TI RES80A-Q1 divider signals where EV-grade passives are headed for HV BMS

TI rolls an AEC-Q200 50 MΩ divider rated to 2,000 V DC for EV battery management, underscoring how automotive specs now reshape passive-component sourcing.

已發布 已更新 4 分鐘閱讀 ✓ 支援 AI 分享

TL;DR — 三句話摘要

  • TI released the RES80A-Q1, a 50 MΩ precision divider rated to 2,000 V DC and qualified to AEC-Q200, primarily for EV battery management. (S1)
  • Initial ratio accuracy is ±0.1% (max) with lifetime drift held inside ±0.3% (max) without calibration. (S1)
  • The 8-pin SOIC keeps creepage and clearance between HV and LV pins at ≥ 8.5 mm to meet safety mandates. (S1)

取自 key_takeaways （實際欄位，最多 3 筆）。事實與分析分別標示。

TI RES80A-Q1 divider signals where EV-grade passives are headed for HV BMSEditorial cover for a component sourcing brief. Power motif; headline "TI RES80A-Q1 divider signals where EV-grade passives are headed for HV BMS". Reported key numbers: 2,000 V DC. 1 cited source. Static cover (no animation).TI RES80A-Q1 divider signals whereEV-grade passives are headed for HV BMSREPORTED KEY NUMBERS2,000 V DC1 sourceXAIPART
Cover image generated from data already shown on this page: the category motif, the headline, and reported key numbers. No decorative illustration; no third-party image.

您來自 AI 回答 — 這是可驗證的原始內容

AI 摘要可能遺漏了其主張的依據。原始預測、受影響零件及每一項引用皆在本頁，且均可追溯至其來源。

XAIPART 預測

本簡報包含可證偽的預測。

跳至完整預測及其證偽規則 ›
受影響零件

此報導無目錄相符項目 — 寧可不顯示，也不推斷相符。

查看判定方式 ›
正在尋找零件？送出詢價 → RFQ

Reported by EDN on 2026-10-17. Summarized and analyzed by XAIPART Editorial.

What happened

Texas Instruments has released the RES80A-Q1, a precision-resistive divider aimed at high-voltage EV battery packs and qualified to AEC-Q200, the automotive-grade rating for passive components.S1 The article framed the part as an example of how the growing sophistication of EV, hybrid and even internal combustion drivetrains is reshaping requirements for passive components.S1

The device is a matched-resistor divider that scales a high bus voltage down to a level the battery management system (BMS) can measure.S1 It is built on a high-performance analog-wafer process with an insulative silicon dioxide (SiO2) layer encapsulating the resistors, enabling sustained operation at up to 2,000 V DC.S1

Housed in an 8-pin SOIC measuring 7.5 mm by 5.85 mm, the package maintains creepage and clearance of at least 8.5 mm between high-voltage and low-voltage pins to meet safety mandates.S1 Ratio-matching precision is within ±0.1% (max), with cumulative drift of ±0.2% (max) over the specified temperature range and aging, keeping the uncalibrated lifetime tolerance inside ±0.3% (max).S1

The part is sold as a standard catalog item rather than a custom device, which the article says makes it accessible to non-automotive designs facing high-voltage sensing without a low-volume custom run.S1 EDN also notes that the broader move toward more electronic content per car is making diagnostics harder and replacement parts more vehicle-specific, citing the author's two-month wait for a 2019-model electronic door-lock module as an example.S1

Key numbers from the source
MetricReported valueSource
AEC qualificationAEC-Q200[S1]
Total resistance50 MΩ[S1]
Sustained high-voltage rating2,000 V DC[S1]
Package (8-pin SOIC body)7.5 mm × 5.85 mm[S1]
Creepage / clearance (HV to LV pins)≥ 8.5 mm[S1]
Initial ratio accuracy±0.1% (max)[S1]
Lifetime drift envelope±0.3% (max), uncalibrated[S1]
Average age of U.S. car on the roadOver 12 years (per Kelley Blue Book, cited by EDN)[S1]

Background timeline

  1. No prior milestones disclosed by the source.

XAIPART take

Technical impact

The RES80A-Q1 collapses what would historically have been a discrete resistor-string plus isolation barrier into a single AEC-Q200-qualified SOIC with guaranteed ratio matching. XAIPART analysis For 400 V and 800 V EV packs, the 2,000 V DC headroom is the relevant design envelope, and the 8.5 mm creepage lets the divider sit close to the bus while still satisfying IEC 60664-style spacing rules. XAIPART analysis Designers get a calibrated ratiometric output that can be paired with a lower-voltage ADC rather than a dedicated high-voltage front end, which is the real board-level simplification.

Market impact

Offering the part as a catalog device, not a custom, lowers the barrier for industrial, renewable-energy and medical high-voltage projects to inherit an automotive-qualified passive. XAIPART analysis Sourcing teams should expect TI to defend the line on long-term availability rather than price, given that AEC-Q200 qualifications tend to lock in multi-year production windows. XAIPART analysis Competing high-voltage divider modules from Murata, Vishay and Yageo are likely to follow with matched AEC-Q200 parts in similar SOIC footprints, which is worth tracking if a second source is required.

Action

Verify that 8.5 mm creepage clears the target PCB layout at the planned pack voltage before assigning the part number, and confirm the SOIC footprint fits the BMS ADC reference input range without an additional buffer. XAIPART analysis Cross-check the temperature and humidity profiles in datasheet revisions against the application environment; asking TI for a PPAP-style or change-control letter now is cheaper than a redesign if the part is later revised.

XAIPART Forecast

XAIPART expects that by Q3 2027 at least one second-source supplier will publish an AEC-Q200 high-voltage resistive divider with a ≥ 1,500 V DC rating in a sub-10 mm SOIC footprint; if no such competing part appears in TI distributor catalogs by 2027-09-30, this forecast is wrong. XAIPART analysis

Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. Pricing, lead time and second-source availability for the RES80A-Q1 were not disclosed by the source; the average-car-age figure rests on a single external citation (Kelley Blue Book) reported by EDN.

Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.

替代品與生命週期

已建檔的替代品——目錄範圍，並非市場排名
零件關係生命週期依據
— 檔案中無替代品 需要資料 — 需要 match_type 在任何前代標籤出現之前

「前代」與「替代」標籤僅來自已記錄的相符類型、生命週期狀態或來源文字。未記錄相符項目時，不顯示任何標籤。我們自家的刊登內容不構成市場參考。

值得關注

可證偽預測 — 門檻、時間窗與目前狀態。已證偽的預測仍保留可見。
主張門檻作者狀態
XAIPART expects that by Q3 2027 at least one second-source supplier will publish an AEC-Q200 high-voltage resistive divider with a ≥ 1,500 V DC rating in a sub-10 mm SOIC footprint no such competing part appears in TI distributor catalogs by 2027-09-30 Pending

事後證明錯誤的預測會保留可見並加以標記。我們不會刪除。

受影響零件

無目錄相符項目。 此消息未對應到 XAIPART 目前上架的任何零件。我們不會推測相符項目，也不會顯示佔位清單。

各維度成本壓力

Source: FRED · Generated · reference output z and composite are algorithm outputs, not a fetch snapshot

Cost pressure by dimension — composite stateDiverging bars for three dimensions around a zero midpoint. Input Cost has no reading; Supply Demand z -1.4711, notable; Fx Energy z 0.1243, neutral. Composite index -10.1, band neutral.0Input costno readingSupply/demandz −1.4711 · notable46 dFX & energyz +0.1243 · neutral5 dcomposite −10.1 · neutral−100 · −40 · −15 · 0 · +15 · +40 · +100
Underlying values — copyable for verification.
DimensionFRED series IDUnitLagAs of
Input costPCOPPUSDM, PALUMUSDM, PNICKUSDMUSD/mt52 d
Supply/demandPCU334413334413, IPG3344Sindex(1982=100) / index(2017=100)46 d
FX & energyDEXCHUS, DCOILBRENTEU, DHHNGSPrate / USD/bbl / USD/MMBtu5 d

No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.

本內容的產生方式

流程證據 — 擷取、來源合理性、模型與閘門
此簡報的稽核軌跡
Source fetched EDN · www.edn.com · 11,364 chars · fetch status success
Source sanity (S1) ok — passed before any model call (no s1_ block recorded)
Model / prompt MiniMax-M3 · prompt Blog Agent - News Summary (v2.8-final) · 8,800 tokens · 28.1s · run completed
Gate verdict pass · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.012129 · C10 rounds 0

上述每一列皆由流程產生，並非人工撰寫。

編輯評分

確定性閘門結果 — 純 PHP，判定過程無模型參與
閘門評分明細 6 項適用檢查， 6通過： 100 百分比. No hold items or mandatory failures. Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.7121. 適用檢查已通過 6 / 6 = 100% · 判定： pass No hold items or mandatory failures Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.7121 是否發布由審核關卡決定。獨立稽核分數僅供參考。

相關報導

發現錯誤？ 告訴我們哪裡有誤 ——更正會與原文一同發布並記錄。我們不會默默修改文章。

留言

成為第一個留言的人。

來源

  1. Automotive demands driving passive components to extreme performance — https://www.edn.com/automotive-demands-driving-passive-components-to-extreme-performance/ · rss · 存取於

事實標記為 S1/S2，並可追溯至連結來源。標示為 分析 是 XAIPART 自身的推理，與報導事實分開保留。來源連結會被追蹤，而非 nofollow ——署名為刻意為之。