XCKU11P-2FFVA1156I - 653K Kintex UltraScale+ FPGA
MPN: XCKU11P-2FFVA1156I ✓ Hoạt độngXCKU11P-2FFVA1156I Tóm tắt
An FPGA is a programmable semiconductor whose configurable logic blocks, digital signal processing resources, block RAM, high-speed serial transceivers, and I/O can be interconnected by a design file. The Kintex UltraScale+ family sits between lower-density programmable logic and larger UltraScale devices, balancing substantial parallel processing capacity, integrated memory, and high-speed connectivity for demanding embedded systems.
The XCKU11P-2FFVA1156I provides 653,100 logic cells and 464 I/O sites in a single package. Its -2 speed grade targets performance-oriented industrial and commercial systems, while the trailing I designation identifies the industrial-temperature option. The listing specifies a 35 x 35 mm package with 512 inputs and a 0.876 V operating voltage, supporting dense PCB integration without external programmable-logic devices.
This device is particularly useful when a system requires parallel data processing, high throughput interfaces, or configurable hardware rather than a fixed application-specific processor. Its extensive logic resources can accelerate functions such as packet handling, image preprocessing, control logic, and protocol bridging. Dedicated FPGA resources should be assigned according to the device utilization and timing reports generated for the selected Vivado design.
Typical applications include industrial machine vision, test and measurement systems, high-speed network interfaces, embedded signal processing, and communications equipment. In these systems, the FPGA can consolidate multiple fixed-function components into one programmable device while allowing field updates when the bitstream or application logic changes.
PCB design must account for the FCBGA-1156 footprint, dense ball assignment, multilayer escape routing, power delivery, and thermal management. Use the AMD UltraScale package pinout files to assign every ball and the device data sheet for voltage, decoupling, configuration, and operating limits. Verify the exact pinout and board requirements before fabrication.
This page combines the device specifications, package details, same-family replacement options, comparison parameters, and practical design guidance needed to evaluate the XCKU11P-2FFVA1156I as a drop-in candidate for an existing Kintex UltraScale+ design.
Bộ thay thế dễ dàng lắp đặt cho XCKU11P-2FFVA1156I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XCKU11P-2FFVA1156I (cùng hình factor và footprint) — khác nhau ở Package, Speed Grade, Mounting Type, Device Type, Logic Cells.
XCKU11P-2FFVA1156C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XCKU11P-2FFVA1156E
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XCKU11P-1FFVA1156I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XCKU11P-1FFVA1156E
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XCKU11P-3FFVA1156E
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XCKU11P-2FFVA1156I Tỷ lệ tối đa & tính chất điện
| Device Type | Kintex UltraScale+ field-programmable gate array |
| Logic Cells | 653,100 cells |
| Flip-Flops | 53,964,800 flip-flops |
| I/O Count | 464 I/O |
| Input Count | 512 inputs |
| Operating Voltage | 0.876 V |
| Speed Grade | -2 |
| Temperature Grade | Industrial, -40 °C to +100 °C |
| Hộp | FCBGA-1156, 35 x 35 mm |
| Package Pin Count | 1,156 balls |
| Package Height | 3.51 mm |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân XCKU11P-2FFVA1156I 3.51 mm
Cấu hình chân cho XCKU11P-2FFVA1156I (3.51 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XCKU11P-2FFVA1156I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XCKU11P-2FFVA1156I phù hợp cho 6 Áp dụngs: Industrial Machine Vision, High-Speed Data Acquisition, Test and Measurement Equipment, Communications Infrastructure, Embedded Signal Processing, Aerospace Ground Support Equipment.
Industrial Machine Vision
The XCKU11P-2FFVA1156I suits machine-vision systems that combine image acquisition, preprocessing, feature detection, and control logic in one programmable device. Its 653,100 logic cells provide substantial parallel capacity for pixel pipelines, while 464 I/O sites support camera, sensor, and communication interfaces. The -2 speed grade is useful when image-processing paths have demanding clock targets, and the -40 °C to +100 °C operating range supports industrial equipment. Engineers should use the AMD pinout archive to assign power, configuration, and I/O balls and verify timing and power constraints in Vivado before PCB release.
Được đề xuất
High-Speed Data Acquisition
For high-speed acquisition systems, the XCKU11P-2FFVA1156I can consolidate parallel sampling logic, buffering, digital filtering, and data transfer within a single Kintex UltraScale+ device. The 53,964,800 flip-flops and 653,100 logic cells provide substantial capacity for wide parallel datapaths, while the 464 I/O sites can connect multiple converters or sensor banks. The target's -2 speed grade provides additional timing margin over a -1 option, but the design still requires careful source-synchronous routing and complete timing closure. Pin assignments and power planning should follow the AMD FCBGA-1156 package documentation.
Được đề xuất
Test and Measurement Equipment
The XCKU11P-2FFVA1156I is appropriate for modular test equipment requiring configurable sequencing, protocol conversion, pattern generation, and real-time analysis. Its large logic population allows multiple measurement channels and control functions to be integrated without relying on a fixed sequence of standard components. The -2 grade helps preserve margin for demanding timing paths, while the industrial temperature range supports controlled laboratory and factory environments. Designers should partition the logic by clock domain, constrain I/O timing, and review implemented resource utilization and power estimates before programming production hardware.
Được đề xuất
Communications Infrastructure
The XCKU11P-2FFVA1156I can support communications equipment that combines packet processing, timing, control, and interface adaptation in a single Kintex UltraScale+ platform. Its 653,100 logic cells can host parallel protocols and buffering logic, while the high-density FCBGA-1156 package supports advanced boards with multiple I/O and power connections. The -2 speed grade provides useful timing margin for demanding paths, although transceiver configuration and line-rate constraints require separate validation. Use AMD's device and package documentation to implement board power sequencing, configuration access, and high-speed signal routing.
Được đề xuất
Embedded Signal Processing
The XCKU11P-2FFVA1156I is well suited to fixed-point signal-processing pipelines that benefit from parallel FPGA implementation, such as filtering, correlation, modulation, or waveform analysis. Its large logic-cell count allows multiple arithmetic pipelines to operate concurrently, and the -2 speed grade can improve timing margin for clocked processing blocks. Designers should map operations to the available DSP and block-RAM resources identified in the AMD device data sheet, then verify throughput with Vivado timing reports. The FCBGA-1156 footprint requires multilayer routing and disciplined thermal and power distribution.
Được đề xuất
Aerospace Ground Support Equipment
Although the XCKU11P-2FFVA1156I is an industrial-temperature FPGA, it can be evaluated for aerospace ground-support and simulation systems where environmental, reliability, and procurement requirements are controlled. Its 653,100 logic cells support redundant test routines, telemetry handling, and real-time simulation, while 464 I/O sites support dense interface boards. The design must not be treated as an automatically qualified flight component; qualification depends on the exact device, package, application, and program requirements. Engineers should verify temperature margins, power integrity, radiation considerations, and timing under actual operating conditions.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XCKU11P-2FFVA1156I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XCKU11P-2FFVA1156C | XCKU11P-2FFVA1156E | XCKU11P-1FFVA1156I | XCKU11P-1FFVA1156E | XCKU11P-3FFVA1156E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FCBGA-1156 (35 x 35 mm) | FCBGA-1156 (35 x 35 mm) | FCBGA-1156 (35 x 35 mm) | FCBGA-1156 (35 x 35 mm) | FCBGA-1156 (35 x 35 mm) | FCBGA-1156 (35 x 35 mm) |
| Speed Grade | -2 | -2 | -2 | -1 | -1 | -3 |
| Temperature Suffix | I, industrial | C, commercial | E | I, industrial | E | E |
| Logic Cells | 653,100 cells | 653,100 cells | 653,100 cells | 653,100 cells | 653,100 cells | 653,100 cells |
| Flip-Flops | 53,964,800 flip-flops | 53,964,800 flip-flops | 53,964,800 flip-flops | 53,964,800 flip-flops | 53,964,800 flip-flops | 53,964,800 flip-flops |
| I/O Count | 464 I/O | 464 I/O | 464 I/O | 464 I/O | 464 I/O | 464 I/O |
| Input Count | 512 inputs | 512 inputs | 512 inputs | 512 inputs | 512 inputs | 512 inputs |
| Operating Voltage | 0.876 V | 0.876 V | 0.876 V | 0.876 V | 0.876 V | 0.876 V |
Bảo phân biệt quan trọng
- High logic density in a single Kintex UltraScale+ device (vsXCKU11P-2FFVA1156C)
- Industrial-temperature operation (vsXCKU11P-2FFVA1156C)
- -2 performance grade with an established FCBGA-1156 footprint (vsXCKU11P-1FFVA1156I)
- Pin-compatible sourcing within the same XCKU11P family (vsXCKU11P-2FFVD900I)
Ghi chú thiết kế
Implement the FCBGA-1156 footprint from the AMD mechanical package drawing and package pinout archive rather than scaling a generic BGA land pattern. The package has 1,156 balls in a 35 x 35 mm outline, making escape routing, layer transitions, and solder-mask definition especially sensitive. Use a multilayer stack-up with short connections from power and ground balls to planes, and verify the complete pad geometry with the PCB foundry's assembly capability.
Plan the complete multi-rail power architecture before routing signal interfaces. The device operates at 0.876 V, and high-performance FPGA designs can demand substantial transient current from the core and auxiliary supplies. Use the manufacturer power guide to assign decoupling capacitance and regulator types, provide adequate plane connectivity, and check voltage drop and IR loss at the supply pins. Run Vivado power analysis against realistic switching activity before releasing the board.
Preserve timing margin by separating high-speed clock, transceiver, and memory interfaces from noisy or lower-speed routing. Use the implemented design's placement guidance for key clocking and interface resources, avoid routing over split power planes, and keep configuration and programming signals away from potential aggressors. For a -2 design, retain extra margin where possible because substituting a -1 grade can alter both internal and I/O timing paths.
Estimate junction temperature from actual board temperature, package construction, airflow, and the power report generated for the final workload. A 35 x 35 mm FCBGA can distribute heat over a substantial area, but a multilayer board with limited copper and ventilation may still require a heat spreader or forced airflow. Validate the thermal solution at the highest expected ambient temperature and under sustained maximum activity, not only under a light laboratory test.
Do not treat a same-family MPN as automatically interchangeable. A speed-grade change can break timing closure, while an industrial-temperature suffix can be required by the end environment. XCKU11P-2FFVD900I uses a different FFVD900 package and cannot replace the FFVA1156 target without a board redesign. Always compare the complete ordering code, package ballout, temperature grade, speed grade, power rails, and configuration requirements before substitution.
Thông tin tuân thủ
The device is an industrial-temperature FPGA, not an automotive-qualified AEC-Q100 product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated with definitive values and therefore remain unknown.