積體電路

子分類

📁 ADC/DAC 3,100+ 產品 📁 放大器 IC 1,700+ 產品 📁 音訊編解碼器 18 產品 📁 音訊 IC 2 產品 📁 時脈與計時 650+ 產品 📁 Comparator ICs 1 產品 📁 DSP 1,100+ 產品 📁 資料擷取 IC 2 產品 📁 數位電位器 4 產品 📁 顯示驅動器與控制器 1 產品 📁 FPGA 與 CPLD 7,100+ 產品 📁 介面 IC 3,100+ 產品 📁 LED 驅動器 1 產品 📁 邏輯 IC 450+ 產品 📁 記憶體 IC 870+ 產品 📁 微控制器 20,000+ 產品 📁 微處理器 4 產品 📁 馬達驅動器 1 產品 📁 其他 1 產品 📁 感測器與偵測器介面 1 產品 📁 特殊用途 IC 15 產品 📁 視訊 IC 13 產品

產品（38,000+)

STM32G031K4U6 - 64MHz Cortex-M0+ MCU | STMicroelectronics
STM32G031K4U6

STM32G031K4U6 - 64MHz Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32G031K4U6 is an ARM Cortex-M0+ 32-bit microcontroller operating at up to 64 MHz, with 16 KB of Flash memory, 8 KB of RAM, and a 32-pin UFQFPN 5 x 5 mm package. It is designed for compact mixed-signal and timer-driven control applications that require ADC, timer, PWM, USART, and general-purpose serial-interface resources in a compact surface-mount footprint. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals into one package. The STM32G0 series belongs to the broader embedded-processing hierarchy of Arm Cortex microcontrollers, embedded MCUs, and semiconductor devices. This combination makes the STM32G031K4U6 suitable for small control systems that must execute firmware, acquire analog measurements, generate precise timing signals, and exchange data with external controllers. The device provides 64 MHz processing performance, 16 KB of programmable Flash, 8 KB of SRAM, and an operating voltage range of 1.7 V to 3.6 V. Its listed peripherals include two USARTs, an ADC, timers, PWM capability, and communication interfaces. Two USART channels allow simultaneous serial connections to sensors, human-interface equipment, debug adapters, or another controller, while the ADC supports measurements required in analog control loops. The STM32G031K4U6 combines a 32-bit Arm Cortex-M0+ core with mixed-signal acquisition and timer-driven output functions. This architecture is appropriate for controls where deterministic timing, compact PCB area, and low-voltage operation are more important than a large memory capacity. Its 30 I/O positions provide connections for digital inputs, outputs, and mixed peripheral assignments, although the exact pin multiplexing must be checked against the manufacturer pin-definition data before PCB routing. Typical uses include motor and actuator control, temperature-sensing instruments, compact motor-drive modules, industrial monitoring nodes, and low-voltage embedded control boards. The ADC can supervise a sensor or power system, while timers and PWM channels can drive displays, indicators, relays, or small motors. Two USARTs are useful for a wired host interface combined with logging or external-sensor traffic. PCB design should preserve the low-voltage operating range of 1.7 V to 3.6 V and account for every power, ground, decoupling, programming, and reset connection in the manufacturer pinout. Place local bypass capacitance next to the supply pins, route sensitive analog inputs away from fast-switching nodes, and confirm signal levels before assigning communication interfaces. Firmware, bootloader, and peripheral configuration should also be reviewed for the selected temperature grade and package variant. This product page consolidates the verified electrical, memory, package, interface, and lifecycle information with practical application guidance, selection criteria, and qualified replacement comparisons. It is designed to help engineers evaluate the STM32G031K4U6 quickly while preserving the package, voltage, memory, and peripheral constraints that govern a safe PCB-level substitution.

詢價 聯絡我們
STM32G031K6T6 - 64MHz Cortex-M0+ MCU | STMicroelectronics
STM32G031K6T6

STM32G031K6T6 - 64MHz Cortex-M0+ MCU | STMicroelectronics

STMicroelectronics STM32G031K6T6 is a 32-bit Arm Cortex-M0+ microcontroller rated for up to 64 MHz, with 32 KB of embedded Flash memory, 8 KB of SRAM, and a 32-pin LQFP package measuring 7 x 7 mm. The STM32G0 series provides a compact microcontroller platform for cost-sensitive embedded control applications that require efficient processing, mixed-signal peripherals, and flexible low-power operation. A microcontroller is a semiconductor device that integrates a processor core, programmable memory, data memory, and peripherals on one package. In the STM32G0 product hierarchy, this device belongs to the Arm Cortex-M0+ class of 32-bit RISC microcontrollers and operates within the broader embedded-microcontroller and semiconductor categories. Its combination of 64 MHz processing performance and 32 KB Flash makes it suitable for compact control logic, sensor nodes, communication modules, and cost-sensitive consumer or industrial equipment. Verified product information identifies 32 KB of Flash, 8 KB of SRAM, two USART peripherals, and a maximum CPU frequency of 64 MHz. The STM32G031K6T6 is available in a 32-pin LQFP package, and distributor listings identify both 2.5 V and 3.3 V operating configurations. The supported supply range is listed as 1.7 V to 3.6 V. Two serial interfaces allow simultaneous debugging or external communications where system architecture and peripheral assignments permit. The Arm Cortex-M0+ core provides 32-bit processing while retaining the simple instruction set and low implementation complexity associated with Cortex-M devices. Its operating frequency of up to 64 MHz supports responsive control loops, protocol handling, and supervisory tasks without requiring a larger high-performance microcontroller package. The 8 KB SRAM provides working memory for real-time applications, while the 32 KB embedded Flash stores firmware, configuration data, and constant application data. Typical applications include industrial control modules, building automation endpoints, compact sensor nodes, consumer appliances, battery-powered accessories, and communications equipment. The MCU is especially useful when a board area of 7 x 7 mm is desirable but a high-end Cortex-M processor, large external memory interface, or complex graphics subsystem is unnecessary. Its USART resources can also support host-to-device links, programming interfaces, or field-bus transceiver connections. Designers should verify the complete pin assignment, peripheral multiplexing, clock configuration, and decoupling requirements against the official STM32G031K6 datasheet before layout release. A 1.7 V to 3.6 V supply must remain within the rated range, and firmware should be validated for startup, brownout behavior, and low-power transitions. Migration to a part with more Flash or RAM can also affect boot space, linker placement, and application layout. This page consolidates verified manufacturer and distributor information, honest drop-in replacement findings, package-level selection guidance, and practical design considerations. It distinguishes documented STM32G031 family options from unverified cross-brand substitutes so engineers can make a compatibility decision without assuming that equal package size alone guarantees a valid replacement.

詢價 聯絡我們
STM32G031K6U6 - 64MHz Cortex-M0+ 32KB MCU | STMicroelectronics
STM32G031K6U6

STM32G031K6U6 - 64MHz Cortex-M0+ 32KB MCU | STMicroelectronics

STMicroelectronics STM32G031K6U6 is an Arm Cortex-M0+ 32-bit microcontroller operating up to 64 MHz, with 32 KB Flash memory, 8 KB RAM, and a 32-pin UFQFPN 5 x 5 mm package. Its operating supply range is 1.7 V to 3.6 V, while the integrated peripheral set includes two USARTs, timers, an ADC, and communication interfaces. A microcontroller is a programmable semiconductor that combines a CPU core, memory, and peripherals in one integrated circuit. The STM32G0 family sits within the broader embedded-controller and power-management hierarchy. The Cortex-M0+ core uses a compact 32-bit RISC architecture intended for cost-sensitive embedded products, while the STM32G031K6U6 adds enough Flash and SRAM for control logic, serial communications, and modest real-time processing. The device operates at up to 64 MHz and includes 32 KB of Flash and 8 KB of RAM. Two USART interfaces support serial links to sensors, modules, human-interface equipment, and debug or programming accessories. The available timer and ADC resources make it suitable for converting analog measurements into digital control data, generating timing signals, and operating actuators. Its 32-pin UFQFPN package supports compact surface-mount designs. The STM32G031K6U6 uses an Arm Cortex-M0+ processor with 32-bit RISC characteristics and operates from a 1.7 V to 3.6 V supply. This combination provides useful processing performance without requiring a larger package or a more complex MCU architecture. The 8 KB SRAM is sufficient for control buffers and stack-intensive embedded routines, while the 32 KB Flash supports firmware, configuration data, and a boot program. Typical applications include compact industrial controllers, sensor-hub boards, serial data concentrators, LED-control systems, and small motor-control products. Two USARTs allow simultaneous connections to local modules or external instrumentation, while the ADC and timers support analog monitoring and deterministic timing tasks. The 5 x 5 mm package also helps reduce board area in densely populated embedded products. Designers should verify the exact pin multiplexing, debug interface, clock configuration, and peripheral electrical limits against the official STM32G031K6 datasheet before layout. Decoupling, exposed-pad implementation, boot configuration, and programming access are critical in a compact QFN design. Firmware migration should also be checked because equivalent-looking MCU order codes can differ in Flash size, temperature grade, or peripheral configuration. This page consolidates verified distributor pricing, manufacturer specifications, package details, drop-in family alternatives, and practical replacement guidance. It distinguishes confirmed STM32G031K6U6 data from parameters that still require confirmation from the manufacturer datasheet, helping engineers select, compare, and source the MCU with fewer procurement and design errors.

詢價 聯絡我們
STM32G031K8T3 - 64MHz Cortex-M0+ 64KB MCU | STMicroelectronics
STM32G031K8T3

STM32G031K8T3 - 64MHz Cortex-M0+ 64KB MCU | STMicroelectronics

The STMicroelectronics STM32G031K8T3 is a 32-bit Arm Cortex-M0+ microcontroller operating up to 64 MHz, with 64 KB of Flash memory, 8 KB of SRAM, and a 32-pin LQFP package measuring 7 mm by 7 mm. It is designed for compact embedded systems that require efficient control, communications, timing, and low-power peripheral support in a small surface-mount footprint. A microcontroller is a programmable integrated circuit containing a processor core, memory, and peripherals such as GPIO, timers, communication interfaces, and analog conversion blocks. The STM32G0 family is positioned as a mainstream embedded platform for cost-sensitive industrial, consumer, and instrumentation products. Its Cortex-M0+ architecture provides a 32-bit instruction set while maintaining an efficient design for control-oriented workloads. The STM32G031K8T3 combines a maximum operating frequency of 64 MHz with 64 KB of Flash for firmware storage and 8 KB of SRAM for working memory. The manufacturer describes the STM32G031x4, x6, and x8 devices as mainstream microcontrollers based on the Arm Cortex-M0+ core. The package configuration provides a practical option for designs requiring a moderate pin count and a conventional LQFP assembly process. Typical embedded applications include compact sensor controllers, small motor-control boards, industrial monitoring modules, consumer appliances, and low-cost communication equipment. The device is appropriate when the application needs more processing capability than a simple 8-bit controller but does not require the memory capacity or peripheral complexity of a higher-end Cortex-M processor. For PCB design, use the manufacturer pinout description when assigning the 32 LQFP connections and provide the required power, decoupling, ground, and programming interfaces according to the datasheet. Confirm the exact voltage limits, clock configuration, peripheral availability, and package pin definitions for STM32G031K8 variants before releasing a board layout. This page consolidates the manufacturer product information, package details, practical application guidance, and design considerations for engineers evaluating the STM32G031K8T3 as a compact 64 MHz Cortex-M0+ MCU.

詢價 聯絡我們
STM32G031K8T6 - 64MHz Cortex-M0+ 64KB MCU | STMicroelectronics
STM32G031K8T6

STM32G031K8T6 - 64MHz Cortex-M0+ 64KB MCU | STMicroelectronics

STMicroelectronics STM32G031K8T6 is a 32-bit Arm Cortex-M0+ microcontroller operating at up to 64 MHz, with 64 KB of embedded flash memory and 8 KB of SRAM. The device is supplied in a 32-pin LQFP package measuring 7 mm by 7 mm, making it suitable for compact embedded control boards, sensor nodes, industrial modules, and connected accessories. According to the STMicroelectronics STM32G031K8 product page, the STM32G031x4/x6/x8 mainstream family is built around a high-performance 32-bit Cortex-M0+ RISC core. A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, and peripheral interfaces into one package. In the product hierarchy, a microcontroller is an integrated circuit and semiconductor device; within an embedded system, it executes firmware, reads inputs, controls outputs, and connects the application to sensors, communications equipment, and actuators. The Cortex-M0+ architecture therefore provides the computational foundation rather than acting merely as a fixed-function interface controller. The STM32G031K8T6 combines a 64 MHz operating frequency with 64 KB of flash and 8 KB of SRAM. Its 32-bit instruction set supports efficient control workloads while its relatively small memory footprint suits compact systems. The 32-LQFP 7 mm by 7 mm package provides a conventional leaded footprint that can simplify assembly and prototype inspection compared with a very small fine-pitch package. The available verified listings also describe the part as an active embedded microcontroller. The exact peripheral mix, voltage range, temperature ratings, timers, communication interfaces, analog features, and programming details are not present in the supplied verified excerpts. Those values are therefore not inferred or fabricated here. This page concentrates on confirmed identity and capacity information: Cortex-M0+ core, 32-bit architecture, 64 MHz maximum frequency, 64 KB flash, 8 KB RAM, and 32-LQFP 7 mm by 7 mm packaging. The MCU is appropriate for small embedded controllers whose firmware fits within 64 KB and whose working data fits within 8 KB. Potential roles include building controls, compact industrial interfaces, low-cost sensor nodes, accessory controllers, and compact consumer devices. Final peripheral suitability should be confirmed against the complete manufacturer datasheet and the pin configuration for the 32-pin package before schematic or PCB release. The primary design consideration is package and pinout verification. A shared package name alone does not guarantee that every peripheral signal is assigned identically between MCU variants. Engineers should compare power pins, ground pins, debug signals, boot configuration pins, and every used peripheral signal against the manufacturer package diagram. The 32-LQFP footprint also requires adequate copper and assembly clearance around its leaded package. This page combines verified manufacturer identity, distributor specifications, source links, package facts, and careful replacement guidance. It also distinguishes documented drop-in candidates from related devices that require pinout, firmware, and peripheral-level verification, providing practical context beyond a distributor title or basic catalog listing.

詢價 聯絡我們
STM32G031K8T7 - 64MHz Cortex-M0+ MCU | STMicroelectronics
STM32G031K8T7

STM32G031K8T7 - 64MHz Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32G031K8T7 is a 32-bit Arm Cortex-M0+ microcontroller operating up to 64 MHz, with 64 KB of flash memory, 8 KB of RAM, and 30 general-purpose I/O pins in a 32-LQFP package. It combines a compact embedded processing core with mixed-signal and timer-oriented peripherals for cost-sensitive industrial, consumer, and control applications. A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, volatile data memory, and peripherals into one device. The STM32G0 family belongs to the hierarchy of embedded MCU, 32-bit RISC processor, and programmable semiconductor. Its Cortex-M0+ architecture supports efficient event-driven control while providing a broad peripheral set without requiring a separate processor, memory, and interface devices. The principal specifications of the STM32G031K8T7 include a 64 MHz maximum operating frequency, 64 KB of flash program memory, 8 KB of SRAM, and 30 I/O pins. The device also supports I2C, IrDA, LINbus, SPI, UART/USART, and I2S communication, along with DMA, PWM, watchdog, brown-out detection, and power-on-reset functions. These resources make it suitable for mixed-signal products that need timer-driven control and several serial interfaces on a compact board. The Cortex-M0+ core provides a 32-bit instruction set with a compact instruction footprint, helping designers balance performance, memory use, and power consumption. Direct-memory-access support allows transfers to occur without placing every data movement on the CPU. PWM and general-purpose timer resources suit motor, lighting, and actuator control, while I2C, SPI, UART/USART, and I2S interfaces cover sensors, displays, converters, and digital audio links. Typical uses include sensor-hub and IoT control boards, compact motor controllers, LED lighting controllers, industrial monitoring equipment, digital-audio interfaces, and low-cost embedded consumer products. In each case, the 64 MHz processing rate supports responsive control loops, while the 32-LQFP package provides 32 physical pins for power, ground, clocking, communications, and general-purpose signals. PCB planning should begin with the package pinout and the STM32G0 reference manual. Confirm the supported supply range, clock configuration, boot options, and every peripheral pin before schematic capture. Place decoupling capacitors close to the supply pins, route sensitive analog and clock connections away from fast-switching nodes, and program unused pins in accordance with the manufacturer guidance rather than treating their state as inherently safe. This product record combines the STMicroelectronics device specifications with cross-reference guidance for same-family alternatives, practical application positioning, and design-focused selection criteria. It is intended to accelerate engineering review while keeping package, memory, interface, and replacement decisions traceable to the manufacturer and component records.

詢價 聯絡我們
STM32G031K8U6 - 64MHz Cortex-M0+ 64KB MCU | STMicroelectronics
STM32G031K8U6

STM32G031K8U6 - 64MHz Cortex-M0+ 64KB MCU | STMicroelectronics

STMicroelectronics STM32G031K8U6 is an Arm Cortex-M0+ 32-bit STM32G0 series microcontroller operating up to 64 MHz, with 64 KB of Flash memory and 8 KB of SRAM, in a 32-pin UFQFPN package measuring 5 x 5 mm. It targets compact embedded-control designs requiring efficient processing, serial connectivity, timers, and analog peripherals without the resource demand of a larger microcontroller. A microcontroller is a programmable integrated circuit containing a processor core, memory, and peripherals on one device. STM32G0 belongs to the embedded processor and microcontroller hierarchy, where the Arm Cortex-M0+ core executes compact control firmware, Flash retains program code, SRAM supports working data, and integrated peripherals reduce the component count required for sensing, communication, timing, and actuator control. The verified product information identifies a 64 MHz Arm Cortex-M0+ core, 64 KB Flash organized as 64K x 8 bits, 8 KB SRAM, and a 32-pin UFQFPN package. The listed interface set includes two USART peripherals. Related family documentation also identifies I2C, SPI, IrDA, and LIN connectivity, DMA, brown-out detection and reset, PWM, a watchdog timer, and hardware SRAM parity checking, subject to the exact device variant and pin availability. STM32G031K8U6 is positioned for cost-sensitive embedded systems where a 64 MHz core provides useful performance headroom while retaining 64 KB of nonvolatile program storage. Its compact 5 x 5 mm land pattern supports space-constrained boards, and the mixture of serial interfaces, timing peripherals, and analog functions makes it suitable for sensor hubs, building controls, appliance controllers, and compact automation modules. Typical designs place the MCU beside sensors and power-conversion circuitry, using its serial interfaces for external converters, displays, or network modules. Firmware must be built and programmed through a supported Arm/ST development environment. Before hardware release, engineers should verify the exact pin multiplexing, peripheral limits, clock tree, and electrical constraints against the official STM32G031K8 documentation. The principal design consideration is not simply matching the 5 x 5 mm footprint but confirming device-level compatibility. Firmware, package pinout, supply voltage, peripheral configuration, and all used I/O assignments must align with the replacement. This page distinguishes verified STM32G0 family options from parts with different package, memory, or peripheral configurations. This page combines exact distributor and manufacturer identifiers, verified memory and core specifications, package information, commercial availability references, and application-focused engineering guidance. It also documents the shortage of independently verified, pin-compatible drop-in replacements rather than presenting electrically similar MCUs as drop-in substitutes.

詢價 聯絡我們
STM32G031K8U7 - 64MHz Cortex-M0+ MCU | STMicroelectronics
STM32G031K8U7

STM32G031K8U7 - 64MHz Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32G031K8U7 is a 32-bit ARM Cortex-M0+ microcontroller operating at up to 64 MHz, with 64 KB of embedded Flash memory, 8 KB of SRAM, and a 32-pin UFQFPN package measuring 5 x 5 mm. It belongs to the STM32G0 mainstream microcontroller family and combines a compact package with general-purpose embedded processing and analog peripherals. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one integrated circuit. Within the product hierarchy, the STM32G031K8U7 is an ARM Cortex-M0+ microcontroller, an embedded processor, and a compact system-on-chip for control-oriented products. Its 32-bit architecture supports efficient instruction execution while its small package and memory configuration suit cost-sensitive, space-constrained designs. The principal device characteristics are a maximum 64 MHz core frequency, 64 KB of Flash, and 8 KB of SRAM. The STM32G031K8 family supports operating-temperature options from -40°C to 85°C, 105°C, or 125°C, depending on the selected ordering variant. Its compact 5 x 5 mm UFQFPN package also supports surface-mount manufacturing and reduces PCB area compared with larger leaded packages. The Cortex-M0+ core provides a practical balance of processing capability, efficiency, and implementation complexity. Flash memory retains firmware when the device is unpowered, while SRAM supports working data and stack operations. The family is designed for applications requiring compact control logic and efficient embedded processing without the memory scale of a higher-end Cortex-M application processor. Typical applications include compact sensor controllers, building and industrial automation modules, battery-powered monitoring equipment, appliance controls, and low-cost USB-enabled accessories. The small package is especially useful when the PCB area around the MCU is constrained but manufacturing still requires a conventional surface-mount assembly process. Designers should confirm the complete pin assignment, exposed-pad connection, decoupling requirements, and peripheral availability against the STM32G031K8 datasheet before layout release. The UFQFPN thermal pad must be connected according to the device's recommended land pattern and thermal strategy, while unused GPIO and supply pins should follow the stated input and termination requirements. This page combines the verified STM32G031K8U7 device identity, manufacturer documentation, pin and package information, practical application guidance, and a parameter-by-parameter comparison with close same-family alternatives. It is intended to accelerate engineering selection while keeping PCB compatibility and firmware constraints visible.

詢價 聯絡我們
STM32G041C6T6 - 64MHz Cortex-M0+ MCU | STMicroelectronics
STM32G041C6T6

STM32G041C6T6 - 64MHz Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32G041C6T6 is a 32-bit ARM Cortex-M0+ microcontroller rated at up to 64 MHz, with 32 KB of internal Flash memory and a 48-LQFP package measuring 7 mm by 7 mm. It belongs to the STM32G0 mainstream microcontroller family, combining a compact general-purpose MCU architecture with mixed-signal acquisition capability for compact embedded products. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one device. The STM32G0 family sits within the hierarchy of embedded microcontroller, 32-bit processor, ARM Cortex-M processor, and general-purpose semiconductor. This positioning makes the STM32G041C6T6 suitable for cost-sensitive control systems that require more processing capability than an 8-bit MCU while retaining a conventional surface-mount footprint. The device runs at up to 64 MHz and provides 32 KB of Flash for program storage. Its 48-LQFP package provides 48 accessible pins in a 7 mm by 7 mm surface-mount outline, supporting integration with external sensors, communication transceivers, memory, regulators, and discrete interface circuitry. The STM32G041C6T6 is identified specifically as a mixed-signal sensor-acquisition MCU, making signal conditioning and embedded measurement central to its application profile. The Arm Cortex-M0+ core uses a reduced instruction set optimized for efficient embedded control while providing the software ecosystem associated with ARM Cortex-M devices. Peripheral configuration, clocking, interrupt handling, and low-power behavior are managed through the STM32G0 device architecture. Firmware can be developed using the STM32 embedded software environment and configured through supported graphical or C-language development workflows. Typical applications include compact industrial sensors, digital measurement instruments, low-cost control boards, connected sensor nodes, and embedded condition-monitoring systems. The MCU is particularly appropriate when an acquisition task, control loop, and communication function must share one compact device. Designers should account for the exact peripheral mix, RAM capacity, electrical limits, and clock configuration when assigning production firmware. For a new PCB, follow the STMicroelectronics STM32G041C6T6 datasheet for the complete pin-description table, exposed-pad requirements, decoupling recommendations, clock limits, and programming connections. Confirm the required trace, reset, boot, and interface assignments against the final schematic before layout release. This product page combines the manufacturer's key device facts, application-specific engineering context, drop-in family options, and practical design guidance to support faster component selection, schematic review, and sourcing decisions.

詢價 聯絡我們
STM32G041C8T6 - 64MHz Cortex-M0+ 64KB MCU | STMicroelectronics
STM32G041C8T6

STM32G041C8T6 - 64MHz Cortex-M0+ 64KB MCU | STMicroelectronics

The STMicroelectronics STM32G041C8T6 is an Arm Cortex-M0+ 32-bit microcontroller operating up to 64 MHz, with 64 KB of Flash memory and 8 KB of RAM, housed in a 48-LQFP 7 x 7 mm package. It belongs to the STM32G0 mainstream MCU family and targets compact embedded-control, analog, communications, and security-assisted designs. The verified distributor listing also identifies 2 USART interfaces and a 1.7 V to 3.6 V supply range. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and communication interfaces on one integrated circuit. In the device hierarchy, an MCU is a semiconductor and embedded-control IC; the STM32G0 family combines general-purpose processing with analog and digital peripherals for compact control boards, sensors, actuators, and communication equipment. The STM32G041C8T6 combines a 64 MHz Cortex-M0+ core with 64 KB Flash and 8 KB RAM. Its 1.7 V to 3.6 V operating supply supports low-voltage embedded systems, while the listed 2 USARTs provide serial connectivity for debugging, module integration, or peripheral communication. The family description specifically associates STM32G041x6/x8 devices with mainstream embedded applications, making this part appropriate for compact control logic where performance and integration matter. The STM32G0 architecture uses a 32-bit RISC core designed for efficient embedded execution. Flash retains programmed firmware after power removal, while RAM supports working data and execution state. This division allows the MCU to operate as a self-contained controller without requiring external program memory. Exact peripheral inventories, pin multiplexing, clock limits under each voltage range, and performance figures beyond the verified values are not inferred here. Typical applications include low-voltage sensor nodes, compact motor-control peripherals, industrial control modules, communication bridges, and embedded instruments. Two USARTs can support a host interface and an external module, while the 64 KB Flash capacity provides room for application firmware and boot logic. The 48-LQFP package is appropriate for through-hole assembly and manual prototyping where a fine-pitch BGA would be inconvenient. Designers should use the manufacturer datasheet for the exact 48-pin map, alternate-function assignments, decoupling requirements, clock configuration, and programming procedure. Because the package is relatively large and exposed to handling and soldering challenges, verify PCB footprint, pin orientation, and assembly capability before committing to a board. Firmware migration should also be reviewed rather than assuming software compatibility from the family name alone. This page consolidates verified manufacturer and distributor facts, separates verified values from missing parameters, and emphasizes procurement, application, and design context. It does not invent unprovided electrical details, pricing tiers, pin assignments, lifecycle claims, or drop-in alternatives; those items remain explicitly qualified for engineering validation.

詢價 聯絡我們
STM32G041F6P6 - 64MHz Cortex-M0+ MCU | STMicroelectronics
STM32G041F6P6

STM32G041F6P6 - 64MHz Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32G041F6P6 is a 32-bit Arm Cortex-M0+ microcontroller operating up to 64 MHz, with 32 KB of Flash memory, 8 KB of RAM, and a 20-pin TSSOP package. It supports a 1.7 V to 3.6 V operating voltage range and includes two USART peripherals, timers, an ADC, communication interfaces, and AES-256 hardware encryption. The STM32G041F6P6 is positioned for compact, cost-sensitive embedded systems where a small package and low-voltage operation are important. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces on one device. The STM32G041F6P6 belongs to the STM32G0 mainstream family and uses the Arm Cortex-M0+ architecture, a 32-bit RISC core designed for energy-efficient control applications. Its role in the broader hierarchy is embedded controller → microcontroller → Arm Cortex-M0+ MCU, where the integrated peripherals reduce the need for external components in control, sensing, and communications products. Key features include a maximum 64 MHz operating frequency, 32 KB of Flash memory, and 8 KB of RAM. Two USART peripherals support serial communication, while the integrated ADC supports analog measurement functions. AES-256 hardware encryption provides a dedicated cryptographic capability without requiring a general-purpose software implementation. The 1.7 V to 3.6 V supply range allows operation from common low-voltage rails, and the TSSOP-20 package supports compact, surface-mount PCB layouts. The Arm Cortex-M0+ core provides a straightforward exception-based architecture and efficient instruction execution for embedded workloads. Flash memory retains programmed firmware, while RAM supports stack, variables, and working data. The combination of two USARTs, an ADC, timers, and communication interfaces permits one MCU to consolidate several common peripheral functions, reducing board area and simplifying firmware design in small industrial, consumer, and communications equipment. Typical applications include compact sensor controllers, serial data concentrators, industrial monitoring nodes, battery-powered instruments, and small communication modules. The STM32G041F6P6 is particularly appropriate when the design needs two serial channels, analog measurement, encrypted data handling, and a 64 MHz control loop without requiring a larger microcontroller package. Its low-voltage supply range also fits systems powered by regulated 3.3 V rails or compatible low-energy power sources. Designers should verify the complete pin assignment, exposed electrical limits, clock configuration, and peripheral allocation against the manufacturer datasheet before layout release. Decoupling, programming access, reset behavior, and analog-input conditioning remain essential integration details. Because the supplied data does not include a verified pin table, no pin names are inferred in this record, and a footprint-only substitution should not be assumed to be functionally identical. This page combines verified manufacturer and distributor information, explicit data gaps, application-oriented design guidance, and same-brand drop-in candidates for engineering review. It distinguishes confirmed STM32G041F6P6 attributes from alternatives that require datasheet-level pin, memory, peripheral, and firmware validation before production use.

詢價 聯絡我們
STM32G041F8P6 - 64MHz ARM Cortex-M0+ MCU | STMicroelectronics
STM32G041F8P6

STM32G041F8P6 - 64MHz ARM Cortex-M0+ MCU | STMicroelectronics

The STM32G041F8P6 is a 32-bit ARM Cortex-M0+ microcontroller from STMicroelectronics, operating at up to 64 MHz with 32 KB of flash memory and 8 KB of SRAM. It is housed in a 20-pin TSSOP package, offering a compact solution for cost-sensitive and space-constrained applications. The device integrates a rich set of peripherals including a 12-bit ADC, multiple timers, I2C, SPI, USART, and a low-power RTC, making it suitable for a wide range of embedded control tasks. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the backbone of modern electronics, found in everything from automotive engine control units to consumer appliances and IoT devices. The STM32G0 series sits within the broader STM32 family, which is a leading ARM Cortex-M based MCU portfolio, and is positioned as an entry-level, high-efficiency option for applications requiring low power and high integration. Key features of the STM32G041F8P6 include a 64 MHz ARM Cortex-M0+ core with memory protection unit (MPU), 32 KB flash, 8 KB SRAM, and a comprehensive set of peripherals. It supports a supply voltage range of 1.7V to 3.6V, with an operating temperature range of -40°C to +85°C. The device includes a 12-bit ADC with up to 19 channels, a 12-bit DAC, multiple 16-bit timers, and a low-power UART. It also features a hardware random number generator (RNG) and a cyclic redundancy check (CRC) unit, enhancing security and data integrity for industrial and IoT applications. Technically, the STM32G041F8P6 is built on a 90nm process technology, offering a balance between performance and power consumption. It supports multiple low-power modes, including Sleep, Stop, and Standby, with a typical standby current of 0.3 µA, making it ideal for battery-powered devices. The device also includes a high-speed internal oscillator (HSI) that can be calibrated to achieve ±1% accuracy, reducing the need for external crystals in many applications. Typical applications include industrial sensors, smart home devices, portable medical monitors, and motor control systems. Its rich analog peripherals and low-power capabilities make it particularly well-suited for sensor interfacing and data acquisition. The compact TSSOP-20 package allows for minimal PCB footprint, enabling high-density designs. When designing with this MCU, ensure proper decoupling of the VDD pins with 100nF capacitors placed close to the device. For applications requiring precise timing, use the external crystal oscillator (HSE) or calibrate the internal HSI. The device supports in-circuit programming and debugging via SWD, simplifying firmware development.

詢價 聯絡我們
STM32G041G6U6 - 64MHz Cortex-M0+ MCU | STMicroelectronics
STM32G041G6U6

STM32G041G6U6 - 64MHz Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32G041G6U6 is a 32-bit Arm Cortex-M0+ microcontroller operating up to 64 MHz, with 32 KB of Flash program memory, 8 KB of RAM, and 28 I/O pins in a 28-pin UFQFPN package. It operates from 1.7 V to 3.6 V and combines a compact embedded-control footprint with two USART interfaces, timers, an ADC, communication interfaces, AES-256 encryption, and a random-number generator. A microcontroller is a programmable integrated circuit that combines a processor core, memory, peripherals, and communication interfaces on one package. The STM32G0 family belongs to the broader Arm Cortex-M microcontroller hierarchy, where Cortex-M0+ provides an efficient 32-bit architecture for cost-sensitive embedded control. The STM32G041G6U6 is positioned for compact motor-control, sensing, consumer-equipment, and general-purpose automation designs that require more capability than a basic 8-bit controller without adopting a larger application processor. The 64 MHz Cortex-M0+ core supports deterministic control tasks while the 32 KB Flash and 8 KB RAM provide room for firmware and working data. Two USARTs allow connection to sensors, human-interface devices, external transceivers, or service interfaces. The integrated analog and timing resources support signal acquisition, pulse-width modulation, motor control, and periodic system functions. AES-256 and the random-number generator add hardware-oriented resources for products that need basic data protection or randomized security operations. The STM32G041x6/x8 device family is built around STMicroelectronics' STM32G0 architecture and provides a practical combination of processing speed, memory, serial connectivity, analog conversion, and security functions. The 1.7 V minimum operating voltage supports low-voltage embedded systems, while the 3.6 V maximum rating keeps the device compatible with common 3.3 V system rails. The 28-pin UFQFPN format also allows a smaller assembled footprint than many leaded or larger multi-row microcontroller packages. Typical uses include compact motor controllers, digital potentiometer and sensor systems, household appliances, communication modules, LED-control boards, and industrial control products. Two serial interfaces make it especially useful where a design must bridge a local sensor or actuator network while the Cortex-M0+ core performs control processing. Its combination of timers, ADC capability, and security resources also suits compact control nodes that need more than basic digital I/O. The primary design consideration is footprint-aware firmware and board planning. Confirm the exposed-pad connection, pin multiplexing, decoupling requirements, clock setup, and peripheral assignments against the manufacturer datasheet and reference manual. Use the same 4 x 4 mm package only when the candidate device has matching voltage, memory, peripheral, pin, and exposed-pad requirements. MCU interchangeability depends on more than a shared package because bootloader behavior, peripheral mapping, clock limits, and software support can differ. This product record combines manufacturer-device specifications, package information, interface details, application guidance, and an engineering-focused comparison framework. It also distinguishes documented device capabilities from unknown assembly details, helping designers evaluate the STM32G041G6U6 without treating a package match as proof of complete software and hardware equivalence.

詢價 聯絡我們
STM32G041G8U6 - 64MHz Cortex-M0+ MCU | STMicroelectronics
STM32G041G8U6

STM32G041G8U6 - 64MHz Cortex-M0+ MCU | STMicroelectronics

STMicroelectronics STM32G041G8U6 is a 32-bit Arm Cortex-M0+ microcontroller with a 64 MHz operating frequency, 64 KB of Flash memory, and 8 KB of SRAM in a 28-pin UFQFPN package measuring 4 x 4 mm. It belongs to the STM32G0 family of low-power embedded microcontrollers and targets compact consumer, industrial, sensor, and control applications. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripheral interfaces, and power-management circuitry on one package. In the product hierarchy, the STM32G041G8U6 is an MCU, an embedded controller, and a member of the STM32G0 family of 32-bit Arm Cortex-M0+ devices. This integration reduces the component count required for small control systems while supporting digital communication, timing, analog input, and general-purpose I/O. The device combines a 64 MHz Arm Cortex-M0+ processor with 64 KB of Flash and 8 KB of SRAM. Its operating voltage range is 1.7 V to 3.6 V, supporting low-voltage embedded systems. The compact 28-pin UFQFPN package is suitable for space-constrained products, while the manufacturer’s STM32 ecosystem provides a consistent development path for firmware, peripherals, and board-level evaluation. The STM32G0 architecture emphasizes efficient processing in an entry-level 32-bit MCU platform. Flash memory provides nonvolatile program storage, while the 8 KB SRAM provides working memory for stack operations, variables, and interrupt servicing. The 64 MHz clock rate gives designers more scheduling headroom than slower general-purpose 8-bit controllers without moving to a more complex high-performance MCU class. Typical uses include low-power sensor nodes, compact motor and relay controllers, building automation endpoints, household appliances, instrumentation, and small industrial control boards. The small footprint is particularly useful when the design must fit into a compact sensor enclosure or densely populated control PCB while retaining a 32-bit software ecosystem. Designers should use the manufacturer’s pin and package documentation to assign all 28 pins, preserve the exposed-pad land pattern, and select decoupling capacitors for the device-specific power requirements. Firmware migration and PCB reuse should be evaluated against the complete electrical, pinout, peripheral, and lifecycle documentation rather than processor frequency alone. This product page combines the manufacturer specifications, package information, sourcing guidance, and engineering-focused design considerations into a concise selection reference for teams evaluating the STM32G041G8U6 for compact embedded systems.

詢價 聯絡我們
STM32G041J6M6 - 64MHz 32-bit MCU | STMicroelectronics
STM32G041J6M6

STM32G041J6M6 - 64MHz 32-bit MCU | STMicroelectronics

The STMicroelectronics STM32G041J6M6 is a 32-bit ARM Cortex-M0+ microcontroller operating at up to 64 MHz, with 32 KB of Flash memory, 8 KB of SRAM, and an 8-pin SOIC package. It operates from 1.7 V to 3.6 V and provides two USART interfaces, an ADC, timers, communication interfaces, and AES-256 hardware encryption in a compact 8-SO configuration. A microcontroller is an integrated semiconductor that combines a processor core, memory, and peripherals on one device. The STM32G0 family belongs to the Arm Cortex-M0+ microcontroller hierarchy and is designed for cost-sensitive embedded control. Typical system functions include reading sensors, controlling actuators, managing communications, and executing real-time control logic while using very little board area. The principal benefits of the STM32G041J6M6 include its 64 MHz processing rate, 32 KB of embedded Flash for firmware, and 8 KB of SRAM for working memory. Two USART peripherals support serial communication, while the listed ADC and timer resources cover analog measurement and periodic event generation. AES-256 acceleration adds hardware support for protecting data without placing encryption routines on the general-purpose processor. The Cortex-M0+ architecture uses a 32-bit RISC design with a compact instruction set suited to embedded applications. With fewer external components than a discrete processor design, the device can simplify both board layout and firmware development. Its operating range of 1.7 V to 3.6 V supports common low-voltage embedded systems, although each external peripheral and interface must also satisfy the device's complete electrical limits. The STM32G041J6M6 is suitable for compact sensor nodes, industrial control modules, communication equipment, and low-power monitoring products. Two USARTs allow connection to local sensors or transceivers, the ADC supports analog inputs, and the timer block can provide timing functions for control loops. The 8-pin package is especially useful where PCB area and component count are tightly constrained. Designers should verify every pin function in the STM32G041J6 package pinout before assigning analog inputs, debug functions, or communication signals. On packages without a VREF+ pin, the STMicroelectronics datasheet states that VREF+ is internally connected to VDD and the internal voltage-reference buffer must remain disabled. Decoupling, programming access, clock configuration, and unused-pin treatment should follow the manufacturer's recommended layouts. This product page consolidates the core electrical specifications, package information, interface resources, drop-in alternatives, application guidance, and practical design considerations into one engineering reference. It is intended to help engineers evaluate the STM32G041J6M6 for compact embedded-control designs before completing footprint, firmware, and qualification checks.

詢價 聯絡我們
STM32G041K6T6 - 64MHz Cortex-M0+ 32KB MCU | STMicroelectronics
STM32G041K6T6

STM32G041K6T6 - 64MHz Cortex-M0+ 32KB MCU | STMicroelectronics

STMicroelectronics STM32G041K6T6 is a 32-bit ARM Cortex-M0+ microcontroller with a 64 MHz CPU, 32 KB of Flash memory, 8 KB of SRAM, and a 32-pin LQFP package. It operates from a 1.7 V to 3.6 V supply and integrates communication, analog, timing, and security functions for compact embedded systems. A microcontroller is the central programmable component of an embedded system, combining a processor core, nonvolatile program memory, volatile data memory, and peripherals on one semiconductor die. The STM32G041 belongs to the STM32G0 family, a low-power Arm Cortex-M0+ product hierarchy positioned for cost-sensitive, high-volume control and IoT applications. Its low operating-voltage range also supports energy-conscious designs using standard low-voltage supply rails. Key features include a 64 MHz Arm Cortex-M0+ core, 32 KB of Flash, 8 KB of SRAM, two USART peripherals, a 12-bit ADC, and AES-256 hardware encryption. These resources support serial-connected sensors, compact user interfaces, motor-control monitoring, and secure device communication. The 32-pin LQFP package provides enough I/O for external transceivers, analog inputs, programming access, and mixed-signal peripherals while remaining compatible with conventional leaded-assembly processes. The STM32G0 architecture emphasizes efficient embedded processing while retaining familiar Arm Cortex-M programming conventions. Its clocking and peripheral resources support designs that balance responsiveness with low power, while the integrated analog and communications blocks reduce the need for external components. The 1.7 V to 3.6 V operating range makes the device suitable for 1.8 V, 2.5 V, and 3.3 V system rails, provided each selected external component shares the appropriate voltage tolerance. Typical applications include IoT sensor nodes, digital thermometers, compact motor controllers, building-control modules, communication transceivers, and low-power consumer products. A two-USART configuration is useful for local debugging or connecting a wireless module, while the ADC supports battery, temperature, or analog-sensor monitoring. The AES-256 accelerator can improve cryptographic throughput when a connected product requires hardware-assisted encryption. Designers should verify pin multiplexing, peripheral conflicts, clock-tree requirements, and decoupling using the manufacturer datasheet before PCB release. The 32-pin LQFP footprint simplifies hand soldering and automated through-hole assembly, but exposed thermal performance still depends on copper routing, airflow, and the selected power dissipation profile. This product page combines exact device specifications, practical application guidance, verified sourcing links, and same-family drop-in alternatives to support component selection, schematic design, PCB planning, and procurement review.

詢價 聯絡我們
STM32G041K8T6 - 64MHz Cortex-M0+ 64KB MCU | STMicroelectronics
STM32G041K8T6

STM32G041K8T6 - 64MHz Cortex-M0+ 64KB MCU | STMicroelectronics

STMicroelectronics STM32G041K8T6 is a 32-bit Arm Cortex-M0+ microcontroller operating up to 64 MHz, with 64 KB of Flash memory, 8 KB of RAM, and a 32-LQFP 7 x 7 mm package. It combines general-purpose embedded processing with mixed-signal and timer-driven control functions, making it suitable for compact industrial, consumer, sensor, and motor-control systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32G0 family sits within the broader hierarchy of embedded processor, microcontroller, and semiconductor products. Instead of relying on a discrete processor and separate interface chips, an STM32 device executes firmware, measures analog signals, controls timers and PWM outputs, and manages communications on a single integrated platform. The STM32G041K8T6 features a 32-bit Arm Cortex-M0+ core, 64 KB of Flash for program storage, and 8 KB of RAM for runtime data. Its mixed-signal and timer-driven control positioning supports applications that need both digital processing and peripheral control. The 12-bit ADC capability and 30-channel indication associated with this device family suit sensor acquisition, while timer and PWM resources support motor, valve, lighting, and industrial actuator tasks. The 64 MHz operating frequency provides a practical balance between processing throughput and power-conscious embedded control. Firmware can combine communication handling, control-loop execution, and peripheral servicing in one MCU. The 32-LQFP package provides 32 accessible peripheral pins and supports conventional surface-mount assembly, making the device practical for designs that need substantial I/O without moving to a very fine-pitch package. Typical uses include compact motor controllers, digital potentiometer and dimming systems, sensor-interface nodes, small appliances, and embedded control boards. In a motor-control design, the MCU can evaluate sensor inputs, execute a control algorithm, and generate timer-controlled PWM outputs. In a sensor node, it can acquire analog measurements, condition the data in firmware, and forward results through an available serial interface. When laying out a board, place decoupling capacitors close to the supply pins and reserve programming and debug access for the Cortex-M0+ ecosystem. Confirm every peripheral pin assignment against the manufacturer pin table before routing the PCB, especially because firmware configuration, alternate functions, and board-level signal integrity determine real-world performance. This page combines the confirmed STM32G041K8T6 specifications, same-footprint family alternatives, application guidance, and engineering checks that support faster component selection and board design. Each replacement still requires firmware, peripheral, timing, and lifecycle review before production use.

詢價 聯絡我們
STM32G041K8U6 - 64MHz Cortex-M0+ MCU | STMicroelectronics
STM32G041K8U6

STM32G041K8U6 - 64MHz Cortex-M0+ MCU | STMicroelectronics

STMicroelectronics STM32G041K8U6 is an Arm Cortex-M0+ 32-bit RISC microcontroller operating up to 64 MHz, with 64 KB of Flash memory, 8 KB of RAM, and a 32-pin UFQFPN 5 x 5 mm package. It combines a compact general-purpose MCU architecture with mixed-signal and timer-driven control capabilities for compact embedded systems. A microcontroller, or MCU, is a semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32G0 MCU family belongs to the embedded-controller hierarchy, combining an Arm Cortex-M0+ core with timers, communication interfaces, analog conversion functions, and general-purpose I/O. This integration reduces component count and simplifies firmware-based measurement, monitoring, and control designs. Key features of the STM32G041K8U6 include a 64 MHz maximum CPU frequency, 64 KB of programmable Flash, 8 KB of SRAM, and two USART interfaces. The STM32G041x6/x8 family is specifically positioned for cost-sensitive applications combining an MCU, ADC, timer, and PWM functions. Its small 5 x 5 mm UFQFPN package also supports space-constrained control boards. The Cortex-M0+ processor provides a compact instruction set with Thumb-2 support and deterministic behavior suitable for embedded control. Flash memory retains firmware when power is removed, while SRAM provides working memory for execution stacks, data buffers, and control algorithms. The peripheral set supports communication with external controllers and the generation of precision timing or PWM waveforms for actuator and power-conversion systems. Typical applications include industrial sensor nodes, compact motor controllers, digital power conversion, battery-powered instruments, building-control modules, and low-cost consumer devices. The combination of 64 MHz processing, 8 KB RAM, analog functions, timers, PWM, and serial communication allows one MCU to supervise multiple mixed-signal tasks without external logic devices. PCB design should follow the manufacturer’s pin and land-pattern requirements exactly, including exposed-pad and thermal-via layout. Place decoupling capacitors adjacent to the supply pins, route sensitive analog inputs away from fast-switching nodes, and confirm the selected temperature and order-code requirements against the manufacturer datasheet before production release. This product page combines the manufacturer’s device positioning, package and memory details, sourcing guidance, application fit, and design cautions into a practical engineering overview for the STM32G041K8U6. It also identifies family-level alternatives for designs that require different flash density, memory, or peripheral resources while retaining the same 32-pin footprint.

詢價 聯絡我們
STM32G050C8T6 - 64MHz Cortex-M0+ MCU | STMicroelectronics
STM32G050C8T6

STM32G050C8T6 - 64MHz Cortex-M0+ MCU | STMicroelectronics

STMicroelectronics STM32G050C8T6 is a 32-bit Arm Cortex-M0+ microcontroller with a 64 MHz CPU, 64 KB of Flash memory, 18 KB of RAM, and a 48-LQFP 7 x 7 mm package. It operates from 2.5 V to 3.3 V in the distributor description, while the ST online store specifies a 2 V to 3.6 V operating range for the STM32G050C8T6 device. A microcontroller is a programmable system-on-chip that combines a processor core, nonvolatile program memory, volatile data memory, peripherals, and I/O in one package. Within the embedded-control hierarchy, the STM32G050 belongs to the Arm Cortex-M0+ MCU, 32-bit microcontroller, embedded processor, and semiconductor product classes. This structure allows one component to execute control software and supervise sensors, communications, timers, and analog signals without a separate processor. The principal specifications are a 64 MHz Arm Cortex-M0+ core, 64 KB Flash, 18 KB SRAM, and a maximum 64 MHz operating frequency. The device is described as a Mainstream Value Line product with two USARTs, timers, an ADC, communication interfaces, and LIN connectivity. Its 48-LQFP package provides 48 externally accessible pins in a 7 x 7 mm surface-mount format suitable for compact control boards. The STM32G050C8T6 architecture targets cost-sensitive embedded nodes where a compact Cortex-M0+ core, useful memory capacity, and common serial interfaces are more important than a high-pin-count package or advanced connectivity. ST identifies the STM32G050x6 and STM32G050x8 devices as mainstream microcontrollers based on the high-performance Arm Cortex-M0+ 32-bit RISC core operating up to 64 MHz. The C8 designation in the offered configuration corresponds to the verified 64 KB Flash and 18 KB RAM configuration presented by the manufacturer and distributors. Typical uses include LIN-connected industrial and building-control nodes, compact sensor interfaces, power and motor supervisory controllers, communication bridges, low-cost USB-connected configuration tools, and general embedded-control products. Two USART channels support serial links, the ADC supports analog measurement, and the timer resources suit periodic control tasks. Firmware must still be reviewed against the complete datasheet before assigning every peripheral or pin. Designers should confirm the exact pin multiplexing, electrical limits, clock tree, ADC characteristics, and low-power behavior from the official STM32G050C8 documentation. Decoupling requirements, exposed-ground layout, programming access, and oscillator stability are as important as the nominal 64 MHz CPU rating when establishing reliable operation. This product record consolidates current manufacturer and distributor information, verified pricing availability references, package details, and practical substitution guidance. It also distinguishes confirmed drop-in candidates from parts that require board, firmware, and peripheral-level review, adding engineering context beyond a basic distributor listing.

詢價 聯絡我們
STM32G050K8T6 - 64MHz Arm Cortex-M0+ 64KB MCU | STMicroelectronics
STM32G050K8T6

STM32G050K8T6 - 64MHz Arm Cortex-M0+ 64KB MCU | STMicroelectronics

The STMicroelectronics STM32G050K8T6 is a 32-bit Arm Cortex-M0+ microcontroller operating up to 64 MHz, with 64 KB of Flash memory and 18 KB of SRAM, housed in a 32-LQFP 7 x 7 mm package. The STM32G0 series occupies STMicroelectronics' mainstream value line and targets compact embedded systems that require efficient processing, multiple communication interfaces, and analog-to-digital conversion without a high-cost MCU package. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and interface circuitry into one package. The STM32G050K8T6 uses an Arm Cortex-M0+ RISC core, a simplified 32-bit architecture intended for efficient embedded control. Within the STM32 family hierarchy, this device belongs to the STM32G0 mainstream value line, combining general-purpose processing with communication interfaces, timers, and an ADC. Verified device characteristics include a maximum CPU frequency of 64 MHz, 64 KB of Flash memory, 18 KB of RAM, and two USART interfaces. Its operating voltage range is 2 V to 3.6 V. These attributes make it suitable for small control systems that need serial connectivity, periodic timing functions, and analog measurement without requiring a larger high-density MCU. The STM32G050K8T6 combines 64 KB of nonvolatile program storage with 18 KB of SRAM, providing enough space for firmware, configuration data, and moderate working buffers. Its 64 MHz Cortex-M0+ core supports deterministic control tasks, while the listed USART interfaces allow connection to sensors, actuators, human-interface modules, or industrial communication equipment. The integrated ADC expands its usefulness in metering, monitoring, and embedded automation applications. Typical uses include IoT sensor nodes, compact motor-control and metering boards, industrial automation controllers, and low-power embedded products. The 32-LQFP 7 x 7 mm package provides a widely used footprint with exposed leads that are inspectable during visual assembly and suitable for prototypes as well as moderate-volume production. When designing a board around the STM32G050K8T6, verify every signal assignment against the manufacturer's package pinout and power recommendations before layout release. The 2 V to 3.6 V supply range and 64 MHz performance must be considered together when selecting regulators, decoupling, clock components, and trace geometry. Firmware migration decisions should also account for peripheral availability and the memory-map differences of substitute MCUs. This page consolidates verified manufacturer and distributor information, price context, application guidance, and a same-package replacement analysis. It also distinguishes confirmed device facts from parameters that require confirmation from the full manufacturer datasheet, helping engineers evaluate fit without mistaking family similarity for guaranteed drop-in equivalence.

詢價 聯絡我們
STM32G051C8T6 - 64MHz Cortex-M0+ 64KB MCU | STMicroelectronics
STM32G051C8T6

STM32G051C8T6 - 64MHz Cortex-M0+ 64KB MCU | STMicroelectronics

STMicroelectronics STM32G051C8T6 is a 32-bit Arm Cortex-M0+ microcontroller operating up to 64 MHz, with 64 KB of Flash memory and 18 KB of SRAM, housed in a 48-pin LQFP 7 x 7 mm package. It is a general-purpose STM32G0 series device intended for compact control systems requiring efficient processing, embedded memory, and a broad set of peripheral interfaces. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one package. The STM32G0 family belongs to the Arm Cortex-M embedded hierarchy, where the Cortex-M0+ core provides compact, energy-efficient real-time execution. The STM32G051C8T6 can therefore serve as the central controller in a cost-sensitive embedded product rather than requiring a separate processor, memory, and interface components. Verified product information identifies a 32-bit Arm Cortex-M0+ core, a maximum operating frequency of 64 MHz, and 64 KB of Flash memory. Distributor records also identify 18 KB of RAM and two USART instances. The 48-LQFP 7 x 7 mm package provides a conventional leaded surface-mount format that is convenient for assembly and inspection. Arrow also lists the device for 2.5 V or 3.3 V operation. The STM32G051x6/x8 device family is designed for mainstream embedded control, balancing a 64 MHz maximum clock with integrated memory and communication peripherals. Its Arm Cortex-M0+ architecture supports efficient real-time control without the power and cost of a higher-performance Cortex-M core. Two USARTs allow connections to sensors, human-interface modules, external transceivers, or service interfaces while reducing the need for separate serial-interface controllers. Typical applications include compact industrial controllers, compact motor-control modules, building automation endpoints, small sensor-hub boards, communication equipment, and consumer accessory controllers. In each case, the MCU consolidates control processing and peripheral management into one package while keeping the design centered on the widely supported STM32 embedded ecosystem. When laying out a board, verify every exposed pad, pin function, supply requirement, decoupling value, and programming interface against the current STMicroelectronics datasheet. The 48-LQFP footprint should not be treated as interchangeable with 32-pin or 64-pin variants merely because all are LQFP packages; pin count, pin assignment, and electrical limits must match before substitution. This product record consolidates verified manufacturer and distributor information, transparent data gaps, package details, purchasing context, and same-family drop-in candidates. It also distinguishes electrical and firmware compatibility from a mere shared package, helping engineers make a defensible selection rather than treating footprint similarity as proof of interchangeability.

詢價 聯絡我們
STM32G051C8U6 - 64MHz Arm Cortex-M0+ MCU | STMicroelectronics
STM32G051C8U6

STM32G051C8U6 - 64MHz Arm Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32G051C8U6 is a 32-bit Arm Cortex-M0+ microcontroller with a 64 MHz operating frequency, 64 KB of Flash memory, 18 KB of SRAM, and a 48-pin UFQFPN 7 x 7 mm package. Its operating supply range is 1.7 V to 3.6 V, and the device provides two USART interfaces, timers, ADC, DAC, and communication interfaces for compact embedded-control designs. An Arm Cortex-M0+ microcontroller is a 32-bit reduced-instruction-set processor designed for cost-sensitive embedded systems. It belongs to the microcontroller hierarchy within semiconductor devices and combines a CPU, memory, analog peripherals, communication interfaces, timers, and GPIO in one package. The STM32G0 family emphasizes efficient control operation, compact implementation, and broad peripheral integration for industrial, consumer, and communications equipment. The STM32G051C8U6 reaches up to 64 MHz and includes 64 KB of protected Flash together with 18 KB of SRAM. According to the verified product information, 16 KB of the SRAM has hardware parity checking. Two USART channels support serial equipment, while the listed timers, ADC, DAC, and communication interfaces reduce the need for external components in measurement, control, and communications-oriented products. Its 1.7 V to 3.6 V operating range permits use in systems powered from low-voltage rails. The available temperature ratings shown in the verified data span -40°C through 85°C, 105°C, or 125°C, depending on the device variant. The 48-pin UFQFPN package provides a compact 7 x 7 mm footprint and includes 45 I/O according to the Octopart comparison data, making the MCU suitable for boards where connector density and routing space are important. Typical applications include compact sensor-control modules, industrial monitoring equipment, consumer controls, communication transceivers, low-power embedded nodes, and general-purpose control boards. The Cortex-M0+ platform and integrated analog and serial peripherals allow designers to consolidate functions that might otherwise require several discrete components. When designing around the STM32G051C8U6, verify every signal against the exact 48-pin package variant and provide the decoupling and grounding required by the manufacturer guidance. Software migration between similarly named STM32G0 devices should be treated as a new-device qualification rather than assumed to be automatic, because memory size and peripheral availability can differ. This page combines verified manufacturer and distributor specifications, strict same-package drop-in candidates, practical application guidance, and a parameter-by-parameter comparison to support faster engineering and sourcing decisions beyond the basic distributor listing.

詢價 聯絡我們
STM32G051K6T6 - 64MHz Cortex-M0+ 32KB MCU | STMicroelectronics
STM32G051K6T6

STM32G051K6T6 - 64MHz Cortex-M0+ 32KB MCU | STMicroelectronics

The STMicroelectronics STM32G051K6T6 is a 32-bit Arm Cortex-M0+ microcontroller operating up to 64 MHz, with 32 KB of Flash memory, 18 KB of SRAM, and a 32-pin LQFP (7x7 mm) package. The STM32G051K6T6 also supports a 1.7 V to 3.6 V operating voltage range and includes two USART interfaces, making it suitable for compact embedded control systems with serial communications. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and interface circuitry into one package. The STM32G051K6T6 belongs to the STM32G0 mainstream microcontroller family and uses the low-complexity 32-bit Arm Cortex-M0+ RISC architecture. Its combination of 64 MHz processing performance, 18 KB of SRAM, and embedded peripherals supports responsive control tasks in cost-sensitive industrial, consumer, and communications equipment. The verified device data identifies a 64 MHz maximum operating frequency, 32 KB of Flash organized as 32K x 8, and 18 KB of SRAM. Two USART peripherals support asynchronous and synchronous serial communication, while the device family also provides general-purpose timers. These resources are useful for sensor acquisition, actuator control, human-interface input, and communication bridges without requiring a separate discrete interface controller. The 1.7 V to 3.6 V supply range allows operation from low-voltage 3.3 V systems when the supply remains within the documented limits. The STMicroelectronics manufacturer datasheet also explains that VCORE is an internal digital supply produced by an embedded linear voltage regulator. Packages without a dedicated VREF+ pin connect VREF+ internally to VDD and require the internal voltage-reference buffer to remain disabled. Typical uses include compact motor and relay controllers, industrial sensor nodes, communication modules, USB-connected accessories, instrument-control boards, and low-cost consumer-control products. The 32-pin LQFP package is easy to inspect and rework during prototyping, while the small 7x7 mm body supports space-constrained assemblies when adequate PCB routing and thermal design are provided. Designers should confirm the exact pin functions, decoupling requirements, clock configuration, flash-programming method, and exposed-pin assignments in the manufacturer datasheet before layout. Software replacement between close STM32G0 devices should be treated as a migration project rather than assumed complete firmware compatibility, even when the package and core match. This product page consolidates the verified manufacturer and distributor specifications, current ordering information, practical application guidance, and same-family drop-in candidates. It also identifies where alternative sourcing data or detailed electrical characteristics remain unavailable so engineers can validate critical parameters before procurement or design release.

詢價 聯絡我們
STM32G051K8T6 - 64MHz Cortex-M0+ MCU | STMicroelectronics
STM32G051K8T6

STM32G051K8T6 - 64MHz Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32G051K8T6 is a 32-bit Arm Cortex-M0+ microcontroller operating up to 64 MHz, with 64 KB of Flash memory and 18 KB of SRAM in a 32-LQFP 7 x 7 mm package. It operates from 1.7 V to 3.6 V and integrates two USARTs, timers, ADC, DAC, and communication interfaces for cost-sensitive embedded-control designs. A microcontroller is a programmable semiconductor that combines a processor core, nonvolatile Flash program memory, volatile SRAM, and peripherals on one integrated circuit. The STM32G051 belongs to the STM32G0 mainstream MCU hierarchy: microcontroller, embedded microcontroller, Arm Cortex-M0+ processor, and power-management-compatible system-on-chip. This family targets applications where compact control, low voltage, and efficient embedded processing are more important than a high-end application processor. The Cortex-M0+ core provides 32-bit processing at up to 64 MHz while retaining a simple instruction set suited to real-time control. Program storage is provided by 64 KB of protected Flash, and the device includes 18 KB of SRAM. Two USART interfaces support serial peripherals, while timers, ADC, DAC, and communication interfaces broaden the range of supported sensor, actuator, control, and communication functions. The 1.7 V to 3.6 V supply range makes the MCU suitable for 3.3 V systems and compatible low-voltage rails. Its 32-LQFP 7 x 7 mm package provides a practical option for prototyping, mixed-signal control boards, compact industrial controllers, and cost-sensitive consumer equipment. The exposed thermal performance, exact pin functions, and full electrical limits must be confirmed in the manufacturer datasheet before layout sign-off. Typical applications include industrial sensing and actuator control, compact motor-control modules, building and access equipment, consumer controls, communication equipment, and low-cost IoT gateways. Two USARTs are useful when connecting a host controller and an external radio or sensor module, while the ADC and DAC support analog measurement and signal-generation tasks. Designers should budget input and output decoupling close to the supply pins, confirm the selected oscillator configuration against the application’s timing requirements, and validate every peripheral signal against the 32-pin package data. Firmware should also include brownout, clock, reset, and peripheral-state checks rather than relying on power-on defaults alone. This page consolidates the verified manufacturer and distributor information, distinguishes direct drop-in alternatives, and adds application guidance, comparison parameters, and PCB-oriented design considerations that are not organized together in a distributor listing.

詢價 聯絡我們