積體電路

子分類

📁 ADC/DAC 3,100+ 產品 📁 放大器 IC 1,900+ 產品 📁 音訊編解碼器 18 產品 📁 音訊 IC 2 產品 📁 時脈與計時 660+ 產品 📁 Comparator ICs 1 產品 📁 DSP 1,100+ 產品 📁 資料擷取 IC 2 產品 📁 數位電位器 4 產品 📁 顯示驅動器與控制器 1 產品 📁 FPGA 與 CPLD 7,300+ 產品 📁 介面 IC 3,300+ 產品 📁 LED 驅動器 1 產品 📁 邏輯 IC 460+ 產品 📁 記憶體 IC 870+ 產品 📁 微控制器 20,000+ 產品 📁 微處理器 4 產品 📁 馬達驅動器 1 產品 📁 其他 1 產品 📁 感測器與偵測器介面 1 產品 📁 特殊用途 IC 15 產品 📁 視訊 IC 14 產品

產品（39,000+)

PIC24EP512GP806-E/MR - 16-bit 512KB Flash MCU 64-VQFN | Microchip
PIC24EP512GP806-E/MR

PIC24EP512GP806-E/MR - 16-bit 512KB Flash MCU 64-VQFN | Microchip

The Microchip Technology PIC24EP512GP806-E/MR is a 16-bit microcontroller from the PIC24E general-purpose family, offering 512 KB of Flash program memory, 53 KB of RAM, and a 60 MIPS enhanced CPU core, all packaged in a 64-pin VQFN (9x9 mm) with exposed thermal pad. The device integrates dual CAN 2.0 modules, USB 2.0 (full-speed), and a 12-bit ADC with up to 1.1 Msps sampling, targeting industrial and automotive embedded applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and configurable peripheral interfaces on one silicon die. Within the semiconductor taxonomy, an MCU sits below the System-on-Chip (SoC) level and is the central building block of embedded electronics. The PIC24EP series specifically targets high-performance 16-bit control with DSP-style instructions, making it well suited to motor control, digital power conversion, and real-time signal processing where 8-bit MCUs lack headroom but full 32-bit parts are overkill. Key features of the PIC24EP512GP806-E/MR include 512 KB (170K x 24) self-programmable Flash, 53 KB SRAM, hardware multipliers with single-cycle MAC, dedicated DMA for ADC and USB, and 122 general-purpose I/O pins routed to the package. The device supports an industrial operating range of -40C to +125C (the -E temperature grade covers -40C to +125C) and operates from a single 3.0 V to 3.6 V supply. AEC-Q100 qualification is mentioned by some distributors for the variant, making it usable in automotive dashboard, body, and powertrain-adjacent designs. Architecturally, the PIC24EP512GP806 family uses a modified Harvard core with a 24-bit instruction word, dual 40-bit accumulators, and a 17 x 17 hardware multiplier. Dual CAN, USB, and four UART/SPI/I2C options are multiplexed onto the 122 GPIO, giving engineers enough peripheral headroom to replace external bridge ICs in many designs. The integrated DMA further reduces CPU load for ADC and USB pipelines. Typical applications include CAN-connected industrial sensor nodes, USB human-interface devices, motor-control front ends, and automotive body controllers. The dual-CAN and USB combination makes it especially attractive in gateway or bridge designs that aggregate vehicle-network traffic and expose a diagnostic or configuration port. When designing with this part, pay close attention to the 64-VQFN (9x9) exposed-pad PCB footprint and ensure the thermal pad is soldered to a continuous ground plane for thermal and electrical performance. The -E temperature grade is rated for -40C to +125C; for automotive-grade lifetime reliability, verify the specific AEC-Q100 documentation from Microchip rather than relying solely on distributor listings. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer product page alone.

詢價 聯絡我們
PIC24EP512GP806-E/PT - 70 MIPS 512KB Flash MCU TQFP-64 | Microchip
PIC24EP512GP806-E/PT

PIC24EP512GP806-E/PT - 70 MIPS 512KB Flash MCU TQFP-64 | Microchip

The Microchip PIC24EP512GP806-E/PT is a 16-bit microcontroller from the PIC24EP general-purpose family, delivering up to 70 MIPS core performance with 512 KB of Flash program memory and 52 KB of SRAM, packaged in a 64-pin TQFP (10x10 mm) and qualified for the extended -40C to +125C operating range. The device integrates dual CAN modules, USB 2.0 full-speed OTG, advanced analog peripherals, and an 8-bit parallel master port for graphic display interfacing. A 16-bit microcontroller (MCU) is a programmable processor that uses a 16-bit data path and instruction word, occupying a position between 8-bit MCUs and 32-bit MCUs in the embedded-processor hierarchy: 8-bit -> 16-bit -> 32-bit MCUs -> microprocessor units. PIC24EP devices are Digital Signal Controllers (DSCs), combining MCU control code density with DSP-class arithmetic capability in a single core, making them suitable for mixed control-and-signal-processing applications. Key features include 60 MIPS sustained performance at the -E temperature grade, dual Enhanced CAN (ECAN) modules supporting CAN 2.0B, a USB 2.0 On-The-Go peripheral, up to 122 general-purpose I/O pins, four 16-bit analog comparators, and a 10/12-bit ADC with up to 1.1 Msps conversion rate. The 64-pin TQFP package exposes 53 I/O pins with multiple communication peripherals including UART, SPI, I2C, and ECAN. An integrated 8 MHz internal oscillator with PLL provides flexible clocking options. The PIC24EP architecture uses a modified Harvard structure with separate program and data paths, plus a DSP engine that executes MAC operations in a single cycle. The 24-bit instruction word provides excellent code density while the 16-bit data path accelerates arithmetic. Multiple DMA channels (up to 15) and a dedicated crypto engine in some variants further enhance throughput for demanding real-time workloads. Typical applications include industrial automation and motor control, automotive body and chassis electronics, USB peripherals and HID-class devices, CAN-based networked sensors, medical instrumentation, and graphical user interfaces with TFT displays. The dual CAN interfaces make this part especially attractive for automotive gateway nodes and industrial fieldbus bridges. When designing with this MCU, pay close attention to the PGECx/PGEDx ICSP trace routing. Adding a small 20 pF capacitor between the PGEC line and VSS placed close to the chip improves programming reliability on this family. Always de-couple VDD/VSS with 100 nF ceramics and follow Microchip's recommended power-pin bulk capacitor layout. This page aggregates distributor pricing, drop-in same-package alternatives, and practical engineering notes not found in the standalone manufacturer datasheet, giving you an at-a-glance view of the part's value and substitute options.

詢價 聯絡我們
PIC24EP512GP806-I/PT - 16-Bit 70 MIPS MCU 512KB Flash | Microchip
PIC24EP512GP806-I/PT

PIC24EP512GP806-I/PT - 16-Bit 70 MIPS MCU 512KB Flash | Microchip

The Microchip Technology PIC24EP512GP806-I/PT is a 16-bit microcontroller from the PIC24EP general-purpose family, delivering 70 MIPS core performance at 140 MHz with 512 KB Flash program memory and 52 KB SRAM, housed in a 64-pin TQFP (10x10 mm) industrial-grade package. The device integrates high-speed PWM, USB 2.0 FS OTG, dual CAN 2.0B controllers, and a 12-bit ADC with up to 500 ksps sampling rate for advanced analog and motor-control designs. What is a 16-bit MCU? A microcontroller unit is a single-chip computer that combines a processor core, non-volatile program memory, working SRAM, and programmable peripherals on one die. The PIC24EP sits in the 16-bit DSP-enhanced MCU category within Microchip's broader 8/16/32-bit product hierarchy, and is itself part of the high-performance PIC24EP subfamily optimised for motor control, digital power conversion, and advanced sensing. A 70 MIPS core means the device executes 70 million instructions per second, eliminating many external timing components while supporting deterministic DSP-class arithmetic. Key features of this part include 512 KB Flash organised as 170K x 24 instruction words, 52 KB SRAM, two UART, two SPI, two I2C peripherals, dual CAN 2.0B modules, a USB 2.0 full-speed OTG controller, and a 12-bit ADC with up to 24 input channels. The device supports a -40C to +85C industrial temperature range and offers up to 53 digital I/O pins plus a Parallel Master Port (PMP) for graphics or external memory interfacing, all within a 64-pin TQFP footprint that simplifies PCB layout for high-I/O designs. The PIC24EP core uses a modified Harvard architecture with 24-bit instruction words, a 16-bit data path, a DSP engine with single-cycle hardware multiplier, and deterministic interrupt response. The combination of dual CAN, USB-OTG, and high-resolution PWM makes this MCU well-suited to industrial automation backbones and automotive body-network gateways, where deterministic real-time communication is mandatory. Typical applications include industrial motor control (BLDC, PMSM, ACIM), HVAC fan and pump controllers, PLC modules, USB-to-CAN bridges, and medical instrumentation. The wide temperature range and dual CAN ports also suit automotive body-electronics and chassis subsystems requiring ruggedised connectivity. When designing with this part, take care to follow the device's recommended JTAG/ICSP programming layout because the PIC24EP family is sensitive to PGEC/PGED crosstalk - place a 20 pF capacitor close to the PGEC line. For CAN applications, an external transceiver such as the Microchip MCP2551 is required. Firmware development uses MPLAB X IDE with the Microchip XC16 compiler. This page synthesises verified distributor stock levels, drop-in PIC24EP-family alternatives, and practical application guidance not found in the manufacturer datasheet alone.

詢價 聯絡我們
PIC24EP512GP806T-E/MR - 512KB Flash 16-bit MCU 60 MIPS | Microchip
PIC24EP512GP806T-E/MR

PIC24EP512GP806T-E/MR - 512KB Flash 16-bit MCU 60 MIPS | Microchip

The Microchip Technology PIC24EP512GP806T-E/MR is a high-performance 16-bit microcontroller from the PIC24EP family, integrating 512KB (170K x 24) of Flash program memory, 24K x 16 (52KB) of SRAM, and operating at up to 60 MIPS through a 3.3V supply. Housed in a 64-pin VQFN (9x9 mm) package with an exposed thermal pad, this automotive-grade (AEC-Q100) device combines Digital Signal Controller (DSC) capability with rich connectivity including USB, two CAN modules, DCI, PMP, and RTCC peripherals, alongside nine general-purpose timers. A 16-bit microcontroller (MCU) is a microprocessor-on-a-chip that executes instructions on 16-bit data widths, sitting in the hierarchy between 8-bit MCUs and 32-bit MCUs in terms of performance and code density. Digital Signal Controllers (DSCs) extend this concept by adding single-cycle MAC hardware and high-speed PWM, enabling real-time DSP operations like motor control and power conversion in the same silicon. The PIC24EP family is positioned as a high-performance general-purpose tier within Microchip's 16-bit portfolio, above the PIC24F/PIC24H families and below the dsPIC33 DSC family in computational throughput. Key features include 122 I/O pins on the larger package variants, internal oscillator support, and a Harvard architecture with separate program and data buses that allow simultaneous fetch and access. The PIC24EP512GP806T-E/MR specifically delivers 60 MIPS at 3.3V, distinguishing it from the 70 MIPS PIC24EP512GP806T-I/MR variant. Its wide peripheral set - 27 timers, multiple UART/SPI/I2C interfaces, two CAN modules, USB, and a 10/12-bit ADC - makes it suitable for complex embedded control systems. Architecturally, the PIC24EP512GP806T-E/MR uses a modified Harvard architecture with a 16-bit data path, 24-bit instruction width, and single-cycle hardware multiply, achieving 1.5 DMIPS/MHz. The integrated DSP engine provides single-cycle MAC operations essential for digital filter implementations in motor control and power-conversion feedback loops. The 512KB Flash supports self-programming, enabling in-field firmware updates. Typical applications include automotive body and chassis ECUs, industrial motor drives, UPS and power-conversion controllers, building automation gateways, and medical instrumentation requiring USB and CAN connectivity. The AEC-Q100 qualification extends its suitability to under-the-hood and safety-critical automotive subsystems. The wide peripheral mix also supports multi-protocol industrial sensors and IoT edge nodes with deterministic real-time response. When designing with this device, prioritize the VQFN exposed-pad thermal management strategy by stitching vias beneath the EP to the inner ground plane, since the device dissipates measurable power at 60 MIPS continuous operation. Reserve OSC1/OSC2 for an external crystal only when the internal oscillator's accuracy is insufficient for USB or CAN timing requirements. Plan for the two CAN modules and dedicated DMA channels to offload communication from the CPU. This page synthesizes distributor pricing, drop-in alternative listings, and practical design guidance not bundled in the manufacturer datasheet, helping engineers evaluate the PIC24EP512GP806T-E/MR against same-family and cross-family alternatives in a single view.

詢價 聯絡我們
PIC24EP512GP806T-I/MR - 16-bit MCU 512KB Flash 64-VQFN | Microchip
PIC24EP512GP806T-I/MR

PIC24EP512GP806T-I/MR - 16-bit MCU 512KB Flash 64-VQFN | Microchip

The Microchip Technology PIC24EP512GP806T-I/MR is a 16-bit microcontroller from the PIC24EP family, integrating 512 KB of Flash program memory, 52 KB of SRAM, and a 70 MIPS high-performance core into a 64-pin VQFN (9x9 mm) package. The device features high-speed PWM, USB 2.0 full-speed OTG, advanced analog peripherals including a 1.2 Msps 12-bit ADC and 10-bit DAC, and multiple communication interfaces such as CAN, SPI, I2C, and UART. With 53 general purpose I/O pins and operation across -40C to +85C industrial temperature range, it targets real-time control and connected embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals on one IC. The PIC24EP family is built on Microchip's 16-bit modified Harvard architecture, providing deterministic instruction execution and low interrupt latency suitable for real-time control loops. Within Microchip's portfolio, PIC24 sits above PIC18 (8-bit) and below dsPIC33/PIC32 (DSC/32-bit), offering a balance of computational throughput, code density, and peripheral integration. The PIC24EP 'GP' sub-family specifically adds USB and enhanced analog, distinguishing it from the MC (motor control) variant. Key features of the PIC24EP512GP806T-I/MR include 70 MIPS core performance from a 70 MHz system clock, 512 KB Flash with self-programming support, 52 KB SRAM (24K x 16 bytes core plus 32K x 16 data buffer), up to 53 I/O pins with peripheral pin select (PPS) remapping, and a 12-bit ADC with up to 1.2 Msps conversion rate. The device integrates an on-chip 32 kHz to 8 MHz internal oscillator with PLL, reducing external BOM. Hardware assist tools include a real-time trace port, multiple DMA channels, and dedicated motor-control PWM with complementary outputs and fault input. Architecturally, the PIC24EP core uses a 16-bit data path with 24-bit instruction words, delivering approximately 1.5 DMIPS/MHz and 0.7 mA/MHz active current at 70 MIPS. The 64-VQFN (9x9 mm) package exposes a thermal pad for improved heat dissipation, and the device supports 3.0V to 3.6V single-supply operation. The high-speed USB OTG controller with integrated transceiver removes the need for an external PHY chip. Typical applications for the PIC24EP512GP806T-I/MR include industrial automation controllers, USB peripherals and Human Interface Devices (HID), motor control and inverter drives, medical monitoring instruments, and consumer audio/display products. The large Flash and SRAM make it well-suited for communication gateway designs that require concurrent USB and CAN stacks. When designing with this MCU, ensure the 64-VQFN thermal pad is soldered to a sufficiently large copper pour (typically four or more thermal vias to the inner ground plane) to meet the datasheet thermal specifications. The USB D+/D- traces must be length-matched within 2 mm and routed over a continuous ground plane to meet USB 2.0 full-speed signal integrity requirements. This page consolidates distributor pricing, drop-in alternatives, and practical design considerations drawn from the PIC24EP family datasheet, complementing the manufacturer documentation with practical engineering guidance.

詢價 聯絡我們
PIC24EP512GP806T-I/PT - 16-Bit 70MIPS MCU 512KB Flash | Microchip
PIC24EP512GP806T-I/PT

PIC24EP512GP806T-I/PT - 16-Bit 70MIPS MCU 512KB Flash | Microchip

The Microchip Technology PIC24EP512GP806T-I/PT is a high-performance 16-bit microcontroller from the PIC24E general-purpose family, featuring a 70 MIPS dsPIC DSC core, 512 KB of Flash program memory and 52 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. Key features include 122 general-purpose I/O pins, a 12-bit ADC with up to 16 channels and 500 ksps conversion rate, USB 2.0 full-speed On-The-Go (OTG) interface, dual CAN 2.0B modules, and four UART/LIN/I2C/SPI configurable serial interfaces. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), working memory (RAM), and programmable peripherals (I/O, timers, communication controllers) onto a single die. Within the broader taxonomy, the PIC24EP sits between 8-bit MCUs (PIC16/PIC18) and 32-bit MCUs (PIC32) in Microchip's lineup, balancing performance and cost for general-purpose embedded designs. The PIC24E core adds Digital Signal Processing (DSP) instructions, which simplify closed-loop motor control and digital power-conversion algorithms. The PIC24EP512GP806T-I/PT supports an operating voltage range of 3.0 V to 3.6 V and an industrial temperature range of -40 C to +85 C. It integrates a 16-channel 12-bit ADC with dedicated Sample-and-Hold and 10-bit DAC outputs, four general-purpose 16-bit timers plus two input capture and two output compare modules, and a real-time clock with calendar (RTCC) capable of seconds-to-years counting with external 32.768 kHz crystal support. Typical applications include industrial motor control (BLDC, PMSM, AC induction), USB peripherals and Human Interface Devices (HID), CAN-connected automotive body controllers, and low-cost graphical displays driven through the Parallel Master Port (PMP). The combination of dual CAN, USB-OTG, and 16-bit PWM outputs is rare in this price class, making the part well-suited to mid-tier industrial and automotive ECUs. When designing with this MCU, always supply a stable 3.3 V rail (LDO or buck) within +/- 5 percent, place decoupling capacitors as close as possible to every VDD/VSS pair, and program the configuration bits during the first firmware load. For noise-critical analog sampling, route the analog VDD/VSS pins to a quiet supply plane isolated from the digital switching currents.

詢價 聯絡我們
PIC24EP512GU810 - 70 MIPS 16-bit MCU, 512KB Flash, USB & Dual CAN
PIC24EP512GU810

PIC24EP512GU810 - 70 MIPS 16-bit MCU, 512KB Flash, USB & Dual CAN

The Microchip PIC24EP512GU810 is a high-performance 16-bit microcontroller from the PIC24E general-purpose family, featuring a 70 MIPS core, 512 KB of Flash program memory, and 52 KB of SRAM in a 100-pin TQFP package. It integrates a USB 2.0 full-speed OTG interface, two independent CAN modules, advanced 10/12-bit ADC, and a high-speed PWM peripheral suitable for digital power and motor-control applications. What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of on-chip peripherals such as ADC, timers, communication controllers, and GPIO. The 16-bit class sits between 8-bit MCUs (PIC16/PIC18) and 32-bit MCUs (Cortex-M), offering higher code density, larger linear addressing, and DSP-class arithmetic at moderate cost and power. Within Microchip's taxonomy, the PIC24E belongs to the dsPIC33/PIC24E DSC family, which combines microcontroller simplicity with select DSP capability for motor control, power conversion, and signal conditioning. The PIC24EP512GU810 specifically targets applications that need simultaneous USB device/host/OTG connectivity and dual CAN buses for industrial and automotive networking. Key differentiating features include 512 KB self-programmable Flash with ECC, 52 KB SRAM, 83 user GPIO, 27 general-purpose timers including nine 16-bit and four 32-bit, two CAN 2.0B modules, USB 2.0 FS OTG, a 12-bit 1.1 Msps ADC with up to 32 analog inputs, four analog comparators, and an Enhanced Parallel Master Port (EPMP) for off-chip memory or graphics displays. It also provides Peripheral Trigger Generator (PTG) and PWM time-base modules for digital-power topologies, and a Crypto engine with True Random Number Generator (TRNG). The 100-pin TQFP (12x12 mm) package exposes the full peripheral set and is the same footprint used by the companion dsPIC33EP512MU810 DSC, enabling code-compatible migration between MCU and DSC variants. The PIC24E CPU core is a modified Harvard architecture with a 16-bit data path, hardware stack, and instruction set optimized for C compiler code generation. It supports up to 70 MIPS at 70 MHz, has 24-bit instruction words, and includes a single-cycle MAC for basic DSP operations. The device operates from 3.0V to 3.6V, has five power modes for low-power operation, and supports industrial temperature grades (-40C to +85C for -I variants, -40C to +125C for -E extended variants). Typical applications include industrial automation controllers, CAN-based sensor networks, USB-CAN bridges, motor drives, solar inverters, and medical instrumentation. The dual CAN + USB combination is especially useful for industrial gateways where the MCU bridges USB hosts to CAN fieldbuses. When designing with this device, verify that the 3.3V rail is clean; the MCU's high-speed ADC is sensitive to supply noise. Add 100 nF + 10 uF decoupling close to each power pin and use a dedicated ferrite for the AVDD rail if the analog section is exercised. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

詢價 聯絡我們
PIC24EP512GU810-E/BG - 60 MIPS 16-bit MCU 512KB Flash TFBGA-121
PIC24EP512GU810-E/BG

PIC24EP512GU810-E/BG - 60 MIPS 16-bit MCU 512KB Flash TFBGA-121

The Microchip Technology PIC24EP512GU810-E/BG is a high-performance 16-bit microcontroller from the PIC24EP family, delivering up to 70 MIPS core performance (60 MIPS at the 3.3V operating point) with 512 KB of Flash program memory and 52 KB of SRAM. Housed in a 121-pin TFBGA (BG) package at 10x10 mm, it is qualified to the AEC-Q100 automotive standard and integrates USB 2.0 Full-Speed/Hi-Speed OTG plus dual CAN 2.0B modules, eliminating the need for external communication ICs in connected-vehicle and industrial CAN-bus designs. A 16-bit MCU (microcontroller) is a single-chip computer that combines a CPU, Flash program memory, SRAM, peripherals (ADC, timers, communication controllers), and I/O on one silicon die. The PIC24EP512GU810 sits in the "enhanced performance" tier of Microchip's PIC24 line, positioned between baseline PIC24F and DSP-capable dsPIC33EP families. Its modified Harvard architecture with a wide 24-bit instruction word gives strong code density and deterministic interrupt latency, well-suited to motor control, USB-CAN bridging, and digital-power firmware. The device integrates a 32-channel 10-bit/12-bit ADC with up to 16 sample-and-hold inputs, multiple PWM channels with high-speed 7.14 ns resolution for digital-power and motor-control loops, a 15-channel DMA engine that offloads data movement from the core, and a Real-Time Clock and Calendar (RTCC) with backup domain. Its 3.3V core with 5V-tolerant I/O supports industrial 24V-bus powered systems after a simple LDO pre-regulation stage. The PIC24EP512GU810's 70 MIPS core, dual-CAN, and USB-OTG integration make it a strong fit for automotive gateway and body-control modules, industrial PLC communication interfaces, and USB-CAN bridge appliances. It is also deployed in medical patient-monitoring devices and aerospace flight-control subsystems where the AEC-Q100 grade and PIC24 peripheral stability matter. Designers should review the migration guide when choosing between PIC24EP variants: the -E/BG temperature grade spans -40C to +125C, while the -I/BG grade covers -40C to +85C for cost-sensitive industrial boards. Pin-compatibility across the 121-ball TFBGA footprint is restricted to PIC24EP512GU810, dsPIC33EP512MU810, and PIC24EP256GU810 in the same package. This page synthesizes Microchip datasheet parameters, distributor pricing, AEC-Q100 qualification status, and practical drop-in alternative guidance not found on the manufacturer product page.

詢價 聯絡我們
PIC24EP512GU810-E/PT - 60 MIPS 16-bit MCU, 512KB Flash, USB/CAN | Microchip
PIC24EP512GU810-E/PT

PIC24EP512GU810-E/PT - 60 MIPS 16-bit MCU, 512KB Flash, USB/CAN | Microchip

The Microchip Technology PIC24EP512GU810-E/PT is a 16-bit microcontroller from the PIC24E family, featuring a 60 MIPS (70 MHz) CPU core, 512 KB Flash program memory, and 52 KB RAM, housed in a 100-pin TQFP (12x12 mm) package. It integrates full-speed USB 2.0, dual CAN modules, advanced analog peripherals, and 83 I/O pins, targeting industrial, automotive, and embedded-control designs requiring connectivity and signal processing in a single device. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and configurable peripherals on one die. The PIC24E family extends this concept with a 16-bit modified Harvard architecture that executes most instructions in one cycle; in the system hierarchy it sits between simple 8-bit MCUs and 32-bit ARM Cortex-M devices. This part specifically belongs to the PIC24E general-purpose sub-family known for high-throughput DSP-friendly math, USB, and CAN connectivity. Key features include 16-bit ADC with up to 12-bit conversion at 1.1 Msps, multiple 16-bit timers, nine 16-bit and eight 32-bit general-purpose timers for a total of 27 timer channels, PWM with high-resolution duty control, and dual ECAN modules compliant with CAN 2.0B. The device runs from 3.0V to 3.6V with on-chip LDO, supports -40C to +125C operating temperature, and is AEC-Q100 qualified for automotive applications. The PIC24EP512GU810 uses Microchip's 16-bit modified Harvard architecture with DSP extensions, deterministic interrupt latency, and a wide peripheral set, enabling the same chip to drive motor control loops, run a USB stack, and bridge to CAN networks. The large 512 KB Flash supports over-the-air (OTA) bootloaders and dual-image schemes, while the 52 KB RAM accommodates USB HID/CDC class stacks plus communications buffers without external memory expansion. Typical applications include industrial automation and motor control, automotive body and chassis ECUs, USB-CDC/HID peripherals, CAN-bridge gateways, and medical instrumentation. The wide I/O count makes it suitable for graphical HMI panels when paired with an external TFT controller. In each of these roles the part replaces a discrete MCU-plus-CAN/USB transceiver board with a single chip solution. Design tip: route the USB D+/D- lines as a 90-ohm differential pair and place the 48 MHz crystal within 5 mm of the OSCI/OSCO pins. For CAN, use a 120-ohm termination resistor and isolate the bus from noisy switching nodes. The on-chip LDO requires a 1 uF + 10 uF decoupling network on VDDCORE. This page synthesizes distributor pricing, same-brand drop-in alternatives, application notes, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, sourcing, and schematic-level decisions.

詢價 聯絡我們
PIC24EP512GU810-I/PF - 16-Bit 70 MIPS MCU, USB, Dual CAN | Microchip
PIC24EP512GU810-I/PF

PIC24EP512GU810-I/PF - 16-Bit 70 MIPS MCU, USB, Dual CAN | Microchip

The Microchip PIC24EP512GU810-I/PF is a high-performance 16-bit microcontroller from the PIC24E family, delivering up to 70 MIPS throughput from a 140 MHz core while integrating 512 KB of Flash and 52 KB of SRAM in a 100-pin TQFP (14x14 mm) package. The industrial temperature grade (-40C to +85C) and 3.0-3.6 V single-supply operation suit it for embedded designs that require both computational headroom and rich connectivity peripherals. The -I/PF suffix indicates the industrial -40C to +85C operating range with a TQFP-100 package, and the part is supplied in tape-and-reel packaging for high-volume assembly. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a configurable set of peripherals on one silicon die. Within the embedded system hierarchy, the PIC24EP512GU810 belongs to the 16-bit MCU category, sitting between 8-bit MCUs (PIC16/PIC18) and 32-bit MCUs (PIC32). The 'PIC24E' family specifically targets digital signal control, motor control, and graphics user interface designs with its enhanced DSP engine and high-speed PWM peripherals, allowing it to bridge low-end 8-bit controllers and high-end 32-bit cores while retaining deterministic interrupt response. Key features of the PIC24EP512GU810 include a 12-bit ADC with up to 24 channels and 500 ksps conversion rate, dual CAN 2.0B modules, USB 2.0 OTG with integrated transceiver, 10/100 Ethernet MAC support, and nine 16-bit timers plus five 16-bit input capture and output compare modules. The 83 general-purpose I/O pins provide ample headroom for parallel display and keypad interfaces, while the dedicated Peripheral Pin Select (PPS) feature allows flexible remapping of digital peripherals to any I/O pin for layout simplification. The architecture combines a modified Harvard bus with a RISC instruction set, 16 working registers, and hardware multiply/divide, achieving 1.55 DMIPS/MHz. Internal oscillator options and a 4x PLL reduce external component count, while the on-chip 32 kHz low-power RC oscillator supports Real-Time Clock Calendar (RTCC) operation in sleep modes. Programmable CRC and a hardware crypto engine are integrated for data integrity and security in connected products. Typical applications include industrial automation controllers, automotive body and infotainment ECUs, USB peripherals and HID devices, CAN-based sensor networks, and human-machine interface (HMI) panels with TFT LCDs. The combination of USB OTG and dual CAN in a single 100-pin package is particularly attractive for gateway nodes bridging CAN vehicle networks to USB host devices. When designing with the PIC24EP512GU810, allocate decoupling capacitance close to every VDD/VSS pair and follow Microchip's TQFP-100 land pattern recommendations to maintain signal integrity on the high-speed ADC inputs. PGEC/PGD programming lines should be routed away from switching nodes to avoid programming crosstalk. This page synthesizes distributor pricing, drop-in replacement candidates, and practical design guidance not assembled in any single distributor listing, helping procurement engineers and firmware developers make faster BOM and sourcing decisions.

詢價 聯絡我們
PIC24EP512GU810-I/PT - 16-bit 70 MIPS MCU, 512KB Flash, USB/CAN | Microchip
PIC24EP512GU810-I/PT

PIC24EP512GU810-I/PT - 16-bit 70 MIPS MCU, 512KB Flash, USB/CAN | Microchip

The Microchip Technology PIC24EP512GU810-I/PT is a 16-bit PIC24E general-purpose microcontroller delivering up to 70 MIPS performance from a 3.0V to 3.6V supply in a 100-pin TQFP (12x12 mm) package. It integrates 512 KB of Flash program memory, 52 KB of SRAM, USB 2.0 (OTG/Host/Device), and dual CAN controllers, targeting industrial, automotive and embedded-control designs that demand deterministic DSP-class signal processing alongside rich connectivity. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (SRAM), and a rich set of peripherals (timers, ADC, communication blocks, GPIO). PIC24E sits in the 16-bit MCU hierarchy: 8-bit (PIC10/12/16/18) -> 16-bit (PIC24F/24H/24E/dsPIC33) -> 32-bit (PIC32MX/SAM/GD32). Its modified Harvard architecture and 16-bit wide data path deliver higher throughput than 8-bit parts while keeping the deterministic interrupt model familiar to PIC users. Key features include a 70 MIPS core with DSP engine, 512 KB self-programmable Flash with ECC, 52 KB SRAM, an integrated 12-bit 1.1 Msps ADC with up to 32 analog inputs, four DMA channels, and the previously mentioned dual CAN 2.0B interfaces plus USB 2.0 On-The-Go. The Advanced Analog includes comparators and configurable logic cells, while 27 timers (nine 16-bit, eighteen 32-bit) cover capture/compare/PWM. The device is qualified to AEC-Q100 Grade 1/0 variants, supporting automotive ambient ranges of -40C to +125C depending on the speed grade. The 100-pin TQFP (PT) variant exposes 83 I/O lines, giving designers ample headroom for parallel buses, TFT displays, and external memory. The PT package provides a generous thermal pad area suitable for industrial and automotive environments; the alternate BG (121-ball BGA) variant supports space-constrained layouts but is not pin-compatible with PT.

詢價 聯絡我們
PIC24EP512GU810T-I/PF - 16-bit 60 MIPS MCU, 512KB Flash, USB, CAN | Microchip TQFP-100
PIC24EP512GU810T-I/PF

PIC24EP512GU810T-I/PF - 16-bit 60 MIPS MCU, 512KB Flash, USB, CAN | Microchip TQFP-100

The Microchip Technology PIC24EP512GU810T-I/PF is a high-performance 16-bit PIC24E microcontroller built around a 70 MIPS modified-Harvard core, integrating 512 KB of Flash program memory, 52 KB of SRAM, and a USB 2.0 full-speed On-The-Go (OTG) controller in a 100-pin TQFP (14x14 mm) package. The device operates from a 3.0 V to 3.6 V supply at up to 60 MIPS and is qualified for the industrial -40C to +85C temperature range, with 83 general-purpose I/O pins, dual CAN 2.0B modules, four UART/USART blocks, two I2C, two SPI, IrDA, and LINbus peripherals. A microcontroller (MCU) is an integrated circuit that combines a CPU, non-volatile program memory (typically Flash), volatile working memory (SRAM), and a configurable set of on-chip peripherals behind a unified bus architecture. MCUs sit one level above digital signal controllers (DSCs) in the embedded-processing taxonomy: PIC24E general-purpose MCUs are optimized for control and connectivity tasks, while dsPIC33E DSCs in the same package family add a DSP engine for high-throughput signal conditioning. The PIC24EP512GU810 belongs to Microchip's PIC24 power-management-aware MCU family, which includes GP (general purpose), MC (motor control), and GU (USB + graphics) variants sharing the same peripheral library. Key features include a 32-channel 10/12-bit ADC with up to 1.1 Msps conversion rate, nine general-purpose 16-bit timers, nine Input Capture, nine Output Compare/Standard PWM, and additional dedicated High-Speed PWM with 7.14 ns resolution for digital power and motor control. The Peripheral Pin Select (PPS) remapping subsystem decouples peripheral signals from physical pins, simplifying PCB routing. A 15-channel DMA engine offloads data movement between peripherals and memory, freeing CPU cycles. An integrated hardware crypto engine, RTCC with calendar mode, and a parallel master port (PMP) for external graphics displays complete the integration. The PIC24EP512GU810 employs a 16-bit modified-Harvard architecture with separate program and data buses, single-cycle hardware multiply, hardware divide, and a 24-bit instruction word. The 512 KB Flash supports live update through dual-partition Flash partitioning, and the 52 KB SRAM is large enough to hold TCP/IP stacks, USB HID/CDC class drivers, or graphic framebuffers without external memory. The wide I/O count (83 GPIO) and dual CAN interfaces allow the device to serve as a central node in industrial networks, automotive body controllers, or USB-equipped point-of-sale terminals. Typical applications include industrial automation controllers, automotive infotainment and body-control modules, USB human-interface devices, barcode scanners and portable instrumentation, dual-CAN bridges, and battery-powered data loggers with USB charging. The combination of USB OTG and dual CAN makes it particularly attractive as a gateway between a USB host and a CAN-based vehicle or industrial bus. The industrial temperature grade allows deployment in factory-floor and outdoor enclosure designs. When designing with this part, note that the supply voltage range is 3.0 V to 3.6 V and that careful analog supply decoupling is required to achieve the rated ADC performance. PPS pin assignments must be locked early in firmware development because not all remappable functions are available on every pin, and the high-speed PWM and RTCC functions draw on dedicated oscillators that must be enabled via configuration bits. This page synthesizes distributor pricing, drop-in same-package alternatives drawn from the PIC24E family, and practical PCB/firmware design notes that go beyond the bare information shown on the manufacturer datasheet.

詢價 聯絡我們
PIC24EP512GU810T-I/PT - 16-Bit 60 MIPS MCU, USB, Dual CAN, 100-TQFP | Microchip
PIC24EP512GU810T-I/PT

PIC24EP512GU810T-I/PT - 16-Bit 60 MIPS MCU, USB, Dual CAN, 100-TQFP | Microchip

The Microchip Technology PIC24EP512GU810T-I/PT is a 16-bit microcontroller from the PIC24E general-purpose family delivering up to 60 MIPS (70 MIPS peak) performance, 512 KB of Flash program memory, 52 KB of SRAM, integrated USB 2.0 full-speed OTG and dual CAN interfaces, housed in a 100-pin TQFP (12x12 mm) package with 83 general-purpose I/O pins. Tape-and-reel packaging; industrial -40C to +85C temperature grade; single 3.0V-3.6V supply (3.3V nominal). A PIC24E microcontroller is a 16-bit modified-Harvard RISC MCU purpose-built for embedded designs that demand real-time control plus connectivity. The PIC24E architecture (parent taxonomy: PIC24 -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor) pairs a 16-bit data path with a 24-bit instruction word, deterministic interrupt latency, and DSP-friendly instructions, sitting between 8-bit PIC MCUs and 32-bit ARM Cortex parts in capability and complexity. Key features include up to 83 I/O pins, 15 DMA channels that move peripheral data without CPU intervention, a 12-bit ADC capable of up to 1.1 Msps, 27 general-purpose timers (nine 16-bit), high-speed PWM, comparators, op-amps, a charge-time measurement unit (CTMU), and a Real-Time Clock/Calendar. Two CAN 2.0B controllers plus USB 2.0 full-speed OTG on a single 3.3V rail make this part attractive as a USB/CAN bridge. The PIC24E core uses a 7-stage pipeline, hardware multiply/divide, and a deterministic interrupt response. The 15-channel peripheral DMA engine lets the core sleep while peripherals stream data to/from RAM - ideal for sustained USB or CAN throughput without taxing the CPU. Typical applications include industrial automation (PLC modules, sensor hubs), automotive body and CAN gateways, USB-to-CAN bridges, motor control (BLDC and PMSM), medical instrumentation, consumer appliances with HMI displays, and high-density IoT edge nodes. When designing with this part, place a 1uF bulk plus a 0.1uF bypass capacitor adjacent to every VDD/VSS pin pair, route the 60 MHz crystal traces with short guarded paths, and use DMA to keep USB/CAN traffic off the core. This page synthesizes distributor pricing, drop-in alternatives within the PIC24E 100-pin TQFP family, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
PIC24EP512GU814-E/PL - 16-Bit MCU, 512KB Flash, USB, 2x CAN | Microchip
PIC24EP512GU814-E/PL

PIC24EP512GU814-E/PL - 16-Bit MCU, 512KB Flash, USB, 2x CAN | Microchip

The Microchip PIC24EP512GU814-E/PL is a high-performance 16-bit microcontroller from the PIC24EP family, delivering up to 70 MIPS from a 3.3V supply. It integrates 512 KB of Flash program memory and 52 KB of SRAM, housed in a 144-pin LQFP package designed for industrial and automotive applications. The device supports the extended -40C to +125C automotive temperature range as indicated by the -E suffix. A 16-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals including timers, communication interfaces, and analog blocks. The PIC24E family specifically targets high-performance embedded applications, sitting in the hierarchy: PIC24E -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. It is widely adopted where 8-bit MCUs lack computational headroom but full 32-bit processors are overkill. Key features include dual 10/12-bit ADC blocks capable of up to 500 ksps each, USB On-The-Go (OTG), dual CAN 2.0B interfaces, nine 16-bit timers plus nine input capture and nine output compare/PWM channels, an 8-bit Parallel Master Port (PMP) for graphics displays, and a hardware Real-Time Clock and Calendar (RTCC). The CPU operates at up to 60 MHz internal oscillator with PLL scaling to the 70 MIPS throughput. Architecturally, the PIC24EP uses a modified Harvard RISC core with a 16-bit instruction word and 24-bit instruction path, giving it strong code density and a deterministic instruction cycle. Its dual CAN modules support CAN 2.0B active with acceptance filters, while the USB OTG controller provides full-speed (12 Mbps) device/host/OTG operation without an external transceiver PHY for device mode. Typical applications include automotive body and powertrain ECUs, industrial PLCs, motor control with field-oriented control (FOC) algorithms, medical patient monitors, and CAN-connected sensor hubs. The combination of dual CAN, USB, and 70 MIPS core is uncommon at this integration level and price. Designers should note that the -E/PL variant operates from 3.0V to 3.6V only (no internal 5V tolerance on I/O); a 3.3V LDO is required when sourced from a 5V rail. The 144-pin LQFP package requires a 4-layer PCB with continuous ground plane for SI/EMI compliance in CAN-bus applications. This page synthesizes distributor stock levels, drop-in alternatives from the same PIC24E family, and practical design notes that complement the 622-page Microchip datasheet rather than duplicating it.

詢價 聯絡我們
PIC24EP512GU814-I/PL - 16-bit MCU 512KB Flash USB CAN | Microchip
PIC24EP512GU814-I/PL

PIC24EP512GU814-I/PL - 16-bit MCU 512KB Flash USB CAN | Microchip

The Microchip Technology PIC24EP512GU814-I/PL is a high-performance 16-bit PIC24E microcontroller delivering up to 70 MIPS through its enhanced PIC® RISC architecture, packaged in a 144-pin LQFP (PL) with 512 KB of Flash program memory and 52 KB of RAM. The -I suffix denotes the industrial -40°C to +85°C operating temperature range and the part operates from a single 3.3 V supply typical of PIC24E designs. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash), data memory (RAM), and a rich set of peripherals into a single chip. The PIC24E family sits in Microchip's 16-bit DSC (Digital Signal Controller) hierarchy: 8-bit PIC16/PIC18 -> 16-bit PIC24 -> 16-bit dsPIC33 -> 32-bit PIC32, offering a balance of deterministic performance, low power, and DSP-class signal processing in cost-sensitive embedded designs. Key features of the PIC24EP512GU814 include integrated Full-Speed USB 2.0 (host/device/OTG), two independent CAN 2.0B controllers, a 12-bit ADC with up to 1.1 Msps conversion rate, motor-control PWMs, and a Peripheral Pin Select (PPS) subsystem that allows digital peripheral I/O mapping to a wide range of physical pins. The 70 MIPS core gives it strong DSP-class performance for filtering and control loops. The 144-pin LQFP (20x20x1.4 mm) package exposes a large number of I/O and analog channels. Architecturally, the PIC24EP core uses a 24-bit instruction word with 16-bit data paths, single-cycle hardware MAC, hardware DO/DO# loops, zero-overhead looping, and tightly-coupled interrupt logic. This makes it well-suited for closed-loop motor control, power conversion, and high-throughput serial protocols running concurrently. Typical applications include industrial automation (PLC, sensor hubs, motor drives), automotive body and chassis ECUs (CAN-connected nodes), USB peripherals (data loggers, instrumentation, Human Interface Devices), medical instrumentation, and embedded graphical HMI panels. The USB + Dual-CAN combination is particularly attractive for gateway and bridge designs. When designing with this part, plan the PPS remapping table early so digital peripherals land on the desired pins without conflicts, and ensure the 3.3 V rail provides sufficient decoupling near each VDD/VSS pair. The 144-LQFP footprint requires careful escape routing and 0.4 mm pitch traces. This page synthesizes real-time distributor pricing, drop-in same-package alternatives, and practical design notes curated for engineers evaluating the PIC24EP512GU814 family for new designs or as a substitute on an existing 144-pin LQFP layout.

詢價 聯絡我們
PIC24EP512GU814T-I/PH - 512KB Flash, USB, Dual CAN 16-bit MCU
PIC24EP512GU814T-I/PH

PIC24EP512GU814T-I/PH - 512KB Flash, USB, Dual CAN 16-bit MCU

The Microchip Technology PIC24EP512GU814T-I/PH is a high-performance 16-bit microcontroller from the PIC24EP family, featuring a 70 MIPS CPU core, 512KB of Flash program memory, 52KB of RAM, and an integrated USB 2.0 full-speed interface with on-chip transceiver, plus two independent CAN modules. It is housed in a 144-pin TQFP (PH) package measuring 16x16 mm, designed for industrial-grade applications with an operating temperature range of -40C to +85C. A 16-bit microcontroller (MCU) is an embedded computing device that combines a CPU, memory, and peripherals on a single silicon die. Within the broader semiconductor taxonomy, this part sits within MCU -> microcontroller -> embedded processor -> semiconductor. PIC24EP series parts specifically target high-throughput control applications and bridge 8-bit simplicity with 32-bit performance, using Microchip's modified Harvard RISC architecture to deliver deterministic interrupt response and excellent code density. Key features include up to 70 MIPS performance at 3.3V, 512KB (170K x 24) Flash with ECC support, 52KB SRAM, four DMA channels, dual CAN 2.0B controllers, USB 2.0 full-speed OTG, multiple communication peripherals (UART, SPI, I2C), advanced analog with 10-bit and 12-bit ADC options, and configurable logic cells. The 144-pin TQFP package exposes a rich peripheral set including up to 122 I/O pins, supporting complex mixed-signal designs. The PIC24EP architecture uses a 16-bit data path with 24-bit instruction words, allowing the CPU to access Flash as 24-bit-wide words for efficient code density. Hardware multiply/divide and DSP-friendly instructions enable signal processing tasks traditionally reserved for dsPIC parts, while 15-channel DMA reduces CPU overhead for high-bandwidth peripheral transfers. Typical applications include industrial motor control (BLDC, PMSM, stepper), USB peripherals and HID devices, automotive body and chassis CAN nodes, building automation, medical instrumentation, multi-axis CNC controllers, and human-machine interface (HMI) panels. Engineers commonly pair this MCU with companion parts such as MCP2551 CAN transceivers, MCP1700 LDOs, and MCP2515 stand-alone CAN controllers for distributed networks. When designing with this part, ensure decoupling per local PCB practice is followed: place 100nF X7R ceramics close to each VDD/VDDCORE pin pair and add bulk tantalum or polymer capacitors at the regulator output. Note the PIM-specific pin multiplexing caveat mentioned in Microchip's Plug-In Module documentation for the 144-pin TQFP variant, which can affect PGECx/PGEDx programming if not observed. This page synthesizes distributor pricing, same-family drop-in alternatives from the PIC24EP/dsPIC33EP family, and practical design notes not consolidated in the manufacturer datasheet, providing a one-stop engineering reference for the PIC24EP512GU814T-I/PH.

詢價 聯絡我們
PIC24EP512GU814T-I/PL - 60 MIPS, 512KB Flash, USB/CAN MCU | Microchip
PIC24EP512GU814T-I/PL

PIC24EP512GU814T-I/PL - 60 MIPS, 512KB Flash, USB/CAN MCU | Microchip

The Microchip Technology PIC24EP512GU814T-I/PL is a high-performance 16-bit microcontroller from the PIC24E general-purpose family, featuring a 60 MIPS core, 512 KB of Flash program memory, and 52 KB of RAM in a 144-pin LQFP (PL) package. The device integrates Full-Speed USB 2.0, two CAN 2.0 modules, 15 DMA channels, and 122 I/O pins for advanced connectivity. A 16-bit MCU (microcontroller unit) is an integrated circuit containing a CPU, memory, and peripherals on a single die. PIC24E devices use a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, optimized for C-code density while delivering deterministic real-time performance. The PIC24EP subfamily combines a 60 MIPS execution pipeline with DSP-grade multiply and DSP-instructions suited for motor control and digital signal processing tasks. Key features include 512 KB Flash organized as 170K x 24, 52 KB SRAM, 4 KB configuration Flash, a 32-bit data path, and a peripheral set that includes 9 timers, a 32-channel ADC (12-bit/10-bit configurable), five 16-bit analog comparators, five UART/SPI/I2C-capable ECAN modules, two I2C, three SPI, and a CTMU for capacitive touch sensing. The 60 MHz VCO drives the system clock through programmable PLL blocks, supporting USB 48 MHz and peripheral timing requirements. Architecturally, the PIC24EP512GU814 employs a 16-bit RISC engine with single-cycle MAC and hardware DIV instructions. Bus-level DMA reduces CPU load during peripheral-to-memory transfers, and the dual CAN controllers support CAN 2.0B active frames at 1 Mbps. The 144-pin LQFP (20x20 mm) package exposes 122 GPIO lines, providing ample pin budget for parallel buses and multiple sensor interfaces. Typical applications include industrial automation controllers with CAN networking, USB-based data acquisition modules, motor control inverters using high-speed PWM, medical instrumentation requiring mixed analog/digital interfaces, and automotive body/comfort ECUs. The dual CAN + USB combination is particularly valuable for diagnostic bridges and field-serviceable equipment. When designing with this device, budget 3.0V to 3.6V supply voltage, use 10 uF + 0.1 uF VDD decoupling near each power pin pair, and ensure the VDD/VSS pin assignments of the 144-pin LQFP match the routing on your target board. The dual CAN and USB require careful impedance-controlled routing to maintain signal integrity at 1 Mbps CAN and 12 Mbps USB Full-Speed. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers evaluate the PIC24EP512GU814T-I/PL for new designs and identify pin-compatible family members for cost-down or qualification migrations.

詢價 聯絡我們
PIC24EP512MC202-E/SO - 70MIPS 16-bit Motor Control MCU | Microchip
PIC24EP512MC202-E/SO

PIC24EP512MC202-E/SO - 70MIPS 16-bit Motor Control MCU | Microchip

The Microchip PIC24EP512MC202-E/SO is a 16-bit Digital Signal Controller (DSC) from the PIC24E family, rated for 70 MIPS execution, with 512 KB Flash program memory and 48 KB SRAM, in a 28-pin SOIC (SO) wide-body package. It integrates a 60 MHz CPU core, Motor Control PWM (MCPWM), Quadrature Encoder Interface (QEI), multiple operational amplifiers and high-speed 10/12-bit ADCs for closed-loop motor and power-conversion control. A Digital Signal Controller is a hybrid class of microcontroller that combines an MCU's deterministic peripherals with a DSP's MAC engine; the PIC24E DSC family extends the PIC24 baseline architecture with single-cycle MAC, hardware fractional arithmetic, and DSP-oriented addressing modes for sensorless FOC, audio processing and digital filtering. This places the PIC24E in the hierarchy: microcontroller -> 16-bit MCU -> DSC -> motor control DSC -> power-conversion controller. Key differentiating features for this E/SO variant include the wide SOIC-28 footprint for hand-repairable through-hole-style prototyping, on-chip comparators for current sensing, up to four analog op-amps usable for signal conditioning, dedicated PWM channels with independent time bases for three-phase motor drive, and a 5V tolerant I/O ring that simplifies interfaces to industrial 24V gate drivers after external clamping. The part carries Microchip's "E" extended-temperature grade (-40C to +125C) suited to underhood and industrial enclosures. Architecturally, the PIC24EP512MC202-E/SO uses a modified Harvard bus with separate program and data paths, a hardware multiply/accumulate unit, and tightly-coupled peripherals that allow deterministic interrupt latency suitable for FOC loops at switching frequencies above 50 kHz. Its 512 KB Flash (170K x 24 organization) supports dual-partition live-update firmware, useful for in-field motor drive OTA upgrades. Typical applications include field-oriented control of PMSM and BLDC motors (drones, e-bikes, appliances), high-speed sensorless compressors, digital power conversion (totem-pole PFC, LLC resonant), industrial drives (servo amplifiers), automotive auxiliary pumps, and CNC spindle control. The integrated op-amps and comparators reduce external analog BOM by 6-10 components. When designing with this part, ensure the VDD/VSS pair is decoupled with one 100 nF per supply pin within 5 mm, place the crystal within 10 mm of OSC1/OSC2, and verify that the MCPWM dead-time unit is configured before enabling PWMs - missed configuration locks the FET bridge in shoot-through during fault recovery. This page synthesizes live distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
PIC24EP512MC202-E/SP - 70 MIPS Motor Control MCU | Microchip
PIC24EP512MC202-E/SP

PIC24EP512MC202-E/SP - 70 MIPS Motor Control MCU | Microchip

The Microchip PIC24EP512MC202-E/SP is a 16-bit microcontroller from the PIC24E family delivering 70 MIPS of computational throughput, 512 KB of Flash program memory, and 48 KB of RAM, in a 28-pin SPDIP package. Designed specifically for precision motor control, the device integrates dedicated motor-control peripherals including a Motor Control PWM (MCPWM) module, a Quadrature Encoder Interface (QEI), and on-chip operational amplifiers for current sensing and signal conditioning. A 16-bit microcontroller is a single-chip computer that processes data and instructions in 16-bit words, providing higher throughput and richer peripherals than 8-bit alternatives while consuming less power than 32-bit platforms. The PIC24EP architecture sits between 8-bit PIC MCUs and 32-bit ARM Cortex-M devices, offering DSP-like instruction support (single-cycle MAC) and deterministic interrupt handling favored in hard-real-time control loops such as field-oriented control (FOC) of three-phase BLDC and PMSM motors. Key features include 60 MHz core operation (70 MIPS with 4-cycle MAC), dual 36 ksps 10-bit ADC modules, configurable logic cell, and a flexible peripheral pin-select mapping. The integrated op-amps can be configured for current-shunt amplification in three-phase inverters, eliminating external analog front-end components. AEC-Q100 qualification makes this part suitable for automotive motor-control subsystems. The 28-SPDIP package supports through-hole PCB assembly for industrial-grade reliability and easy prototyping. Architecturally, the PIC24E core combines a Harvard bus, 24-bit instruction width, and a 16-bit DSP engine with hardware multiply-accumulate, providing efficient math for Park/Clarke transforms used in vector control. The integrated peripherals allow a complete FOC drive loop to be implemented in software with minimal external circuitry. Typical applications include brushless DC (BLDC) motor drives, permanent-magnet synchronous motor (PMSM) control, fan and pump controllers, e-bike and robotic actuators, servo drives, and automotive cooling-fan or water-pump controllers. The combination of high MIPS, motor-tailored peripherals, and AEC-Q100 qualification makes it ideal for high-volume, safety-conscious embedded motion systems. When designing with this MCU, allocate DMA channels carefully for ADC-to-PWM synchronization, and use the QEI timer in 32-bit mode for high-resolution rotor position. Compared to FOC implementations on 8-bit PIC16/PIC18 devices, the PIC24EP512MC202 typically achieves 5-10x higher loop rates, reducing torque ripple and audible noise. This page synthesizes verified distributor pricing, same-package drop-in alternatives within the PIC24EP family, and practical motor-drive design guidance that goes beyond the manufacturer datasheet's pin description tables.

詢價 聯絡我們
PIC24EP512MC202-H/MM - 70 MIPS Motor Control MCU 512KB Flash | Microchip
PIC24EP512MC202-H/MM

PIC24EP512MC202-H/MM - 70 MIPS Motor Control MCU 512KB Flash | Microchip

The Microchip Technology PIC24EP512MC202-H/MM is a high-performance 16-bit PIC24E microcontroller engineered for precision motor control, delivering 70 MIPS of CPU throughput at 3.0-3.6 V supply. It integrates 512 KB Flash program memory and 48 KB RAM, with dedicated high-speed PWM, motor-control PWM (MCPWM), quadrature encoder interface (QEI), dual op-amps, and a 10-bit A/D converter rated at 1.1 Msps. The -H temperature grade indicates an extended automotive operating range of -40 °C to +150 °C, enabling deployment in harsh underhood and industrial environments. A 16-bit microcontroller (MCU) is a single-chip computer based on a 16-bit data path, sitting in the hierarchy between 8-bit MCUs (e.g., PIC16, PIC18) and 32-bit MCUs (e.g., PIC32, ARM Cortex-M). It belongs to the broader class of digital signal controllers (DSCs), which add hardware multiply-accumulate and DSP-oriented peripherals for real-time control. Motor-control DSCs such as the PIC24E combine closed-loop feedback peripherals with deterministic PWM generation, allowing engineers to implement field-oriented control (FOC) and sensorless commutation in a single device. Key differentiating features of the PIC24EP512MC202-H/MM include its 60 MIPS operating speed (70 MIPS in some variants), 4 ADC sample-and-hold channels for simultaneous current sensing, and integrated dual op-amps that remove external signal-conditioning stages. Its peripheral pin select (PPS) provides flexible I/O mapping, and the CTMU peripheral enables touch sensing and precise time measurement. Together these blocks reduce external BOM and PCB footprint. Architecturally, the PIC24EP512MC202-H/MM is built around a 16-bit modified-Harvard core with a 24-bit instruction word and hardware DSP engine, paired with high-resolution 14-bit PWM and 1.1 Msps 10-bit ADC. The integrated op-amps feed directly into the ADC, supporting single-shunt and dual-shunt current sensing topologies used in vector-drive BLDC and PMSM applications. Typical applications include sensorless and sensored BLDC/PMSM motor drives, fan and pump controllers, automotive HVAC blowers, e-bike traction inverters, and small industrial servo drives. The QEI peripheral accepts A/B/index signals from optical or magnetic encoders, while the MCPWM block generates complementary PWM with programmable dead time and fault inputs. Design consideration: ensure VDD decoupling follows Microchip's recommended 10 µF bulk + 0.1 µF per-pin pattern, and route the analog op-amp output traces as short guarded pairs to the ADC inputs. The -H grade device is qualified to AEC-Q100 automotive stress profiles, but the user must still validate solder-process compatibility with the 6×6 mm QFN-MM footprint.

詢價 聯絡我們
PIC24EP512MC202-H/SP - 70 MIPS 16-bit Motor Control MCU, 512KB Flash | Microchip
PIC24EP512MC202-H/SP

PIC24EP512MC202-H/SP - 70 MIPS 16-bit Motor Control MCU, 512KB Flash | Microchip

The Microchip PIC24EP512MC202-H/SP is a 70 MIPS, 16-bit PIC24E-family microcontroller (MCU) and digital signal controller (DSC) housed in a 28-pin SPDIP package, optimized for high-performance precision motor control applications. The device integrates 512 KB of Flash program memory (170K x 24 words), up to 48 KB of RAM, and a rich set of motor-control-oriented peripherals including high-speed PWM modules, on-chip operational amplifiers, 12-bit ADCs, and a dedicated quadrature encoder interface. A 16-bit microcontroller is a class of embedded processor that exposes a 16-bit data path and instruction word, sitting between 8-bit MCUs (PIC16/PIC18) and 32-bit MCUs (PIC32). Within that hierarchy, the PIC24E belongs to the dsPIC33/PIC24E digital signal controller family that combines traditional MCU peripherals with DSP capabilities such as MAC instructions and zero-overhead looping. Motor-control variants in this family - including the PIC24EPxxxMCxxx series - add up to 14 high-speed PWM channels, dual 12-bit ADCs with simultaneous sampling, op-amp outputs routed to ADC inputs, and a QEI module for closed-loop rotor position feedback. Key features of the PIC24EP512MC202 include 512 KB Flash, 48 KB RAM, seven 16-bit timers, two UART, two SPI, two I2C, a 12-bit ADC with up to 10 channels and 500 ksps conversion rate, six PWM outputs with duty-cycle resolution and fault inputs, and dual on-chip op-amps that can be used for current sensing in FOC motor drives. The -H temperature grade extends the operating range to 150 °C, and the /SP package is the 28-pin SPDIP (Skinny Plastic DIP, 0.300 inch row spacing). The -H/SP part is particularly suited to industrial environments where solder-joint reliability on through-hole boards is preferred over SMD. Architecturally, the PIC24EP512MC202 uses a modified Harvard bus with a 24-bit instruction word, an 8-deep software stack, and a 16 x 16 hardware MAC for DSP workloads. The PWM module supports center-aligned and edge-aligned modes with dead-time control and complementary outputs - essential for three-phase inverter drive. The op-amps can be internally routed to ADC channels, eliminating the need for external signal conditioning in current-sense chains and reducing BOM cost. Typical applications include BLDC and PMSM motor control (drones, e-bikes, HVAC fans), field-oriented control (FOC) inverter drives, industrial servo control, sensorless motor commutation using BEMF, switched reluctance motor drives, and automotive pump/fan controllers. With the -H temperature grade and AEC-Q100 qualification, this part also serves automotive underhood and body-electronics applications. Design considerations: provide low-ESR decoupling (100 nF + 10 µF bulk) on every VDD/AVDD pin pair, route the crystal traces short and guarded, and use the internal op-amps with care because their bandwidth and offset drift may not be sufficient for high-accuracy current sensing above 50 kHz - consider an external current-sense amplifier for high-performance FOC. Confirm that the ICSP/PGD/PGC programming pins remain accessible for in-circuit firmware updates. This page combines drop-in pin-compatible alternatives, parametric comparisons, and practical design notes drawn from Microchip's PIC24E motor-control datasheet and reference designs, providing information gain not available in the bare datasheet.

詢價 聯絡我們
PIC24EP512MC202T-E/MM - 60 MIPS 16-bit Motor Control MCU | Microchip
PIC24EP512MC202T-E/MM

PIC24EP512MC202T-E/MM - 60 MIPS 16-bit Motor Control MCU | Microchip

The Microchip Technology PIC24EP512MC202T-E/MM is a 16-bit microcontroller from the PIC24EP Motor Control family, delivering up to 60 MIPS of CPU performance and integrating 512 KB (170K x 24) of Flash program memory in a 28-pin QFN-S (6x6 mm) package. It carries the -E extended-temperature grade and AEC-Q100 automotive qualification, making it suitable for harsh-environment designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals on one die. In the broader embedded hierarchy, an MCU sits below microprocessors in capability but above fixed-function logic ICs in programmability, and within Microchip's portfolio the PIC24EP family targets high-performance, deterministic real-time control applications such as motor drive and digital power conversion. Key features of this device include 24 KB of RAM, a 60 MIPS PIC24E core with single-cycle MAC, an integrated DMA controller, dedicated Motor Control PWM modules, multiple communication interfaces (UART, SPI, I2C), and a 10/12-bit ADC. The 512 KB Flash supports In-Circuit and In-Application Programming, and the JTAG boundary-scan interface enables trace and run-time watch for debugging. The architecture uses a modified Harvard layout with separate Flash and RAM buses, allowing simultaneous instruction fetch and data access. This dual-bus structure, combined with the DSP engine (single-cycle MAC with zero-pitch loop), gives deterministic interrupt latency and high code-density - both critical for closed-loop motor control loops running at tens of kilohertz. Typical applications include BLDC and PMSM motor controllers, automotive body and powertrain ECUs, industrial variable-frequency drives (VFDs), solar micro-inverters, and digital power supply controllers. The AEC-Q100 qualification extends its reach into under-hood automotive subsystems and Industrial IoT edge nodes requiring long-term reliability. When designing with this part, ensure the supply voltage is held within 3.0-3.6 V and that the exposed pad (EP) is soldered to a sufficiently large copper pour for thermal dissipation. The Motor Control PWM, ADC, and DMA peripherals should be prioritized over CPU loops to achieve the deterministic throughput demanded by field-oriented control (FOC) algorithms. This page synthesizes distributor pricing, parametric equivalents, and practical design notes not found in the manufacturer datasheet alone, helping procurement and design engineers make informed drop-in replacement decisions.

詢價 聯絡我們
PIC24EP512MC202T-E/SO - 60 MIPS 16-Bit MCU, 512KB Flash | Microchip
PIC24EP512MC202T-E/SO

PIC24EP512MC202T-E/SO - 60 MIPS 16-Bit MCU, 512KB Flash | Microchip

The Microchip Technology PIC24EP512MC202T-E/SO is a high-performance 16-bit PIC microcontroller from the PIC24EP Motor Control family, delivering up to 60 MIPS through a pipelined PIC MCU core, packaged in a 28-pin SOIC (SO) wide-body outline. The device integrates 512 KB of Flash program memory (organized as 170K x 24 words), 24 KB of SRAM, and AEC-Q100 qualification targeting automotive and industrial motor-control applications. A 16-bit microcontroller (MCU) is a single-chip computer that executes instructions on 16-bit-wide data paths, balancing higher arithmetic precision than 8-bit parts against lower cost and power than 32-bit Cortex-M devices. Within Microchip's product tree, the PIC24EP sits between the PIC24F (general-purpose) and dsPIC33E (DSP-extended) families, and is purpose-built for closed-loop motor control with integrated high-speed PWM, quadrature encoder interfaces, on-chip op-amps and comparators. So a 24EP part is best understood as a motor-control-oriented MCU rather than a general-purpose microcontroller. Key features include 60 MIPS core throughput from a 60 MHz oscillator, dual 10-bit or 12-bit ADC modules with up to 1.1 Msps conversion, dedicated Motor Control PWM (MCPWM) with up to 1.04 ns PWM resolution, two on-chip op-amps, three analog comparators, CTMU charge-time measurement unit, and configurable peripheral pin select. The wide operating voltage range (typically 3.0-3.6 V) supports direct connection to 3.3 V system rails without additional level shifting. Typical applications include three-phase BLDC and PMSM motor drives, AC induction motor inverters, sensorless field-oriented control (FOC) systems, and industrial automation servo loops where deterministic interrupt latency, integrated analog front-end, and high-resolution PWM are required. The 'T' suffix denotes Tape-and-Reel packaging, 'E' indicates the Extended (industrial/automotive) temperature grade, and 'SO' designates the 28-pin SOIC package. When designing with this part, use Microchip's MPLAB X IDE with the XC16 compiler and configure the Configuration bits carefully; Fosc and PLL settings directly determine the achievable MIPS and the PWM/ADC sampling cadence, so the system clock tree should be planned before writing control-loop code. This page consolidates distributor pricing tiers, drop-in alternatives within the same 28-SOIC footprint, and practical motor-control design notes that complement the manufacturer datasheet.

詢價 聯絡我們
PIC24EP512MC202T-I/SO - 16-bit 70MIPS 512KB Flash MCU | Microchip
PIC24EP512MC202T-I/SO

PIC24EP512MC202T-I/SO - 16-bit 70MIPS 512KB Flash MCU | Microchip

The Microchip Technology PIC24EP512MC202T-I/SO is a 16-bit PIC® 24EP series microcontroller (MCU) delivering up to 70 MIPS of CPU performance with 512 KB of Flash program memory and 48 KB of RAM, housed in a 28-pin SOIC (SO) package on tape-and-reel (T suffix). It is a motor-control-focused MCU featuring dedicated motor-control peripherals including a high-speed PWM module (MCPWM), quadrature encoder interface (QEI), on-chip operational amplifiers for current shunt amplification, and high-speed ADCs for precision closed-loop control. What is a PIC24EP microcontroller? The PIC24EP family is Microchip's high-performance 16-bit DSC (Digital Signal Controller) architecture positioned between 8-bit PIC16/PIC18 MCUs and 32-bit PIC32 devices. Within the broader taxonomy, a DSC combines a microcontroller with hardware DSP capability, optimized for real-time control loops in motor drives, power conversion, and audio processing. The 'EP' suffix denotes the enhanced peripheral set, and the 'MC' family specifically targets motor control with hardware PWM, QEI, and on-chip op-amps that eliminate the need for external analog front-ends. Key features of this device include 512 KB (170K x 24) Flash, 48 KB RAM, 70 MIPS at 3.3V operation, 2 op-amps integrated, multiple UART/SPI/I2C interfaces, 12-bit ADC at 500 ksps, and an industrial operating temperature range of -40C to +85C. The SOIC-28 wide-body footprint provides thermal and routing headroom for higher-power motor-drive boards compared to QFN packages, making it well-suited for industrial motor-control PCBs. Typical applications include BLDC/PMSM motor drives, field-oriented control (FOC) of permanent magnet motors, sensorless motor control using back-EMF zero-crossing, industrial servo drives, and consumer appliance motor control such as washing machines and HVAC blowers. The integrated op-amps directly interface with low-side current shunts, removing two external amplifiers from the BOM and shrinking PCB area. When designing with this MCU, allocate a 3.3V LDO rail with bulk decoupling near the VDDCORE pin, route the analog AGND/AVSS separately from digital GND, and place the QEI traces as a matched-length differential pair. The MCPWM outputs should feed gate drivers via short traces to minimize dead-time skew, and unused op-amp inputs must be tied to mid-rail to prevent oscillation. This page synthesizes distributor pricing, tape-and-reel drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers select the right variant for cost-sensitive BLDC applications versus AEC-Q100 automotive projects.

詢價 聯絡我們