Z86C9320PSC - 8-Bit 20MHz ROMless MCU | Zilog | DIP-40
MPN: Z86C9320PSC ✗ Cuối đờiZ86C9320PSC Tóm tắt
An 8-bit ROMless microcontroller is a programmable embedded controller whose architecture, registers, timers, ports, and arithmetic peripherals are optimized for compact control systems. Within the product hierarchy, the Z86C9320PSC is a microprocessor IC and an embedded microcontroller. Unlike a device containing fixed program memory, its ROMless architecture separates the control core from application code, allowing the same controller family to address different firmware sizes and peripheral combinations.
The Z86C9320PSC operates at up to 20MHz and provides a 16-bit-by-16-bit multiplier and a 32-bit-by-16-bit divider. These dedicated arithmetic functions reduce the execution burden of multiply and divide operations in motor-control, measurement, timing, and industrial automation logic. The C93 series also includes three 16-bit counter timers, a capture register, and a fast decrement mode, providing useful building blocks for event counting, frequency measurement, periodic timing, and pulse-width-related applications.
The ROMless Z8 architecture allows the MCU to operate with external program memory while its internal peripherals handle real-time control tasks. Its 8-bit data path is appropriate for compact products where the computational load is dominated by control, sequencing, and arithmetic rather than high-bandwidth data processing. The 40-pin DIP format also supports straightforward prototyping, socket-based assembly, and systems that favor a through-hole mechanical interface over a fine-pitch surface-mount package.
Typical uses for this controller include industrial sequence controllers, motor and stepper-control logic, instrumentation, measurement systems, timer subsystems, and embedded products that need dedicated multiplication or division. A ROMless implementation is particularly useful when the final firmware size is uncertain, multiple firmware variants share a common controller platform, or product revisions require code changes without changing the MCU.
The main design consideration is that the external program-memory interface and associated bus layout require careful planning on the PCB. Decoupling, clock stability, address decoding, and signal routing around the 40-pin DIP should follow the manufacturer’s recommended application circuit. Because the part is a legacy through-hole controller, availability, lifecycle status, and firmware-tool support should be confirmed before committing to a new production design.
This page consolidates the Z86C9320PSC device identity, package information, lifecycle indication, arithmetic capabilities, and carefully qualified replacement information. It also distinguishes true same-footprint drop-in choices from related MCU options, helping engineers assess controller continuity without confusing functional similarity with PCB-level compatibility.
Bộ thay thế dễ dàng lắp đặt cho Z86C9320PSC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với Z86C9320PSC (cùng hình factor và footprint) — khác nhau ở Program Memory, Series, Terminal Count.
Z86C9320PSG
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →Z86C9320PSC Tỷ lệ tối đa & tính chất điện
| Product Type | 8-bit ROMless microcontroller |
| Series | Z8 Z8 C93 |
| Tần số xung maksimum | 20 MHz |
| Bề rộng đường dữ liệu | 8 bit |
| Program Memory | ROMless; external program memory required |
| Multiplier | 16-bit x 16-bit |
| Divider | 32-bit x 16-bit |
| Counter Timers | 3 x 16-bit |
| Capture Register | 1 |
| Timer Mode | Fast decrement |
| Hộp | 40-pin DIP |
| Kiểu lắp đặt | Through-hole |
| Terminal Count | 40 |
| Temperature Grade | Commercial |
| Process Technology | CMOS |
Hướng dẫn cấu hình chân Z86C9320PSC 40-pin dip
Cấu hình chân cho Z86C9320PSC (40-pin dip gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho Z86C9320PSC.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
Z86C9320PSC phù hợp cho 3 Áp dụngs: Hệ thống tích hợp, Máy thiết bị IoT, Điều khiển công nghiệp.
Hệ thống tích hợp
Xử lý trung tâm trong các ứng dụng tích hợp sử dụng Z86C9320PSC.
Máy thiết bị IoT
Máy thiết bị kết nối thông minh được cung cấp bởi Z86C9320PSC.
Điều khiển công nghiệp
Hệ thống tự động hóa và điều khiển sử dụng Z86C9320PSC.
Dữ liệu tham khảo kỹ thuật cho Z86C9320PSC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | Z86C9320PSG |
|---|---|---|
| Package | 40-pin DIP | 40-pin DIP |
| Brand | Zilog, Inc. | Zilog, Inc. |
| Processor Architecture | 8-bit Z8 C93 | 8-bit Z8 C93 |
| Maximum Clock Frequency | 20 MHz | 20 MHz |
| Program Memory | ROMless | ROMless |
| Multiplier | 16-bit x 16-bit | 16-bit x 16-bit |
| Divider | 32-bit x 16-bit | 32-bit x 16-bit |
| Counter Timers | 3 x 16-bit | 3 x 16-bit |
| Mounting Style | Through-hole | Through-hole |
Bảo phân biệt quan trọng
- Maintains the original through-hole controller platform (vsZ86C9320PSG)
- Dedicated arithmetic hardware supports compact control logic (vsGeneral-purpose ROMless 8-bit MCUs)
- External program memory enables flexible firmware capacity (vsFixed-program-memory 8-bit MCUs)
Ghi chú thiết kế
Treat the 40-pin DIP footprint as a through-hole legacy layout and preserve adequate spacing around the device for socketed or soldered installation. Check every signal against the manufacturer connection diagram, especially clock, reset, programming, and external-memory bus nets. Do not reuse a surface-mount Z86C9320 land pattern because its mechanical geometry and pin arrangement differ from the DIP package.
Use the manufacturer’s recommended power and decoupling network near the controller supply pins and external program-memory device. A ROMless design requires the MCU and external memory to share a stable supply and correctly sequenced control signals. Check bus rise and fall times against the external memory’s electrical characteristics rather than assuming that a 20MHz clock is suitable for every memory device.
Do not assume that identical package dimensions guarantee firmware-compatible substitution. The Z86C9320PSC and Z86C9320PSG share the 40-pin DIP format, but engineers should compare clock, reset, peripheral-enable, supply, and programming details before release. Because the target is an obsolete legacy controller, preserve an archival copy of the firmware, object code, and validated hardware design.
Thông tin tuân thủ
The part is identified as a commercial-grade legacy microcontroller. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the cited product information, so those attributes remain unknown.