25 V. The commercial-temperature XC9572-15PCG84C is specified for 0 °C to 70 °C. Its 84-lead J-bend PLCC package has a stated size of 29.3116 mm by 29.3116 mm by 5.08 mm. The architecture is based on the XC9500 family’s FastFLASH technology and supports parallel programming of multiple XC9500 devices when system-level configuration requirements demand it.
Typical applications include industrial control and sequencing, legacy peripheral interfacing, data-acquisition logic, display-control functions, embedded bus arbitration, and board-level glue logic. The 69 available I/O lines make it especially useful when consolidating several asynchronous control functions into one programmable device. It can also serve as a companion logic device beside processors, microcontrollers, FPGAs, or memory devices when a small amount of deterministic support logic is required.
Designers should preserve the PLCC footprint when considering a replacement and verify pin assignments, voltage limits, and temperature grade before substitution. The package has 84 terminals, but the exact terminal names are not reproduced here; use the XC9572 In-system Programmable CPLD Data Sheet, DS065, when assigning PCB tracks and programming pins. Commercial availability should be confirmed through the Request a Quote form because this is a legacy programmable-logic device.
Bộ thay thế dễ dàng lắp đặt cho XC9572-15PCG84C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC9572-15PCG84C (cùng hình factor và footprint) — khác nhau ở Architecture, Package, Package Dimensions, Speed Grade, Temperature Grade.
XC9572-15PCG84I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC9572-15PCG84G
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC9572-15PC84C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC9572-12PCG84C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC9572-10PCG84C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC9572-15PCG84C Tỷ lệ tối đa & tính chất điện
| Product Type | In-system-programmable CPLD |
| Architecture | 4 × 36V18 function blocks |
| Macrocell Count | 72 macrocells |
| Usable Logic Gates | 1,600 gates |
| Speed Grade | 15 ns propagation delay |
| Tần số xung maksimum | 55.6 MHz |
| User I/O Count | 69 I/O |
| Maximum Supply Voltage | 5.25 V |
| Khoảng nhiệt độ hoạt động | 0 °C to 70 °C |
| Temperature Grade | Commercial |
| Hộp | 84-lead PLCC, J-bend terminals |
| Package Dimensions | 29.3116 mm × 29.3116 mm × 5.08 mm |
| Kiểu lắp đặt | Surface mount |
| Programming Type | In-system programmable |
| Program/Erase Endurance | Minimum 10,000 cycles |
| Technology | Advanced CMOS with FastFLASH technology |
| Trạng thái RoHS | RoHS compliant |
| Lead-Free Status | Lead-free |
Hướng dẫn cấu hình chân XC9572-15PCG84C 29.3116 mm × 29.3116 mm × 5.08 mm
Cấu hình chân cho XC9572-15PCG84C (29.3116 mm × 29.3116 mm × 5.08 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC9572-15PCG84C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC9572-15PCG84C phù hợp cho 6 Áp dụngs: Industrial Control and Sequencing, Legacy Peripheral Interface Consolidation, Data-Acquisition Control Logic, Display and Interface Control, Embedded Bus Arbitration, Legacy Board Maintenance and Retrofit.
Industrial Control and Sequencing
The XC9572-15PCG84C is suitable for consolidating industrial sequencing, interlocks, counters, and state-machine logic around a controller. Its four 36V18 function blocks provide 72 macrocells and 1,600 usable gates, while 69 I/O lines reduce the number of separate glue-logic devices. The 15 ns speed grade supports deterministic control paths, and the 5.25 V maximum supply suits established 5 V logic systems. For installations exceeding 70 °C, choose an industrial-grade XC9572 variant after confirming its full timing and environmental specifications.
Được đề xuất
Legacy Peripheral Interface Consolidation
The XC9572-15PCG84C can implement glue logic that adapts processors to older memory, handshake, status, and control peripherals. With 69 available I/O lines, a design can combine address decoding, read/write strobes, interrupt qualification, and data-routing registers without loading a larger FPGA. Its 15 ns grade gives designers a defined timing target, although external bus delay and skew must be included in the final timing analysis. The PLCC package also supports repair and legacy-board maintenance workflows.
Được đề xuất
Data-Acquisition Control Logic
In a data-acquisition system, the XC9572-15PCG84C can generate sample triggers, coordinate multiplexers, latch acquisition status, and mediate commands between a sensor interface and a host processor. Its 72 macrocells and 1,600 usable gates are sufficient for moderate control complexity without occupying a high-capacity programmable-logic device. The 69 I/O lines allow direct connection to multiplexers, converters, and control signals. Designers should constrain all acquisition paths according to device timing and account for board skew at the 55.6 MHz maximum clock.
Được đề xuất
Display and Interface Control
The XC9572-15PCG84C can implement display timing, character-row counters, keypad scanning, indicator control, and auxiliary bus decoding. Its 69 I/O lines provide ample connections for display strobes, data multiplexing, and touch or keypad inputs, while 72 macrocells allow multiple timing channels and status registers to be consolidated. The 15 ns speed grade is useful for synchronous display interfaces, but LCD response requirements are usually dominated by panel electronics rather than CPLD timing. Verify voltage compatibility between the 5 V device and attached interface components.
Được đề xuất
Embedded Bus Arbitration
The XC9572-15PCG84C is useful for implementing bus arbitration, address decoding, interrupt control, and peripheral chip-select logic around legacy processors. Its in-system programming capability permits configuration updates during board bring-up and production test, reducing the need to remove the device from its socket. The 84-lead PLCC package exposes enough I/O for multiple buses and control signals, while the 15 ns grade supports moderate-speed synchronous logic. Final timing closure must include address, qualifier, and acknowledgment paths under worst-case loading.
Được đề xuất
Legacy Board Maintenance and Retrofit
The XC9572-15PCG84C supports repair and modernization of legacy boards that originally used XC9500-family CPLDs. Its 84-terminal PLCC package and documented programming interface make it relevant when a failed logic device must be replaced on an existing socketed assembly. Before substitution, compare every pin function, power rails, timing grade, temperature grade, and configuration file against DS065. For systems exposed to temperatures above 70 °C, use the appropriate industrial suffix and verify its qualification rather than assuming the commercial grade is acceptable.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC9572-15PCG84C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC9572-15PCG84I | XC9572-15PCG84G | XC9572-15PC84C | XC9572-12PCG84C | XC9572-10PCG84C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 84-lead PLCC | 84-lead PLCC | 84-lead PLCC | 84-lead PLCC | 84-lead PLCC | 84-lead PLCC |
| Macrocell Count | 72 macrocells | 72 macrocells | 72 macrocells | 72 macrocells | 72 macrocells | 72 macrocells |
| Usable Logic Gates | 1,600 gates | 1,600 gates | 1,600 gates | 1,600 gates | 1,600 gates | 1,600 gates |
| User I/O Count | 69 I/O | 69 I/O | 69 I/O | 69 I/O | 69 I/O | 69 I/O |
| Speed Grade | 15 ns | 15 ns | 15 ns | 15 ns | 12 ns | 10 ns |
| Maximum Supply Voltage | 5.25 V | 5.25 V | 5.25 V | 5.25 V | 5.25 V | 5.25 V |
Bảo phân biệt quan trọng
- Commercial 15 ns grade in an 84-lead PLCC package (vsXC9572-15PCG84I)
- Lower propagation-delay grade available in the same footprint (vsXC9572-10PCG84C)
- Direct same-package option for legacy board maintenance (vsXC9572-15PC84C)
Ghi chú thiết kế
Use the DS065 PLCC-84 land pattern and terminal table when assigning tracks, power, ground, and programming signals. The package has 84 J-bend terminals and measures 29.3116 mm × 29.3116 mm × 5.08 mm. Check pin-1 orientation against the socket and PCB markings, and reserve access to the programming interface so the assembled board can be configured or tested without removing the CPLD.
Design the XC9500 power rails for a nominal 5 V environment and never exceed the documented 5.25 V maximum. Place the required bypass capacitors close to the supply and ground terminals using the recommended layout in DS065. Confirm that nearby processors, memories, and interface ICs use compatible logic levels, because the XC9572-15PCG84C is not a 3.3 V CPLD.
Do not treat a matching PLCC outline as proof of drop-in compatibility. For every replacement, compare the 84 terminal assignments, speed grade, maximum supply voltage, temperature grade, configuration-file support, and programming signals. The 12 ns and 10 ns variants can satisfy the same footprint electrically, but system timing and qualification still require review against the original design constraints.
Apply the device timing constraints to every clocked path and include PCB trace skew, loading, and external peripheral delay in system analysis. Although the listed maximum clock frequency is 55.6 MHz, the usable system rate depends on the selected architecture, I/O standard, and timing path. Use the DS065 AC timing tables and the vendor timing-report methodology rather than relying only on the nominal frequency.
Thông tin tuân thủ
The component listing identifies the XC9572-15PCG84C as RoHS compliant and lead-free. REACH, halogen-free, and conflict-minerals status are not stated in the available product information.