XMC4104Q48K128AB - 80MHz Cortex-M4 128KB Flash MCU | Infineon
MPN: XMC4104Q48K128AB ✗ Cuối đờiBộ thay thế dễ dàng lắp đặt cho XMC4104Q48K128AB — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XMC4104Q48K128AB (cùng hình factor và footprint) — khác nhau ở Package, Architecture, Flash Memory, Product Type, Supply Voltage.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếXMC4104Q48K128AB Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 128 KB |
| Flash Organization | 128K x 8 bits |
| Nhiệt độ hoạt động | -40 °C to +125 °C |
| Hộp | PG-VQFN-48-53 |
| Package Dimensions | 7 x 7 mm |
| Kiểu lắp đặt | Surface mount |
| Architecture | ARM Cortex-M4, 32-bit |
| Family | XMC4000 |
| Series | XMC4104 |
| Application Optimization | Industrial applications |
Hướng dẫn cấu hình chân XMC4104Q48K128AB 7 x 7 mm
Cấu hình chân cho XMC4104Q48K128AB (7 x 7 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XMC4104Q48K128AB.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XMC4104Q48K128AB phù hợp cho 6 Áp dụngs: Industrial embedded control, Motor and motion control, Sensor and condition-monitoring systems, Communication equipment, Automation and data acquisition, Human-machine interface and control panel.
Industrial embedded control
XMC4104Q48K128AB fits industrial embedded-control designs requiring a 32-bit ARM Cortex-M4 core and up to 80 MHz processing speed. Its verified 128 KB flash capacity provides room for application code, configuration data, and control routines, while the -40 °C to +125 °C range supports equipment operating across industrial temperature conditions. The device should be placed in the system beside the required sensors, actuators, and power regulation, with firmware selected only after confirming the complete peripheral and electrical specifications.
Được đề xuất
Motor and motion control
The XMC4104Q48K128AB can be evaluated for motor-control and motion-control subsystems that benefit from an 80 MHz Cortex-M4 core and deterministic digital control loops. Its 128 KB flash memory is suitable for storing control algorithms, state machines, calibration values, and diagnostic routines. The verified data does not list motor-control peripherals, timer characteristics, PWM resolution, or analog interfaces, so those functions must be confirmed in the manufacturer documentation before selecting the MCU for a specific motor drive.
Được đề xuất
Sensor and condition-monitoring systems
For sensor nodes and industrial condition-monitoring equipment, XMC4104Q48K128AB offers a compact 80 MHz control platform with 128 KB of program memory for acquisition sequencing, filtering, local calculations, and event logging. The -40 °C to +125 °C rating is relevant when the controller is installed near machinery or outdoor equipment. Because the supplied web data does not identify ADC resolution, communication peripherals, or low-power modes, the design should first verify the required sensor interface and system power budget.
Được đề xuất
Communication equipment
XMC4104Q48K128AB may suit communication-related embedded modules that require a higher-performance Cortex-M4 execution core than basic 8-bit or low-clock controllers. Its 128 KB flash capacity can hold protocol stacks, device drivers, configuration tables, and monitoring logic, provided the available RAM and peripheral set are sufficient. The verified results do not specify CAN, Ethernet, USB, UART, or other communication interfaces, so communication suitability cannot be confirmed without the full manufacturer datasheet.
Được đề xuất
Automation and data acquisition
The 80 MHz ARM Cortex-M4 core and 128 KB flash memory make XMC4104Q48K128AB a candidate for automation controllers, test equipment, and compact data-acquisition systems. The controller can organize sampling, control sequencing, diagnostics, and local storage when the required analog and digital peripherals are available. The verified data does not identify ADC, DAC, comparator, timer, or communication resources, so engineers should compare those interfaces against the acquisition requirements rather than relying on the MPN family designation.
Được đề xuất
Human-machine interface and control panel
XMC4104Q48K128AB can be considered for a compact control-panel or human-machine-interface controller when the application needs more processing capability than a small low-end MCU and can fit within a 48-lead VQFN footprint. The Cortex-M4 core at 80 MHz can manage user-interface state, keypad or display logic, diagnostics, and communication handling. The verified data does not specify graphics, display, touch, USB, or memory interfaces, so the design must confirm that the required human-machine-interface peripherals are present.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XMC4104Q48K128AB — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Core | ARM Cortex-M4, 32-bit |
| Maximum Frequency | 80 MHz |
| Flash Memory | 128 KB (128K x 8 bits) |
| Operating Temperature | -40 °C to +125 °C |
| Package | PG-VQFN-48-53, 7 x 7 mm |
| Brand | Infineon |
| Application Class | Industrial embedded-control applications |
| Lifecycle Status | unknown |
Bảo phân biệt quan trọng
- High-frequency Cortex-M4 processing (vsLower-frequency general-purpose MCU designs)
- Industrial-oriented family positioning (vsGeneric commercial microcontroller families)
- Compact 48-lead VQFN integration (vsLarger-package MCUs with different footprints)
Ghi chú thiết kế
The supplied data does not state the XMC4104Q48K128AB operating-voltage range, current consumption, or power-domain requirements. Before schematic capture, obtain the manufacturer datasheet and define the supply rails, decoupling, reset, clock, and debug connections against the exact package pinout. Do not infer voltage compatibility from the processor frequency or industrial temperature rating.
Use the manufacturer PG-VQFN-48-53 land pattern and pin assignment rather than a generic 48-pin QFN footprint. Confirm exposed-pad connection, thermal-via requirements, pin-1 orientation, and solder-mask clearance from the official package drawing. A footprint mismatch can prevent drop-in assembly even when the nominal package family appears similar.
Do not treat XMC4104Q48K128AB, XMC4104Q48K128ABXUMA1, and XMC4104-Q48K128 AB as automatically interchangeable merely because the listings contain similar text. The verified data does not define suffix, packing, grade, or lifecycle equivalence. Confirm the manufacturer ordering code, package, temperature grade, flash configuration, and supply status before substitution or procurement.
Reserve space for programming, debug, reset, and clock-support circuitry according to the verified manufacturer documentation. Because the supplied data omits the pin table and peripheral list, finalize high-speed or communication routing only after those interfaces are confirmed. Validate the PCB with the exact manufacturer footprint and an assembled sample before release to production.
Thông tin tuân thủ
The supplied verified web results do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.
