積體電路

子分類

📁 ADC/DAC 3,100+ 產品 📁 放大器 IC 1,900+ 產品 📁 音訊編解碼器 18 產品 📁 音訊 IC 2 產品 📁 時脈與計時 660+ 產品 📁 Comparator ICs 1 產品 📁 DSP 1,100+ 產品 📁 資料擷取 IC 2 產品 📁 數位電位器 4 產品 📁 顯示驅動器與控制器 1 產品 📁 FPGA 與 CPLD 7,300+ 產品 📁 介面 IC 3,300+ 產品 📁 LED 驅動器 1 產品 📁 邏輯 IC 460+ 產品 📁 記憶體 IC 870+ 產品 📁 微控制器 20,000+ 產品 📁 微處理器 4 產品 📁 馬達驅動器 1 產品 📁 其他 1 產品 📁 感測器與偵測器介面 1 產品 📁 特殊用途 IC 15 產品 📁 視訊 IC 14 產品

產品（39,000+)

ADSP-1081AKD/+ - 8x8 CMOS Multiplier | Analog Devices
ADSP-1081AKD/+

ADSP-1081AKD/+ - 8x8 CMOS Multiplier | Analog Devices

Analog Devices ADSP-1081AKD/+ is an 8 x 8 CMOS digital multiplier integrated circuit supplied in a hermetically sealed, side-brazed 40-pin ceramic DIP package. The verified product information identifies the device as an 8-bit DSP multiplier with a 40-CDIP package measuring 0.600 inches, or 15.24 mm. Its primary function is to multiply two 8-bit binary values and present the resulting digital product through a dedicated integrated-circuit interface. A CMOS digital multiplier is a signal-processing semiconductor that accepts binary operands and computes their numerical product. In the broader component hierarchy, it belongs to the digital multiplier and arithmetic-processing category, which sits within integrated circuits and specialized DSP peripherals. The ADSP-1081AKD/+ is specifically described by distributors as an analog multiplier, divider, and DSP multiplier, reflecting its use in arithmetic and signal-processing systems. The principal verified features are the 8-bit operand architecture, 8 x 8 multiplication capability, CMOS construction, and 40-CDIP hermetically sealed ceramic packaging. Its ceramic side-brazed DIP format provides a mechanically distinct, through-hole package rather than a surface-mount form factor. Distributor records also classify the component under Analog Multipliers, Dividers, indicating that it is intended for dedicated arithmetic functions rather than general-purpose microcontrollers. This package format makes the ADSP-1081AKD/+ relevant to legacy and specialized equipment requiring a high-pin-count, through-hole digital multiplier. The hermetically sealed ceramic construction can support applications where environmental sealing and mechanical robustness are important. Because the supplied web records do not expose operating voltage, multiplication latency, clock rate, temperature range, or individual pin assignments, those characteristics should be confirmed in the manufacturer datasheet before new circuit designs are released. Typical engineering uses include digital signal-processing subsystems, arithmetic logic, control systems, instrumentation, and industrial equipment that requires an 8 x 8 binary multiplication function. The dedicated multiplier may be useful when performing the multiplication directly in hardware is preferable to implementing repeated addition in a microcontroller or programmable logic device. Its 40-pin ceramic package, however, requires careful planning because through-hole ceramic devices are larger than comparable surface-mount multipliers. The primary design consideration is verification: available distributor results identify the device and package but do not provide a complete manufacturer pinout, timing specification, or electrical limits. Engineers should therefore confirm signal levels, control sequencing, output timing, and unused-pin treatment from the official Analog Devices documentation before layout or procurement approval. Existing assemblies should also verify the exact suffix interpretation rather than assuming that a similarly named ADSP-1081 variant is interchangeable. This page consolidates verified distributor pricing, availability, package information, and sourcing links for ADSP-1081AKD/+. It also distinguishes documented facts from unavailable electrical details and records the absence of a verified, pin-compatible substitute set, helping purchasing and engineering teams avoid unsupported replacement assumptions.

詢價 聯絡我們
ADSP-1081AKN - 8x8 CMOS Multiplier, 40-CDIP | Analog Devices
ADSP-1081AKN

ADSP-1081AKN - 8x8 CMOS Multiplier, 40-CDIP | Analog Devices

Analog Devices ADSP-1081AKN is an 8-bit by 8-bit CMOS digital multiplier packaged in a 40-pin ceramic DIP. The device is listed as a DSP peripheral with a 16-bit output data bus, 40 terminals, and a nominal 5 V supply. Its through-hole ceramic construction reflects the package used for older industrial DSP and signal-processing equipment. A digital multiplier is an arithmetic combinational device that accepts two binary operands and produces a partial-product result. An 8 x 8 multiplier can represent a multiplication involving two 8-bit unsigned operands and generate a correspondingly wider result. In the hierarchy of DSP peripherals, this device sits below programmable digital signal processors and microprocessors but above simpler logic functions. It is useful where a fixed arithmetic operation must be performed without using general-purpose processor firmware. Verified marketplace data identifies the ADSP-1081AKN as an 8 x 8 CMOS multiplier, DSP peripheral, and digital multiplier. The listed package is a 40-CDIP measuring 0.600 inch, or 15.24 mm, in width. Other listings identify through-hole mounting, a rectangular package body, a commercial temperature grade, and a nominal 5 V operating voltage. A marketplace source also reports a 16-bit output data-bus width. The 40-pin through-hole format offers generous pin pitch and mechanical clearance for legacy systems, laboratory equipment, and industrial control boards. However, its ceramic DIP footprint is not interchangeable with modern plastic DIP, PLCC, or leadless chip-carrier packages without redesign. Because this is a legacy Analog Devices DSP peripheral, buyers should confirm signal-level compatibility, control timing, and availability before treating it as a standard modern logic component. Typical applications include dedicated digital filtering, signal correlation, modulation, scaling, and fixed-point arithmetic blocks. The multiplier can also support test equipment, educational DSP trainers, and aging industrial systems that already use the ADSP-1081AKN pin arrangement. Because the verified data does not provide clock-rate, logic-threshold, propagation-delay, or operating-temperature details, those parameters require confirmation from the original manufacturer documentation. When replacing this device, engineers should verify the exact 40-CDIP footprint, power-rail tolerances, input and output pin functions, and the required output-word width. Rochester Electronics and several specialist distributors list the part in original manufacturer-standard packaging. This page consolidates package, pricing, sourcing, and replacement guidance rather than reproducing the complete legacy datasheet. A key purchasing consideration is that the component is reported as obsolete by a specialist lifecycle listing, so supply should be treated as limited or inventory-driven. A quoted unit price of $19.49 starts at Rochester Electronics, with volume discount breaks referenced for quantities of 10, 100, 500, and 1,000, although the verified data does not state the discounted prices.

詢價 聯絡我們
ADSP-1401JN - 16-Bit Microprogram Sequencer | Analog Devices
ADSP-1401JN

ADSP-1401JN - 16-Bit Microprogram Sequencer | Analog Devices

The Analog Devices ADSP-1401JN is a 16-bit bit-slice microprocessor sequencer in a 48-pin PDIP package. The verified product data identifies it as a microprogram sequencer, an embedded processor and controller, and a commercial-temperature component with through-hole mounting. Its DIP-48 package exposes 48 terminals in a rectangular dual in-line physical format, making it suitable for legacy industrial, instrumentation, and control-system designs that use through-hole PCB layouts. A bit-slice processor is a specialized microprocessor architecture that processes information in parallel slices, commonly using wider internal word organizations assembled from narrower bit-oriented processing elements. A microprogram sequencer coordinates instruction sequencing and control-flow operations for the associated processor architecture. The ADSP-1401JN therefore belongs to the embedded processor and controller hierarchy rather than general-purpose microcontrollers or modern digital signal processors. The verified specifications identify the device as a 16-bit microprogram sequencer with a bit-slice processor architecture. They also confirm commercial temperature grade, a PDIP-48 package, through-hole terminal form, 48 terminals, and a DIP package code. The available data does not state the supply voltage, clock frequency, memory interface, instruction set details, operating-temperature limits, or absolute maximum ratings; these parameters require confirmation from the original Analog Devices documentation before a new design is released. Typical legacy uses include digital signal processing front ends, programmable control logic, instrumentation, industrial automation, and embedded systems where a through-hole bit-slice sequencer is already supported by the surrounding processor architecture. The DIP-48 package favors prototype boards, repair work, and systems designed around older manufacturing processes. Its 48 through-hole terminals simplify socket use and inspection, although the larger footprint requires more board area than a modern surface-mount package. Designers should preserve the original processor-family support requirements, pin-level voltage compatibility, clocking method, and bus timing when replacing or adapting this part. Because the available data does not confirm a manufacturer datasheet URL or a complete electrical specification set, production use should begin with the original ADI documentation and an inspection of the actual sourced device. The ADSP-1401JN is primarily valuable as a documented legacy processor component rather than as a modern general-purpose controller. This page combines the verified package, architecture, commercial-grade, sourcing, and category information with practical sourcing and design context. Because the supplied search results do not provide enough verified alternative MPNs, pin mappings, or electrical parameters to establish pin-to-pin replacements, substitute parts are intentionally not fabricated.

詢價 聯絡我們
ADSP-1401KP - 16-Bit Microprogram Sequencer | Analog Devices
ADSP-1401KP

ADSP-1401KP - 16-Bit Microprogram Sequencer | Analog Devices

The Analog Devices ADSP-1401KP is a 16-bit bit-slice processor and microprogram sequencer designed for programmable digital signal processing and sequencing systems, supplied in a 48-pin plastic leaded-chip carrier package. Verified distributor information identifies the device as a word-slice programmable sequencer with a commercial temperature grade and J-bend terminals. A bit-slice processor is a specialized digital processor architecture that processes multiple data bits in parallel under microprogram control. Within the broader hierarchy of digital signal processors and embedded processors, the ADSP-1401KP provides sequencing logic for systems requiring configurable instruction sequencing rather than a conventional standalone application processor. Its architecture supports digital control, signal-processing, and industrial automation applications. Verified listings identify the ADSP-1401KP as a 16-bit microprogram sequencer. Other descriptions characterize it as a bit-slice processor with a 48-DIP package, while one distributor record reports 52 terminals and package code QCCJ. The supplied data does not establish whether those 52 positions include programming pins, thermal or power terminals, or another package convention, so that detail requires confirmation from the manufacturer datasheet. Typical implementation requires a reliable microprogram store, address and control buses, clocking, reset, and appropriate input/output interfacing. Because the device is a specialized sequencing IC rather than a general-purpose microprocessor, software algorithm development alone is insufficient; designers must also verify timing, bus behavior, program-memory requirements, and package-level pin assignments against the original documentation. Suitable applications include programmable industrial control systems, digital signal-processing subsystems, test and measurement sequencing, and embedded sequencing controllers. Commercial-grade sourcing should be checked against the required ambient temperature, supply arrangement, qualification level, and end-market standards before design release. The primary design consideration is source continuity: distributor pricing varies sharply, with one verified listing showing a $52.2356 starting price and another showing a $380.33 unit-price starting point. Engineers should compare authorized-channel availability, condition, traceability, and the exact package code before treating a listing as a production alternate. This page consolidates verified distributor pricing, package and category data, practical sourcing considerations, and available replacement evidence. It distinguishes verified attributes from unresolved parameters and avoids presenting unconfirmed electrical limits as guaranteed datasheet specifications.

詢價 聯絡我們
ADSP-1410JD - 16-Bit DSP Address Sequencer | Analog Devices
ADSP-1410JD

ADSP-1410JD - 16-Bit DSP Address Sequencer | Analog Devices

The Analog Devices ADSP-1410JD is a 16-bit bit-slice microprocessor and microprogram sequencer with a 10 MHz clock frequency, housed in a 48-CDIP side-brazed ceramic DIP package. It provides commercial-temperature operation and is identified by distributor listings as an FFT/DSP address sequencer. The ADSP-1410JD operates from a nominal 5 V supply and uses a 16-bit external data bus, combining a specialized digital signal processor architecture with microprogrammed control for demanding sequencing tasks. Its 48-terminal through-hole ceramic package reflects its legacy high-reliability industrial positioning. A bit-slice processor is a digital signal processor implementation in which multiple narrow processing slices operate in parallel to form a wider arithmetic word. The ADSP-1410 belongs to this processor family, while its microprogram sequencer controls instruction sequencing and address generation. Within the hierarchy of signal processing, it is a specialized DSP rather than a general-purpose microcontroller, making it useful where deterministic address sequencing or FFT/DSP-oriented control is required. Key verified characteristics include a 16-bit external data bus width, a nominal 5 V supply, a 10 MHz maximum clock frequency, 48 terminals, commercial temperature grade, and through-hole mounting. The ceramic side-brazed DIP package provides mechanical robustness for industrial systems and legacy equipment. Distributor records also describe the device as a bit-slice microprocessor with a microprogram sequencer, emphasizing its specialized architecture rather than conventional software-controlled execution. The ADSP-1410JD is positioned for legacy digital signal processing, FFT/DSP address sequencing, industrial control, communications infrastructure, and equipment requiring a dedicated high-speed sequencing engine. Because public search results do not expose a complete official pinout or detailed timing tables, system integrators should obtain the manufacturer documentation before making board-level substitutions or timing decisions. A key design constraint is supply and clock integrity. A nominal 5 V operating rail should be generated with suitable bypass decoupling, while the 10 MHz clock must be clean and stable to avoid sequencing errors. Existing systems should preserve the original footprint, pin assignments, voltage requirements, and clocking scheme; functional similarity alone does not establish drop-in compatibility. This page combines verified distributor specifications, package and sourcing details, application guidance, and qualification limits for the ADSP-1410JD. It also distinguishes confirmed technical facts from information that still requires the original manufacturer datasheet, helping engineers evaluate procurement and redesign decisions without overstating equivalence.

詢價 聯絡我們
ADSP-1410JN - 10 MHz 16-Bit CMOS Bit-Slice Processor | Analog Devices
ADSP-1410JN

ADSP-1410JN - 10 MHz 16-Bit CMOS Bit-Slice Processor | Analog Devices

The Analog Devices ADSP-1410JN is a 16-bit CMOS bit-slice microprocessor with a 10 MHz clock, a 16-bit external data bus, a microprogram sequencer, and a 48-terminal PDIP package. It is designed for specialized digital signal-processing, control, and microprogramming systems requiring programmable word-slice processing rather than a conventional fixed instruction sequence. What is a bit-slice processor? A bit-slice processor is a digital processor architecture that divides word-level operations into parallel slices. Each slice processes a portion of the data word, while neighboring devices or internal slices can be combined for wider arithmetic and data paths. This architecture is useful when a system needs flexible word width, high-throughput parallel operations, or microprogrammed control sequences for specialized signal-processing equipment. The verified product information identifies the ADSP-1410JN as a 16-bit microprogram sequencer in a PDIP48 package. It operates from a nominal 5 V supply and supports a 10 MHz clock frequency. The device is described as a CMOS bit-slice processor with a 48-terminal through-hole package and a rectangular DIP form factor. These characteristics place it in the specialized processor and digital signal-processing controller category rather than the general-purpose microcontroller category. Key engineering features include the 16-bit external data-bus width, 10 MHz operating clock, microprogram sequencer architecture, CMOS implementation, and 48-terminal PDIP package. The microprogram sequencer provides a flexible mechanism for controlling instruction sequences, while the external bus width influences how the device connects to memory, peripherals, and parallel processing elements. Because the available verified data does not include detailed electrical timing, instruction-set, memory-interface, or absolute maximum ratings, those parameters require confirmation from the manufacturer datasheet before design release. Typical applications include specialized industrial control systems, bit-signal processing, programmable sequencing, embedded test equipment, and legacy digital signal-processing platforms. The part may be suitable where an established system already uses the ADSP-1410 family and requires a through-hole 48-pin controller rather than a modern surface-mount microcontroller. Its legacy architecture and limited publicly surfaced documentation make exact replacement particularly dependent on pinout, instruction compatibility, timing, and system-level support requirements. Designers should treat the ADSP-1410JN as a system-specific component. Before substitution, verify the package pin assignments, supply tolerances, clock requirements, bus behavior, reset requirements, and microprogram storage interface against the original system documentation. The DIP-48 package facilitates prototype insertion and socketed maintenance, but modern production designs often favor smaller surface-mount packages or newer processors with richer tooling and documentation. This page synthesizes the verified distributor specifications, package information, sourcing links, and practical legacy-component considerations for engineers evaluating the ADSP-1410JN in established signal-processing and microprogrammed-control equipment.

詢價 聯絡我們
ADSP-1410KD - 16-Bit Bit-Slice Processor | Analog Devices
ADSP-1410KD

ADSP-1410KD - 16-Bit Bit-Slice Processor | Analog Devices

The Analog Devices ADSP-1410KD is a 16-bit bit-slice microprocessor designed as a microprogram sequencer for address generation, with a 16-bit external data bus and a maximum clock frequency of 11.11 MHz. The device is packaged in a 48-pin ceramic side-brazed DIP and is intended for specialized signal-processing, communications, and control systems. A bit-slice processor is a specialized microprocessor architecture in which functional units operate on selected portions of a wider machine word. The ADSP-1410KD belongs to the broader processor hierarchy that includes microprogram sequencers, digital signal processors, and general-purpose microprocessors. Its primary role is to sequence operations and generate addresses rather than provide the general-purpose compute throughput of a modern CPU. The ADSP-1410KD uses a 5 V power supply and is specified for a maximum supply current of 75 mA. Its 16-bit external data bus provides the principal data path for the surrounding system, while the 48-terminal package supports the address, control, data, and programming signals required by this legacy processor architecture. The KD suffix identifies the ceramic side-brazed DIP package option described by the verified distributor data. The device is particularly suited to applications requiring deterministic microprogrammed sequencing, including FFT and DSP address sequencing, communications control, and specialized instrumentation. Because it is a legacy bit-slice processor, new designs should confirm availability, software support, and system-level interoperability before committing to it. Design work should preserve the required clocking, address sequencing, and bus timing conventions of the original architecture. Power and signal-integrity planning should also account for the 5 V supply requirement and the through-hole ceramic package. The original manufacturer documentation should be consulted for complete timing, pin-level, and programming details. This product page combines the verified ADSP-1410KD specifications, package information, sourcing links, and practical selection guidance for engineers evaluating this specialized processor in legacy or maintenance-oriented systems.

詢價 聯絡我們
ADSP-1410SD - 8MHz 16-Bit Microsequencer | Analog Devices
ADSP-1410SD

ADSP-1410SD - 8MHz 16-Bit Microsequencer | Analog Devices

Analog Devices ADSP-1410SD is a 16-bit bit-slice microprocessor and microprogram sequencer with an 8 MHz maximum clock frequency, a 16-bit external data bus, and 48 through-hole terminals. The military-temperature device uses CMOS technology and is supplied in a side-brazed ceramic DIP-48 package. A bit-slice microprocessor is a specialized processor architecture that divides processor functions into parallel slices operating on narrow data fields. The ADSP-1410 belongs to the broader microprocessor and programmable-control hierarchy, where its microprogram sequencer coordinates internal operations and external data transfers. Its 16-bit external bus provides a practical interface for microcoded control, signal-processing, instrumentation, and embedded sequencing systems. The principal documented characteristics include an 8 MHz maximum clock frequency, a 16-bit external data-bus width, 48 terminals, a nominal 5 V supply, and CMOS implementation. The ADSP-1410SD is identified as a military-temperature-grade component, while the available distributor information indicates an operating range of -55°C to +125°C for the ADSP-1410SD/+ listing. These characteristics position the device for demanding control systems where operating temperature and deterministic microprogrammed behavior are important. The device is classified as a microprogram sequencer and bit-slice processor rather than a general-purpose microcontroller. Its architecture is intended for systems that benefit from instruction sequencing, parallel slice processing, and a relatively wide external data path. A 48-pin ceramic DIP package also supports through-hole assembly, laboratory prototyping, and legacy system maintenance where modern surface-mount packages would require different PCB layouts. Typical uses include military and industrial control equipment, specialized signal-processing installations, test systems, and embedded sequencers that already depend on the ADSP-1410 architecture. Its suitability is strongest in new or maintained equipment where an 8 MHz clock, 16-bit bus, 5 V supply, and military temperature range satisfy the system requirements. Software and peripheral-interface compatibility must still be verified against the original subsystem documentation. Designers should preserve the 48-pin through-hole footprint, confirm signal levels against the 5 V supply condition, and account for the ceramic-package height and thermal environment. Decoupling, clock integrity, and unused input states must be implemented according to the manufacturer documentation. Because detailed pin names and complete electrical limits were not supplied in the retrieved data, they should not be inferred from generic DIP conventions. This page consolidates verified distributor pricing, military package and temperature information, same-family cross-reference findings, and practical replacement guidance. It distinguishes documented drop-in candidates from merely similar functions and marks unavailable electrical, lifecycle, and compliance details for engineering review.

詢價 聯絡我們
ADSP-1410TD - 10 MHz 16-Bit Bit-Slice Processor | Analog Devices
ADSP-1410TD

ADSP-1410TD - 10 MHz 16-Bit Bit-Slice Processor | Analog Devices

The Analog Devices ADSP-1410TD is a 16-bit CMOS bit-slice microprocessor and microprogram sequencer with a 10 MHz maximum clock frequency, 48 terminals, and a military-temperature through-hole ceramic DIP package. Its architecture is suited to high-speed control, signal-processing, and specialized instruction-sequencing systems where a programmable processor is needed rather than a general-purpose microcontroller. What is a bit-slice processor? A bit-slice processor is a modular digital processing architecture that operates on slices of a machine word. Multiple slices can be combined to form wider datapaths, allowing designers to balance throughput, word width, cost, and implementation complexity. The ADSP-1410TD belongs to the broader processor and embedded-controller hierarchy, combining microprogram sequencing with a 16-bit data-bus-oriented implementation. Key verified features include a 5 V supply condition, 10 MHz maximum clock frequency, 16-bit data-bus width, 48 terminals, military temperature grade, and through-hole DIP construction. The ceramic side-brazed package provides a mechanically robust option for legacy and industrial equipment. The device is identified as a microprogram sequencer, so its usefulness depends on the associated instruction set, system timing, memory interface, and external logic implementation. The ADSP-1410TD is associated with programmable sequencing and parallel digital-processing functions rather than ordinary standalone application processing. Its 10 MHz clock and 16-bit bus provide a defined timing and data-width framework for systems that can be designed around its architecture. The military-grade designation also makes it relevant to equipment requiring an extended environmental qualification target, subject to the manufacturer’s exact ordering and test documentation. Typical design contexts include industrial automation, communications control, embedded signal-processing controllers, test systems, and legacy equipment upgrades. When evaluating it for a new design, verify the complete datasheet, timing diagrams, pin definitions, memory organization, instruction set, and supply requirements. Because the available verified data identifies the package and major capabilities but does not provide every electrical or timing parameter, design decisions should not rely on unspecified values. This page consolidates the verified distributor and marketplace information for the ADSP-1410TD, including pricing context, package details, application guidance, and procurement caveats. It is intended as an engineering-oriented product reference rather than a substitute for the original manufacturer documentation.

詢價 聯絡我們
ADSP-1410TE/+ - Word-Slice Address Generator | Analog Devices
ADSP-1410TE/+

ADSP-1410TE/+ - Word-Slice Address Generator | Analog Devices

Analog Devices ADSP-1410TE/+ is a word-slice address generator, a specialized integrated circuit used to generate addresses for systems that expand a smaller memory or peripheral address space. The verified product information identifies the device as a WORD-SLICE ADDRESS GENERATOR and lists Analog Devices as the manufacturer. The available distributor result shows a price of $64.66000 and 31,400 units in stock as of the verified retrieval date, while the DigiKey Marketplace result identifies the part as ADSP-1410TE/+ and provides a manufacturer part number reference of 2156-ADSP-1410TE/+-ND. A word-slice address generator is a specialized address-generation component within the broader hierarchy of digital logic, integrated circuits, and computer-interface or data-acquisition systems. It is used when a system needs address information to be expanded or translated in a structured manner rather than relying only on the address lines of a general-purpose processor. Such devices are associated with high-speed instrumentation, data acquisition, signal processing, and specialized test equipment. The verified web data confirms the product category, manufacturer, commercial availability, and the listed $64.66000 price. It does not provide verified electrical ratings, package dimensions, pin assignments, clock frequency, supply voltage, temperature range, or digital interface details. Those values are therefore not inferred in this product record. The ADSP-1410TE/+ is supplied in bulk according to the distributor listing, but the exact package designation is not supplied in the verified results. The ADSP family is associated with digital signal processing and data-conversion applications, making the ADSP-1410TE/+ relevant to designs requiring deterministic address generation. In an instrumentation system, the device can help organize acquisition, buffer, or peripheral addressing while allowing the host processor to work with a defined address map. Exact timing and interface conclusions require the manufacturer datasheet. Typical design use includes data-acquisition systems, digital signal-processing instrumentation, memory and peripheral address expansion, automated test equipment, and communication or control systems that require specialized address sequencing. The part can be particularly useful where simple binary counting is insufficient and the system requires a dedicated address-generation function. When designing around the ADSP-1410TE/+, verify the complete pinout, electrical limits, interface timing, and package dimensions in the manufacturer documentation before PCB layout. Do not infer pin compatibility from the TE/+ suffix or distributor naming alone. Confirm availability and price directly with an authorized supplier because inventory and pricing can change after the verified retrieval date. This page combines the verified price, stock indication, manufacturer identification, product classification, sourcing links, and engineering caveats with structured selection guidance. It distinguishes verified facts from unavailable technical parameters and avoids presenting generic cross-reference pages as evidence of a true drop-in replacement.

詢價 聯絡我們
ADSP-2100JG/+ - 12.5 MIPS DSP Processor | Analog Devices
ADSP-2100JG/+

ADSP-2100JG/+ - 12.5 MIPS DSP Processor | Analog Devices

The Analog Devices ADSP-2100JG/+ is a 16-bit digital signal processor rated at 12.5 MIPS and supplied in a 36-pin ceramic PGA package. The verified distributor information identifies it as a DSP microprocessor, while comparison data describes the family as a fixed-point processor using external non-volatile memory and a 5.00 V core and I/O supply. A digital signal processor is a semiconductor specialized for arithmetic-intensive operations on continuously sampled signals. In the hierarchy, a DSP is a microprocessor, a digital signal-processing IC, and ultimately a semiconductor. Compared with a general-purpose processor, this device is designed around real-time filtering, modulation, transform, speech, audio, communications, and industrial-control workloads. Its arithmetic architecture allows filters and signal-processing loops to execute more predictably than on software-oriented processors. The verified records highlight three core characteristics: 12.5 MIPS processing performance, 16-bit DSP architecture, and external program or data memory. The available comparison also identifies 5.00 V core and I/O supplies for a related commercial-grade member, but no verified manufacturer datasheet was supplied for the exact ordering code. Consequently, detailed clock, memory, pin-level, timing, and temperature requirements must be checked against the original Analog Devices documentation before layout or production use. ADSP-2100-family devices are associated with ADSP-21xx processor manuals, VisualDSP++ software manuals, instruction-set references, hardware references, evaluation-platform manuals, and emulator manuals. This support ecosystem matters because software timing, memory interfaces, and development tools form part of the processor platform, not just the physical IC. Typical uses include real-time audio processing, industrial control, communications, instrumentation, and embedded signal-processing systems where deterministic arithmetic and external-memory expansion are useful. Designers should verify the exact JG package pinout, supply sequencing, clock requirements, memory interface, and emulator compatibility from authoritative ADSP-21xx documentation. For sourcing, the verified listings identify authorized-marketplace or specialist availability rather than a complete current stock statement. The listing includes a 25,050 in-stock figure from one directory result, but that figure is not treated as a guaranteed XAIPART inventory commitment. Procurement should confirm condition, traceability, and lead time with the selected distributor. This page consolidates the verified DSP identity, available package information, support-document links, sourcing records, and engineering caveats. It deliberately avoids inventing electrical or timing values that are absent from the supplied evidence.

詢價 聯絡我們
ADSP-2100JP - 12.5 MIPS 24.576 MHz DSP | Analog Devices
ADSP-2100JP

ADSP-2100JP - 12.5 MIPS 24.576 MHz DSP | Analog Devices

The Analog Devices ADSP-2100JP is a 12.5 MIPS 24-bit digital signal processor microprocessor operating at 24.576 MHz in a 100-pin plastic PQFP package. It is designed for high-speed fixed-point signal-processing applications. The verified distributor listings identify it as a 24-bit DSP microprocessor with external nonvolatile memory support and a 12.5 MIPS processing rate. A digital signal processor is a specialized microprocessor architecture optimized for repetitive numerical operations on sampled audio, communications, control, and instrumentation data. DSP processors combine a Harvard-style architecture, high-throughput computational units, data address generators, and program memory organization to execute filtering, transforms, mixing, modulation, and real-time control algorithms efficiently. Within the broader hierarchy, the ADSP-2100JP belongs to the DSP microprocessor and embedded signal-processing semiconductor categories. The principal verified features are a 24-bit processor, a 24.576 MHz clock rating, 12.5 MIPS throughput, external program and data memory interfaces, and a QFP-100 plastic package. Its fixed-point architecture emphasizes deterministic real-time operation rather than general-purpose software flexibility. The 100-pin package also provides substantially more interface capacity than a small microcontroller package, supporting integration of memory buses, serial interfaces, timing controls, interrupts, and system I/O. The ADSP-2100 family architecture is documented as a base for later single-chip DSP microcomputers, but the supplied records do not expose enough electrical detail to reproduce internal execution-unit behavior or memory timing without the manufacturer datasheet. Designers should therefore verify voltage rails, clock mode, wait-state requirements, bus timing, pin multiplexing, and reset behavior against the original Analog Devices documentation before schematic capture or PCB release. Typical uses include audio processing, industrial measurement, communications modulation, vibration analysis, closed-loop control, and embedded instrumentation. The part is best suited to systems already designed around the ADSP-2100 architecture or boards requiring direct preservation of processor, memory, and peripheral behavior. Because the available market evidence does not establish a current production lifecycle, purchasing teams should confirm availability, condition, and documentation before committing a new design. For drop-in sourcing, package identity alone is insufficient: a substitute must also match all 100 pins, supply voltages, clock requirements, memory interfaces, peripheral multiplexing, timing, and software assumptions. Keep the original PQFP footprint, power architecture, bus termination, and decoupling unchanged when qualifying any replacement, and validate it with the target system's memory and real-time signal-processing workloads.

詢價 聯絡我們
ADSP-2100KP - 12.5 MIPS DSP Processor | Analog Devices
ADSP-2100KP

ADSP-2100KP - 12.5 MIPS DSP Processor | Analog Devices

The Analog Devices ADSP-2100KP is a 12.5 MIPS DSP microprocessor designed for fixed-point, real-time signal-processing applications and supplied in a bulk package. The verified product data identifies it as an ADSP-2100-series processor; the comparison source additionally lists an 8.192 MHz clock rate and 5.00 V I/O operation. Its architecture combines a dedicated DSP core with external non-volatile memory support, making it suitable for systems that require deterministic arithmetic, compact control hardware, and programmable signal processing. A digital signal processor, or DSP, is a microprocessor architecture optimized for repetitive operations on streams of sampled data. DSP processors commonly support filtering, Fourier analysis, modulation, waveform generation, speech processing, and closed-loop control more efficiently than a general-purpose processor when the workload is dominated by multiply-accumulate operations. In the broader electronics hierarchy, the ADSP-2100KP belongs to the digital signal processor class, embedded processors, and the broader semiconductor category. The headline verified specifications are a 12.5 MIPS processing rate, an 8.192 MHz clock in the available comparison data, and 5.00 V I/O voltage. The processor uses external non-volatile memory, which separates program storage from the DSP itself and allows application-specific firmware to be selected during system design. The verified results describe an efficient ADSP-21xx device for real-time applications, but do not provide complete electrical limits, memory interfaces, or package dimensions in the supplied material. The ADSP-2100KP is intended for embedded real-time workloads where predictable execution and direct signal-data manipulation are more important than general desktop computing. External program and data memory can make the system architecture flexible, although the designer must account for bus timing, memory sizing, and the requirements of the selected memory devices. The fixed-point classification should be considered when selecting algorithms and assessing numeric range and precision. Typical applications include audio and communications signal conditioning, industrial measurement and control, instrumentation, embedded modem or modem-adjacent signal-processing functions, and real-time filtering. For these uses, the processor’s 12.5 MIPS rating provides a defined throughput figure for sizing the computational workload, while the 5.00 V I/O specification constrains the surrounding digital interfaces. A key design consideration is to verify the complete datasheet before releasing a PCB or production design because the supplied search results do not establish the exact pinout, package dimensions, memory configuration, clock tolerance, or full operating-temperature range. In particular, the bulk designation and comparison listings do not establish pin compatibility with another processor. This page combines the verified manufacturer-linked datasheet reference, distributor availability information, and cross-reference data with engineering guidance focused on real-time DSP integration, external memory, and procurement validation.

詢價 聯絡我們
ADSP-2101BG-50 - 16-Bit 25 MIPS DSP | Analog Devices
ADSP-2101BG-50

ADSP-2101BG-50 - 16-Bit 25 MIPS DSP | Analog Devices

The Analog Devices ADSP-2101BG-50 is an obsolete 16-bit single-chip digital signal processor delivering 25 MIPS performance from a 5 V supply. It features a 12.5 MHz clock, 512 RAM words, a 24-bit external data bus, and a PGA-68 ceramic pin-grid array package. The processor is intended for high-speed numeric processing in industrial audio, communications, control, and instrumentation systems. A digital signal processor, or DSP, is a semiconductor architecture optimized for arithmetic-intensive operations such as filtering, Fourier transforms, modulation, and real-time control. Within the product hierarchy, the ADSP-2101 belongs to the ADSP-2100 family of single-chip microcomputers. Its architecture combines computation units, data address generators, and a program sequencer, while on-chip memory reduces the time required to retrieve operands during signal-processing loops. The ADSP-2101BG-50 combines a 16-bit internal word length with a 24-bit external data path and provides 512 RAM words. According to the Analog Devices product page, the ADSP-21xx family architecture also includes a programmable timer and one or two serial ports, depending on the specific processor. The exact serial-port configuration and memory organization for this ordered variant must be confirmed against the ADSP-2101 datasheet before schematic capture. Operation from a single 5 V rail simplifies power-supply design in systems that previously required separate logic and analog supplies. The 12.5 MHz clock and 25 MIPS execution rate make the device suitable for real-time filter implementations, speech-processing functions, industrial control loops, and embedded signal analysis. The -50 ordering code identifies the particular speed grade, while BG denotes the PGA-68 package family used by this variant. Typical uses include industrial audio path processing, communications front ends, digital control, laboratory instrumentation, and legacy embedded DSP modules. Because the manufacturer lists ADSP-2101 as obsolete, new production designs should confirm availability before committing to the package, software toolchain, and external memory interface. The primary engineering constraint is that this is a legacy PGA-68 device rather than a modern fine-pitch package. Board layout must follow the package dimensions, pad pattern, and thermal requirements in the ADSP-2101 datasheet. A software-based replacement may be electrically preferable, but any migration must preserve the required throughput, memory capacity, peripheral set, and software compatibility. This page combines the manufacturer's ADSP-2101 documentation with distributor and catalog records for ADSP-2101BG-50. It also summarizes verified package, speed, voltage, and lifecycle information while providing practical guidance for obsolete-part sourcing, PCB reuse, and design verification.

詢價 聯絡我們
ADSP-2101BP-40 - 25 MIPS 16-Bit DSP | Analog Devices
ADSP-2101BP-40

ADSP-2101BP-40 - 25 MIPS 16-Bit DSP | Analog Devices

The Analog Devices ADSP-2101BP-40 is a single-chip 16-bit digital signal processor in a 68-lead PLCC package. It provides up to 25 MIPS of fixed-point processing performance, operates from a 5 V supply, and includes two serial ports. The device belongs to the ADSP-2100 family of DSP microcomputers and combines a DSP-oriented computation core, data address generators, program sequencer, on-chip memory, timers, and serial communication resources. A digital signal processor is a specialized microprocessor architecture optimized for filtering, signal transformation, spectral analysis, modulation, and other high-speed numeric operations. Unlike a general-purpose microprocessor, a DSP uses deterministic instruction timing, parallel data paths, and dedicated address-generation hardware to process continuous streams of samples efficiently. The ADSP-2100 family therefore occupies the hierarchy of DSP processor, embedded microprocessor, integrated circuit, and semiconductor. The ADSP-2101BP-40 combines a 16-bit architecture with 25 MIPS execution capability, 5 V operation, and two serial ports. These characteristics make it appropriate for industrial audio, communications, control, and instrumentation systems in which sampled data must be processed with predictable execution timing. Its PLCC package provides 68 accessible leads for power, clock, memory, serial-interface, and control connections, while the obsolete lifecycle status requires careful sourcing and end-of-life planning. The ADSP-21xx processors use a common core containing computation units, data address generators, and a program sequencer. Device variants differ in clock rating, on-chip program and data memory, serial-port count, and temperature options. Because processor timing and memory configuration affect both firmware behavior and external hardware requirements, engineers should confirm the complete ordering code and electrical limits against the Analog Devices datasheet before replacing an installed component. Typical uses include two-channel digital audio processing, low-rate modem and data-link functions, industrial vibration monitoring, measurement instrumentation, and embedded control loops with DSP-based filtering. In each case, the processor can perform filtering and signal conditioning while the two serial ports support converters, codecs, or communication peripherals. System timing should be derived from the device clock requirements rather than inferred solely from the MIPS rating. Design with the 68-lead PLCC footprint, 5 V supply rails, and the datasheet-defined clock and memory interface. Confirm operating-temperature requirements, external bus timing, reset behavior, and serial-port electrical characteristics before layout release. Because this device is obsolete, production continuity, inspection, or a like-for-like replacement assessment should begin before committing to a new design. This page combines manufacturer specifications, lifecycle status, package details, application guidance, comparison references, and practical sourcing considerations. It helps engineers separate confirmed device facts from unresolved parameters and make an informed decision when maintaining, redesigning, or sourcing this legacy DSP platform.

詢價 聯絡我們
ADSP-2101BP-50 - 16-Bit 12.5 MHz DSP | Analog Devices
ADSP-2101BP-50

ADSP-2101BP-50 - 16-Bit 12.5 MHz DSP | Analog Devices

Analog Devices ADSP-2101BP-50 is an obsolete 16-bit fixed-point digital signal processor with a 12.5 MHz clock, 3 kB of on-chip RAM, two serial ports, and a 68-pin PLCC package. It belongs to the ADSP-2100 family of single-chip microcomputers optimized for high-speed numeric processing, digital filtering, signal analysis, and embedded control. A digital signal processor, or DSP, is a semiconductor architecture designed to execute arithmetic-intensive operations efficiently. Unlike a general-purpose microprocessor, a DSP combines computation units, data address generators, and a program sequencer around operations such as multiplication, accumulation, and fast memory access. The ADSP-2101 places these functions together with program RAM, data RAM, a programmable timer, and serial communication resources for standalone signal-processing designs. The ADSP-2101BP-50 combines a 16-bit fixed-point arithmetic format with a 12.5 MHz operating clock. Its fixed-point architecture uses integer representations for real-valued calculations, allowing efficient implementation of filters, control loops, waveform generation, and spectral analysis. The processor includes 3 kB of RAM for data and program storage, two serial ports for peripheral or processor-to-processor communication, and a programmable timer for periodic and timing-related functions. Analog Devices describes the ADSP-21xx processors as members of a common-core family. This common core combines computation units, data address generators, and the program sequencer, while individual family members vary in memory capacity, clock speed, serial-port count, and package configuration. The ADSP-2101 is positioned as a single-chip solution for applications requiring deterministic numeric processing without a separate external microprocessor. Typical uses include audio signal processing, industrial measurement, communications filtering, vibration analysis, control systems, and embedded instrumentation. The two serial ports can support synchronous or asynchronous peripheral links, while the timer supports event scheduling and sampling functions. For designs that use the processor as the system controller, the on-chip RAM and timer reduce the amount of external logic required for basic acquisition and processing tasks. The 68-pin PLCC package makes ADSP-2101BP-50 suitable for legacy systems designed around surface-mount leaded-chip carriers. PCB layout should preserve the manufacturer's pin assignments and provide suitable bypass capacitance at the power-supply pins. Because the device is obsolete, new production designs should verify availability and long-term sourcing before committing to it, while repairs and industrial equipment can use it as a functional replacement for an installed original part. This product page combines the manufacturer's family architecture, package information, operating limits, and exact-ordering details with practical replacement guidance. It also distinguishes verified 12.5 MHz ADSP-2101BP-50 parameters from higher-speed family variants so engineers can assess clock, memory, package, and lifecycle differences before changing a production PCB.

詢價 聯絡我們
ADSP-2101BP-66 - 16.67 MHz 24-Bit DSP | Analog Devices
ADSP-2101BP-66

ADSP-2101BP-66 - 16.67 MHz 24-Bit DSP | Analog Devices

The Analog Devices ADSP-2101BP-66 is a single-chip 24-bit digital signal processor based on the ADSP-2100 family architecture, operating at 16.67 MHz and delivering 25 MIPS of computation. The device is supplied in a 68-lead J-lead plastic leaded-chip carrier package, identified as package code QCCJ in distributor records. It combines a core DSP architecture, computation units, data address generators, a program sequencer, on-chip program and data memory RAM, a programmable timer, and serial-port resources for embedded signal-processing workloads. A digital signal processor, commonly abbreviated DSP, is a specialized microprocessor architecture optimized for recurring operations such as filtering, Fourier transforms, modulation, signal synthesis, and control calculations. DSP processors belong to the broader embedded processing and semiconductor hierarchy. Compared with a general-purpose microcontroller, the ADSP-2100 architecture emphasizes deterministic arithmetic throughput, dedicated data movement, and efficient execution of signal-processing algorithms. The ADSP-2101BP-66 is specified by Analog Devices as a 16-bit processor with a 24-bit architecture and 16.67 MHz clock. Its ADSP-2100 family core provides 25 MIPS, while the integrated memory, timer, and serial interfaces reduce the need for external support logic. These characteristics make the processor suitable for industrial audio, communications, control, instrumentation, and embedded DSP systems. Analog Devices identifies the ADSP-2101 family as obsolete, so new designs should verify migration requirements and long-term sourcing before committing to this device. The BP suffix denotes the leaded-chip-carrier package, while the -66 suffix identifies the 16.67 MHz speed grade. The device is specified for industrial-temperature operation from -40°C to 85°C and is supplied in bulk packaging according to the available product record. The 68-pin footprint also requires careful PCB layout, particularly for the high-density J-lead geometry and its associated assembly requirements. A practical design decision is whether the original ADSP-2101 architecture remains necessary. Legacy industrial and communications systems may need a source-compatible procurement path, but a modern DSP, MCU, or SoC can provide wider tooling support and greater longevity. For a new design, compare processor throughput, memory, serial-interface requirements, software ecosystem, operating temperature, package geometry, and availability rather than selecting only by clock frequency. This product summary consolidates the manufacturer overview with exact package, frequency, temperature, and lifecycle information. It also distinguishes verified characteristics from design parameters that still require confirmation in the manufacturer datasheet, helping engineers plan sourcing, schematic review, PCB layout, and legacy-system maintenance with fewer assumptions.

詢價 聯絡我們
ADSP-2101BS-40 - 16-Bit 25 MIPS DSP | Analog Devices
ADSP-2101BS-40

ADSP-2101BS-40 - 16-Bit 25 MIPS DSP | Analog Devices

Analog Devices ADSP-2101BS-40 is an obsolete 16-bit, 25 MIPS single-chip digital signal processor in an 80-lead plastic QFP package. The processor operates from a 5 V supply, includes two serial ports, and is positioned for high-speed numeric signal-processing applications. Its architecture belongs to the ADSP-2100 family of DSP microcomputers, combining core computation units, data address generators, and a program sequencer. A digital signal processor, or DSP, is a microprocessor optimized for arithmetic-intensive operations on continuously changing or sampled data. Unlike a general-purpose CPU, a DSP typically uses deterministic execution, dedicated addressing hardware, and parallel computation to process filters, transforms, control loops, and other numerical workloads efficiently. In the electronic-component hierarchy, the ADSP-2101 belongs to the DSP, microprocessor, integrated-circuit, and semiconductor categories. The ADSP-2101 family integrates the common DSP core, data address generators, and program sequencer while adding on-chip program and data memory RAM, a programmable timer, and two serial ports. According to Analog Devices, this combination supports compact embedded signal-processing designs without requiring a separate processor, external memory interface, and multiple peripheral devices. The 16-bit architecture and 25 MIPS instruction throughput are particularly relevant to filtering, waveform analysis, communications, and real-time control. The ADSP-2101BS-40 ordering designation identifies the industrial-temperature 80-lead package variant. One distributor record identifies the component as a 16-bit digital signal processor with a 10.24 MHz clock and QFP-80 package, while the manufacturer describes the ADSP-2101 family as operating from 5 V with two serial ports. Exact RAM capacity, pin assignments, electrical limits, and operating-temperature boundaries should be confirmed in the manufacturer data sheet before schematic capture or PCB release. Typical engineering uses include industrial control, instrumentation, communications signal conditioning, audio processing, and embedded real-time filtering. The two serial ports can support sensor data input, peripheral expansion, or communication with external converters and controllers. For designs requiring deterministic numerical processing, the processor's dedicated architecture is generally more appropriate than a general-purpose microcontroller, although the complete software toolchain and obsolete product status must be considered. Design planning should begin with the ADSP-2101 hardware manual and data sheet, then confirm clock, memory, serial-interface, and pin-level requirements against the exact -40 variant. Because the manufacturer lists the product as obsolete, long-lived or safety-relevant designs should assess obsolescence risk, software support, sourcing continuity, and the availability of a current processor family before committing to a new production platform. This page consolidates the manufacturer's product status, package and performance details, replacement assessment, comparison guidance, and practical design cautions into one engineering-focused reference. It also distinguishes verified drop-in replacements from modern alternatives that may require a redesigned PCB or different software architecture.

詢價 聯絡我們
ADSP-2101BS-50 - 12.5 MHz 16-Bit DSP | Analog Devices
ADSP-2101BS-50

ADSP-2101BS-50 - 12.5 MHz 16-Bit DSP | Analog Devices

The Analog Devices ADSP-2101BS-50 is a 16-bit fixed-point digital signal processor operating at a 12.5 MHz clock frequency, with 3 kB of RAM and a surface-mount PQFP-80 plastic package. It combines a dedicated DSP computation core, data address generators, and a program sequencer for high-speed numeric processing in embedded audio, communications, control, and instrumentation systems. A digital signal processor is a specialized microprocessor architecture optimized for real-time filtering, signal analysis, waveform generation, and control algorithms. DSP processors combine multiply-accumulate operations with deterministic instruction execution and dedicated addressing hardware. Within the product hierarchy, the ADSP-2101 belongs to the ADSP-2100 family of single-chip digital signal processors and integrates computational, memory, timing, and serial-interface functions for compact embedded signal-processing designs. Key device characteristics include a 12.5 MHz maximum clock, 16-bit fixed-point processing, 3 kB of RAM, and a PQFP-80 surface-mount package. The device uses 5 V for both its core and I/O according to the component listing. Its fixed-point architecture is suited to cost-sensitive control and signal-processing tasks where integer multiply-accumulate performance, predictable timing, and compact embedded implementation are more important than floating-point flexibility. The ADSP-21xx architecture uses a common core containing computation units, data address generators, and a program sequencer. Family members add different combinations of on-chip program and data memory RAM, a programmable timer, serial ports, and host-interface functions. The ADSP-2101 is positioned as a smaller member of this architecture, making it appropriate for embedded applications requiring dedicated arithmetic throughput without the complexity of a general-purpose microprocessor. Typical uses include digital audio filtering, modulation and demodulation support, motor and industrial control loops, measurement instrumentation, and embedded communications functions. The 3 kB RAM supports short instruction and working-data segments, while the PQFP-80 package provides 80 external connections for processor, memory, serial-interface, control, and power functions. Existing firmware can be adapted when moving among compatible ADSP-2100-family processors. Designers should review the ADSP-2101 datasheet for the exact pin assignment, memory organization, electrical limits, timing requirements, and supported development environment before layout or firmware release. Power and clock distribution, decoupling, program-memory configuration, and signal-integrity practices remain central to obtaining stable operation in a PQFP-80 design. This product page brings together the component specifications, package information, application context, sourcing guidance, and design considerations needed to evaluate the ADSP-2101BS-50 for an embedded DSP design.

詢價 聯絡我們
ADSP-2101KP-66 - 16-Bit 25 MIPS DSP | Analog Devices
ADSP-2101KP-66

ADSP-2101KP-66 - 16-Bit 25 MIPS DSP | Analog Devices

Analog Devices ADSP-2101KP-66 is a 16-bit fixed-point DSP microprocessor with a 25 MIPS execution rate, 5 V supply, two serial ports, and on-chip memory. The processor is packaged in a 68-pin PLCC and uses the ADSP-21xx enhanced Harvard architecture, which provides an instruction bus and dual data buses for parallel instruction execution and data transfer. Independent arithmetic logic, multiplier-accumulator, and shifter units support efficient filtering, signal transformation, and control algorithms. A digital signal processor, or DSP, is a specialized microprocessor architecture optimized for repeated mathematical operations on sampled data. Within the product hierarchy, the ADSP-2101 belongs to the 16-bit fixed-point DSP microprocessor family and combines a dedicated execution engine, memory, timers, serial communications, and control logic in one integrated circuit. This integration reduces external data-movement overhead compared with a general-purpose processor performing the same signal-processing workload. The ADSP-2101KP-66 provides three principal computation units: an ALU, a multiplier-accumulator, and a shifter. Its enhanced Harvard architecture separates program instruction access from the two data buses, allowing independent computational and memory operations. Two serial ports add communication capability for connecting the processor to converters, transducers, storage devices, or other digital systems. On-chip program and data memory reduce the amount of external memory required for many embedded signal-processing tasks. The manufacturer identifies the ADSP-2101 family as an obsolete single-chip microprocessor product, so ADSP-2101KP-66 should be treated as a lifecycle-limited design choice rather than a new platform. The -66 ordering code identifies the qualified 68-pin PLCC configuration, while the family is described as operating from 5 V and reaching 25 MIPS. Detailed clock, memory-capacity, timer, electrical-limit, and environmental figures should be confirmed against the manufacturer datasheet before a new production design is released. Typical applications include industrial control, industrial automation, audio and communications signal processing, communications equipment, instrumentation, and embedded control systems. The DSP architecture is especially useful where multiply-accumulate operations, sampling, filtering, modulation, or feedback control dominate the workload. Because the processor is obsolete, engineers should also evaluate whether a currently supported DSP or microcontroller can provide equivalent functions before beginning a new design. Design work should account for the PLCC package, 5 V power architecture, external clock and reset implementation, memory interface requirements, and serial-port signal integrity. Use the pin-description table and hardware manual in the manufacturer documentation when assigning PCB tracks or planning a replacement. A modernization project should preserve the external interface where practical while accounting for software-tool, instruction-set, and lifecycle differences in newer processors. This product page consolidates the confirmed processor architecture, package information, lifecycle status, sourcing details, and design implications into one engineering-oriented reference. It also distinguishes true package-compatible alternatives from broader ADSP-21xx family members and highlights the migration checks that matter when replacing an obsolete DSP.

詢價 聯絡我們
ADSP-2101KS-40 - 16-Bit, 25 MIPS DSP | Analog Devices
ADSP-2101KS-40

ADSP-2101KS-40 - 16-Bit, 25 MIPS DSP | Analog Devices

Analog Devices ADSP-2101KS-40 is a 16-bit fixed-point digital signal processor with a 10.24 MHz clock, 25 MIPS processing performance, two serial ports, and a plastic PQFP-80 package. It belongs to the ADSP-21xx processor family, an early single-chip DSP architecture that combines a DSP compute core, data address generators, a program sequencer, timer resources, and serial communications. A digital signal processor is a specialized microprocessor architecture optimized for repetitive numerical operations on sampled audio, control, communications, and instrumentation signals. Its hardware data generators can move operands between memory and computation units with predictable instruction timing. Within the product hierarchy, the ADSP-2101 is a DSP processor, a specialized form of microprocessor and embedded processing IC used when deterministic real-time signal processing is more valuable than general-purpose software flexibility. The manufacturer identifies the ADSP-2101 as a 16-bit processor capable of 25 MIPS. Its two serial ports support communication with converters, codecs, transducers, and other serial peripherals. The ADSP-21xx family uses a common DSP core containing computation units, data address generators, and a program sequencer. Differentiating resources include on-chip program and data memory RAM, a programmable timer, and one or two serial ports depending on the family member. The ADSP-2101KS-40 ordering code identifies a plastic 80-pin quad flat pack variant of the ADSP-2101. The listed electrical headline is a 5 V supply alongside the 10.24 MHz operating clock. Its fixed-point-oriented 16-bit architecture is designed for high-throughput fixed-point algorithms rather than floating-point workloads. Confirm package dimensions, pin assignments, memory organization, and interface electrical limits against the Analog Devices ADSP-2101 data sheet before laying out a replacement board. Typical uses include industrial control, digital audio and communications, instrumentation, embedded signal conditioning, and real-time filter or waveform-processing systems. The two serial ports can connect the processor to external codecs, data converters, sensors, and host controllers. ADSP-21xx development tools and manuals support application development, emulation, and programming, which makes the processor suitable for legacy systems that already use this architecture and tool chain. When designing around this obsolete processor, validate processor availability, software support, clock requirements, and the complete 80-pin land pattern before committing to a new production design. Existing equipment can be maintained with a carefully verified procurement strategy, while new products should generally use a currently supported processor unless preserving the ADSP-2101 architecture provides a decisive engineering benefit. This page organizes the verified ADSP-2101KS-40 identity, core operating characteristics, family architecture, lifecycle position, and sourcing questions. It also distinguishes the exact ordered part from generic ADSP-2101 family references and provides practical guidance for legacy maintenance, board compatibility, and replacement planning without treating functionally similar processors as verified pin-to-pin substitutes.

詢價 聯絡我們
ADSP-2101KS-80 - 20MHz 16-Bit DSP | Analog Devices
ADSP-2101KS-80

ADSP-2101KS-80 - 20MHz 16-Bit DSP | Analog Devices

Analog Devices ADSP-2101KS-80 is an obsolete 16-bit fixed-point digital signal processor with a 20 MHz clock, 25 MIPS processing capability, and a 5 V supply in an 80-pin PQFP package. The processor is designed for embedded signal-processing systems requiring deterministic execution, dedicated data buses, and integrated program and data memory. Its enhanced Harvard architecture separates instruction access from the two data buses, supporting parallel computation and efficient DSP instruction execution. A digital signal processor, or DSP, is a specialized microprocessor architecture optimized for filtering, signal analysis, control, and communications. The ADSP-2101 belongs to the DSP microprocessor and embedded signal-processing IC hierarchy rather than the general-purpose MCU category. Its fixed-point arithmetic, multiple data paths, and Harvard-style memory organization are intended to sustain repetitive mathematical operations with predictable cycle timing. Key characteristics include a 16-bit data bus, 20 MHz operating clock, 25 MIPS throughput, and two serial ports. The on-chip memory supports self-contained real-time processing, reducing external memory access in suitable control paths. A listed 3 kB RAM figure indicates that some designs can keep working data and state close to the processor, although the final memory allocation must be confirmed from the manufacturer datasheet before software or board planning. The ADSP-2101 family uses a common core containing computation units, data address generators, and a program sequencer. Family members differentiate themselves through on-chip program and data RAM, programmable timers, and one or two serial ports. This organization favors deterministic real-time operation in audio processing, industrial control, communications, instrumentation, and embedded signal-filtering systems where predictable execution is more important than general operating-system flexibility. Typical applications include embedded audio, industrial motor and process control, communications interface processing, measurement instrumentation, and digital filtering. For a new design, the 20 MHz clock and 5 V supply should be evaluated against the required arithmetic load, while both serial ports can support peripheral or communications links when their electrical and protocol characteristics match the system requirements. Board design must account for the older PQFP footprint, 5 V power distribution, decoupling, clock quality, and programming or emulation requirements. Because the component is obsolete, production continuity and legacy-system maintenance require careful lifecycle planning, particularly for designs that cannot be redesigned without disruption. This product record combines lifecycle information, package details, application guidance, design considerations, and technically filtered replacement analysis. It also identifies the unresolved package and pinout details that must be confirmed against the manufacturer documentation before a footprint-compatible redesign is attempted.

詢價 聯絡我們
ADSP-2101TG-40 - 16-Bit 25 MIPS DSP | Analog Devices
ADSP-2101TG-40

ADSP-2101TG-40 - 16-Bit 25 MIPS DSP | Analog Devices

Analog Devices ADSP-2101TG-40 is an obsolete 16-bit, 25 MIPS single-chip digital signal processor operating from a 5 V supply and integrating two serial ports. The device is packaged in a 68-pin PGA package and is identified with a military temperature grade. Its combination of fixed-point processing capability, integrated serial interfaces, and a legacy-compatible PGA package makes it relevant to repair, migration, and controlled obsolescence programs. A digital signal processor, or DSP, is a microprocessor architecture optimized for arithmetic-intensive operations on streams of sampled data. Unlike a general-purpose processor, a DSP emphasizes multiply-accumulate throughput, deterministic execution, and data movement through dedicated memory and addressing resources. Within the product hierarchy, the ADSP-2101 belongs to the ADSP-21xx family of 16-bit processors and combines a core DSP architecture, data address generators, and a program sequencer. The ADSP-21xx family combines on-chip program and data memory RAM, a programmable timer, and one or two serial ports. The ADSP-2101TG-40 is specifically identified as a 24-bit, 10.24 MHz device, a 16-bit processor capable of 25 MIPS throughput, and a 5 V integrated circuit. Two integrated serial ports reduce the need for separate interface components in communications, control, and signal-processing designs. The processor uses a dedicated DSP computation architecture rather than a general-purpose instruction set. Its 16-bit arithmetic format and 25 MIPS execution rate make it suitable for real-time filtering, waveform generation, modulation, and embedded control calculations. The 10.24 MHz clock figure and 24-bit device classification should be interpreted together with the manufacturer's family documentation when configuring timing, memory, and peripheral settings. Typical legacy applications include industrial signal processing, telecommunications, audio and waveform processing, motor control, and embedded instrumentation. The two serial ports can support synchronous or asynchronous peripheral traffic where the required interface format and timing match the ADSP-21xx architecture. Software migration should use the Analog Devices ADSP-21xx manuals and the established VisualDSP++ development flow identified by the manufacturer. Before starting a new design, verify every pin, voltage, timing parameter, and environmental requirement against the manufacturer data sheet and the appropriate package drawing. Existing equipment can require this processor's architectural and software compatibility, so a redesign that changes the processor family should include hardware, firmware, timing, and qualification validation rather than relying only on package dimensions. This page consolidates the identified processor architecture, package, lifecycle, application, and sourcing details into an engineering-focused reference. It also distinguishes documented characteristics from parameters that require confirmation against the original data sheet, helping teams evaluate whether the ADSP-2101TG-40 remains appropriate for a legacy repair or modernization program.

詢價 聯絡我們
ADSP-2103BP-40 - 24-Bit 10.24 MHz DSP | Analog Devices
ADSP-2103BP-40

ADSP-2103BP-40 - 24-Bit 10.24 MHz DSP | Analog Devices

The Analog Devices ADSP-2103BP-40 is a 24-bit fixed-point digital signal processor operating at 10.24 MHz, with 3 kB of on-chip RAM and a 68-pin plastic leaded chip carrier package. It belongs to the ADSP-2100 family of DSP microcomputers, combining a dedicated signal-processing core, data address generators, program sequencer, and integrated program and data memory. A digital signal processor is a microprocessor architecture optimized for filtering, waveform generation, spectral analysis, and other operations involving repeated multiply-accumulate calculations. DSP processors sit between general-purpose microprocessors and dedicated function-specific controllers: they retain programmable software control while accelerating arithmetic-heavy signal chains. The ADSP-2103 applies this architecture to compact embedded processing tasks where deterministic numerical computation and compact integration are important. The ADSP-2103BP-40 uses a 24-bit architecture and a 10.24 MHz clock, while its 3 kB RAM provides on-chip working storage for program and data. The fixed-point format supports integer-based digital signal processing and avoids requiring a separate floating-point unit. Its 68-pin PLCC package supports surface-mount assembly and provides a defined lead arrangement for compact control and processing boards. The ADSP-2100 family shares a common core containing computation units, data address generators, and a program sequencer. Family members differentiate themselves through memory capacity, serial-port resources, timers, and other integrated functions. Because software support and external hardware requirements depend on the selected family member and complete application architecture, designers should consult the ADSP-2100 family documentation before finalizing memory, clock, and peripheral assignments. Typical uses include industrial motor and process control, communications filtering, audio and speech processing, instrumentation, vibration analysis, and embedded measurement systems. In these systems, the processor can implement finite impulse response and infinite impulse response filters, signal transforms, control loops, and data-acquisition algorithms while coordinating inputs from converters and sensors. PCB design should preserve the package pin arrangement and provide clean power, ground, clock, and signal routing. Decoupling capacitors should be placed close to the supply pins, while clock and high-speed signal paths should avoid noisy switching nodes. The designer should also confirm the required external memory interface, serial communications connections, and programming configuration from the manufacturer documentation. This page combines the ADSP-2103BP-40 identity, package and timing information with application guidance, family alternatives, and design-focused selection criteria. These engineering references help teams evaluate the processor, plan board layouts, and identify where a software or architecture review is needed before production implementation.

詢價 聯絡我們