ADSP-1410JD - 16-Bit DSP Address Sequencer | Analog Devices
MPN： ADSP-1410JD ✗ 停產ADSP-1410JD 概覽
A bit-slice processor is a digital signal processor implementation in which multiple narrow processing slices operate in parallel to form a wider arithmetic word. The ADSP-1410 belongs to this processor family, while its microprogram sequencer controls instruction sequencing and address generation. Within the hierarchy of signal processing, it is a specialized DSP rather than a general-purpose microcontroller, making it useful where deterministic address sequencing or FFT/DSP-oriented control is required.
Key verified characteristics include a 16-bit external data bus width, a nominal 5 V supply, a 10 MHz maximum clock frequency, 48 terminals, commercial temperature grade, and through-hole mounting. The ceramic side-brazed DIP package provides mechanical robustness for industrial systems and legacy equipment. Distributor records also describe the device as a bit-slice microprocessor with a microprogram sequencer, emphasizing its specialized architecture rather than conventional software-controlled execution.
The ADSP-1410JD is positioned for legacy digital signal processing, FFT/DSP address sequencing, industrial control, communications infrastructure, and equipment requiring a dedicated high-speed sequencing engine. Because public search results do not expose a complete official pinout or detailed timing tables, system integrators should obtain the manufacturer documentation before making board-level substitutions or timing decisions.
A key design constraint is supply and clock integrity. A nominal 5 V operating rail should be generated with suitable bypass decoupling, while the 10 MHz clock must be clean and stable to avoid sequencing errors. Existing systems should preserve the original footprint, pin assignments, voltage requirements, and clocking scheme; functional similarity alone does not establish drop-in compatibility.
This page combines verified distributor specifications, package and sourcing details, application guidance, and qualification limits for the ADSP-1410JD. It also distinguishes confirmed technical facts from information that still requires the original manufacturer datasheet, helping engineers evaluate procurement and redesign decisions without overstating equivalence.
直接替換替代品，適用於 ADSP-1410JD — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： ADSP-1410JD （相同外形與佔位） — 差異在於 Function, Temperature Grade.
此產品無可直接替換的替代品。
申請替代品ADSP-1410JD 規格
| Processor Type | 16-bit bit-slice microprocessor and microprogram sequencer |
| External Data Bus Width | 16 bit |
| Nominal Supply Voltage | 5 V |
| 最大時脈頻率 | 10 MHz |
| Terminal Count | 48 |
| Package Code | DIP |
| Package Description | 48-CDIP, side-brazed ceramic |
| 安裝類型 | Through-hole |
| Package Body Width | 0.600 inch (15.24 mm) |
| Temperature Grade | Commercial |
| 功能 | FFT/DSP address sequencing |
| Architecture | Bit-slice processor |
| Control Mechanism | Microprogram sequencer |
| Manufacturer | Analog Devices |
| Availability | 1.503 units in stock at FPGACenter as of 2026-10-23 |
ADSP-1410JD 0.600 inch (15.24 mm) 腳位配置指南
ADSP-1410JD（0.600 inch (15.24 mm) 封裝）的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料： ADSP-1410JD.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADSP-1410JD 適用於 6 應用s: Legacy FFT Address Sequencing, Industrial Signal-Processing Control, Communications Infrastructure Equipment, Instrumentation and Measurement Control, Digital Signal Processing System Maintenance, Legacy Embedded DSP Platform.
Legacy FFT Address Sequencing
The ADSP-1410JD fits legacy FFT and DSP address-sequencing systems because distributor records explicitly identify it as a bit-slice microprocessor with a microprogram sequencer, a 16-bit external data bus, and a maximum clock frequency of 10 MHz. It can act as the dedicated sequencing engine for address generation and control in older signal-processing architectures. The implementation should preserve the original microcode and bus timing because the supplied data does not include detailed cycle-by-cycle timing or complete electrical limits.
推薦
Industrial Signal-Processing Control
The ADSP-1410JD is suited to maintaining specialized industrial signal-processing control in equipment built around its 10 MHz bit-slice architecture. Its commercial temperature grade and 48-CDIP ceramic package support through-hole legacy platforms, while the microprogram sequencer provides deterministic control for address and timing functions. Engineers should use a stable nominal 5 V rail and preserve the original clock distribution. Detailed supply-current and temperature-limit data must be obtained before finalizing a new power design.
推薦
Communications Infrastructure Equipment
ADSP-1410JD can be retained in legacy communications infrastructure where a dedicated DSP sequencer controls repeated address-generation or microprogrammed operations. Its 16-bit external data bus and 10 MHz maximum clock provide an established interface basis, while the through-hole 48-CDIP package simplifies repair of older boards. Preservation should include the original oscillator circuit, reset behavior, bus timing, and microcode. A modern replacement requires complete pin and timing validation rather than similarity based only on the ADSP-1410 family name.
推薦
Instrumentation and Measurement Control
The ADSP-1410JD is applicable to legacy instrumentation systems that use deterministic microprogrammed sequencing for data acquisition and processing control. Its 10 MHz maximum clock and 16-bit external bus suit established bit-slice interfaces, and the ceramic DIP package provides a serviceable through-hole footprint. For bench instruments, clock jitter and supply decoupling can affect repeatable measurements. Engineers should retain the original timing chain and verify grounding because the supplied records do not provide noise, jitter, or supply-current limits.
推薦
Digital Signal Processing System Maintenance
ADSP-1410JD is especially relevant for maintenance teams sustaining older DSP systems whose address sequencing depends on established microcode. The 48-CDIP side-brazed ceramic package is mechanically straightforward to inspect and replace on through-hole boards, and the commercial grade fits controlled indoor environments. Repair success depends on retaining the exact microcode, clock frequency, supply voltage, and pin assignments. Because no equivalent was verified, procurement should focus on original or traceable inventory rather than an unqualified substitute.
推薦
Legacy Embedded DSP Platform
The ADSP-1410JD can support a legacy embedded DSP platform that depends on bit-slice arithmetic and microprogrammed sequencing rather than a conventional instruction-set processor. Its 16-bit external data bus and 10 MHz maximum clock define the principal integration constraints, while the 48-pin ceramic DIP package supports older through-hole assembly methods. New designs should not assume that a modern DSP is drop-in compatible. Migration requires reworking the board, microcode, bus interface, clocking, and power distribution as a complete engineering effort.
推薦
推薦產品摘要
工程參考資料，適用於 ADSP-1410JD — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Analog Devices |
| Package | 48-CDIP side-brazed ceramic, 0.600 inch (15.24 mm) |
| Processor Architecture | 16-bit bit-slice microprocessor with microprogram sequencer |
| External Data Bus Width | 16 bit |
| Nominal Supply Voltage | 5 V |
| Maximum Clock Frequency | 10 MHz |
| Terminal Count | 48 |
| Temperature Grade | Commercial |
| Mounting Type | Through-hole |
| Starting Price | $62.50 as of 2026-10-23 |
主要差異化特點
- Specialized legacy sequencing architecture (對比ADSP-1410TD)
- Verified ceramic through-hole construction (對比ADSP-1410TD)
- Documented commercial-grade configuration (對比ADSP-1410TD)
- Traceable sourcing visibility (對比ADSP-1410TD)
設計說明
Design the legacy ADSP-1410JD board around its verified nominal 5 V supply. Place the manufacturer's recommended input and bypass capacitors at the supply pins and route them with short, low-inductance paths to the device. The supplied records do not state supply-current limits, voltage tolerance, or capacitor values, so do not derive them by assumption; obtain the original datasheet and reference schematic before releasing a new layout.
Preserve the original 48-CDIP footprint, pin numbering, and through-hole access pattern when repairing or cloning an existing board. The package is side-brazed ceramic and mechanically sensitive to thermal or mechanical stress, so use controlled insertion and removal procedures. Verify every signal against the manufacturer pinout because the verified web data establishes the 48-terminal package but does not expose the complete pin table.
Treat the ADSP-1410JD clock as a timing-critical signal because the verified maximum frequency is 10 MHz. Route the clock away from noisy switching nodes, keep the oscillator or source close to the device, and maintain controlled return paths under the original board stack-up. Exact rise/fall, setup, hold, and jitter limits are unavailable in the supplied sources and must be checked in the manufacturer datasheet before tuning the timing chain.
Do not treat a similarly named ADSP-1410 suffix as an automatic substitute. The supplied cross-reference data mentions ADSP-1410TD but does not establish identical pins, temperature grade, package construction, or timing. A valid migration requires comparison of all 48 pins, microcode behavior, bus timing, clock limits, supply requirements, and lifecycle status. Otherwise, source original or traceable ADSP-1410JD inventory for maintenance work.
合規資訊
The supplied verified data identifies the part as a commercial-grade legacy ceramic DIP processor but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is recorded as not applicable because this is not an automotive-qualified automotive product in the provided information.
