Semiconductor News · 採購簡報

Zalman S6 Black and S6 V2 Black mid-towers land at $79.99: what it means for ATX builds

Zalman launches two near-identical ATX mid-towers, the S6 Black at $79.99 and the V2 Black with extra RGB fans, both supporting 345 mm GPUs and 360 mm radiators.

已發布 已更新 4 分鐘閱讀 ✓ 支援 AI 分享

TL;DR — 三句話摘要

  • Zalman launched the S6 Black and S6 V2 Black ATX mid-towers, both measuring 412 x 215 x 486 mm. (S1)
  • The S6 Black lists at $79.99 on Zalman USA; the S6 V2 Black price is not disclosed by the source. (S1)
  • Both cases support ATX, microATX, Mini-ITX boards, GPUs up to 345 mm, CPU coolers up to 165 mm, and a 360 mm front radiator. (S1)

取自 key_takeaways (實際欄位,最多 3 筆)。事實與分析分別標示。

Zalman S6 Black and S6 V2 Black mid-towers land at $79.99: what it means for ATX builds — Semiconductor News news briefEditorial cover for a Semiconductor News brief. Chip motif; headline "Zalman S6 Black and S6 V2 Black mid-towers land at $79.99: what it means for ATX builds". Reported key numbers: 345 mm; 165 mm; 7. 1 cited source. A one-time entrance animation stops under reduced motion.SEMICONDUCTOR NEWS · NEWS BRIEFZalman S6 Black and S6 V2 Black mid-towersland at $79.99: what it means for ATX buildsREPORTED KEY NUMBERS345 mm165 mm71 sourceXAIPART
Cover image generated from data already shown on this page: the category motif, the headline, and reported key numbers. No decorative illustration; no third-party image.

您來自 AI 回答 — 這是可驗證的原始內容

AI 摘要可能遺漏了其主張的依據。原始預測、受影響零件及每一項引用皆在本頁,且均可追溯至其來源。

XAIPART 預測

本簡報包含可證偽的預測。

受影響零件

此報導無目錄相符項目 — 寧可不顯示,也不推斷相符。

Reported by TechPowerUp on . Summarized and analyzed by XAIPART Editorial.

What happened

Zalman has introduced two ATX mid-tower chassis, the S6 Black and the S6 V2 Black, sharing the same dimensions of 412 x 215 x 486 mm and identical core specifications.S1 The only meaningful difference between the two is that the V2 Black ships with two extra 120 mm RGB fans pre-installed at the top.S1

Both cases accept ATX, microATX, and Mini-ITX motherboards, expose seven PCIe slots, and clear up to 345 mm for graphics cards and up to 165 mm for tower-style CPU coolers.S1 Storage provisions include one 3.5-inch HDD bay, three 2.5-inch SSD bays, and one combo bay.S1 Cooling headroom reaches three 120/140 mm fans at the front, two 120/140 mm fans at the top, two 120 mm fans at the bottom, and one 120 mm fan at the rear.S1

The S6 Black is supplied with three fixed-RGB 140 mm front fans and one fixed-RGB 120 mm rear fan, while the S6 V2 Black adds two fixed-RGB 120 mm top fans to that bundle.S1 Radiator support tops out at 360 mm in front, 240 mm on top, and 120 mm at the rear.S1 Both chassis use a mesh front panel, a tempered glass side panel, a magnetic top dust filter, plus additional front and bottom filters, with 22 mm of clearance behind the motherboard tray for cable routing.S1 Front I/O comprises USB-C, one USB 3.0, two USB 2.0, HD audio, plus dedicated power and RGB buttons.S1

Key numbers
MetricReported valueSource
Case dimensions412 x 215 x 486 mm[S1]
Motherboard supportATX, microATX, Mini-ITX[S1]
GPU clearance345 mm[S1]
CPU cooler height165 mm[S1]
PCIe slots7[S1]
Front radiator max360 mm[S1]
S6 Black price$79.99 (Zalman USA)[S1]
S6 V2 Black priceNot disclosed[S1]

Background timeline

  1. No prior milestones disclosed by the source.

XAIPART take

Technical impact

On paper the S6 Black platform is genuinely mid-range, not entry-level: 345 mm GPU clearance covers every current triple-fan graphics card on the market, and 165 mm of CPU cooler headroom leaves room for most dual-tower air coolers, including Zalman's own CNPS lineup.S1 The 360 mm front-radiator allowance is the standout spec at this price tier, which is unusual for sub-$80 cases and worth verifying once a third-party teardown appears.

Market impact

At $79.99, the S6 Black is positioned against established $70-$90 mid-towers from Corsair, Cooler Master, and DeepCool, and Zalman's decision to pre-install fixed-RGB fans is a clear concession to the channel-builder audience that wants lighting out of the box.S1 Procurement teams sourcing enclosures for fixed-configuration builds should weigh whether the included RGB fans reduce BOM items versus a bare chassis; the V2 Black's premium is unconfirmed by the source, so a price quote from distribution is needed before cost-down comparisons.

Action

List the S6 Black and S6 V2 Black as candidates for ATX mid-tower BOM lines that currently use $80-$100 chassis with mandatory RGB fan add-ons. Confirm Zalman USA channel stock for the S6 Black before quoting, and request a distributor price for the S6 V2 Black rather than estimating from the $79.99 base, because the source does not state its official price.

XAIPART Forecast

XAIPART expects Zalman USA to publish an official S6 V2 Black price at or below $89.99 within 3 months of the S6 Black launch, i.e. by ; this forecast is wrong if the V2 Black lands above $89.99 or remains unpriced past that date, since the S6 Black already retails at $79.99 with a full fixed-RGB fan bundle.XAIPART analysis

Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. Uncertainty: the S6 V2 Black's official price is not disclosed, and Zalman USA channel availability beyond the listed page is not stated by the source.

Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.

替代品與生命週期

已建檔的替代品——目錄範圍,並非市場排名
零件關係生命週期依據
— 檔案中無替代品 需要資料 — 需要 match_type 在任何前代標籤出現之前

「前代」與「替代」標籤僅來自已記錄的相符類型、生命週期狀態或來源文字。未記錄相符項目時,不顯示任何標籤。我們自家的刊登內容不構成市場參考。

競爭格局

  • 24271 XAIPART 上此類別的有效刊登數
  • 111 代理製造商
  • 71 過去 30 天內我們新聞檔案中提及的製造商

計數僅反映 XAIPART 目錄,並非市場佔有率。

受影響零件

無目錄相符項目。 此消息未對應到 XAIPART 目前上架的任何零件。我們不會推測相符項目,也不會顯示佔位清單。

各維度成本壓力

Source: FRED · Generated · reference output z and composite are algorithm outputs, not a fetch snapshot

Cost pressure by dimension — composite stateDiverging bars for three dimensions around a zero midpoint. Input Cost has no reading; Supply Demand z -1.4711, notable; Fx Energy z 0.1754, neutral. Composite index -9.7, band neutral.0Input costno readingSupply/demandz −1.4711 · notable46 dFX & energyz +0.1754 · neutral5 dcomposite −9.7 · neutral−100 · −40 · −15 · 0 · +15 · +40 · +100
Underlying values — copyable for verification.
DimensionFRED series IDUnitLagAs of
Input costPCOPPUSDM, PALUMUSDM, PNICKUSDMUSD/mt52 d
Supply/demandPCU334413334413, IPG3344Sindex(1982=100) / index(2017=100)46 d
FX & energyDEXCHUS, DCOILBRENTEU, DHHNGSPrate / USD/bbl / USD/MMBtu5 d

No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.

本內容的產生方式

流程證據 — 擷取、來源合理性、模型與閘門
此簡報的稽核軌跡
Source fetched TechPowerUp · www.techpowerup.com · 2,856 chars · fetch status success
Source sanity (S1) ok — passed before any model call (no s1_ block recorded)
Model / prompt MiniMax-M3 · prompt Blog Agent - News Summary (v2.8-final) · 6,749 tokens · 30.6s · run completed
Gate verdict pass · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.054572 · C10 rounds 0
Time contract 2 <time datetime> values in this brief — 0 violations (+08:00 or date-only)

上述每一列皆由流程產生,並非人工撰寫。

編輯評分

確定性閘門結果 — 純 PHP,判定過程無模型參與
閘門評分明細 6 項適用檢查, 6通過: 100 百分比. No hold items or mandatory failures. Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.642. 適用檢查已通過 6 / 6 = 100% · 判定: pass No hold items or mandatory failures Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.642 是否發布由審核關卡決定。獨立稽核分數僅供參考。
發現錯誤? 告訴我們哪裡有誤 ——更正會與原文一同發布並記錄。我們不會默默修改文章。

留言

成為第一個留言的人。

來源

  1. Zalman Intros S6 Black ATX Mid-Tower Case Series — https://www.techpowerup.com/353437/zalman-intros-s6-black-atx-mid-tower-case-series · rss · 存取於

事實標記為 S1/S2,並可追溯至連結來源。標示為 分析 是 XAIPART 自身的推理,與報導事實分開保留。來源連結會被追蹤,而非 nofollow ——署名為刻意為之。