XCKU025-2FFVA1156I - Kintex UltraScale FPGA | AMD
MPN: XCKU025-2FFVA1156I ✓ Hoạt độngXCKU025-2FFVA1156I Tóm tắt
A field-programmable gate array is a programmable digital integrated circuit whose logic, signal routing, and embedded resources can be configured after manufacture. The Kintex UltraScale family combines programmable logic with high-speed serial transceivers, block RAM, DSP resources, and dedicated I/O resources. Within the system hierarchy, an FPGA is a semiconductor and programmable logic device, while this particular device belongs to the Kintex UltraScale product family and the AMD/Xilinx high-performance FPGA portfolio.
The principal benefits of XCKU025-2FFVA1156I are its 318,150 logic cells, 312 I/O, and large register count. These resources support parallel data pipelines, protocol bridging, real-time signal processing, hardware acceleration, and control logic requiring deterministic programmable behavior. The 1156-contact FCBGA also provides substantial interconnect capacity, although its fine pitch, high pin count, and large thermal requirements make careful PCB layout essential.
The 20 nm Kintex UltraScale architecture is designed for high-performance programmable systems operating from relatively high clock frequencies. Designers should use AMD Vivado Design Suite and the applicable UltraScale architecture documentation for device configuration, timing constraints, pin planning, and bitstream generation. Configuration storage, programming interfaces, clocking, power sequencing, and I/O standards must all be planned before schematic capture because mistakes in a 1156-BBGA design can be expensive to correct.
Typical applications include high-speed network equipment, industrial automation, semiconductor test systems, radar and signal-processing equipment, high-resolution imaging, and embedded control platforms. The 312 I/O support extensive board-level connectivity, while the programmable logic and DSP resources allow multiple functions to be consolidated into one device. Compared with a discrete processor-plus-support-chip design, an FPGA can provide parallel throughput, configurable interfaces, and low-latency hardware processing.
A critical layout consideration is the 1156-BBGA footprint. Follow the AMD package pinout files, preserve the recommended ball-grid escape geometry, route power and ground planes with low impedance, and provide thermal vias beneath the device. Validate power sequencing, configuration startup, decoupling, and the complete high-speed escape path with the finished stack-up before manufacturing.
This page combines the exact catalog identity, package information, temperature and speed-grade options, drop-in migration candidates, application guidance, and practical design notes needed to plan a Kintex UltraScale PCB around XCKU025-2FFVA1156I.
Bộ thay thế dễ dàng lắp đặt cho XCKU025-2FFVA1156I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XCKU025-2FFVA1156I (cùng hình factor và footprint) — khác nhau ở Device Type, Logic Cells, Package, Package Type, Speed Grade.
XCKU025-2FFVA1156C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XCKU025-2FFVA1156E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XCKU025-1FFVA1156I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XCKU025-1FFVA1156C
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XCKU025-1FFVA1156E
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XCKU025-2FFVA1156I Tỷ lệ tối đa & tính chất điện
| Device Type | Field Programmable Gate Array (FPGA) |
| Product Family | Kintex UltraScale |
| Manufacturer | AMD |
| Number of I/O | 312 I/O |
| Programmable Logic Cells | 318,150 cells |
| Register Count | 13,004,800 registers |
| Process Technology | 20 nm |
| Performance Grade | -2 |
| Temperature Grade | Industrial (I) |
| Hộp | 1156-BBGA FCBGA |
| Package Ball Count | 1156 balls |
| Kiểu lắp đặt | Surface Mount |
Hướng dẫn cấu hình chân XCKU025-2FFVA1156I 1156 balls
Cấu hình chân cho XCKU025-2FFVA1156I (1156 balls gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XCKU025-2FFVA1156I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XCKU025-2FFVA1156I phù hợp cho 6 Áp dụngs: Industrial Automation and Control, High-Speed Network Equipment, Digital Signal Processing, Semiconductor Test and Measurement, Machine Vision and Imaging, Embedded Processing and Hardware Acceleration.
Industrial Automation and Control
XCKU025-2FFVA1156I fits industrial automation systems that combine machine control, communications, data acquisition, and safety-adjacent monitoring in one programmable platform. Its 318,150 logic cells and 13,004,800 registers support parallel control logic, while 312 I/O provide extensive connectivity to sensors, actuators, encoders, and field buses. The -2 performance grade is useful for timing-sensitive control paths, and the I suffix supports industrial-temperature requirements. A board designer should preserve the 1156-BBGA footprint, implement deterministic power sequencing, and use AMD pinout files for every ball assignment. Timing closure, industrial temperature limits, and system-level safety requirements must be checked independently of the package compatibility.
Được đề xuất
High-Speed Network Equipment
The XCKU025-2FFVA1156I is appropriate for network equipment requiring parallel packet handling, traffic classification, buffering logic, and multiple board-level interfaces. Its 318,150 programmable logic cells and large register count allow multiple fixed-function blocks to be consolidated, reducing external component count compared with a processor-centric implementation. The 312 I/O can support control-plane logic and physical interfaces, while the -2 performance grade can benefit pipelines with demanding timing. Before selecting the device, verify the required transceiver count, line rates, clocking topology, and protocol-specific resources against the Kintex UltraScale device data. The 1156-BBGA package also requires careful layer-transition planning for high-speed interfaces.
Được đề xuất
Digital Signal Processing
XCKU025-2FFVA1156I can implement parallel digital signal-processing pipelines when a design needs configurable filters, transforms, correlation, or real-time data movement. The 318,150 logic cells and 13,004,800 registers provide substantial parallel state and routing resources, while 312 I/O facilitate acquisition and output interfaces. The -2 performance grade is advantageous for sample-rate or clock-frequency constrained paths when timing analysis confirms the margin. Engineers should inventory the exact DSP, block RAM, and transceiver resources for their selected configuration rather than assuming that every logical cell can replace dedicated DSP or memory. AMD UltraScale architecture documentation remains the authority for resource mapping, clocking, and implementation guidance.
Được đề xuất
Semiconductor Test and Measurement
XCKU025-2FFVA1156I suits automated test equipment requiring deterministic pattern generation, timing control, parallel acquisition, and protocol instrumentation. Its high logic-cell count permits multiple test channels or algorithm blocks to operate concurrently, and the 312 I/O provide connections to fixtures, instruments, and control logic. The -2 performance grade supports demanding timing paths, while the industrial temperature designation is relevant to equipment deployed outside controlled factory environments. Designers should isolate sensitive analog or low-voltage circuitry appropriately, verify acquisition-path timing, and prevent test-pattern noise from disturbing adjacent channels. Because this is a fine-pitch 1156-BBGA device, high-speed escape routing, solid plane distribution, and thermal-via placement are central implementation concerns.
Được đề xuất
Machine Vision and Imaging
XCKU025-2FFVA1156I is well suited to machine-vision and high-resolution imaging systems that perform parallel pixel processing, thresholding, feature extraction, or sensor-data reduction. The device's 318,150 logic cells and 13,004,800 registers allow wide datapaths and frame buffers to be organized in programmable hardware, delivering deterministic latency without periodic processor overhead. Its 312 I/O can accommodate camera interfaces, synchronization signals, and control peripherals, subject to the device's dedicated I/O capabilities. The -2 grade can improve timing margin for image-processing pipelines, while the I designation supports industrial camera systems. Engineers must confirm available memory, DSP, transceiver, and clock resources for the selected UltraScale device and validate high-speed camera interface timing with the final PCB stack-up.
Được đề xuất
Embedded Processing and Hardware Acceleration
XCKU025-2FFVA1156I can act as a hardware accelerator or co-processor beside a host processor, offloading repetitive parallel tasks into dedicated pipelines. Its 318,150 logic cells and 13,004,800 registers provide a large pool of configurable datapaths, while 312 I/O supports host communication, memory interfaces, status reporting, and control signaling. The -2 performance grade supports higher clock targets than the -1 migration option, although final timing depends on placement, routing, and the selected interfaces. For a successful implementation, define the accelerator interface and memory protocol early, reserve pins through the AMD planning flow, and include reset, initialization, and exception handling in the architecture. The 1156-BBGA land pattern must be reused exactly when transitioning among compatible XCKU025 variants.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XCKU025-2FFVA1156I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XCKU025-2FFVA1156C | XCKU025-2FFVA1156E | XCKU025-1FFVA1156I | XCKU025-1FFVA1156C | XCKU025-1FFVA1156E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 1156-BBGA FCBGA | 1156-BBGA FCBGA | 1156-BBGA FCBGA | 1156-BBGA FCBGA | 1156-BBGA FCBGA | 1156-BBGA FCBGA |
| Product Family | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale |
| Number of I/O | 312 I/O | 312 I/O | 312 I/O | 312 I/O | 312 I/O | 312 I/O |
| Programmable Logic Cells | 318,150 cells | 318,150 cells | 318,150 cells | 318,150 cells | 318,150 cells | 318,150 cells |
| Register Count | 13,004,800 registers | 13,004,800 registers | 13,004,800 registers | 13,004,800 registers | 13,004,800 registers | 13,004,800 registers |
| Process Technology | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm |
| Performance Grade | -2 | -2 | -2 | -1 | -1 | -1 |
| Temperature Grade Suffix | I | C | E | I | C | E |
Bảo phân biệt quan trọng
- Higher performance-grade option (vsXCKU025-1FFVA1156I)
- Industrial temperature configuration (vsXCKU025-2FFVA1156C)
- Extended-temperature configuration with unchanged performance grade (vsXCKU025-2FFVA1156E)
Ghi chú thiết kế
Use the AMD XCKU025-2FFVA1156I package pinout files to create the 1156-BBGA land pattern and escape routing. The BGA has 1156 balls, so signal escapes require a deliberate via strategy and adequate PCB layer count. Treat power, ground, and high-speed interfaces as separate routing constraints: preserve continuous reference planes, minimize return-path discontinuities, and verify the escape geometry with the actual board stack-up before releasing fabrication files.
Plan thermal relief and copper spreading around the 1156-BBGA package before component placement. Use the recommended thermal-via arrangement beneath the FPGA, maintain uninterrupted ground planes, and confirm the junction-temperature limit against the actual ambient temperature and board construction. Because the exact package thermal parameters are device-specific, obtain them from the AMD package documentation rather than estimating from a generic BGA thermal resistance.
Design the supply rails and startup sequence around the device's specific power pins and the AMD UltraScale power guidelines. Place local decoupling at the package connections with very short return paths, keep supply distribution impedance low, and verify configuration behavior during power ramps. Do not infer pin functions from the ordering code; assign every power, ground, configuration, and user pin directly from the package-description files.
A compatible BGA land pattern does not make every XCKU025 ordering code functionally interchangeable. The -1 and -2 portions select different performance grades, while C, E, and I select different temperature options. Changing an -2 I-grade device to an -1 E-grade part can alter both timing margin and environmental suitability. Re-run timing, power, thermal, and operating-temperature checks for every approved substitution.
Thông tin tuân thủ
The available catalog information does not state product-specific environmental or material compliance. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status from the AMD compliance documentation for the exact ordering code.