Zilog

Z86E4016FSC - 16MHz 8-Bit OTP Microcontroller | Zilog

MPN: Z86E4016FSC ✓ Hoạt động
44-LQFP, 10 x 10 mm Package 16 MHz Speed 4 KB OTP Memory
MOQ: 1 |

Z86E4016FSC Tóm tắt

Zilog, Inc. Z86E4016FSC is an 8-bit Z8 microcontroller operating at 16 MHz with 4 KB of one-time-programmable memory in a 44-LQFP 10 x 10 mm package. It is designed for compact embedded control systems that require deterministic 8-bit processing, OTP program storage, and a relatively high pin count for mixed-signal and peripheral connections.

A microcontroller is a programmable semiconductor that integrates a processor core, program memory, data memory, I/O ports, and supporting peripherals onto one device. The Z86E4016FSC belongs to the Z8 family of 8-bit microcontrollers, combining simple instruction-based control with integrated embedded resources. Its 16 MHz operating speed supports responsive control loops in applications that do not require the processing power or memory bandwidth of a 16-bit or 32-bit MCU.

The most important headline characteristics are its 16 MHz clock rate, 4 KB OTP program memory, and 8-bit architecture. Because OTP memory is programmed once during manufacturing or provisioning, the device is well suited to products whose firmware and configuration are fixed before shipment. This differs from a field-programmable Flash MCU, making OTP convenient for cost-sensitive volume production but unsuitable when frequent firmware updates are required.

The 44-LQFP package provides substantially more connection options than a small 8- or 20-pin controller. That pin count can accommodate digital I/O, control outputs, communications, analog functions, and programming or debug signals more flexibly. However, the exact pin assignments, peripheral mix, voltage limits, and electrical characteristics must be confirmed in the manufacturer datasheet before the package is assigned to a PCB layout.

Typical uses include appliance controllers, building-control interfaces, industrial control modules, keyboard and human-interface controllers, sensor-conditioning systems, and small embedded products with fixed firmware. The 16 MHz clock and 8-bit architecture are particularly appropriate for supervisory control, state-machine execution, signal scanning, and actuator coordination rather than high-bandwidth data processing.

Designers should begin with the manufacturer pin-description table and electrical characteristics, then verify oscillator, reset, programming, and I/O requirements against the intended schematic. Because the program memory is OTP, firmware validation and manufacturing-programming workflow must be completed before devices are committed to a production build.

This page consolidates the core Z86E4016FSC identity, verified package and memory characteristics, sourcing guidance, replacement considerations, and practical selection criteria into a concise engineering reference. It is intended to accelerate initial design review while directing final PCB, firmware, and qualification decisions to the authoritative manufacturer documentation.

Bộ thay thế dễ dàng lắp đặt cho Z86E4016FSC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với Z86E4016FSC (cùng hình factor và footprint).

Z86E4016AEG

✅ Drop-In
Zilog
📦 44-LQFP (10 x 10 mm)
8-bit Z8 CISC microcontroller · 16 MHz · One-Time Programmable (OTP) · 4 KB (4K x 8) · 236 bytes · 4.5 V to 5.5 V · Z8 CISC · 44-pin LQFP

Liên hệ để biết giá

Xem tài liệu →

Z86E4016FSC Tỷ lệ tối đa & tính chất điện

Device Type 8-bit microcontroller
Series Z8
Maximum CPU Frequency 16 MHz
Program Memory 4 KB OTP
Program Memory Organization 4K x 8 bits
Architecture 8-bit
Hộp 44-LQFP, 10 x 10 mm
Kiểu lắp đặt Surface mount
Số lượng chân 44 pins
Programming Method One-time programmable
Manufacturer Zilog, Inc.

Hướng dẫn cấu hình chân Z86E4016FSC 44-lqfp, 10 x 10 mm

Cấu hình chân cho Z86E4016FSC (44-lqfp, 10 x 10 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 44-lqfp, 10 x 10 mm cho Z86E4016FSC

Không có dữ liệu chân cụ thể sẵn có cho Z86E4016FSC.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

Z86E4016FSC phù hợp cho 6 Áp dụngs: Appliance Control Module, Industrial Sensor Interface, Building Control Interface, Keyboard and Human Interface, Actuator and Relay Sequencer, Programmable Logic Controller.

⚡

Appliance Control Module

The Z86E4016FSC is suited to fixed-function appliance controllers because it combines a 16 MHz 8-bit processor with 4 KB of OTP program storage. The OTP architecture supports code and configuration that are finalized before shipment, while the 44-LQFP package provides more connections for switches, indicators, motor-control signals, and sensor inputs. Its limited 4 KB program space makes careful code sizing essential, but it can support compact supervisory loops and fixed state machines. The principal engineering benefit is a dedicated one-time-programmed controller instead of a general-purpose MCU, although production programming and firmware validation must be completed before deployment.

🏭

Industrial Sensor Interface

The Z86E4016FSC can serve as the local controller for a multi-sensor industrial interface where an 8-bit 16 MHz processor is sufficient for scanning, filtering, threshold evaluation, and data packaging. Its 44-LQFP package offers more I/O opportunities than a minimal controller, which can reduce multiplexing and simplify board partitioning. The 4 KB OTP memory should hold only the required acquisition, conditioning, and reporting logic. Because industrial temperature range, analog accuracy, and interface electrical limits are not established by the basic catalog identity, those requirements must be verified before the controller is approved for production equipment.

🧩

Building Control Interface

The Z86E4016FSC is appropriate for fixed building-control endpoints that monitor inputs and drive discrete outputs, such as occupancy interfaces, HVAC control modules, or lighting-control auxiliaries. The 16 MHz clock supports responsive polling and deterministic control sequences, while OTP storage fits a controller whose firmware is configured for a specific installed function. The 44-LQFP pin count provides additional connections for contact inputs, relay drivers, status indicators, and communications. Low-power behavior, output drive capability, and environmental limits must be checked in the manufacturer documentation because the final enclosure and load conditions determine the required interface design.

🔧

Keyboard and Human Interface

The Z86E4016FSC can implement key scanning, debouncing, status feedback, and host communication in a dedicated human-interface controller. At 16 MHz, the 8-bit processor has ample timing margin for scanning multiple inputs while executing a compact protocol stack. The 44-LQFP package is useful when the design also needs indicators, programmable controls, or external interface signals beyond a very small matrix keypad. The 4 KB OTP limit favors simple, stable firmware because every update requires a new programming operation. Mechanical switch timing, debounce strategy, ESD requirements, and host protocol expectations should be validated during prototype testing.

⚡

Actuator and Relay Sequencer

The Z86E4016FSC can coordinate relays, solenoids, lamps, and discrete actuators through a fixed sequencing controller. Its 16 MHz processing rate supports deterministic timing tables, interlocks, debounce logic, and fault-state handling within the constraints of a 4 KB OTP program. The 44-LQFP package offers enough pins to separate input sensing, output control, status indication, and communications. Since inductive loads require external drive and protection circuitry, the MCU should remain responsible for command sequencing rather than direct high-energy switching. Output drive ratings, isolation, flyback paths, and shutdown behavior require validation against the final load topology.

🏭

Programmable Logic Controller

The Z86E4016FSC can serve as a small programmable logic controller for fixed sequences such as timers, counters, interlocks, and simple machine-step control. Its 8-bit Z8 processor and 16 MHz clock are suitable for straightforward ladder-like logic translated into compact firmware, while 4 KB OTP supports a fixed production configuration. The 44-LQFP package provides a broad pin base for discrete field inputs and outputs. It is best suited to compact, single-product controllers rather than broadly reconfigurable industrial platforms. Memory headroom, electrical isolation, watchdog behavior, and environmental requirements should be confirmed before use in safety-adjacent or high-availability machinery.

What is the Z86E4016FSC?
The Z86E4016FSC is an 8-bit Zilog Z8 microcontroller with a 16 MHz maximum clock, 4 KB of OTP program memory, and a 44-LQFP package. The Z8 architecture combines a processor core, embedded program storage, I/O, and controller peripherals in one surface-mount device. Its architecture is intended for compact fixed-function control products where 8-bit processing and one-time firmware programming are sufficient.
What are the key specifications of Z86E4016FSC that engineers should know?
The key Z86E4016FSC specifications are a 16 MHz maximum CPU frequency, 4 KB of 4K x 8-bit one-time-programmable memory, an 8-bit Z8 architecture, and a 44-LQFP 10 x 10 mm package. These characteristics place it between simple logic controllers and higher-end Flash microcontrollers. Exact I/O ratings, voltage limits, RAM, timers, and peripheral functions must be confirmed in the manufacturer datasheet.
What is the operating frequency of Z86E4016FSC?
The Z86E4016FSC operates at up to 16 MHz. This clock rate supports responsive state-machine execution, input scanning, timing, and supervisory control in embedded products. It does not imply a 16-bit instruction set: the device uses an 8-bit Z8 architecture. Configuration, reset, and oscillator implementation should follow the device-specific application guidance in the manufacturer datasheet.
How much program memory does Z86E4016FSC contain?
The Z86E4016FSC contains 4 KB of one-time-programmable program memory organized as 4K x 8 bits. OTP permits the final firmware to be written once and then supports a fixed-function production design. It does not provide the repeated in-circuit rewriting normally expected from Flash memory, so firmware release, programming, and manufacturing controls must be planned before volume production.
What package does Z86E4016FSC use?
The Z86E4016FSC uses a 44-LQFP package measuring 10 x 10 mm. This relatively high pin count provides more external connections than a small leaded controller and can simplify mixed peripheral, control, and communications assignments. The manufacturer pin-description table and land-pattern information must govern the PCB footprint, pin 1 orientation, and exposed or no-connect assignments.
Where can I download the Z86E4016FSC datasheet PDF?
The Z86E4016FSC datasheet can be accessed through the product-document link on this page, and a manufacturer-datasheet mirror is also listed among the document sources. The 64-page PDF mirror identifies the part as an 8-bit, 16 MHz, 4 KB OTP Z8 microcontroller. Use the pin-description table, electrical characteristics, and package drawings for design release rather than relying on catalog summaries alone.
Where can I find the Z86E4016FSC pinout?
The Z86E4016FSC pinout is found in the pin-description table and package drawing in the manufacturer datasheet. The device is packaged in 44-LQFP, so all 44 physical positions should be assigned during schematic review, including reserved, power, ground, programming, and no-connect pins. The page image follows the package standard numbering, but the datasheet remains controlling for the exact terminal functions.
What can replace the Z86E4016FSC?
A valid replacement must match the Z86E4016FSC in 44-LQFP footprint, pin functions, voltage range, clock requirements, memory organization, and OTP programming method. Z86E4016AEG is the closest same-family candidate located for comparison, but qualification still depends on its package drawing and device characteristics. No cross-brand drop-in replacement was established from the available component cross-reference results.
Can Z86E4016AEG replace Z86E4016FSC?
Z86E4016AEG may be considered as a same-family Z86E4016 candidate, but it should not be treated as an automatic drop-in replacement until its 44-LQFP pin mapping, voltage range, clock configuration, OTP capacity, and programming sequence are checked against the Z86E4016FSC datasheet. Package similarity alone does not establish pin-to-pin compatibility. Perform a complete schematic and timing review before substitution.
When should I choose Z86E4016FSC over a Flash microcontroller?
Choose the Z86E4016FSC when the product will be programmed once, the 8-bit architecture is sufficient, and the 44-LQFP footprint provides useful peripheral and I/O flexibility. Its 4 KB OTP configuration can simplify fixed-product manufacturing. Select a Flash MCU instead when firmware must be updated in the field, the application exceeds the available program memory, or a larger ecosystem and peripheral set is required.
Is Z86E4016FSC suitable for industrial control applications?
The Z86E4016FSC is potentially suitable for supervisory and fixed-function industrial control, provided its operating-temperature range, supply-voltage limits, timing, and I/O ratings satisfy the equipment requirements. The 16 MHz 8-bit processor can execute control states, scan inputs, and coordinate actuators. Industrial qualification, environmental robustness, and long-term availability must be confirmed separately for each production program.
Z86E4016FSC vs Z86E4016AEG: which is better?
Neither part is automatically better until their package drawings, pin functions, electrical limits, and device options are compared. Z86E4016AEG is a same-family candidate that can justify a second-source review because it remains within the Z86E4016 product line. If it uses the same 44-LQFP footprint and preserves every required pin function, it may support a drop-in transition; otherwise, the PCB or firmware may require modification.
What is the best cross-brand equivalent for Z86E4016FSC?
No cross-brand equivalent was established as a guaranteed drop-in replacement for the Z86E4016FSC. A qualifying substitute must retain the 44-LQFP land pattern, complete pin compatibility, 16 MHz-class timing, 4 KB OTP memory, and controller-specific programming behavior. The cross-reference results identify search tools and similar listings but do not verify a cross-brand pin-to-pin part, so none should be approved without engineering review.
Where can I buy Z86E4016FSC online?
Use the Request a Quote form on this page to request Z86E4016FSC availability, MOQ, lead time, and a current quotation. The request should identify the exact 44-LQFP ordering code Z86E4016FSC so that the returned supply proposal corresponds to the required package and program-memory configuration. Stock status should be confirmed at the time of the request.
What is the price of Z86E4016FSC?
The current commercial price is best obtained through the Request a Quote form on this page, where quantity, packaging, delivery schedule, and supply availability can be evaluated together. The structured pricing area on the page reflects qualifying catalog data when available. For design budgeting, account separately for OTP programming, firmware validation, tooling, and production planning because those costs are not represented by the component quotation alone.
What is the lead time and stock status for Z86E4016FSC?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this page. Lead time for an OTP microcontroller can depend on firmware-programming readiness, programming capacity, inspection, and delivery quantity, not only component inventory. Provide the approved firmware image and production schedule early so the supply plan reflects the complete manufacturing process.

Dữ liệu tham khảo kỹ thuật cho Z86E4016FSC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose Z86E4016FSC for a compact, fixed-function control product that needs an 8-bit 16 MHz processor, 4 KB of OTP program storage, and a 44-LQFP footprint. It is particularly appropriate when firmware is finalized before production and repeated field updates are unnecessary. Z86E4016AEG is the closest same-family alternative for second-source evaluation; retain it only after checking pin functions, voltage limits, temperature grade, and OTP programming compatibility. For applications requiring field-reprogrammable Flash memory, substantially more program space, or a larger peripheral ecosystem, select a general-purpose Flash MCU rather than forcing an OTP controller into that role. Likewise, choose a larger controller when I/O count, communications, safety features, or expansion requirements exceed what the Z86E4016FSC can support. Final qualification should include firmware verification, timing review, temperature validation, and PCB-footprint comparison.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này Z86E4016AEG
Brand Zilog, Inc. Zilog, Inc.
Package 44-LQFP (10 x 10 mm) 44-LQFP (10 x 10 mm)
CPU Architecture 8-bit Z8 8-bit Z8
Maximum CPU Frequency 16 MHz 16 MHz
Program Memory 4 KB OTP 4 KB OTP
Program Memory Organization 4K x 8 bits 4K x 8 bits
Programming Method One-time programmable One-time programmable

Bảo phân biệt quan trọng

  • One-time-programmable configuration supports fixed-production firmware (vsZ86E4016AEG)
  • 16 MHz processing in an 8-bit embedded architecture (vsZ86E4016AEG)
  • 44-LQFP footprint expands external connection options (vsZ86E4016AEG)

Ghi chú thiết kế

Treat OTP programming as a production-control checkpoint rather than a firmware-development workflow. Validate the complete image in simulation and on prototype hardware, then lock and approve the release before programming. OTPs cannot be erased for a standard firmware update, so a single bit or configuration error can require replacement of the programmed device. Retain revision control, programming traceability, and a known-good master image for every approved production release.

Assign all 44 physical LQFP positions in the schematic library and PCB footprint, including power, ground, programming, reset, oscillator, and no-connect terminals. Confirm pin 1 orientation against the package drawing and verify courtyard, land length, solder-mask, and paste geometry using the manufacturer's recommended land pattern. The 10 x 10 mm LQFP is mechanically small enough that solder bridging and assembly alignment deserve inspection at fine pitch.

Design the power rails around the exact operating-voltage limits, oscillator requirements, and I/O load specified by the manufacturer datasheet. Provide local decoupling close to the supply and ground pins, and route return currents without sharing narrow paths with switching or high-current actuator branches. If the device controls relays, solenoids, or lamps, use suitable driver stages and protection networks rather than relying on MCU pins for inductive loads.

Separate clock, programming, and sensitive input routing from motor-control and switching nodes. Keep the oscillator loop compact, maintain a continuous ground reference, and avoid routing high-current return paths beneath the MCU or its decoupling capacitors. For externally connected I/O, use the package's unused pins and documented input states deliberately; this prevents floating inputs and provides a predictable behavior when field wiring is disconnected.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Compliance declarations were not established by the available product records. Confirm RoHS, REACH, lead-free, halogen-free, and automotive qualification status with Zilog before procurement or production release.

Dữ liệu được xác minh vào: 2026-11-17 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

Z86E4016FSC datasheet Z86E4016FSC datasheet pdf Z86E4016FSC pinout Z86E4016FSC equivalent Z86E4016FSC replacement Z86E4016FSC cross reference Z86E4016FSC price Z86E4016FSC stock Zilog Z86E4016FSC Z86E4016 44-LQFP pinout Z86E4016FSC vs Z86E4016AEG Z86E4016 16MHz OTP microcontroller

Các bộ phận và thuật ngữ liên quan

Zilog, Inc. Z86E4016FSC Z86E4016AEG Z86E4016PSC Z8 8-bit microcontroller embedded microcontroller semiconductor OTP memory one-time programmable memory 16 MHz 4 KB OTP 4K x 8 bits 44-LQFP LQFP package family surface mount SMD general-purpose I/O appliance controller industrial control building control human interface actuator sequencing programmable logic controller
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ