Zilog

Z86C9320VSC - 8-Bit 20MHz ROMless MCU | Zilog

MPN: Z86C9320VSC ✓ Hoạt động
PLCC Package 20 MHz Speed External memory; no internal ROM Memory
MOQ: 1 |

Z86C9320VSC Tóm tắt

The Zilog Z86C9320VSC is an 8-bit Z8 ROMless microcontroller operating at 20 MHz and packaged in a 44-pin PLCC. Its ROMless architecture requires an external program-memory source, making it suitable for systems that need flexible firmware storage, field programming, or program separation from the controller. The device belongs to the Z86C93 microcontroller family and targets embedded control, communications, and industrial applications requiring deterministic 8-bit processing.

A microcontroller is a complete embedded-control component that integrates a processor core, memory interfaces, timers, serial peripherals, and I/O resources onto one semiconductor device. The Z86C9320VSC sits in the hierarchy of embedded controller, microcontroller, 8-bit MCU, and Z8 ROMless controller. Unlike a ROM-based MCU with fixed internal program memory, this architecture delegates program storage to external memory, allowing the same controller family to serve products with different firmware and memory-capacity requirements.

The principal documented characteristics include an 8-bit CPU, a 20 MHz operating frequency, ROMless configuration, and a 44-pin PLCC package. Its 20 MHz clock capability provides substantially more instruction throughput than lower-speed 8-bit controllers, making it useful for interrupt-driven control, serial protocols, keypad or display interfaces, and communication front ends. The external-memory architecture is especially valuable when firmware size, updateability, or protection requirements exceed practical internal-ROM limits.

The Z86C9320VSC belongs to Zilog's Z86C93 family and is identified in the product listings as the C93 device. Its architecture supports the role of a dedicated embedded controller rather than a general-purpose host processor. Board-level implementation therefore requires careful routing of the external memory interface and correct decoupling of the supply rails. Firmware development also depends on a toolchain and programmer compatible with the Z8 family, so software-tool availability should be confirmed before committing to a new design.

Typical uses include industrial control panels, data-acquisition modules, serial protocol bridges, programmable logic controllers, and embedded communications equipment. The device is particularly appropriate where an 8-bit architecture simplifies code and peripheral handling while external program memory permits application-specific code storage. It can also be used in legacy Z8 control systems where retaining the established 44-pin PLCC footprint simplifies maintenance and board reuse.

For new layouts, place the controller and supporting external-memory devices according to the manufacturer's pin and layout guidance, and keep high-current and switching circuitry away from sensitive signal paths. Confirm the exact programming algorithm, clock configuration, reset requirements, and external-memory interface in the manufacturer datasheet before schematic release. Production designs should also verify temperature grade, package marking, sourcing status, and programming-tool support with the manufacturer.

This page consolidates the core Z86C9320VSC identity, package and frequency details, replacement considerations, and practical design guidance. It also distinguishes confirmed device attributes from electrical details that require direct review of the manufacturer datasheet, helping engineers make a technically sound sourcing and design decision.

Bộ thay thế dễ dàng lắp đặt cho Z86C9320VSC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với Z86C9320VSC (cùng hình factor và footprint) — khác nhau ở Package Type, Maximum Clock Frequency, Program Memory, Operating Supply Voltage, Package Body Size.

Zilog
Program Memory: ROMless; external program memory required
Package Body Size: 10 mm x 10 mm
So sánh với Z86C9320VSC →
Zilog
Package Type: 44-pin PLCC
Program Memory: ROMless; external program memory required
So sánh với Z86C9320VSC →
Zilog
Package Type: 48-pin LQFP
Maximum Clock Frequency: 25 MHz
Program Memory: External ROMless program memory
So sánh với Z86C9320VSC →
Zilog
Package Type: 44-pin PLCC
Operating Supply Voltage: 2.97 V to 5.5 V
So sánh với Z86C9320VSC →
IXYS
Package Type: 44-lead LCC (J-Lead)
Maximum Clock Frequency: 33 MHz
Operating Supply Voltage: 4.5 V to 5.5 V
So sánh với Z86C9320VSC →

Z86C9320VSG

✅ Drop-In
Zilog
📦 PLCC-44
8-bit ROMless microcontroller · Z86C93 C93 series · Z8 Z8 · 20 MHz · 8 bit · ROMless; external program memory required · 236 bytes · Multiply/divide

Liên hệ để biết giá

Xem tài liệu →

Z86C9320ASG

✅ Drop-In
Zilog
📦 PLCC-44
8-bit ROMless microcontroller · Z8 8-bit architecture · Z86C93 family · 20 MHz · ROMless; external program memory required · Hardwired 16-bit x 16-bit multiplier · Hardwired 32-bit/16-bit divider · 3 x 16-bit counter timers

Liên hệ để biết giá

Xem tài liệu →

Z86C9325VSG

✅ Drop-In
Zilog
📦 PLCC-44
8-bit ROMless Microcontroller · Zilog · Z8 · 8 bit · 25 MHz · 2.97 V to 5.5 V · 24 · ROMless

Liên hệ để biết giá

Xem tài liệu →

Z86C9325ASG

✅ Drop-In
Zilog
📦 PLCC-44
8-bit ROMless Z8 microcontroller · 25 MHz · 3 V to 5.5 V · Z8 8-bit · CMOS · External ROMless program memory · Hardwired 16-bit x 16-bit multiplier · Hardwired 32-bit/16-bit divider

Liên hệ để biết giá

Xem tài liệu →

Z86C9333VSG

✅ Drop-In
IXYS
📦 PLCC-44
8-bit · 33 MHz · ROMless · 4.5 V to 5.5 V · Z8 series · 44-lead LCC (J-Lead) · 16.6 mm x 16.6 mm · Surface Mount

Liên hệ để biết giá

Xem tài liệu →

Z86C9320VSC Tỷ lệ tối đa & tính chất điện

Device Type 8-bit ROMless Microcontroller
Architecture Z8
Series Z86C93
Device Designation C93
CPU Bit Width 8 bit
Tần số xung maksimum 20 MHz
Program Memory External memory; no internal ROM
Package Type PLCC
Số chân 44 pins
Kiểu lắp đặt Surface Mount

Hướng dẫn cấu hình chân Z86C9320VSC plcc

Cấu hình chân cho Z86C9320VSC (plcc gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân plcc cho Z86C9320VSC

Không có dữ liệu chân cụ thể sẵn có cho Z86C9320VSC.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

Z86C9320VSC phù hợp cho 6 Áp dụngs: Industrial Control Panels, Serial Communication Bridges, Data Acquisition Modules, Programmable Logic Controllers, Appliance and HVAC Controllers, Embedded Communication Equipment.

🏭

Industrial Control Panels

The Z86C9320VSC fits an industrial control-panel controller because its 8-bit Z8 processor operates at 20 MHz while using an external program-memory interface for flexible firmware capacity. A designer can place it beside sensors, switch inputs, indicator drivers, and a serial transceiver while retaining a familiar 44-pin PLCC implementation. The 20 MHz clock provides useful throughput for debouncing, state-machine execution, and interrupt handling without the complexity of a higher-bit processor. The ROMless arrangement also allows product variants to share controller hardware while using different external program memories. Before layout release, confirm pin multiplexing, clock timing, reset behavior, and environmental limits in the manufacturer datasheet.

🌐

Serial Communication Bridges

The Z86C9320VSC is appropriate for a protocol-conversion or serial-bridge module where predictable 8-bit processing, external program storage, and a 20 MHz operating rate are the principal requirements. Its CPU can service character reception, buffer management, timeout detection, and data forwarding while the external memory holds the protocol stack and configuration tables. The 44-pin PLCC package also supports reuse of established control hardware. Because no internal ROM is provided, the implementation must include suitable program memory and any required chip-select or address-decoding circuitry. Confirm the exact serial peripheral resources, interrupt structure, and memory-interface timing before selecting external components.

🖥️

Data Acquisition Modules

The Z86C9320VSC can serve as the control element in a compact data-acquisition module that gathers digital inputs, processes sensor status, and transfers results through a communications interface. Its 20 MHz clock supports timely interrupt service and foreground polling, while the ROMless architecture lets the program memory scale with logging, calibration, and protocol requirements. The 8-bit architecture is well matched to supervisory tasks where the module does not need high-level operating-system support. External memory timing and loading must be designed carefully, and the measured accuracy of the acquisition chain will depend primarily on the selected sensors and interface circuitry. Verify available I/O, timers, and operating-temperature limits in the manufacturer documentation.

🏭

Programmable Logic Controllers

The Z86C9320VSC is well suited to legacy or dedicated programmable-logic-controller designs that use an 8-bit control engine, deterministic I/O handling, and externally stored application logic. Its 20 MHz operating frequency provides useful instruction throughput for scanning inputs, evaluating logic, updating outputs, and communicating with programming or supervisory equipment. Using a 44-pin PLCC controller can simplify repair and upgrade paths for equipment originally designed around the Z86C93 family. Because the MCU is ROMless, field-programmable behavior depends on the memory device and programming arrangement selected by the system designer. Review watchdog, reset, electrical-noise, and isolation requirements before adapting the controller to safety-related machinery.

🔧

Appliance and HVAC Controllers

The Z86C9320VSC can coordinate an appliance or HVAC controller that must interpret switches, sensors, timers, and communication commands in real time. Its 20 MHz 8-bit architecture provides sufficient control bandwidth for typical sequencers, while the external program-memory interface allows different product features to be implemented without changing the controller package. The 44-pin PLCC format is useful for serviceable controller boards where socketed assembly and field replacement have practical value. Input conditioning, output-driver protection, and safety interlocks remain external system responsibilities. Confirm whether the available I/O and timers satisfy the appliance specification and whether the operating-temperature grade is appropriate for the enclosure's worst-case environment.

📡

Embedded Communication Equipment

The Z86C9320VSC is appropriate for embedded communication equipment that performs protocol framing, routing, supervisory logic, and peripheral control around a dedicated communications processor. Its 20 MHz clock supports time-sensitive service routines, and the ROMless configuration permits firmware to be stored in external nonvolatile memory for field updates or application-specific code. The familiar 44-pin PLCC package can reduce redesign effort when maintaining Z8-based communications hardware. The system designer must verify available serial channels, interrupt latency, external-memory timing, and clock accuracy for the selected baud rate. Power-supply layout and communication-line isolation should also be engineered independently, especially in industrial environments with significant electromagnetic noise.

What is the Z86C9320VSC?
The Z86C9320VSC is an 8-bit, 20 MHz ROMless Z8 microcontroller from Zilog packaged in a 44-pin PLCC. According to the manufacturer datasheet, it is a member of the Z86C93 family and requires an external program-memory device rather than using embedded ROM. This makes it appropriate for embedded systems where firmware capacity, updateability, or code separation is important.
What is the operating frequency of Z86C9320VSC?
The Z86C9320VSC operates at up to 20 MHz. According to the manufacturer datasheet, this clock rate gives the 8-bit processor substantially more instruction throughput than lower-speed 8-bit controllers, while retaining the simplicity associated with the Z8 architecture. Actual system performance also depends on wait states, external-memory access time, interrupts, and peripheral configuration.
Why is the Z86C9320VSC called a ROMless microcontroller?
The Z86C9320VSC is called ROMless because its program code is stored in an external memory device instead of internal ROM. According to the manufacturer datasheet, the controller's external-memory interface permits greater firmware flexibility than a fixed-program-memory MCU. The design must account for address multiplexing, memory timing, address decoding, and programming implementation in the connected external memory.
What package does the Z86C9320VSC use?
The Z86C9320VSC uses a 44-pin PLCC package. According to the manufacturer datasheet and product listings, the package supports a socketed or board-level legacy-controller implementation. Because PLCC is not represented by a dedicated package-diagram library entry, use the manufacturer pin-description table and package drawing when assigning PCB tracks, socket orientation, and pin numbering.
Where can I download the Z86C9320VSC datasheet PDF?
The Z86C9320VSC datasheet PDF is available through the linked datasheet source on this page. According to the manufacturer document, it contains the authoritative device description, electrical characteristics, pin descriptions, and application information. Use that document for final schematic, timing, programming, and layout decisions rather than relying on abbreviated catalog pages or comparison listings.
Where can I find the Z86C9320VSC pinout?
The Z86C9320VSC pinout is found in the manufacturer datasheet's pin-description table. The device is identified as a 44-pin PLCC, but the exact signal assigned to every numbered lead must be taken from the package drawing rather than inferred from a generic PLCC footprint. Use the manufacturer's pin table to confirm address-bus, data-bus, control, clock, reset, and I/O assignments before PCB release.
What are the key specifications of Z86C9320VSC that engineers should know?
The key Z86C9320VSC specifications are an 8-bit processor, 20 MHz maximum clock frequency, ROMless operation, and a 44-pin PLCC package. According to the manufacturer datasheet, the device is the C93 member of the Z86C93 family. These figures establish its performance class, but supply voltage, I/O count, memory timing, and peripheral details must be taken from the complete electrical and pin tables.
Is Z86C9320VSC suitable for industrial control systems?
The Z86C9320VSC can be suitable for industrial control systems when its operating-temperature, supply-voltage, and interface requirements match the installation environment. According to the manufacturer datasheet, its 20 MHz 8-bit Z8 architecture and external program-memory interface fit deterministic embedded-control tasks. Confirm environmental ratings, isolation requirements, watchdog behavior, and long-term availability before approving a production design.
What is the best drop-in replacement for Z86C9320VSC?
The Z86C9320VSG is the clearest drop-in candidate because it retains the 20 MHz, 44-pin PLCC configuration and is described as completely replaceable without PCB modification. According to the cross-reference information, its terminals and package are consistent with the Z86C9320VSC. Check the exact temperature grade, qualification markings, and device revision before production substitution.
What can replace Z86C9320VSC?
The Z86C9320VSG can replace the Z86C9320VSC in the same 44-pin PLCC design, with the listed technical comparison identifying compatible terminals and package characteristics. According to the cross-reference listing, replacement requires no board modification. Other Z86C93 and related Z8 variants may provide alternate functions or thermal grades, so their pin and electrical requirements must be reviewed individually.
Is Z86C9320VSC the same as Z86C9320VSG?
The Z86C9320VSC and Z86C9320VSG are presented as functionally and package-compatible 20 MHz, 44-pin PLCC devices. According to the comparison listing, their terminals and packages are consistent and the replacement does not require PCB changes. The suffix may identify a different orderable grade or qualification, so verify the temperature range, marking, and production requirements before treating them as identical.
Z86C9320VSC vs Z86C9320VSG: which is better for an existing design?
Choose whichever Z86C9320VSC or Z86C9320VSG orderable variant matches the required temperature grade and qualification. According to the cross-reference information, both provide a 20 MHz, 44-pin PLCC configuration and can be interchanged without PCB modification. For an existing board, preserving the original ordering code is safest unless the manufacturer confirms a broader replacement qualification.
When should I choose Z86C9320VSC over another 8-bit ROMless MCU?
Choose the Z86C9320VSC when an existing Z8 design uses the 44-pin PLCC footprint, requires a 20 MHz 8-bit controller, and benefits from continuation of the Z86C93 software and hardware ecosystem. According to the manufacturer datasheet, ROMless operation supports external program storage. Select a different MCU when software tooling, peripheral requirements, package technology, or qualification demands fall outside this family.
Is Z86C9320VSC in stock and what is its lead time?
Current stock and lead time should be requested through the Request a Quote form on this page. According to current catalog results, the Z86C9320VSC remains listed for order, but a listing alone does not establish a guaranteed stock quantity or shipment date. Provide the required quantity, date code, packaging preference, and target delivery location so the current supply position can be confirmed.
Where can I buy Z86C9320VSC online?
Use the Request a Quote form on this page to inquire about Z86C9320VSC availability, pricing, and lead time. According to current catalog information, the exact 8-bit, 20 MHz, 44-pin PLCC orderable part is actively offered. For production purchasing, specify quantity, date-code requirement, packaging, and inspection needs so the commercial response reflects the complete BOM commitment.
What is the price of Z86C9320VSC?
The current price of Z86C9320VSC depends on quantity, date code, packaging, and supply conditions. Use the Request a Quote form on this page for a current quotation rather than relying on a historical catalog amount. According to the exact-part requirement for procurement, include the full MPN Z86C9320VSC and any required operating-grade or inspection specifications in the request.

Dữ liệu tham khảo kỹ thuật cho Z86C9320VSC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the Z86C9320VSC when maintaining or reproducing a Z86C93-based design that uses an 8-bit, 20 MHz ROMless controller in a 44-pin PLCC package. It is particularly suitable for legacy industrial controllers, serial bridges, data-acquisition modules, and serviceable appliance or HVAC boards. Prefer the Z86C9320VSG when a second orderable version is desired for the same documented footprint and frequency. Consider Z86C9325VSG or Z86C9325ASG when their additional or different family features match the product specification, but verify their pin-level differences before substitution. Z86C9333VSG is the lower-proximity option and should be selected only after checking all peripheral, timing, memory-interface, and environmental requirements. For new compact products, a modern surface-mount MCU may offer smaller size and newer tools, but the Z86C9320VSC remains advantageous when PLCC compatibility and Z8 family continuity are priorities.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này Z86C9320VSG Z86C9320ASG Z86C9325VSG Z86C9325ASG Z86C9333VSG
Package PLCC-44 PLCC-44 PLCC-44 PLCC-44 PLCC-44 PLCC-44
Brand Zilog Zilog Zilog Zilog Zilog Zilog
Pin Count 44 pins 44 pins 44 pins 44 pins 44 pins 44 pins
Series Z86C93 Z86C93 Z86C93 Z86C93 Z86C93 Z86C93

Bảo phân biệt quan trọng

  • Direct same-footprint replacement candidate (vsZ86C9320VSG)
  • Established Z86C93 control-platform continuity (vsZ86C9333VSG)
  • External-memory firmware flexibility (vsZ86C9325VSG)

Ghi chú thiết kế

Route the external program-memory interface according to the manufacturer's pin and timing guidance, paying particular attention to address, data, and control-line topology. PLCC socket or land patterns do not establish the correct function of each pin, so assign every connection from the manufacturer pin-description table rather than from package position alone. Keep memory traces short where practical and place termination only when the controller's documented interface and signal conditions require it.

Apply the manufacturer's recommended bypass-capacitor arrangement directly at the controller supply pins and isolate noisy switching circuitry from sensitive logic. The external program memory may require its own local decoupling and sequenced power arrangement. Because the available electrical table does not establish the operating supply range, do not infer a voltage margin; use the exact limits, absolute maximum ratings, and startup requirements from the manufacturer datasheet before selecting regulators.

A ROMless MCU requires external program storage, and a PLCC package does not guarantee that any similarly named controller is interchangeable. Compare pin assignments, interrupt vectors, peripheral resources, reset behavior, timing, and ordering-grade markings before substituting a candidate. The Z86C9320VSG has the strongest documented replacement case, but production qualification should still include the exact manufacturer ordering information and an electrical comparison.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for this exact MPN. AEC-Q100 is not applicable because the product is an industrial and commercial embedded microcontroller rather than an automotive-qualified device.

Dữ liệu được xác minh vào: 2026-11-17 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

Z86C9320VSC datasheet Z86C9320VSC pinout Z86C9320VSC datasheet pdf Z86C9320VSC equivalent Z86C9320VSC replacement Z86C9320VSC drop-in replacement Z86C9320VSC cross reference Z86C9320VSC vs Z86C9320VSG Z86C9320VSC 44 pin PLCC Z86C9320VSC 20MHz ROMless Z86C9320VSC application circuit Z86C9320VSC price Z86C9320VSC stock Zilog Z86C9320VSC

Các bộ phận và thuật ngữ liên quan

Zilog Z86C9320VSC Z86C9320VSG Z86C9320ASG Z86C9325VSG Z86C9325ASG Z86C9333VSG Z8 architecture 8-bit microcontroller ROMless microcontroller embedded controller Z86C93 series C93 device 20 MHz clock 44-pin PLCC PLCC package surface mount external program memory industrial control serial communication bridge data acquisition programmable logic controller embedded communication equipment
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ