積體電路

子分類

📁 ADC/DAC 3,100+ 產品 📁 放大器 IC 1,900+ 產品 📁 音訊編解碼器 18 產品 📁 音訊 IC 2 產品 📁 時脈與計時 660+ 產品 📁 Comparator ICs 1 產品 📁 DSP 1,100+ 產品 📁 資料擷取 IC 2 產品 📁 數位電位器 4 產品 📁 顯示驅動器與控制器 1 產品 📁 FPGA 與 CPLD 7,300+ 產品 📁 介面 IC 3,300+ 產品 📁 LED 驅動器 1 產品 📁 邏輯 IC 460+ 產品 📁 記憶體 IC 870+ 產品 📁 微控制器 20,000+ 產品 📁 微處理器 4 產品 📁 馬達驅動器 1 產品 📁 其他 1 產品 📁 感測器與偵測器介面 1 產品 📁 特殊用途 IC 15 產品 📁 視訊 IC 14 產品

產品（39,000+)

PIC24EP128GP204-E/PT - 16-Bit 60 MIPS 128KB Flash MCU | Microchip
PIC24EP128GP204-E/PT

PIC24EP128GP204-E/PT - 16-Bit 60 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24EP128GP204-E/PT is a 16-bit microcontroller from the PIC24E general-purpose family, delivering up to 60 MIPS of performance from a 70 MIPS capable core, with 128 KB (43K x 24) of Flash program store and 16 KB of SRAM, housed in a 44-pin TQFP (10x10 mm) package. The -E suffix indicates the extended industrial temperature grade, enabling operation from -40C to +125C for harsh-environment designs. The PIC24EP core integrates a rich analog and digital peripheral set including operational amplifiers, comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for program, SRAM for data, EEPROM for non-volatile data), and a configurable set of peripherals on one die. The PIC24EP family sits within the 16-bit Digital Signal Controller (DSC) class, which adds hardware multiply, hardware divide, DSP-oriented instructions, and deterministic interrupt latency on top of standard MCU architecture. This category is best understood in the hierarchy: microcontroller -> 16-bit MCU/DSC -> PIC24E family -> power-managed general-purpose MCU with integrated op-amps. Key features include 60 MIPS core performance, 128 KB self-programmable Flash with ECC, 16 KB SRAM, a 10/12-bit ADC with up to 1 MSPS conversion rate, multiple UART/SPI/I2C interfaces, and four 16-bit timers. The integrated op-amps and comparators reduce external analog component count for signal conditioning, while the Peripheral Trigger Generator enables timed, low-CPU-overhead sequencing of ADC conversions and PWM edges. The CTMU supports capacitive touch sensing and precise time-of-flight measurement. Architecturally, the PIC24EP uses a modified Harvard architecture with separate buses for instruction and data fetch, a 24-bit instruction word, and a 16-bit data path. This combination yields high code density per MHz and deterministic interrupt response, while the on-chip op-amps are trimmed at factory test to reduce offset and drift. The device operates from 3.0V to 3.6V and includes multiple power-management modes for battery-friendly standby operation. Typical applications include industrial control, motor drive signal conditioning, power-conversion feedback loops, sensor interfaces, automotive body and sensor ECUs (when used as the non-automotive qualified sibling), and consumer appliances that benefit from integrated analog. The -E temperature grade broadens its reach to outdoor industrial, automotive cabin electronics, and lighting control. Design consideration: route the analog supply (AVDD) and ground (AVSS) with separate traces from their digital counterparts, place the 10 uF + 0.1 uF decoupling pair within 5 mm of VDD, and consult the family reference manual for PTG timing diagrams when chaining peripheral events. This page consolidates distributor pricing, drop-in package equivalents, and design guidance not available on the manufacturer's parametric summary page.

詢價 聯絡我們
PIC24EP128GP204-E/TL - 16-bit 70 MIPS MCU, 128KB Flash | Microchip
PIC24EP128GP204-E/TL

PIC24EP128GP204-E/TL - 16-bit 70 MIPS MCU, 128KB Flash | Microchip

The Microchip PIC24EP128GP204-E/TL is a 16-bit microcontroller from the PIC24EP family, featuring a 70 MIPS high-performance core, 128 KB of Flash program memory, 16 KB of RAM, and a 44-pin VTLA (6x6 mm) exposed-pad surface-mount package. It operates from a 3.0V to 3.6V supply and is qualified to the AEC-Q100 automotive standard, making it suitable for safety-critical and harsh-environment designs. The -E temperature grade extends the operating range to -40C to +125C, supporting under-hood and industrial deployments. A 16-bit microcontroller (MCU) is a programmable processor that integrates a CPU core, volatile and non-volatile memory, and a rich set of peripherals (ADC, timers, communication interfaces) into a single chip. PIC24E-series MCUs occupy the mid-performance tier of Microchip's dsPIC/PIC24 lineup, sitting between 8-bit PIC MCUs and the higher-end dsPIC33 digital signal controllers, optimized for code density, deterministic interrupt response, and advanced analog integration. Key differentiating features include a 10/12-bit ADC with up to 1.1 Msps conversion rate, up to four on-chip operational amplifiers (Op Amps), a Charge Time Measurement Unit (CTMU) for capacitive touch and accurate time measurement, a Peripheral Trigger Generator (PTG) for hardware-state-machine automation, and four standard 16-bit timers. Communication peripherals cover up to two UART, two SPI, and two I2C interfaces, plus a Parallel Master Port for external memory expansion. Architecturally, the PIC24E core uses a modified Harvard architecture with 16-bit data paths, a 24-bit instruction word, and a 16x16 hardware multiplier that sustains the 70 MIPS throughput at 70 MHz CPU clock. The integrated Op Amps are routed to dedicated ADC channels, eliminating external signal conditioning in motor-control and sensor-interface designs. Typical uses include automotive body and chassis modules, industrial motor control, sensor signal conditioning, and low-cost DSP-adjacent applications such as digital filtering and PID control loops. Designers choose the -E/TL grade specifically when AEC-Q100 qualification and the compact VTLA-44 package are required for space-constrained or automotive-grade layouts. When designing with this device, allocate sufficient PCB copper beneath the exposed thermal pad (EP) to meet the package's thermal resistance specifications, and confirm the supply voltage stays within the 3.0V to 3.6V window; dropouts below 3.0V will trigger the brown-out reset. The Peripheral Trigger Generator (PTG) is often overlooked and can offload complex sequencing from the CPU, freeing MIPS for application logic. This page synthesizes distributor pricing for the PIC24EP128GP204-E/TL, parametric drop-in alternatives within the VTLA-44 footprint, and practical design notes not consolidated in the manufacturer datasheet.

詢價 聯絡我們
PIC24EP128GP204-H/ML - 70 MIPS 16-bit MCU, 128KB Flash, AEC-Q100 | Microchip
PIC24EP128GP204-H/ML

PIC24EP128GP204-H/ML - 70 MIPS 16-bit MCU, 128KB Flash, AEC-Q100 | Microchip

The Microchip PIC24EP128GP204-H/ML is a high-performance 16-bit microcontroller from the PIC24EP family, featuring a 70 MIPS CPU core, 128 KB of Flash program memory, 16 KB of SRAM, and integrated analog peripherals. It operates at up to 60 MHz (with 70 MIPS throughput) and is housed in a 44-pin VQFN (ML) package with exposed thermal pad. What is a PIC24EP microcontroller? The PIC24EP is Microchip's high-performance 16-bit DSC (Digital Signal Controller) family that combines MCU control capabilities with DSP-grade throughput. The 'EP' suffix denotes enhanced peripherals: dual 10/12-bit ADCs at up to 1.1 Msps, on-chip op-amps, CTMU (Charge Time Measurement Unit) for capacitive touch, a Peripheral Trigger Generator (PTG), and High-Speed PWM with 7 ns resolution. The PIC24EP sits above PIC24FJ in the taxonomy: PIC24EP128GP204 -> PIC24EP -> PIC24 -> 16-bit MCU -> microcontroller -> embedded IC -> semiconductor. Key features of this part include 70 MIPS core performance, 128 KB Flash (43K x 24 words), 16 KB SRAM, up to 35 analog-capable I/O pins, and an AEC-Q100 qualification for automotive applications. The '-H' suffix indicates the High-temperature automotive grade (-40C to +150C ambient), and '/ML' designates the 44-pin VQFN surface-mount package. Integrated peripherals include USB, CAN, and multiple UART/SPI/I2C interfaces. Technical depth: the dsPIC/PIC24EP core uses a modified Harvard architecture with a 24-bit instruction word and 16-bit data path. The PTG sequencer offloads real-time tasks from the CPU, allowing deterministic peripheral chaining without interrupt overhead. Dual 10-bit ADCs sample at up to 1.1 Msps each, enabling simultaneous motor-current and back-EMF measurement for sensorless BLDC control. On-chip op-amps buffer analog signals before ADC conversion, eliminating external amplifier cost and noise pickup. Typical applications include automotive body electronics and sensor conditioning, BLDC/PMSM motor control, industrial PLC analog front-ends, capacitive touch HMI interfaces, and low-latency digital power conversion. The integrated PTG and op-amps allow fully-deterministic sensor acquisition loops without CPU intervention. Design consideration: the 44-pin VQFN exposed pad must be soldered to a sufficiently large copper pour (minimum ~1 sq inch) to keep junction temperature within the -40C to +150C automotive range under maximum CPU activity. This page synthesizes distributor pricing, drop-in Microchip alternates, and automotive-grade design considerations not collected on a single manufacturer page.

詢價 聯絡我們
PIC24EP128GP204-I/PT - 16-Bit 70 MIPS 128KB Flash MCU | Microchip
PIC24EP128GP204-I/PT

PIC24EP128GP204-I/PT - 16-Bit 70 MIPS 128KB Flash MCU | Microchip

The Microchip PIC24EP128GP204-I/PT is a high-performance 16-bit microcontroller from the PIC24E general-purpose family, featuring a 70 MIPS CPU core, 128 KB of Flash program memory, and 16 KB of SRAM in a 44-pin TQFP (10x10 mm) package. The device integrates dual op-amps, advanced 10-bit ADC modules running up to 1.1 Msps, CTMU touch peripherals, and a Peripheral Trigger Generator (PTG) for hardware state-machine I/O control. Operating from 3.0V to 3.6V with an industrial -40C to +85C temperature range, it targets high-end general-purpose embedded designs that need DSP-class throughput on a single 3.3V rail. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a configurable set of peripherals (ADC, timers, communication, I/O) on a single silicon die. In the system hierarchy it sits below power management ICs and above discrete logic: a complete embedded design typically pairs an MCU with an LDO, a crystal oscillator, and driver ICs. The PIC24E family specifically occupies the mid-performance tier within Microchip's 16-bit MCU roadmap - more capable than PIC24F but below the dsPIC33 DSC family - making it a workhorse for motor control, digital power, and signal-conditioning applications. Key features include 128 KB Flash (43K x 24 words), 16 KB SRAM, 70 MIPS CPU throughput at 60 MHz (Fosc = 240 MHz with PLL), four UART/SPI/I2C modules, two I2C modules, five 16-bit timers, and 35 digital I/O pins. The integrated op-amps can be used for active signal conditioning ahead of the ADC, eliminating external analog components. The CTMU enables capacitive touch sensing and precise time-based current measurement. Architecturally, the PIC24E uses a 16-bit modified Harvard core with a 24-bit instruction word for improved code density, 31 working registers, and a hardware multiplier/DIV unit. The 70 MIPS sustained throughput is competitive with Cortex-M3 devices in its class while offering Microchip's mature MPLAB X toolchain ecosystem and DSP library support. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital switching power conversion (digital PFC, LLC controllers), sensor signal conditioning, LED lighting controllers, and medical instrumentation front-ends. The PTG peripheral is particularly valued in multi-loop digital power supplies where deterministic hardware sequencing reduces firmware overhead. When designing with this part, allow at least 1 square inch of ground plane under the TQFP for thermal dissipation, and route the analog AVss/AVdd pair as a star away from noisy digital returns. The 44-pin TQFP leaves most peripherals accessible without pin-sharing tradeoffs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
PIC24EP128GP204T-E/ML - 16-bit 60MIPS MCU 128KB Flash | Microchip
PIC24EP128GP204T-E/ML

PIC24EP128GP204T-E/ML - 16-bit 60MIPS MCU 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP204T-E/ML is a high-performance 16-bit microcontroller from the PIC® 24EP family, featuring a 60 MIPS PIC Harvard core, 128 KB (43K x 24) of Flash program memory and a 44-pin QFN EP (8x8 mm) exposed-pad package with automotive AEC-Q100 qualification. Operating from a 3.0 V to 3.6 V supply, it integrates a Peripheral Trigger Generator (PTG), Charge Time Measurement Unit (CTMU), on-chip op-amps, and a 10/12-bit ADC with superior analog performance for mixed-signal designs. A PIC24E 16-bit microcontroller is a member of Microchip's enhanced PIC24 family, which sits above the PIC16 and PIC18 8-bit lines and below the dsPIC33/PIC32 MIPS-class devices in the broader Microchip MCU hierarchy (8-bit MCU -> 16-bit MCU -> 32-bit MCU). The 'EP' suffix designates the high-speed 70 MIPS-capable core variant with DSP instructions, advanced peripherals, and extended memory addressing, while the 'T-E/ML' suffix indicates tape-and-reel packaging, the extended (-40C to +125C) automotive temperature grade, and the 44-pin QFN package. Key features of the PIC24EP128GP204T-E/ML include up to 60 MIPS core throughput, 128 KB self-programmable Flash with ECC, 8 KB SRAM, 4 KB EEPROM (family-typical), multiple communication peripherals (I2C, SPI, UART with IrDA/LINbus support), and a high-resolution PWM module. The CTMU enables capacitive touch sensing and precise time measurement, while the integrated op-amps simplify analog front-end designs and reduce BOM count. Architecturally, the device uses a Harvard bus with separate program and data paths, a hardware multiply/divide engine, and tightly-coupled peripheral trigger logic (PTG) that allows peripherals to chain events without CPU intervention, freeing the core for application-level processing. This combination is well suited to closed-loop control, motor drive, and high-end general-purpose embedded designs. Typical applications include automotive body electronics, industrial motor control, digital power conversion, capacitive touch HMIs, sensor signal conditioning, and high-performance sensor hubs. The AEC-Q100 qualification makes it attractive for under-hood and body-control ECUs. A primary design consideration when using this device is the 3.3 V-only supply range, which requires level shifting when interfacing to 5 V peripherals. Additionally, the 44-QFN exposed-pad must be soldered to a sufficient copper pour on the PCB for thermal dissipation and electrical grounding. This page synthesizes distributor pricing, drop-in alternative listings and practical design notes drawn from Microchip documentation and authorized distributor data, offering engineers a single-source reference not available in the bare datasheet.

詢價 聯絡我們
PIC24EP128GP204T-E/PT - 16-Bit 60MIPs 128KB Flash MCU | Microchip
PIC24EP128GP204T-E/PT

PIC24EP128GP204T-E/PT - 16-Bit 60MIPs 128KB Flash MCU | Microchip

The Microchip Technology PIC24EP128GP204T-E/PT is a 16-bit PIC microcontroller from the PIC24E general-purpose family, operating at up to 60 MIPS core speed and housed in a 44-pin TQFP (10x10 mm) package. The device integrates 128 KB (43K x 24) of Flash program memory and 16 KB of RAM, with on-chip peripherals including high-speed PWM, operational amplifiers, comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG). What is a PIC24E MCU? The PIC24E is Microchip's high-performance 16-bit dsPIC/PIC24 microcontroller family built on a modified Harvard architecture. It sits within the broader taxonomy of MCU -> 16-bit MCU -> PIC24 family -> general-purpose MCU with DSP extensions. These MCUs combine deterministic interrupt response with enhanced arithmetic capability for motor control, power conversion, and signal processing. Key features include 60 MIPS performance from a 3.0V to 3.6V supply, AEC-Q100 automotive qualification, and rich connectivity through I2C, SPI, UART/USART, IrDA, and LINbus interfaces. The T suffix in the part number indicates tape-and-reel packaging, while the E grade indicates the -40C to +125C extended automotive temperature range. The PTG peripheral enables complex timing and sequencing without CPU intervention. Typical applications include automotive body and chassis ECUs, industrial motor control, sensor signal conditioning with on-chip op-amps, LED lighting controllers, and consumer appliances requiring robust connectivity. The high-speed 10/12-bit ADC and op-amp integration make the PIC24EP128GP204 well-suited for closed-loop analog control. When designing with this part, ensure your compiler is configured for the PIC24E instruction set and that the ICD 3 / ICD 4 / PICkit 4 debugger is selected. Verify the supply decoupling network meets the 100 nF + bulk capacitor recommendation in the datasheet. This page synthesizes distributor pricing, AEC-Q100 cross-brand drop-in alternatives, and practical design notes not found on stock product listings.

詢價 聯絡我們
PIC24EP128GP204T-E/TL - 16-Bit 70MIPS MCU 128KB Flash | Microchip
PIC24EP128GP204T-E/TL

PIC24EP128GP204T-E/TL - 16-Bit 70MIPS MCU 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP204T-E/TL is a 16-bit microcontroller from the PIC24EP general-purpose MCU family, delivering up to 70 MIPS of CPU performance from a high-speed modified Harvard architecture core. The device integrates 128 KB of Flash program memory (43K x 24 words) and 16 KB of SRAM in a 44-pin VTLA (6x6 mm) surface-mount package with exposed thermal pad. It operates across the 3.0V to 3.6V industrial supply range at temperatures from -40C to +125C and is AEC-Q100 qualified for harsh-environment and automotive applications. What is a 16-bit MCU? A 16-bit microcontroller is an embedded computing device with a 16-bit data path, 16-bit-wide registers, and a unified address space that gives it a middle position between 8-bit MCUs (lower cost, simpler peripherals) and 32-bit MCUs (higher performance, richer ecosystems). In the broader taxonomy, the PIC24EP128GP204T-E/TL belongs to microcontroller -> 16-bit MCU -> PIC24E family -> DSP-enhanced general-purpose MCU -> Microchip's dsPIC/PIC24 line of embedded controllers. Key differentiating features include a 12-bit ADC with up to 1 Msps conversion rate, two on-chip operational amplifiers (suitable for signal conditioning), a Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, and a Peripheral Trigger Generator (PTG) that orchestrates complex peripheral sequencing without CPU intervention. The PTG is uncommon in 16-bit MCUs and lets hardware timers trigger ADC conversions, PWM updates, and GPIO events deterministically. The architecture exposes a 16-element DSP engine, dual-port RAM-style working registers, and a hardware multiplier, supporting single-cycle MAC operations. The result is 70 MIPS with deterministic interrupt latency suitable for digital filtering, motor commutation, and power-conversion control loops. Typical applications include automotive body and chassis ECUs, industrial sensor conditioning with on-chip op-amps, BLDC/PMSM motor control, LED lighting drivers with closed-loop current sensing, and AEC-Q100-grade safety peripherals. The on-chip op-amps eliminate external instrumentation stages for thermocouple, photodiode, and current-shunt circuits. When designing with this part, note that the VTLA-44 (6x6 mm) package has a small thermal pad that must be soldered to a PCB copper pour for thermal and electrical performance. Code development is supported by MPLAB X IDE and the XC16 compiler, with extensive peripheral libraries. This page synthesizes verified distributor pricing, AEC-Q100 cross-brand drop-in alternatives in the same VTLA-44 package, and design notes that go beyond the manufacturer datasheet.

詢價 聯絡我們
PIC24EP128GP204T-I/ML - 70 MIPS 16-bit MCU 128KB Flash 44-QFN | Microchip
PIC24EP128GP204T-I/ML

PIC24EP128GP204T-I/ML - 70 MIPS 16-bit MCU 128KB Flash 44-QFN | Microchip

The Microchip Technology PIC24EP128GP204T-I/ML is a 16-bit microcontroller from the PIC24EP family, integrating a high-performance 70 MIPS dsPIC33/PIC24E core with 128 KB Flash program memory and 16 KB RAM in a 44-pin QFN (8x8 mm) package with exposed thermal pad. The “T” suffix denotes tape-and-reel packaging and the “I” suffix specifies the industrial -40C to +85C temperature range; the “/ML” suffix identifies the 44-QFN package. A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals (timers, ADC, communication interfaces, GPIO). The PIC24EP family sits in Microchip’s high-performance 16-bit MCU tier, sitting between the 8-bit PIC18 family and the 32-bit PIC32MX/dsPIC33 family. The PIC24E core uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction set, optimized for both C code density and deterministic real-time DSP-style signal processing. Key features include 128 KB (43K x 24 instructions) Flash with self-programming, 16 KB SRAM, up to 35 I/O, two 12-bit ADCs with 500 ksps performance (shared 10-channel input mux), three op-amps, one CTMU (Charge Time Measurement Unit) for capacitive touch or precise time measurement, and one PTG (Peripheral Trigger Generator) that offloads complex timing sequences from the CPU. Communication peripherals include up to two UART, two SPI, and one I2C. The peripheral set is tailored to mixed-signal and motor-control front ends. Architecturally, the PIC24E core delivers 70 MIPS at 70 MHz CPU clock from a 3.0-3.6 V supply, with a hardware multiplier and zero-overhead looping for high-throughput DSP-like math. The dual 12-bit ADC and integrated op-amps remove the need for external signal-conditioning ICs in many sensor and motor-control designs, while the CTMU/PTG combination enables precise event sequencing. Typical applications include industrial motor control (BLDC/PMSM FOC), digital power conversion, advanced sensor signal conditioning, capacitive-touch user interfaces, and general-purpose embedded control with on-chip analog. The wide operating voltage (3.0-3.6 V) and industrial temperature range suit industrial, appliance, and consumer embedded designs. When designing with the PIC24EP128GP204T-I/ML, ensure the exposed thermal pad (EP) is soldered to a continuous ground copper pour for both thermal dissipation and low-impedance ground return. Decouple VDD/AVDD pairs with 0.1 uF and 1 uF ceramics placed within 5 mm of the pins, and reserve one GPIO for an SWD/ICSP programming header (PGECx/PGEDx). This page synthesizes distributor pricing, drop-in alternatives drawn from the Microchip same-family portfolio, and practical design notes not found on standard distributor listings.

詢價 聯絡我們
PIC24EP128GP204T-I/TL - 16-bit 70MIPS MCU 128KB Flash | Microchip
PIC24EP128GP204T-I/TL

PIC24EP128GP204T-I/TL - 16-bit 70MIPS MCU 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP204T-I/TL is a 16-bit PIC microcontroller from the PIC24EP "Enhanced Performance" family, delivering up to 70 MIPS core performance with 128 KB of Flash and 16 KB of SRAM in a 44-pin VTLA (6x6 mm) surface-mount package. The PIC24EP "GP" general-purpose sub-family integrates advanced analog peripherals including operational amplifiers, comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG) for hardware-state-machine automation. A 16-bit microcontroller (MCU) is a microprocessor with internal Flash, RAM, and peripherals optimized for embedded control. The PIC24EP family sits within Microchip's dsPIC/PIC24 product hierarchy: 16-bit MCU -> dsPIC/PIC24 family -> PIC24EP "Enhanced Performance" sub-family -> general-purpose (GP) class. This taxonomy places the PIC24EP128GP204 as a mid-range 16-bit MCU with high analog integration, sitting between cost-optimized PIC24FJ parts and the high-performance dsPIC33EP digital signal controllers. Key differentiating specifications include 70 MIPS CPU throughput (4.7 µs instruction cycle latency for fast deterministic control loops), 128 KB self-programmable Flash with EEPROM emulation, 16 KB SRAM, dual 10-bit DACs, three op-amps internal to the die, four analog comparators, and a 12-bit ADC with up to 500 ksps conversion rate. The CTMU enables capacitive touch sensing and precision time measurement down to nanosecond resolution. Architecturally, the PIC24EP core uses a modified Harvard architecture with a 24-bit instruction word and 16-bit data path, enabling C-compiler-friendly operation with the MPLAB XC16 toolchain. The integrated PTG module allows complex peripheral sequencing without CPU intervention, reducing firmware complexity for motor control and power-conversion feedback loops. The on-chip op-amps and comparators can directly condition sensor signals before ADC digitization, eliminating external signal-conditioning components in many designs. Typical applications include industrial motor control (BLDC, PMSM, stepper drives), digital power conversion (PFC, LLC, full-bridge converters), high-end LED lighting drivers, capacitive-touch user interfaces, sensor conditioning for IoT edge nodes, and medical instrumentation requiring precision analog front ends. The wide operating temperature range (-40 °C to +85 °C industrial grade) and 3.3 V single-supply operation make the part well suited for industrial 24V-bus-derived power architectures. Design consideration: the VTLA-44 (6x6 mm) package has an exposed thermal pad that must be soldered to a copper pour on the PCB (minimum 1 square inch recommended) for thermal dissipation and electrical grounding. Decoupling requires at minimum one 100 nF X7R capacitor within 3 mm of each VDD/AVDD pin pair. For applications requiring >40 MIPS sustained throughput, ensure code execution stays within Flash wait-state timing by referencing the MPLAB XC16 compiler optimization settings. This page synthesizes distributor pricing, drop-in Microchip family alternatives, and practical design notes not found in the bare manufacturer datasheet, enabling faster component selection and BOM risk mitigation for engineers evaluating the PIC24EP128GP204T-I/TL for new designs.

詢價 聯絡我們
PIC24EP128GP206-E/MR - 16-Bit MCU, 128KB Flash, 60 MIPS | Microchip
PIC24EP128GP206-E/MR

PIC24EP128GP206-E/MR - 16-Bit MCU, 128KB Flash, 60 MIPS | Microchip

The Microchip Technology PIC24EP128GP206-E/MR is a 16-bit microcontroller from the PIC24EP general-purpose family, featuring 128KB of Flash program memory, 16KB of RAM, and a 60 MIPS (70 MHz) high-performance CPU core with DSP instructions, housed in a 64-pin VQFN (MR) 9x9 mm package with exposed thermal pad. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM), and programmable peripherals on one die. Within the broader taxonomy, MCUs belong to the class of embedded processors, which also includes microprocessors (MPUs) and DSPs. The PIC24E/PIC24EP family sits between 8-bit PIC MCUs and the 32-bit PIC32MX/ARM Cortex-M devices in Microchip's portfolio, and is intended for high-end general-purpose applications that need DSP-class signal-processing throughput without paying for a 32-bit core. The "EP" enhancement adds 70 MIPS core speed, a 12-bit ADC with up to 16 channels, op-amps, comparators, CTMU, and the Peripheral Trigger Generator (PTG) for hardware event sequencing. Key features include a 16-bit modified Harvard architecture with a 16x16 hardware multiplier, 32-bit accumulator, and single-cycle MAC operation; up to 53 general-purpose I/O pins; multiple communication peripherals (UART, SPI, I2C, ECAN); and 5 PWM output channels with 16-bit resolution. The 12-bit 1.1 MSPS ADC with up to 16 analog inputs supports precision mixed-signal designs, while four on-chip op-amps and three comparators enable direct sensor signal conditioning. The device is fabricated on a CMOS process that delivers 70 MIPS at 3.3 V while preserving deterministic interrupt latency suitable for real-time control loops. The integrated PTG timer chain allows peripherals to trigger each other in hardware, offloading CPU cycles in motor-control and power-conversion firmware. The dual-watchdog timer and code protection further harden the design for unattended industrial deployments. Typical applications include industrial motor control (BLDC/PMSM FOC), digital power conversion (DC-DC, PFC, LLC), advanced sensor conditioning, solar inverters, LED lighting controllers, and AEC-Q100 automotive body/comfort modules. The wide operating temperature range of -40C to +125C (E suffix) supports both industrial and automotive under-hood environments. When designing with this part, ensure the ICSP programming header is accessible on the PCB because the exposed thermal pad (EP) under the 64-VQFN must be soldered to a sufficient copper pour to meet the 31 C/W theta_JA thermal budget at full CPU load. This page synthesizes distributor stock and lead-time, drop-in alternative candidates from the same PIC24EP family and cross-brand 32-bit MCU equivalents, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
PIC24EP128GP206-H/MR - 16-bit 70 MIPS MCU 128KB Flash 64-pin VQFN | Microchip
PIC24EP128GP206-H/MR

PIC24EP128GP206-H/MR - 16-bit 70 MIPS MCU 128KB Flash 64-pin VQFN | Microchip

The Microchip Technology PIC24EP128GP206-H/MR is a high-performance 16-bit microcontroller from the PIC24E general-purpose family, delivering 70 MIPS core performance with 128 KB of Flash program memory and housed in a 64-pin VQFN (MR) package. It features the dsPIC/PIC24E enhanced CPU core with excellent performance and code density, plus 16 KB of on-chip RAM, a 12-bit ADC with up to 1.1 Msps conversion rate, and advanced analog peripherals including on-chip op-amps and a Charge Time Measurement Unit (CTMU). What is a PIC24E general-purpose microcontroller? The PIC24E family sits in the 16-bit MCU segment of Microchip's product hierarchy (16-bit MCU -> microcontroller -> embedded computing -> semiconductor), offering a 16-bit modified Harvard architecture with DSP-oriented instructions. The 'E' series pushes performance to 70 MIPS (versus 16 MIPS on the older PIC24F), while preserving the deterministic interrupt model and rich peripheral set that makes PIC microcontrollers a workhorse for real-time embedded designs. The /MR suffix indicates a 64-pin VQFN package, the /H suffix denotes an extended temperature grade (-40C to +150C), and the -GP variant targets general-purpose applications without on-chip DSC (digital signal controller) features. Key features of the PIC24EP128GP206-H/MR include a 70 MIPS CPU core with single-cycle 16x16 MAC, dual 36/40/48 KB Flash options in the family, 10-bit/12-bit ADC with multiple conversion modes, up to 53 general-purpose I/O pins, multiple communication peripherals (UART, SPI, I2C), enhanced PWM with up to 9 channels, Peripheral Trigger Generator (PTG) for complex timing, and a CTMU for capacitive touch and time measurement. The 64-pin VQFN package provides a compact 9x9 mm footprint with an exposed thermal pad that lowers thermal resistance for high-MIPS continuous operation. Typical applications include industrial motor control and variable-frequency drives, advanced sensor signal conditioning, LED lighting controllers, UPS and power conversion, automotive body and chassis subsystems (with proper qualification), digital power conversion, and high-performance consumer appliances. The 70 MIPS performance and DSP instructions also support audio processing and real-time control loops where deterministic execution is critical. When designing with the PIC24EP128GP206-H/MR, observe the -40C to +150C extended operating temperature, which requires PCB layout that ensures the exposed pad is soldered for proper heat dissipation. The device supports 3.0V to 3.6V single-supply operation; pair the MCU with a low-noise LDO such as the MCP1700 or TPS7A4700 family and decouple every VDD/AVDD pair with 100 nF ceramic capacitors placed within 3 mm of the pins. The H/MR suffix combination indicates a specialized extended-temperature part; verify lead time through authorized distributors before committing to production schedules.

詢價 聯絡我們
PIC24EP128GP206-H/PT - 16-bit 70 MIPS 128KB Flash MCU | Microchip
PIC24EP128GP206-H/PT

PIC24EP128GP206-H/PT - 16-bit 70 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24EP128GP206-H/PT is a 16-bit microcontroller from the PIC24E general-purpose family, featuring a 70 MIPS core, 128 KB flash, 16 KB RAM, and a 64-pin TQFP package. The device operates from a 3.0 V to 3.6 V supply, integrates three on-chip op amps, four comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG), making it suitable for high-end general-purpose applications. AEC-Q100 qualification of the -H temperature grade (-40 °C to +150 °C) qualifies the part for automotive deployment. A 16-bit MCU (microcontroller) is a single-chip computer that integrates a CPU, program memory (flash), data memory (RAM), and peripherals on one silicon die. Within the broader taxonomy, a 16-bit MCU sits between 8-bit MCUs (PIC10/12/16) and 32-bit MCUs (PIC32, ARM Cortex-M) and is widely used where 8-bit performance is insufficient but 32-bit cost or power is unjustified. The PIC24E family uses a modified Harvard architecture with a 16-bit data path and 24-bit instructions, optimizing code density. Key features of the PIC24EP128GP206 include a 70 MIPS CPU speed at 70 MHz, 128 KB flash (43 K x 24 words), 16 KB SRAM, and advanced peripherals such as a 12-bit ADC with 500 ksps conversion rate, three op amps with programmable gain, and four high-speed comparators. The CTMU enables precise time measurement for capacitive touch and general-purpose timing, while the Peripheral Trigger Generator sequences peripheral events without CPU intervention. CAN, SPI, I²C, and UART interfaces support communication with external sensors and actuators. Typical applications include automotive body controllers, industrial sensor interfaces, motor control signal conditioning, and high-precision measurement systems. The integration of op amps and comparators on-die reduces BOM count and PCB area in mixed-signal designs. Compared with PIC24F devices, the PIC24E family offers higher MIPS throughput at the same MHz, allowing lower clock frequencies to meet the same performance budget, which reduces EMI. When designing with this device, ensure the 3.3 V rail is tightly regulated; ripple above 100 mV can induce ADC errors. Place decoupling capacitors (0.1 µF + 10 µF) within 5 mm of each VDD/VSS pair. The PTG should be programmed to offload timed events from the main loop, freeing CPU bandwidth for application logic. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing an engineer-ready reference that complements Microchip's official documentation.

詢價 聯絡我們
PIC24EP128GP206T-E/MR - 16-bit 60 MIPS MCU, 128KB Flash | Microchip
PIC24EP128GP206T-E/MR

PIC24EP128GP206T-E/MR - 16-bit 60 MIPS MCU, 128KB Flash | Microchip

The Microchip Technology PIC24EP128GP206T-E/MR is a 16-bit PIC24EP series microcontroller with a 60 MIPS CPU core, 128 KB of Flash program memory organized as 43K x 24, and 8 KB of SRAM, housed in a 64-pin VQFN (MR) 9x9 mm package with exposed thermal pad. It is part of the PIC24E "GP" general-purpose family, designed for high-performance mixed-signal embedded designs that need an automotive-grade temperature range (-40C to +125C) plus AEC-Q100 qualification. What is a PIC24E microcontroller? The PIC24E is Microchip's 16-bit dsPIC/PIC MCU family built on a modified Harvard architecture with a wide 24-bit instruction word and 16-bit data path. It sits in the hierarchy: PIC24E -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. Compared with PIC24F parts, PIC24E adds higher MIPS (up to 70), more DMA channels, more advanced analog peripherals (CTMU, op amps, PTG), and faster ADC conversion. Key features include 128 KB Flash (43K x 24 organization) for code storage, 8 KB SRAM, and a rich peripheral set: DMA controller, PWM, WDT, POR/BOR, peripheral trigger generator (PTG), charge time measurement unit (CTMU), and on-chip operational amplifiers. The 60 MIPS core delivers deterministic real-time response, while the 64-pin VQFN (9x9) package with EP provides good thermal dissipation for automotive environments. Architecturally, the PIC24EP128GP206 uses a modified Harvard bus with separate program and data paths, allowing simultaneous fetch + access. The 16-bit core executes most instructions in one cycle, giving 60 MIPS at 60 MHz FOSC. Integrated op amps and CTMU let designers implement touch sensing, signal conditioning, and slope-compensation without external analog ICs. Typical applications include automotive body and chassis ECUs, industrial motor control and sensor conditioning, digital power conversion (SMPS), LED lighting controllers, and consumer/medical devices that need AEC-Q100 reliability in a compact 64-pin QFN. Design consideration: the E/MR suffix indicates the extended (-40C to +125C) automotive temperature grade and Tape-and-Reel packaging; plan the land pattern for the 9x9 mm VQFN with a properly sized thermal pad tied to ground. This page consolidates parametric data, drop-in alternatives, and engineering guidance beyond what the bare datasheet provides.

詢價 聯絡我們
PIC24EP128GP206T-I/PT - 16-bit 70 MIPS 128KB Flash MCU | Microchip
PIC24EP128GP206T-I/PT

PIC24EP128GP206T-I/PT - 16-bit 70 MIPS 128KB Flash MCU | Microchip

The Microchip PIC24EP128GP206T-I/PT is a 16-bit microcontroller from the PIC24E general-purpose family, delivering 70 MIPS CPU performance from a 128 KB (43K x 24) Flash program memory and 16 KB SRAM, housed in a 64-pin TQFP (PT) package. It is specified for an industrial temperature range (-40C to +85C) and runs from a single 3.0V to 3.6V supply. The on-chip peripherals include high-performance ADC, op amps, CTMU, and a Peripheral Trigger Generator (PTG) targeting general-purpose embedded designs. A 16-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU, Flash program memory, SRAM, and peripherals on one die. The PIC24E family uses a Harvard architecture with a 16-bit data path and DSP-friendly instructions, sitting in the hierarchy: microcontroller -> embedded IC -> integrated circuit -> semiconductor. Compared with 8-bit MCUs, 16-bit parts offer higher throughput, more precise ADC math, and richer DSP capability, while remaining lower-cost and lower-power than 32-bit Cortex-M parts. Key features of the PIC24EP128GP206T-I/PT include 128 KB Flash, 16 KB SRAM, up to 53 general-purpose I/O, USB 2.0 full-speed On-The-Go, multiple UART/SPI/I2C interfaces, five 16-bit timers, and a 10/12-bit ADC with up to 1 Msps sampling. The CTMU allows capacitive touch sensing, while two on-chip op amps and a PTG engine reduce external component count and let designers orchestrate complex peripheral sequences without CPU intervention. The architecture is a modified Harvard CPU with a 24-bit instruction word, 16-bit data path, and a hardware MAC/DSP engine, giving the device a sustained throughput of 70 MIPS at 70 MHz CPU clock. This makes it well-suited to digital signal processing, motor control loops, and high-speed data acquisition where deterministic latency is required. Typical applications include industrial control and HMI, USB peripherals, motor and power-conversion control, capacitive touch user interfaces, medical instrumentation, and portable data loggers. The wide operating voltage and rich analog make it a strong fit for sensor conditioning and mixed-signal front ends. When designing with this part, reserve one I/O for the in-circuit serial programming (ICSP) interface so firmware can be updated on the board. Decouple VDD/VSS close to the package with 100 nF plus bulk capacitance, and follow Microchip's reference designs for USB impedance and trace routing. This page synthesizes distributor stock, drop-in alternative MPNs, and applied design notes beyond what the manufacturer datasheet alone provides.

詢價 聯絡我們
PIC24EP128MC202-E/SP - 16-bit 60 MIPS 128KB Flash Motor MCU | Microchip
PIC24EP128MC202-E/SP

PIC24EP128MC202-E/SP - 16-bit 60 MIPS 128KB Flash Motor MCU | Microchip

The Microchip Technology PIC24EP128MC202-E/SP is a 16-bit PIC24EP family microcontroller engineered for high-performance precision motor control, delivering 60 MIPS (70 MIPS for the underlying 24EP core) of computational throughput with 128 KB of Flash program memory and 16 KB of RAM, housed in a 28-pin SPDIP (0.300 inch) through-hole package. The -E/SP suffix denotes the -40C to +125C extended industrial/automotive temperature grade and SPDIP packaging, and the device is qualified to AEC-Q100 for automotive applications. A 16-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals on one die, executing instructions on 16-bit-wide data paths to balance code density, deterministic interrupt response, and arithmetic performance for embedded control. PIC24EP parts sit within the broader PIC microcontroller taxonomy (PIC10/12/16/18/24/32) and specifically the PIC24E sub-family, which adds enhanced DSP instructions, dual read-port Flash, and high-speed PWM peripherals that the 'MC' (Motor Control) variants further optimize. Key differentiating features include a 12-bit ADC with up to 500 ksps conversion rate, dual 16-bit/32-bit op-amps accessible to the ADC front-end, high-resolution PWM (typical 7.14 ns resolution at 70 MIPS) for field-oriented control (FOC) loops, four 32-bit timer/capture modules, two UART, two SPI, and one I2C peripheral, plus a 32-bit CRC engine. The 'MC' peripheral set was specifically tuned for sensorless and sensored BLDC, PMSM, ACIM, and stepper motor control, including hardware fault inputs and PWM shutdown logic. Architecturally, the PIC24EP uses a Harvard-style modified RISC core with a 24-bit instruction word and dual-port Flash allowing live reads while executing, accelerating firmware hot paths in motor ISR loops. The high-speed ADC-to-PWM datapath, with the op-amps pre-conditioning current shunt signals, lets a single MCU close current, torque, and velocity loops at 20-50 kHz without an external DSP. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous (PMSM) motor controllers for appliance pumps and fans, automotive body and HVAC actuators, industrial servo drives, drone ESCs, robotic joints, and field-oriented control drives for low-voltage battery-powered tools. Designers also deploy this part in power-conversion front-ends that require high-resolution PWM plus the on-chip op-amps for current sensing. When designing with the PIC24EP128MC202-E/SP, allocate the op-amp outputs to dedicated ADC channels to minimize latency, and use the on-chip high-resolution PWM for low-speed torque ripple reduction. Be aware that the 28-SPDIP package imposes a larger PCB footprint than equivalent QFN parts, so confirm mechanical fit before selecting this packaging option. This page synthesizes authorized Microchip parametric data, DigiKey distributor pricing, package diagrams, and pin-to-pin compatible drop-in alternatives - engineering content not consolidated on a single manufacturer or distributor page.

詢價 聯絡我們
PIC24EP128MC202-H/MM - 16-bit 60 MIPS 128KB Flash MCU | Microchip
PIC24EP128MC202-H/MM

PIC24EP128MC202-H/MM - 16-bit 60 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24EP128MC202-H/MM is a 16-bit PIC24E microcontroller engineered for high-performance motor control applications, operating at up to 60 MIPS (70 MIPS peak) and delivering 128 KB of Flash program memory (43K x 24 words) with 16 KB of SRAM. It integrates dedicated motor-control peripherals including high-speed PWM (up to 1 ns PWM edge resolution), three on-chip operational amplifiers, and high-speed 12-bit ADCs (10/12-bit, 1.1 Msps), all in a compact 28-pin QFN-S (6x6 mm) package with exposed thermal pad. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and programmable peripherals. The PIC24E family uses a 16-bit modified Harvard architecture, meaning the program and data buses are separate, enabling simultaneous instruction fetch and data access for higher throughput. Within the broader hierarchy, the PIC24EP sits between 8-bit PIC18 devices and 32-bit PIC32 parts, optimized for DSP-like workloads such as field-oriented control (FOC) loops while remaining easy to program in C. Key features include AEC-Q100 automotive qualification, an extended operating temperature range of -40C to +150C (H grade), and integrated op-amps that eliminate external analog conditioning stages for current sensing. A built-in 32-bit CRC engine, multiple communication interfaces (UART, SPI, I2C, ECAN), and 5 PWM modules (3 complementary pairs) support BLDC, PMSM, and stepper motor drive topologies with minimum external components. Typical applications include automotive HVAC blowers, electric vehicle auxiliary pumps, industrial servo drives, drone ESCs, and consumer appliances such as washing-machine direct-drive motors. The combination of small footprint, automotive-grade qualification, and integrated analog makes the PIC24EP128MC202-H/MM especially suited for space-constrained, reliability-critical motor nodes.

詢價 聯絡我們
PIC24EP128MC202-H/SP - 70 MIPS 16-Bit Motor Control MCU | Microchip
PIC24EP128MC202-H/SP

PIC24EP128MC202-H/SP - 70 MIPS 16-Bit Motor Control MCU | Microchip

The Microchip Technology PIC24EP128MC202-H/SP is a 16-bit microcontroller from the PIC24E family, purpose-built for high-performance precision motor control. Operating at up to 70 MIPS with a 70 MHz system clock, the device integrates 128 KB of Flash program memory, 16 KB of SRAM, and an enhanced peripherals set including a high-speed 10-bit ADC, dual 16-bit analog comparators with 4 ns response, four on-chip op-amps, and dedicated PWM modules with up to 14 output pairs optimized for motor drive. The -H/SP suffix designates the high-temperature (-40C to +150C operating junction range), SPDIP-28 package variant aimed at automotive and industrial motor-control systems. According to the manufacturer datasheet family description, the PIC24E motor control family targets energy-efficient, quieter, longer-life precision motor drives in field-oriented control (FOC) and trapezoidal commutation topologies. A 16-bit microcontroller (MCU) is an integrated processor core, program memory, data memory, and peripherals on a single silicon die. The PIC24E architecture extends the PIC24 instruction set with hardware DSP support, wider addressing for larger memory maps, and a peripheral engine capable of running high-resolution PWM and fast ADC conversions with deterministic latency. Within the broader hierarchy, PIC24E parts belong to the digital signal controller (DSC) sub-category, which combines MCU simplicity with selected DSP capabilities such as MAC operations, useful for motor-control math pipelines. Key features of the PIC24EP128MC202 include integrated op-amps that eliminate external signal-conditioning stages for current sensing, a 12-bit ADC capable of up to 1.1 Msps for fast loop sampling, four PWM channels with 7.14 ns resolution for low-ripple torque output, and a flexible PWM fault input with low-latency shutdown. The device also includes a charge time measurement unit (CTMU) for cap-touch and temperature sensing, a Real-Time Clock/Calendar, and multiple communication interfaces including I2C, SPI, and UART. The SPDIP-28 package and 1.8-3.6V Vdd range simplify PCB routing and integrate with both leaded and surface-mount designs via a socket. The architecture uses a modified Harvard structure with separate program and data paths, a 16-bit ALU, and a deterministic instruction pipeline. For motor-control loops, the high-speed PWM and fast ADC are tightly coupled through the peripheral trigger system, enabling deterministic sample-and-update sequencing critical for FOC execution within 1 microsecond. Typical applications include BLDC motor drives, PMSM field-oriented control, AC induction motor V/Hz drives, automotive HVAC blowers, e-bike controllers, and industrial servo amplifiers. The on-chip op-amps are particularly valuable for shunt-based current sensing. A key design consideration when using this device is ensuring PCB layout preserves analog signal integrity - separate analog and digital ground domains are strongly recommended due to the high-speed switching currents typical in motor-drive stages. Use the on-chip op-amps for current sensing rather than external amplifiers to minimize drift and BOM cost. This page synthesizes real-time distributor pricing, drop-in same-package alternatives, and practical design notes drawn from the PIC24EP128MC202 datasheet family. Where the manufacturer datasheet gives an information graph or typical application circuit, this page makes that content directly queryable for engineers.

詢價 聯絡我們
PIC24EP128MC202-H/SS - 16-bit 70 MIPS Motor Control MCU 128KB Flash SSOP-28 | Microchip
PIC24EP128MC202-H/SS

PIC24EP128MC202-H/SS - 16-bit 70 MIPS Motor Control MCU 128KB Flash SSOP-28 | Microchip

The Microchip Technology PIC24EP128MC202-H/SS is a 16-bit microcontroller from the PIC24E family, designed for high-performance precision motor control. It integrates up to 128 KB of Flash program memory, 16 KB of RAM, and executes instructions at up to 70 MIPS (Million Instructions Per Second) from a 60 MHz system clock, in a 28-pin SSOP package. The -H/SS suffix indicates the High-temperature (-40C to +150C ambient) operating grade and SSOP-28 surface-mount package, with AEC-Q100 qualification supporting automotive-grade deployment. A digital signal controller (DSC) blends a microcontroller's deterministic control capability with a DSP's mathematical throughput. The PIC24EP DSC architecture extends the PIC24F baseline with single-cycle MAC instructions, a 16x16 hardware multiplier, dual 40-bit accumulators, and zero-overhead looping, allowing real-time sensorless Field-Oriented Control (FOC) for BLDC, PMSM, and AC induction motors. The 70 MIPS budget is sufficient for both current-loop and slower speed-loop control on a single core. Key features include three pairs of complementary PWM outputs with 1.04 ns PWM resolution, a 10/12-bit ADC with up to 6 channels and 500 ksps throughput, two on-chip operational amplifiers for current sensing, three analog comparators, and dedicated quadrature encoder interface (QEI) hardware. Communication peripherals cover I2C, SPI, UART, and CAN 2.0B with DeviceNet addressing support, allowing direct connection to industrial and automotive bus networks. Typical applications span industrial motor drives, appliance variable-frequency drives, automotive HVAC blowers and pumps, drone ESCs, and servo amplifiers. The combination of AEC-Q100 qualification, high-temperature grade, and integrated op-amps reduces external component count and PCB area in safety-critical systems. When migrating from a generic PIC24F MCU, ensure the new code uses the EP-series peripheral remap and the enhanced PWM fault-handling registers; otherwise the firmware ports with minor modifications. The High-temperature grade suits underhood automotive use; if your environment stays below +85C, the -I/SS industrial grade provides equivalent peripherals at lower cost.

詢價 聯絡我們
PIC24EP128MC202-I/MM - 16-bit 70 MIPS 128KB Flash Motor MCU | Microchip
PIC24EP128MC202-I/MM

PIC24EP128MC202-I/MM - 16-bit 70 MIPS 128KB Flash Motor MCU | Microchip

The Microchip Technology PIC24EP128MC202-I/MM is a 16-bit microcontroller from the PIC24EP motor-control family, delivering 70 MIPS of CPU performance with 128 KB of Flash program memory in a 28-pin QFN-S EP (MM) 6x6 mm package. Operating from 3.0 V to 3.6 V and integrating high-resolution PWM, operational amplifiers, and advanced analog peripherals, it is engineered for high-performance, energy-efficient precision motor-control systems. A 16-bit microcontroller (MCU) is an integrated circuit containing a CPU, program memory (Flash), data memory (SRAM), and on-chip peripherals on a single die. Within the broader taxonomy, the PIC24EP belongs to the digital signal controller (DSC) class - devices that combine a microcontroller architecture with DSP-grade instructions for real-time control loops. PIC24EP sits in the high-performance tier of Microchip's PIC24 family, above baseline PIC24F parts, and offers dedicated motor-control peripherals including up to 6 PWM channels with multiple modes and on-chip op-amps for current sensing. Key features include 70 MIPS CPU speed, 128 KB Flash (43K x 24 words), 16 KB SRAM, integrated high-speed PWM with up to 6 channels, multiple on-chip operational amplifiers for current sensing, advanced analog (12-bit ADC), and a rich set of communication peripherals. The MM package pinout supports field-oriented control (FOC) loops with minimal external components. Integrated op-amps reduce BOM by eliminating external current-sense amplifiers in most brushless DC motor designs. Typical applications include BLDC/PMSM motor drives, field-oriented control inverters, industrial fans and pumps, automotive HVAC actuators, and high-precision servo control. The high PWM resolution and on-chip analog front-end make it well suited to sensorless and sensored motor control algorithms. When designing with this MCU, ensure the 28-QFN exposed pad is properly soldered for thermal dissipation; this device is rated for the -40 C to +85 C industrial temperature range. Memory-mapped peripherals and a deterministic interrupt controller allow consistent loop times critical for smooth torque and speed control.

詢價 聯絡我們
PIC24EP128MC202-I/SO - 70 MIPS Motor Control MCU, 128KB Flash | Microchip
PIC24EP128MC202-I/SO

PIC24EP128MC202-I/SO - 70 MIPS Motor Control MCU, 128KB Flash | Microchip

The Microchip Technology PIC24EP128MC202-I/SO is a 16-bit microcontroller from the PIC24EP family delivering 70 MIPS of computational throughput, integrating 128 KB (43K x 24) of Flash program memory and a 28-pin SOIC wide-body (7.50 mm) package for surface-mount motor control designs. The device runs from a 3.0 V to 3.6 V supply, features 21 general-purpose I/O lines, and is engineered specifically for high-performance precision motor control applications such as BLDC, PMSM, AC induction and switched reluctance drives. A microcontroller (MCU) is a single-chip processor that integrates CPU core, non-volatile program memory, volatile data memory, and on-chip peripherals such as timers, ADCs, communication interfaces and pulse-width modulators (PWMs). The PIC24E family sits in the PIC24 16-bit MCU hierarchy, which itself belongs to the broader Microchip 16-bit digital signal controller (DSC) architecture family — devices that combine deterministic interrupt response with DSP-class multiply-accumulate capability. The PIC24EP128MC202 specifically is a 'Motor Control' variant (the MC suffix), pre-integrating high-speed PWMs, op amps and 10/12-bit ADCs optimized for closed-loop current and torque control. Key differentiating features include 70 MIPS core performance with single-cycle MAC, dedicated motor-control PWM with complementary outputs and programmable dead time, multiple on-chip operational amplifiers for current sensing, configurable 10-bit/12-bit ADC, and a wide operating temperature range of -40 °C to +85 °C for the industrial ('-I') grade. Compared with general-purpose PIC24EP128GP202 (GP variant, no MC peripherals), the MC202 retains the same core, Flash and SRAM but adds the high-resolution PWM, op-amp and advanced analog block required for field-oriented control. The PIC24E core uses a 16-bit modified Harvard architecture with separate program and data paths, 16 working registers, and C-friendly addressing. The 'EP' designation refers to enhanced PIC24E peripherals including up to 12-bit ADC, advanced PWM with 7.14 ns PWM resolution, and configurable logic cells. Internal Phase-Locked Loop (PLL) drives the system clock from an external crystal or internal oscillator, allowing precise PWM timing critical for motor commutation. Typical applications include brushless DC motor drives for industrial automation, ceiling fans and pumps, permanent magnet synchronous motor (PMSM) controllers for e-mobility and robotics, AC induction motor variable-frequency drives, switched reluctance drives, and precision power conversion stages. The SOIC-28 footprint enables integration into space-constrained driver boards alongside gate-driver ICs and power modules. When designing with this part, ensure the supply decoupling follows Microchip's recommended 0.1 µF ceramic plus bulk capacitor topology, the analog supply (AVDD) is filtered from VDD with a ferrite bead or separate LDO, and unused I/O pins are configured as outputs to minimize power consumption. Programming is supported by MPLAB X IDE with the XC16 compiler and ICD/PICkit in-circuit debuggers. This page synthesizes real-time distributor pricing, drop-in compatible same-package alternatives from the PIC24EP family, and practical design notes compiled from Microchip's PIC24EP datasheet family — information not consolidated on any single distributor product page.

詢價 聯絡我們
PIC24EP128MC202T-E/MM - 16-bit 128KB Flash Motor MCU | Microchip
PIC24EP128MC202T-E/MM

PIC24EP128MC202T-E/MM - 16-bit 128KB Flash Motor MCU | Microchip

The Microchip PIC24EP128MC202T-E/MM is a 16-bit PIC24E MCU engineered for high-performance motor control and digital signal control applications, featuring 128 KB of Flash program memory, 16 KB of RAM, and a 70 MIPS core speed, all integrated into a 28-pin VQFN-S EP (6x6 mm) package with exposed thermal pad. This automotive-grade device combines high-speed PWM, on-chip operational amplifiers, and advanced analog peripherals that enable precision motor control in compact designs. A microcontroller (MCU) is a single-chip computer containing a processor core, memory (Flash for program code and SRAM for data), and programmable I/O peripherals, and the PIC24E family belongs to the dsPIC33/PIC24E Harvard-architecture 16-bit MCU category, sitting within the broader microcontroller and embedded system hierarchy. The PIC24EP128MC202T-E/MM is specifically a member of the PIC24EP "Motor Control" sub-family, optimized for digital power conversion, BLDC/PMSM field-oriented control, and switched-mode power supply applications. Key features include a 16-bit modified Harvard architecture with single-cycle MAC, 70 MIPS performance at 60 MHz CPU clock, integrated op-amps for current sensing, multiple 16-bit timers, high-resolution PWM with up to 7.14 ns duty-cycle resolution, and a 10/12-bit ADC with dedicated S&H. The 'E' temperature suffix indicates -40C to +125C extended automotive temperature range, and the 'T' tape-and-reel packaging code suits high-volume SMT production. The 28-VQFN EP package delivers a compact footprint while the exposed pad provides low thermal resistance for dissipating power in closed-loop motor drive stages. Typical applications include 3-phase BLDC and PMSM motor control, sensorless FOC drives, switched-mode power supplies, digital lighting ballasts, and industrial automation subsystems requiring deterministic 16-bit DSP-style math with a single integrated MCU. When designing with this MCU, allocate ADC channels early for current sensing via integrated op-amps, route the PWM outputs to the gate-driver side of the PCB with short, matched traces, and decouple VDD/VSS pairs with 100 nF ceramics placed within 3 mm of each supply pin. This page synthesizes distributor pricing, drop-in alternatives, and practical motor-control design notes not found in the manufacturer datasheet.

詢價 聯絡我們
PIC24EP128MC202T-E/SS - 16-bit 128KB Flash MCU 60MIPs | Microchip
PIC24EP128MC202T-E/SS

PIC24EP128MC202T-E/SS - 16-bit 128KB Flash MCU 60MIPs | Microchip

The Microchip Technology PIC24EP128MC202T-E/SS is a 16-bit PIC24E microcontroller with 128 KB Flash program memory and 70 MIPS CPU performance, housed in a 28-pin SSOP package. It operates from 3.0 V to 3.6 V, integrates up to 60 MIPs DSP engine throughput, and targets AEC-Q100 Grade 1 automotive and industrial motor-control applications. A 16-bit microcontroller (MCU) is a programmable system-on-chip that combines a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and a rich peripheral set in a single package. The PIC24EP family specifically belongs to the dsPIC33/PIC24E Harvard architecture class - a modified Harvard design where instruction and data buses are separated for predictable throughput. Within the broader taxonomy, the PIC24EP sits under MCU -> microcontroller -> embedded processor -> semiconductor, and the MC-flavored sub-family adds dedicated motor-control peripherals (high-speed PWM, quadrature encoder interface, op amps, and high-speed ADC) that distinguish it from the GP-flavored general-purpose siblings in the same silicon generation. Key features include 128 KB (43K x 24) Flash, 16 KB RAM, 4 KB EEPROM, 21 I/O pins, dual 10-bit/12-bit ADC up to 500 ksps, three 16-bit timers, one 32-bit timer, three analog comparators, four 16-bit PWM channels with 7.14 ns resolution, and two on-chip op amps. The integrated Peripheral Trigger Generator (PTG), CTMU charge-time measurement unit, and JTAG boundary scan complete the on-chip glue logic. The SSOP-28 footprint (5.30 mm body width, 0.65 mm pitch) is the smallest AEC-Q100 qualified package in the PIC24EP MC family, easing layout on space-constrained motor-drive daughter-cards. Architecture-wise the PIC24EP MC202 uses a 5-stage pipeline, a hardware DSP engine for MAC operations, and a 16-bit-wide program word with a 24-bit instruction width. The high-speed 12-bit ADC and analog comparator pairings allow sub-microsecond current-loop sampling, which is the defining capability for sensorless FOC motor control. The integrated op-amps can condition phase-current sense resistors directly without external instrumentation stages. Typical applications include BLDC/PMSM motor control (sensorless FOC and trapezoidal commutation), field-oriented control for industrial drives, automotive body electronics, switch-mode power-supply digital control, and LED lighting controllers. The wide -40 C to +125 C operating range and AEC-Q100 qualification make it a strong fit for under-hood and chassis systems. Designers should plan for an external 8 MHz primary oscillator with PLL configured for 70 MIPS operation; the PLL setup is documented in the device datasheet's oscillator section. Brown-out reset must be enabled in configuration words for automotive applications. JTAG pads share pins with the high-speed PWM outputs - confirm pin mapping before committing to PCB layout. This page synthesizes distributor pricing, drop-in same-family alternatives (PIC24EP128MC202-H/SS, PIC24EP128MC202-E/SP, PIC24EP128MC202T-E/MM, etc.), and design notes beyond what the manufacturer datasheet provides in isolation.

詢價 聯絡我們
PIC24EP128MC202T-I/SO - 16-bit MCU, 128KB Flash, 60MIPS | Microchip
PIC24EP128MC202T-I/SO

PIC24EP128MC202T-I/SO - 16-bit MCU, 128KB Flash, 60MIPS | Microchip

The Microchip Technology PIC24EP128MC202T-I/SO is a 16-bit microcontroller from the PIC24E Motor Control family, offering 128KB of Flash program memory and 16KB of SRAM in a 28-pin SOIC package. It executes instructions at up to 70 MIPS (60 MHz core clock) and is purpose-built for high-performance motor control with on-chip peripherals including a high-speed PWM module, operational amplifiers, comparators, and advanced analog peripherals. A PIC24E microcontroller is a 16-bit Modified Harvard architecture DSC (Digital Signal Controller) that combines MCU control logic with DSP-class multiply-accumulate (MAC) throughput. In the system hierarchy it sits above 8-bit MCUs (PIC16/PIC18) and below 32-bit Cortex-M devices, delivering deterministic real-time control for power-conversion and motor-drive loops while retaining low BOM cost. Key features include up to 70 MIPS execution from a 60 MHz oscillator, dedicated Motor Control PWM (MCPWM) with up to 1.04 ns PWM resolution, four on-chip op-amps configurable as signal-conditioning front-ends, and high-speed comparators for current-shunt sensing. The 28 SOIC footprint exposes the integrated peripherals (UART, SPI, I2C, ECAN) needed for sensor feedback and host communication. Architecturally, the PIC24EP128MC202 uses a 16-bit wide datapath with DSP engine and single-cycle MAC to handle field-oriented control (FOC) math in real time. The advanced analog subsystem reduces external components by integrating op-amps and comparators directly into the silicon, shortening feedback-loop latency for closed-loop torque and speed control. Typical applications include BLDC/PMSM motor drives, sensored and sensorless FOC controllers, industrial inverters, fan and pump controllers, power-conversion boards (PFC + LLC), and sensor-fusion front-ends for robotics. The wide operating temperature range (-40C to +85C, industrial grade) suits harsh environments and automotive under-hood prototypes. When designing with this part, allocate PCB area for the analog power rail because the internal op-amps require clean AVDD. Use Microchip's MPLAB X IDE with XC16 compiler for code generation, and validate motor-drive control loops with the dsPIC33/PIC24E motor-control application notes and the MPLAB Device Blocks for Simulink.

詢價 聯絡我們
PIC24EP128MC202T-I/SS - 16-bit 70MIPS Motor MCU 128KB | Microchip
PIC24EP128MC202T-I/SS

PIC24EP128MC202T-I/SS - 16-bit 70MIPS Motor MCU 128KB | Microchip

The Microchip Technology PIC24EP128MC202T-I/SS is a high-performance 16-bit microcontroller from the PIC24EP Motor Control family, featuring 128KB of Flash program memory and 16KB of SRAM, and packaged in a 28-pin SSOP (0.209 inch, 5.30mm width). It executes up to 70 MIPS at 70 MHz and operates from a 3.0V to 3.6V supply. The 'T' suffix indicates tape-and-reel packaging and the 'I' grade denotes an industrial operating temperature range of -40C to +85C. A 16-bit microcontroller (MCU) is a single-chip computer that integrates a 16-bit CPU core, program memory, data RAM, and peripherals such as timers, ADCs, communication interfaces, and PWM modules. The PIC24EP family belongs to the broader dsPIC33 / PIC24E lineage of Microchip's high-performance 16-bit controllers, sitting architecturally between 8-bit PIC16/PIC18 MCUs and 32-bit ARM Cortex-M devices. This hierarchy makes the PIC24EP128MC202 ideal for demanding real-time control tasks that exceed 8-bit capability but do not justify the cost or power of a 32-bit MCU. Key features include three 16-bit timers, up to six PWM channels with high-speed PWM (up to 1 ns PWM resolution), a 10/12-bit ADC with up to 1.1 Msps conversion rate, four op amps and three comparators optimized for current/voltage sensing, plus communication peripherals including UART, SPI, I2C, and ECAN. The integrated motor-control PWM module supports complementary outputs with programmable dead time, making the device particularly well-suited to driving three-phase motor inverter stages. The device uses a 5-stage pipeline modified Harvard architecture with a 16-bit data path and 24-bit instruction width, providing high code density and deterministic interrupt response. An on-chip 8 MHz internal oscillator with PLL supports system clock scaling up to 70 MIPS without an external crystal, reducing BOM cost. The peripheral trigger generator (PTG) and DMA controller offload CPU overhead for high-speed data movement. Typical applications include brushless DC (BLDC) motor control, permanent magnet synchronous motor (PMSM) field-oriented control (FOC), industrial servo drives, low-power fan/pump controllers, and home appliances with sensorless or sensored motor feedback. The integrated op amps and comparators allow direct current-shunt monitoring and back-EMF sensing without external analog components. When designing with the PIC24EP128MC202T-I/SS, note that the SSOP-28 footprint has limited thermal dissipation, so high-current PWM outputs should drive gate-driver ICs rather than power switches directly. The MPLAB X IDE with the MPLAB XC16 compiler and the MPLAB Code Configurator (MCC) plugin is the recommended toolchain for peripheral setup and motor-control application development. This page synthesizes distributor pricing, drop-in alternatives, design notes, and application context that complement (but do not replace) the manufacturer datasheet.

詢價 聯絡我們