積體電路

子分類

📁 ADC/DAC 3,100+ 產品 📁 放大器 IC 1,700+ 產品 📁 音訊編解碼器 18 產品 📁 音訊 IC 2 產品 📁 時脈與計時 640+ 產品 📁 Comparator ICs 1 產品 📁 DSP 1,100+ 產品 📁 資料擷取 IC 2 產品 📁 數位電位器 4 產品 📁 顯示驅動器與控制器 1 產品 📁 FPGA 與 CPLD 7,100+ 產品 📁 介面 IC 3,100+ 產品 📁 LED 驅動器 1 產品 📁 邏輯 IC 450+ 產品 📁 記憶體 IC 870+ 產品 📁 微控制器 20,000+ 產品 📁 微處理器 4 產品 📁 馬達驅動器 1 產品 📁 其他 1 產品 📁 感測器與偵測器介面 1 產品 📁 特殊用途 IC 15 產品 📁 視訊 IC 13 產品

產品（38,000+)

THS6042CD - 350mA ±12V ADSL CPE Driver | Texas Instruments
THS6042CD

THS6042CD - 350mA ±12V ADSL CPE Driver | Texas Instruments

The Texas Instruments THS6042CD is a high-speed, high-output-current operational amplifier and ADSL CPE line driver delivering 350 mA from a ±12 V supply in an 8-pin SOIC package. It is designed for analog signal conditioning, line-driver, and communications-interface circuits where low distortion, adequate slew capability, and source-current capacity are important. An operational amplifier is an active analog signal-conditioning device that uses high open-loop gain to amplify voltage differences. Within the broader semiconductor hierarchy, the THS6042CD belongs to the operational-amplifier family, which falls under amplifier ICs and analog signal-chain components. Its current-output capability distinguishes it from conventional low-current voltage-feedback amplifiers used only around precision analog signals. The verified product information identifies a 350 mA output-current rating, a ±12 V operating supply, and an 8-SOIC package. The Mouser listing also classifies the device as a high-speed operational amplifier for 350 mA ±12 V ADSL CPE line-driver applications. These characteristics make it relevant to designs requiring a signal amplifier to drive a terminated line, transformer, or communications interface rather than merely provide voltage gain. The THS6042CD combines an amplifier core with line-driving capability in a compact surface-mount package. Because it dissipates power while operating, the total supply voltage, output swing, load, and ambient temperature must be considered together. Its SOIC-8 format simplifies assembly and allows reuse of conventional eight-pin analog layouts, but exposed-pad thermal performance is not available from the supplied data. Typical applications include ADSL customer-premises-equipment line interfaces, communications transmitters, industrial signal conditioning, and low-frequency power-driver stages. In each case, the 350 mA current capability offers more drive than a standard small-signal amplifier, while the ±12 V supply supports bipolar output swing around ground. Designers should verify the required output swing, load impedance, stability, slew rate, bandwidth, and thermal margin against the manufacturer datasheet before production release. Cable or transformer loading, DC offset, and excessive capacitive loading can materially affect distortion and stability, particularly when using a high-current amplifier outside its most favorable operating region. This page consolidates the verified distributor listings, package information, current sourcing reference, and same-family replacement findings. It also distinguishes documented facts from specifications requiring confirmation, providing practical context for evaluating the THS6042CD in ADSL CPE and other high-current analog-driver designs.

詢價 聯絡我們
THS6042ID - 350mA ADSL CPE Line Driver | Texas Instruments
THS6042ID

THS6042ID - 350mA ADSL CPE Line Driver | Texas Instruments

The Texas Instruments THS6042ID is a 350 mA high-speed DSL line driver designed for ADSL and power-line communication equipment, operating from a ±12 V supply in an 8-pin SOIC package. It is intended to transmit signals from the remote terminal toward the central office while providing high output-current capability for transformer-coupled lines. A DSL line driver is a specialized interface IC that conditions high-frequency signals for transmission over copper, telephone, or power-line networks. The THS6042 belongs to the broader line-driver and interface-IC hierarchy, where its role is to combine high-speed signal handling with enough output drive to overcome line impedance and losses. Its dual-driver configuration suits equipment requiring more than one transmitted signal channel. Key characteristics include 350 mA output drive, operation from dual ±12 V supplies, and low distortion of -79 dBc when driving a 100 ohm load with a 2 Vpp signal. The device draws only 8.2 mA of supply current per channel. Its noninverting current noise is 2.1 pA/Hz, and the family supports full-rate ADSL and G.Lite service while remaining compatible with a 1:1 transformer ratio. The architecture is tailored for low-voltage, high-speed differential line transmission. A high 43 Vpp output swing provides useful dynamic range for overcoming attenuation in subscriber-line networks, while the current capability allows direct coupling to suitable external networks and transformers. Low noise and distortion help preserve signal integrity in the transmit path, particularly when small analog or mixed-signal information is represented by a high-speed line waveform. Typical applications include ADSL customer-premises equipment, central-office line-interface equipment, PLC line drivers, telephone-line termination circuits, and other high-speed copper-pair transmitters. The THS6042 is especially relevant where a ±12 V rail is already available and the designer needs a dedicated line-driver function rather than a general-purpose operational amplifier. Design attention should focus on supply decoupling, transformer or termination-network selection, controlled board layout, and thermal behavior at maximum output drive. Keep high-current return paths short and place input and output components to minimize parasitic feedback. Because the device dissipates power in proportion to output voltage and current, verify worst-case load conditions and provide adequate copper area around the SOIC pins. This page organizes the key electrical characteristics, application guidance, package details, and qualified replacement information into an engineering-focused reference for selecting and implementing the THS6042ID in high-speed DSL line-interface designs.

詢價 聯絡我們
THS6043CD - 350mA ±12V ADSL Line Driver | Texas Instruments
THS6043CD

THS6043CD - 350mA ±12V ADSL Line Driver | Texas Instruments

The Texas Instruments THS6043CD is a dual, low-power ADSL CPE line driver rated for 350 mA per channel and operation from dual ±12 V supplies. The device provides two line-driver channels and two shutdown-control inputs in a 14-pin SOIC package. Its design targets full-rate ADSL and G.Lite customer-premises equipment connected to 1:1-ratio isolation transformers. An ADSL line driver is a high-current differential output amplifier used at the customer-premises side of a broadband access interface. It sits between the codec or transceiver and the line-transformer network, providing sufficient current and voltage swing to drive a copper pair through the transformer while limiting bandwidth and noise that could disturb downstream channels. In the electronics hierarchy, the THS6043CD is a high-speed interface IC and line-driver circuit rather than a general-purpose precision amplifier. The THS6043CD supports 120 MHz device bandwidth and provides differential output swing above 40 Vpp into a 200-ohm load with ±12 V supplies. Its noninverting current-noise density is approximately 2.1 pA/√Hz, helping limit broadband noise coupled through the hybrid into the downstream channel. A 43-Vpp differential output swing is identified for the THS6043 family at a 200-ohm load, giving the line driver useful headroom for transformer and copper-pair interfaces. A dedicated shutdown function reduces quiescent current to approximately 300 µA per channel when the circuit is inactive. This low-power behavior is useful in CPE equipment that must reduce consumption between active communication periods. The dual-channel organization also allows one device to serve both directions of a line interface, reducing component count and helping keep transformer-driver routing symmetrical. The THS6043CD is suitable for full-rate ADSL and G.Lite line cards, splitter or filter modules, central-office line-interface equipment, and test equipment that emulates subscriber-line conditions. Its 14-pin SOIC format supports conventional PCB assembly, while the high output-current capability is the defining consideration when selecting a line driver for transformer-coupled DSL interfaces. Designers should verify external transformer ratios, load impedance, supply sequencing, and total channel dissipation before layout. Keep output-current paths short, provide adequate input and output bypassing, and confirm that the selected SOIC copper area limits junction-temperature rise. The shutdown pins should be controlled only after the downstream interface is in a safe state. This product page combines the THS6043CD electrical identity, verified package information, drop-in alternatives, interface applications, and practical implementation guidance to support faster component selection and PCB design.

詢價 聯絡我們
THS6043ID - 350mA ±12V ADSL CPE Line Driver | TI
THS6043ID

THS6043ID - 350mA ±12V ADSL CPE Line Driver | TI

Texas Instruments THS6043ID is a high-speed dual operational amplifier configured as a 350 mA ADSL CPE and PLC line driver with shutdown, housed in a 14-pin SOIC package. The device operates from ±12 V rails, supports full-rate ADSL and G.Lite applications, and is compatible with a 1:1 transformer ratio. According to the manufacturer product information, the THS6043 can operate from ±12 V while drawing 8.2 mA of supply current per channel. An operational amplifier is an amplifier IC whose high open-loop gain and feedback configuration amplify voltage differences between its inputs. The THS6043 belongs to the operational-amplifier hierarchy and is specialized as a high-speed line driver within the broader amplifier IC category. In ADSL and power-line communication equipment, a line driver strengthens signals before they pass through a transformer coupling network and onto a copper line. The most prominent characteristics are its 350 mA output-drive capability, ±12 V dual-supply operation, integrated shutdown function, and suitability for full-rate ADSL and G.Lite service. A stated distortion figure of 79 dBc is reported when driving a 100 Ω load at 2 V peak-to-peak. Its low noninverting current noise of 2.1 pA/√Hz is intended to reduce noise feedback through the hybrid into the downstream communication channel. The THS6043 uses a high-speed operational-amplifier core with current-capable outputs suited to transformer-coupled line interfaces. Its dual-channel arrangement allows one package to serve the transmit path of an ADSL or PLC CPE design. Because the driver dissipates power as voltage and current are applied to the line load, adequate supply-decoupling layout and thermal planning remain important even though the quoted 8.2 mA supply current per channel is much lower than the 350 mA output-current capability. Typical applications include ADSL customer-premises equipment, G.Lite-compatible access terminals, PLC line interfaces, remote-terminal transmit drivers, and central-office line-driving stages. The 14-pin SOIC package is suitable for conventional surface-mount assembly and copper-based thermal spreading, subject to the manufacturer's layout and maximum electrical ratings. Designers should verify the exact pin configuration, recommended external network, transformer ratio, allowable output swing, and shutdown logic in the manufacturer datasheet before layout release. Particular care is required when driving low-impedance lines because excessive output current, voltage overshoot, or incorrect transformer coupling can violate device ratings even when nominal ADSL operation is maintained. This page consolidates verified manufacturer and distributor information, distinguishes available evidence from unverified parameters, and provides application guidance, comparison limitations, and drop-in-replacement criteria that are not presented as a substitute for the original THS6043 datasheet.

詢價 聯絡我們
THS6052CD - 175mA ±12V ADSL CPE Line Driver | TI
THS6052CD

THS6052CD - 175mA ±12V ADSL CPE Line Driver | TI

The Texas Instruments THS6052CD is a 175 mA, ±12 V ADSL CPE and PLC line driver integrated circuit in an 8-SOIC package. It is designed for full-rate ADSL and G.Lite applications, with a noninverting current-noise density of 2.7 pA/√Hz and a wide supply-voltage range suitable for dual-polarity line-driver circuits. The device provides two driver outputs, supports operation from a 1:1 transformer ratio, and is intended for customer-premises equipment, splitters, and other high-current telephone-line interface applications. An ADSL line driver is a specialized interface amplifier that converts a low-level transmit signal into the voltage and current levels required by a copper telephone line. The THS6052CD belongs to the interface-IC and line-driver hierarchy, combining signal conditioning with the drive capability needed to overcome line attenuation and transformer losses. Its ±12 V operating capability also makes it suitable for bipolar line interfaces where a single positive supply would not provide adequate output swing. The main feature of the THS6052CD is its combination of high output current, low current noise, and a wide supply range. The 175 mA output-current capability provides margin for driving the line through transformer windings and termination networks. The 2.7 pA/√Hz noninverting current-noise specification helps preserve signal integrity when the driver is used in sensitive transmit paths. A wide operating supply range supports both conventional ADSL equipment and power-line-related line-driver circuits. The THS6052CD uses an 8-SOIC package, which is a surface-mount package in the SOIC family. The device is specified for 0 to 70 °C operation in the distributor data supplied for the THS6052CD. Its architecture is intended for high-current line driving rather than general-purpose low-power signal conditioning, so the external transformer, termination, protection, and biasing network must be designed around the specified output-current and supply-voltage limits. Typical applications include ADSL customer-premises equipment, G.Lite modems, DSL line-interface networks, telephone-line splitters, and PLC-style line-driver interfaces. In these systems, the THS6052CD is placed between the upstream transmit signal path and the line transformer, with local feedback used to establish the required drive level and bandwidth. The device can reduce the number of external drive components when its current capability and noise performance match the transformer and network requirements. Designers should pay particular attention to supply bypassing, transformer selection, output-current margin, and protection against transient events on the telephone line. The SOIC package also requires careful thermal assessment when operating continuously near the 175 mA output-current capability. The available verified information does not provide a complete pinout table, detailed timing characteristics, or a complete set of quantitative electrical limits, so those values are identified in the specification fields as data needed for final design sign-off. This page combines the verified Texas Instruments product identity, distributor package and pricing information, relevant source links, and engineering-oriented selection guidance. It is intended to help engineers identify whether the THS6052CD matches the required ADSL line-driver application before downloading the official manufacturer datasheet and completing detailed circuit validation.

詢價 聯絡我們
THS6053CD - 175mA ADSL Line Driver | Texas Instruments
THS6053CD

THS6053CD - 175mA ADSL Line Driver | Texas Instruments

Texas Instruments THS6053CD is a high-speed current-output driver integrated circuit designed for full-rate ADSL and G.Lite customer-premises equipment, power-line communication networks, and other line-driver applications. The device provides 175 mA peak output current, supports operation from dual positive and negative 12 V supplies, and includes a shutdown function. It is packaged in a 14-pin SOIC. An ADSL CPE line driver is a specialized interface-circuit component that converts upstream transmitter signals into high-current, low-distortion drive signals suitable for telephone or power lines. This device belongs to the current-output line-driver class, which sits below high-speed operational amplifiers and above the wider category of interface ICs. Its dual-polarity supply architecture enables symmetrical signal swing around ground, making it suitable for balanced communication links and transformer-coupled line interfaces. The THS6053 offers low noninverting current noise of 2.7 pA/sqrt Hz, helping reduce feedback from the line-driver output into the downstream receive channel. It is intended for full-rate ADSL and G.Lite systems and is compatible with a 1:1 transformer ratio. A shutdown function allows the circuit to enter a controlled low-power state when line-driver operation is not required, making the device useful in continuously powered telecom and networking equipment. The dual current-output architecture is intended to drive external circuitry rather than directly driving a conventional voltage-output load. Because current-mode outputs can exhibit high compliance-voltage requirements, the external network, transformer, and supply headroom must be checked carefully. Noise and distortion performance also depend on the complete signal path, including the external resistor and transformer network, supply bypassing, and PCB grounding. The THS6053CD should therefore be treated as a complete line-interface subcircuit rather than as a general-purpose logic driver. Typical uses include ADSL CPE line interfaces, G.Lite modems, power-line communication equipment, balanced telephone-line transmitters, and other high-speed communications systems requiring bipolar current drive. Its 14-pin SOIC package is suitable for conventional surface-mount assembly and allows routing on both sides of a two-layer PCB. Designers should place input, supply, and output-network components close to the device, use low-inductance bypass capacitors on each supply rail, and maintain a quiet ground return. Verify external resistor values, current compliance, transformer ratio, bandwidth, and thermal conditions before production release. The SOIC package also limits heat dissipation compared with exposed-pad or power packages, making copper area and airflow relevant at sustained maximum output current. This page organizes the confirmed THS6053CD characteristics, sourcing information, application guidance, and verified-source links. Detailed electrical limits, pin assignments, and lifecycle declarations should be checked against the current Texas Instruments product page and manufacturer datasheet before schematic or BOM approval.

詢價 聯絡我們
THS6053ID - 175mA Dual ADSL Line Driver | Texas Instruments
THS6053ID

THS6053ID - 175mA Dual ADSL Line Driver | Texas Instruments

The Texas Instruments THS6053ID is a dual high-speed DSL line driver designed for ADSL customer-premises-equipment and power-line communications. It provides two output channels, each capable of sourcing 175 mA, and operates from a 5 V to 15 V supply in a 14-pin SOIC package. The device is intended for dual ±12 V operation, with 5.2 mA of supply current per channel and a shutdown function for reducing power consumption when the line driver is not needed. A DSL line driver is an interface integrated circuit that converts a low-voltage logic signal into a high-current, low-voltage differential signal suitable for transmission over a twisted pair. Within the signal-chain hierarchy, the THS6053ID is a line driver within the broader category of interface ICs, bridging digital logic and telephone-line or power-line networks. Its 175 mA output capability provides the current needed to drive a 1:1 ratio isolation transformer and a line termination network. The THS6053ID supports both full-rate ADSL and G.Lite applications. A documented current-noise density of 2.7 pA/√Hz is particularly useful in this environment because it limits the broadband noise coupled into the hybrid and the downstream channel. Wide supply-voltage tolerance permits operation from single-ended rails or from split ±12 V supplies, while the shutdown input supports power-management strategies in multichannel CPE equipment. The device provides two line drivers and no receivers. Its key design consideration is that the line-driver outputs must remain compatible with the external transformer, termination, protection, and filtering network. Output-current headroom and thermal dissipation should be checked against the selected transformer and cable length rather than inferred only from the nominal 175 mA rating. Typical uses include ADSL CPE line interfaces, PLC modems, splitter and filter assemblies, and other high-speed DSL or line-driver subsystems. This page also consolidates verified pricing, same-package alternatives, pin and application guidance, and comparison information that is not presented together in a single manufacturer document.

詢價 聯絡我們
THS6062CD - 100 MHz Low-Noise ADSL Receiver | Texas Instruments
THS6062CD

THS6062CD - 100 MHz Low-Noise ADSL Receiver | Texas Instruments

Texas Instruments THS6062CD is a low-noise, high-speed dual differential receiver designed for ADSL data-communication systems. Its headline specifications are 1.6 nV/√Hz input-voltage noise density, 100 MHz small-signal bandwidth, and a 100 V/µs slew rate. The device is packaged in an 8-pin SOIC and contains two voltage-feedback receiver channels optimized for low-noise, high-speed differential signal handling. A differential receiver is an amplifier that responds to the voltage difference between two input terminals rather than to either input independently. This differential architecture is part of the operational-amplifier hierarchy and is widely used in communications interfaces, analog-to-digital converter drivers, line receivers, and signal-conditioning systems. By rejecting common-mode signals, a differential receiver can preserve small information-bearing signals in noisy environments. The THS6062 is positioned specifically for ADSL receiver front ends, where low noise and wide bandwidth are important because the received signal must retain both signal amplitude and timing information. The THS6062 combines 1.6 nV/√Hz voltage-noise density with a gain bandwidth of 100 MHz. Its typical slew rate is 100 V/µs, and the manufacturer identifies the device as stable for gains of 2 or greater, including inverted operation at gain -1. A typical output-drive current of 90 mA supports demanding line-receiver applications. Its low distortion figures include THD of -72 dBc at 1 MHz and -90 dBc at 1 MHz under the cited operating conditions. The device accepts a wide range of supply voltages, including single 5 V operation and dual ±5 V operation; ±15 V is also identified as a typical operating configuration. Its dual-channel arrangement allows one package to service two differential receiver paths. The combination of differential input handling, high bandwidth, low voltage noise, and high slew rate makes the THS6062 suitable for ADSL line-interface circuitry and other wideband applications requiring accurate signal amplification. Typical uses include ADSL customer-premises equipment, differential ADC input stages, communications transceivers, video and instrumentation front ends, and balanced line receivers. In these systems, the THS6062 can sit between a transformer or balanced line and the codec, ADC, or subsequent signal-processing block. The wide bandwidth supports high-data-rate signals, while the 1.6 nV/√Hz noise density helps preserve low-amplitude information. Designers should preserve the receiver’s low-noise behavior by keeping input and feedback traces short, providing clean ground references, and avoiding unnecessary parasitic capacitance around the pins. The manufacturer’s pin description and typical application circuits should be followed for supply decoupling and gain-setting resistors. The 8-pin SOIC footprint also supports conventional surface-mount assembly, although exposed-pad thermal guidance is not applicable to this package. This page combines manufacturer specifications, verified cross-reference candidates, same-package comparisons, and application-focused design guidance. These resources make it easier to evaluate the THS6062CD for ADSL, communications, instrumentation, and other high-speed differential receiver designs before committing it to a PCB layout.

詢價 聯絡我們
THS6062ID - 100MHz Dual Differential Receiver | Texas Instruments
THS6062ID

THS6062ID - 100MHz Dual Differential Receiver | Texas Instruments

The Texas Instruments THS6062ID is a dual differential receiver designed for ADSL data communication systems, combining 100 MHz voltage-feedback bandwidth, a 100 V/us slew rate, and low 1.6 nV/sqrt(Hz) voltage noise in an 8-pin SOIC package. The device contains two high-speed amplifier channels and is designed for stable operation at gains of 2 or greater. A differential receiver is an interface-circuit block that extracts the difference between two input signals while rejecting common-mode voltage and noise. This function is important in communication systems where the wanted signal is small, transmission losses are significant, and unwanted voltage can be shared by both input lines. The THS6062 belongs to the high-speed voltage-feedback amplifier family and is used in interface IC, line-driver, receiver, and signal-conditioning applications. Key characteristics include a 100 MHz -3 dB bandwidth, a typical 100 V/us slew rate, a typical 1.6 nV/sqrt(Hz) input-voltage noise density, and a typical 90 mA output drive. The receiver supports 5 V single-supply operation and dual supplies from -5 V to -15 V, giving designers flexibility for legacy telecom, ADSL, codec, and line-interface equipment. According to the Texas Instruments THS6062 product page, the circuit is stable at gains of 2 (-1) or greater. The low-noise, high-speed architecture is useful where signal fidelity must be preserved across a broad bandwidth. The 100 MHz bandwidth supports high-data-rate communication paths, while the 100 V/us slew rate allows large-amplitude signals to be reproduced with limited slew-related distortion. The listed distortion figures include THD of -72 dBc at 1 MHz and -90 dBc at 1 MHz under the stated measurement conditions. Typical applications include ADSL line-interface circuits, ADSL codec front ends, differential data receivers, communication equipment, and general high-speed signal-conditioning stages. The dual-channel configuration can process two related differential signals or be used in separate receiver channels when appropriate. Because this is a high-speed device, PCB layout, decoupling, return paths, input impedance, and output-load stability require careful attention. When laying out a THS6062ID circuit, keep input and output traces short, provide local supply bypassing, maintain a continuous ground reference, and avoid long stubs or parasitic capacitance on high-impedance nodes. Confirm the intended gain, supply configuration, input common-mode range, output load, and termination against the manufacturer datasheet before releasing production artwork. This page combines verified manufacturer and distributor information with drop-in candidate review, application guidance, and design notes.

詢價 聯絡我們
THS6072CD - Low-Power ADSL Differential Receiver, 175 MHz | Texas Instruments
THS6072CD

THS6072CD - Low-Power ADSL Differential Receiver, 175 MHz | Texas Instruments

The Texas Instruments THS6072CD is a low-power ADSL differential receiver with two channels of high-speed receive amplification, 3.4 mA of quiescent current per channel, 10 nV/√Hz of input voltage noise, and a 175 MHz -3 dB bandwidth, all housed in an 8-pin SOIC (D) package. It targets central-office and remote-terminal ADSL line-card equipment where power budget and signal fidelity both matter. A differential receiver is an interface IC that converts a small differential signal arriving over a twisted pair into a single-ended logic-level output suitable for an ADC, DSP, or codec. Within the broader hierarchy of semiconductor interfaces, the THS6072CD sits in the DSL line-receiver family: line receiver > differential receiver > interface IC > semiconductor. In an ADSL/POTS terminal it is the analog front end that recovers the modulated carrier band before digitization. Key features include the low 3.4 mA per-channel quiescent current, which the manufacturer states cuts receiver power to roughly half that of competing ADSL receivers, making the device well suited to line cards where dozens of channels share one power supply. Input voltage noise of 10 nV/√Hz keeps the receiver's contribution well below the quantization floor of the downstream codec, and total harmonic distortion of -79 dBc at 1 MHz limits intermodulation products in the recovered spectrum. The 175 MHz -3 dB bandwidth provides headroom above the ADSL downstream band. Architecturally the device is a low-noise differential input stage followed by a high-gain, high-speed output stage, with per-channel bias currents scaled so that the total supply draw stays near 6.8 mA for the dual version. Because the part is a receiver rather than a driver, it consumes no significant output drive current and can source only the CMOS-level loads expected of a following converter stage. Typical applications include ADSL central-office line cards, remote terminal units, customer-premises equipment with integrated splitters, and upstream/downstream PONS-over-ADSL style transport gear. Because it is intended for pair-terminated copper lines, common-mode rejection and noise performance matter more than wide output swing. When designing with the THS6072CD, place the input network so the differential pair sees matched impedances and identical trace lengths, and decouple the supply pins locally to keep switching-riser energy from folding into the input stage. Keep the analog path short and do not add extra gain ahead of the receiver, since that degrades the noise figure the part was designed to preserve. This page consolidates distributor availability, same-footdrop alternatives, and practical layout guidance for the THS6072CD that is not reproduced on standard distributor listings.

詢價 聯絡我們
THS6072ID - 175MHz Low-Power ADSL Receiver | TI
THS6072ID

THS6072ID - 175MHz Low-Power ADSL Receiver | TI

The Texas Instruments THS6072ID is a low-power ADSL differential receiver with 175 MHz bandwidth, 10 nV/√Hz voltage noise, and 3.4 mA per-channel quiescent current, housed in an 8-pin SOIC package. Designed for high-speed differential signal recovery, it targets central-office and remote-terminal ADSL equipment where bandwidth, low distortion, and reduced power consumption are important. An ADSL differential receiver is a voltage-feedback, high-speed analog interface circuit that converts a small differential input signal into a single-ended output suitable for processing by downstream circuitry. In the signal-chain hierarchy, it belongs to the receiver and operational-amplifier family within interface ICs, supporting the broader communications, networking, and data-processing systems used to transport high-frequency digital information over copper lines. Key characteristics include a 175 MHz -3 dB bandwidth, a 10 nV/√Hz voltage-noise density, and very low distortion of -79 dBc at 1 MHz with a 1 kΩ load. The 3.4 mA per-channel quiescent current supports low-power ADSL designs, while the wide bandwidth provides margin for high-speed data and test-and-measurement signal-chain applications. The operating temperature range is -40°C to +85°C, covering industrial-temperature applications. Technically, the THS6072 uses a voltage-feedback receiver architecture optimized for differential operation. Its low noise and low distortion make it suitable for amplifying small signals without adding excessive broadband noise or nonlinear products. Designers should still verify input common-mode range, output swing, supply voltage, gain configuration, stability, and external component requirements against the manufacturer datasheet before finalizing a production circuit. Typical applications include ADSL line-interface equipment, central-office termination electronics, remote-terminal units, high-speed communication receivers, broadband signal-conditioning modules, and instrumentation requiring a wide-band differential input stage. The 8-pin SOIC package also supports conventional PCB assembly, although high-speed layout and clean return paths remain important. The principal design consideration is signal integrity. Keep differential traces short, matched, and continuous over a common ground plane, place input and bypass components close to their pins, and control return currents. Verify that external compensation and gain settings preserve stability at the intended load and signal amplitude. This product page consolidates verified manufacturer and distributor information, supply data, technical characteristics, candidate drop-in alternatives, and practical interface-layout guidance to support faster component selection and PCB design.

詢價 聯絡我們
THS6092CD - 275mA +12V ADSL Driver | Texas Instruments
THS6092CD

THS6092CD - 275mA +12V ADSL Driver | Texas Instruments

The Texas Instruments THS6092CD is a dual high-speed operational amplifier configured as a 2/0 differential line driver for ADSL CPE and DSL applications. It supplies 275 mA of output current, operates from a single +12 V supply, and is packaged in an 8-pin SOIC. The device is intended for driving signals from a remote terminal toward the central office in asymmetrical digital subscriber line systems. An ADSL line driver is a specialized high-speed operational amplifier that delivers large current into a transformer-coupled or balanced line while maintaining low distortion and stable signal integrity. Within the power-management and signal-chain hierarchy, the THS6092 belongs to the operational-amplifier family, with applications in communications, networking, and broadband access equipment. The THS6092 family uses a +12 V supply and provides two output channels per package. According to the Texas Instruments THS6092 product page, the device is a 275 mA ADSL CPE and DSL line driver. Comparison information for the THS6092 identifies a supply current of 7.3 mA per channel and total harmonic distortion of -72 dBc while driving a 25-ohm load at 2 V peak-to-peak. These characteristics make the device appropriate for high-speed line-driving stages that require useful output swing, low distortion, and controlled supply consumption. The dual-channel architecture reduces the component count in broadband equipment by combining two line-driver channels in one package. Its 8-pin SOIC format supports conventional surface-mount assembly and simplifies inspection after soldering. The SOIC package also has a smaller body than larger power packages, although exposed-pad and heat-sink requirements must still be evaluated from the manufacturer's application guidance when operating continuously near the 275 mA output-current capability. Typical uses include ADSL customer-premises equipment, DSL line-interface cards, asymmetric digital subscriber line modems, and remote-terminal transmission stages. The same dual-channel topology can also serve other balanced, high-speed line interfaces when the signal amplitude, load, distortion, bandwidth, and supply requirements remain within the device's operating limits. Design the output return path and line interface carefully because the 275 mA output-current capability creates a meaningful load on the power supply and output network. Check transformer or termination-network behavior across the intended signal bandwidth, and use the manufacturer's recommended decoupling and layout practices to limit distortion and maintain high-frequency stability. This product page combines the exact manufacturer and distributor findings for the THS6092CD with package, application, sourcing, and drop-in comparison guidance. It also distinguishes electrically equivalent ordering options from genuine cross-package replacements so engineers can identify which components require a PCB redesign.

詢價 聯絡我們
THS6092ID - 275mA +12V ADSL CPE Line Driver | Texas Instruments
THS6092ID

THS6092ID - 275mA +12V ADSL CPE Line Driver | Texas Instruments

The Texas Instruments THS6092ID is a 275 mA, +12 V ADSL CPE and DSL line driver packaged in an 8-pin SOIC (D). It provides a high-speed dual-channel output stage for driving signals between the remote terminal and the central office, with a specified low total harmonic distortion of -72 dBc into a 25 Ω load at 2 Vpp. The device is intended for asymmetrical digital subscriber line equipment and other high-speed line-driver applications. An ADSL line driver is an interface IC that converts upstream and downstream data signals into high-amplitude voltage waveforms suitable for transmission over twisted-pair telephone lines. Within the broader signal-chain hierarchy, the THS6092 belongs to the line-driver and transceiver class of interface ICs, which connects digital data-processing equipment to physical communication media. Its dual-channel architecture supports two independently driven line outputs while simplifying the analog output stage of a customer-premises equipment design. Key features include operation from a single +12 V supply, supply current of 7.3 mA per channel, and 275 mA output-current capability. The device can produce an output swing of 18.4 Vpp, while its -72 dBc distortion at 2 Vpp into a 25 Ω load provides a meaningful margin for reducing nonlinear harmonics. The industrial temperature option covers -40 °C to +85 °C, supporting telecommunications equipment expected to operate across extended environmental conditions. Technically, the THS6092 combines high-speed amplification with a high-current output stage suitable for driving capacitive and resistive line loads. The 275 mA rating identifies the output-current capability rather than the 7.3 mA quiescent supply consumption, so engineers should evaluate both values separately. Its specified distortion behavior is especially relevant where signal fidelity must remain controlled through a long copper pair and an external transformer or protection network. Typical applications include ADSL customer-premises equipment, DSL line-interface cards, central-office line-driver modules, and other telecommunications equipment requiring high-voltage, high-current outputs. The integrated dual-driver arrangement reduces the number of separate output stages while supporting the voltage and current levels expected in line-driving circuits. A critical design consideration is the distinction between the THS6092 and THS6093 versions. Confirm the required channel polarity and control configuration against the exact data sheet before substitution. Also account for transformer turns ratio, line impedance, protection components, output waveform limits, and thermal dissipation when defining the external drive network. This page consolidates manufacturer specifications, package details, lifecycle-oriented ordering information, verified source links, and same-family replacement guidance. It also highlights the engineering parameters that should be checked before treating another THS6092-family device as a drop-in choice.

詢價 聯絡我們
THS6093CD - 275mA +12V ADSL Line Driver | Texas Instruments
THS6093CD

THS6093CD - 275mA +12V ADSL Line Driver | Texas Instruments

The Texas Instruments THS6093CD is a 275 mA, +12 V ADSL CPE and PLC line driver with shutdown, packaged in a 14-pin SOIC. It is designed for high-speed line-driving applications using either a 1:2 transformer ratio or single-supply operation. Its headline characteristics are 275 mA output current, +12 V supply operation, a 14-SOIC package, low 2.1 pA/√Hz noninverting current noise, and a shutdown function. An ADSL line driver is an interface integrated circuit that converts upstream data signals into suitable current and voltage levels for transmission over copper lines. It belongs to the interface IC hierarchy within integrated circuits and semiconductor signal-conditioning devices. The THS6093 is intended for full-rate ADSL and G.Lite equipment, including customer-premises equipment and power-line communication equipment where the line interface must combine high output current with controlled noise. Key features include compatibility with a 1:2 transformer ratio, a wide supply-voltage range, and suitability for single +12 V operation. The 275 mA output capability provides useful drive current for line termination and transformer coupling. The device also includes shutdown control, allowing a system to disable the driver when line transmission is not required. Low noninverting current noise of 2.1 pA/√Hz helps reduce noise coupled through a telephone hybrid into the downstream receiver path. The THS6093 uses a high-current output stage suited to the demanding load presented by an ADSL line interface. Its architecture supports both transformer-coupled and single-supply arrangements, giving designers flexibility in line-network topology. The 14-pin SOIC package is a conventional surface-mount format suitable for automated PCB assembly, although the high-current output path requires careful routing, thermal review, and adequate copper around the power and ground pins. Typical uses include ADSL CPE line interfaces, full-rate ADSL modems, G.Lite access equipment, PLC gateways, and communications terminals connected to copper lines. It is particularly relevant when the design needs a dedicated line driver with a shutdown control and operation from a +12 V supply rather than a general-purpose low-power amplifier. For PCB implementation, place the device close to the line-transformancer or network interface and keep the high-current output path compact. Use a low-inductance supply connection and adequate input and output bypassing according to the manufacturer application guidance. Verify maximum output current, voltage, and thermal conditions across temperature because 275 mA describes the line-driver capability rather than unlimited continuous load capacity. This product record combines the manufacturer identification, package information, current capability, major ADSL and PLC use cases, and practical implementation considerations. It also provides sourcing guidance for the exact THS6093CD ordering code and distinguishes confirmed specifications from parameters that still require confirmation from the manufacturer datasheet.

詢價 聯絡我們
THS6093ID - 275mA +12V ADSL Line Driver | Texas Instruments
THS6093ID

THS6093ID - 275mA +12V ADSL Line Driver | Texas Instruments

Texas Instruments THS6093ID is a dual-channel, high-speed ADSL CPE line driver rated for 275 mA output current and +12 V operation in a 14-pin SOIC package. The device is intended for driving signals from the remote terminal toward the central office in asymmetric digital subscriber line systems, including full-rate ADSL and G.Lite configurations. An ADSL line driver is a specialized interface-circuit component that converts upstream driver signals into robust, high-current line outputs suitable for copper telephone networks. It sits within the power-management and signal-conditioning hierarchy of a customer premises equipment design, translating logic-level commands into line-side waveforms while helping preserve signal integrity across the transformer-coupled network. Key features include a wide supply-voltage range, suitability for single +12 V operation, compatibility with a 1:2 transformer ratio, and low 2.1 pA/√Hz noninverting current noise. The THS6093 also provides low total harmonic distortion of -72 dBc while driving the line and includes shutdown control. Each channel draws only 7.3 mA of supply current, helping limit the power burden of a multi-output access circuit. The device uses two noninverting outputs in a 14-pin SOIC package. Its high output-current capability is important for ADSL line interfaces because the external transformer, network loading, and cable losses can require substantially more current than a conventional logic driver. The specified 275 mA rating provides the core design limit for transformer selection, copper-line loading, supply capability, and thermal analysis. Typical uses include full-rate ADSL customer premises equipment, G.Lite ADSL line interfaces, and power-line carrier line-driver circuits. In each application, the THS6093 can operate from a single +12 V rail and drive the line through an appropriate external transformer while the shutdown function provides a controlled path for reducing activity when the endpoint is inactive. The primary design consideration is ensuring that the +12 V supply, output-current demand, transformer ratio, load, thermal conditions, and signal-integrity expectations all agree. Use the manufacturer datasheet pin-description table when assigning PCB nets, and confirm that the selected transformer supports the specified 1:2 ratio and operating bandwidth.

詢價 聯絡我們
THS6182D - Low-Power ADSL/PLC Differential Driver | TI
THS6182D

THS6182D - Low-Power ADSL/PLC Differential Driver | TI

The Texas Instruments THS6182D is a low-power current-feedback differential line driver designed for full-rate ADSL and power-line communication systems. It delivers a 44 Vpp differential output swing, operates from dual supply rails, and is offered in a 16-pin SOIC package. The device includes selectable full, mid, low, and shutdown bias modes to balance output drive against power consumption. A line driver is an analog output interface that converts upstream signal information into a high-voltage differential signal capable of traversing copper, telephone, or other communications lines. The THS6182 belongs to the current-feedback operational-amplifier family and is positioned between a communications signal source and the physical line. Its differential architecture reduces susceptibility to common-mode noise while providing the voltage swing and current-drive capability needed by xDSL line cards. Key features include 11 mA per channel in full-bias mode, 7.5 mA per channel in mid-bias mode, 4 mA per channel in low-bias mode, and 0.25 mA per channel in shutdown mode. The manufacturer identifies low distortion, low inverting current noise, and stable operation at low channel current as important benefits for receiver sensitivity and central-office line-card density. An IADJ pin also provides user-controlled bias current for system-level optimization. According to the manufacturer product page, the THS6182 is pin compatible with EL1503C and EL1508C line-driver families and is available in multiple packages and power-control modes. Its current-feedback differential architecture is intended to preserve signal integrity while minimizing dissipation, making it particularly relevant to high-density ADSL central-office equipment and PLC systems. The advertised 3.2 nV/√Hz inverting current noise supports receiver-sensitive signal paths. Typical deployments include full-rate ADSL central-office line cards, DSL access multiplexor equipment, remote terminal equipment, and PLC transmitters. In these systems, the driver accepts an upstream differential signal and produces a substantially larger differential output across the line interface. Designers must preserve the intended differential topology, provide suitable bypass capacitance, terminate unused inputs correctly, and verify thermal performance across the required line swing and channel-current range. A key design consideration is power mode selection. Full-bias mode provides maximum drive when required, while mid- and low-bias modes reduce dissipation when channel current and reach requirements permit. The shutdown state provides the lowest listed current, but enabling and disabling channels must be coordinated with the communication protocol to avoid invalid transmitted states. This page combines verified manufacturer and distributor information with application guidance; it does not infer unprovided electrical limits or invent replacement parts.

詢價 聯絡我們
THS6182DR - Low-Power ADSL/PLC Differential Driver | TI (Tape & Reel)
THS6182DR

THS6182DR - Low-Power ADSL/PLC Differential Driver | TI (Tape & Reel)

The Texas Instruments THS6182DR is a low-power current-feedback differential line driver designed for full-rate ADSL and power-line communication systems. It delivers a 44 Vpp differential output swing, operates from dual supply rails, and is offered in a 16-pin SOIC package. The device includes selectable full, mid, low, and shutdown bias modes to balance output drive against power consumption. A line driver is an analog output interface that converts upstream signal information into a high-voltage differential signal capable of traversing copper, telephone, or other communications lines. The THS6182 belongs to the current-feedback operational-amplifier family and is positioned between a communications signal source and the physical line. Its differential architecture reduces susceptibility to common-mode noise while providing the voltage swing and current-drive capability needed by xDSL line cards. Key features include 11 mA per channel in full-bias mode, 7.5 mA per channel in mid-bias mode, 4 mA per channel in low-bias mode, and 0.25 mA per channel in shutdown mode. The manufacturer identifies low distortion, low inverting current noise, and stable operation at low channel current as important benefits for receiver sensitivity and central-office line-card density. An IADJ pin also provides user-controlled bias current for system-level optimization. According to the manufacturer product page, the THS6182 is pin compatible with EL1503C and EL1508C line-driver families and is available in multiple packages and power-control modes. Its current-feedback differential architecture is intended to preserve signal integrity while minimizing dissipation, making it particularly relevant to high-density ADSL central-office equipment and PLC systems. The advertised 3.2 nV/√Hz inverting current noise supports receiver-sensitive signal paths. Typical deployments include full-rate ADSL central-office line cards, DSL access multiplexor equipment, remote terminal equipment, and PLC transmitters. In these systems, the driver accepts an upstream differential signal and produces a substantially larger differential output across the line interface. Designers must preserve the intended differential topology, provide suitable bypass capacitance, terminate unused inputs correctly, and verify thermal performance across the required line swing and channel-current range. A key design consideration is power mode selection. Full-bias mode provides maximum drive when required, while mid- and low-bias modes reduce dissipation when channel current and reach requirements permit. The shutdown state provides the lowest listed current, but enabling and disabling channels must be coordinated with the communication protocol to avoid invalid transmitted states. This page combines verified manufacturer and distributor information with application guidance; it does not infer unprovided electrical limits or invent replacement parts.

詢價 聯絡我們
THS6182DW - Low-Power ADSL/PLC Line Driver | Texas Instruments
THS6182DW

THS6182DW - Low-Power ADSL/PLC Line Driver | Texas Instruments

The Texas Instruments THS6182DW is a low-power differential line driver designed for full-rate ADSL and power-line communication systems, with a 20-pin SOIC package. It uses current-feedback architecture, provides selectable operating-current modes, and supports an adjustable bias-current input. The device is specified for 1/0 DSL line-driving duties over a temperature range of -40°C to +85°C. An ADSL line driver is a specialized interface-circuit component that converts upstream data into a high-current differential signal suitable for transmission over copper telephone lines. This device belongs to the interface IC hierarchy: line driver → differential transceiver → communications interface → semiconductor. Unlike a general-purpose voltage-output amplifier, a current-feedback line driver combines high-frequency signal capability with output-current control designed specifically for line networks. Key operating features include 11 mA per channel in full-bias mode, 7.5 mA per channel in mid-bias mode, 4 mA per channel in low-bias mode, and 0.25 mA per channel in shutdown mode. The manufacturer also identifies operation down to 1.8 mA per channel, an adjustable-current input, and a low-noise result of 3.2 nV/√Hz inverting current noise. These selectable modes allow designers to balance transmission performance against power dissipation. The current-feedback differential architecture supports full-rate ADSL applications while maintaining high linearity without the complexity and power burden of conventional designs. The adjustable bias input lets the circuit user control the operating-current condition, making it useful in designs where line length, transformer characteristics, aggregate line load, or central-office power density affect the preferred drive level. The THS6182 is also identified as pin-compatible with the EL1503C and EL1508C. Typical uses include ADSL central-office line-card equipment, DSL access concentrators, splitters, remote-terminal and line-unit equipment, and PLC interface circuits. The device is particularly relevant where multiple line channels share a constrained power budget, because its low-bias and shutdown modes reduce dissipation when channel activity is low or a port must be disabled. The primary design trade-off is current setting versus signal performance and power consumption. Select full-bias operation for maximum line drive, lower modes for reduced dissipation, and shutdown when the port is inactive. Place the device and its associated line-network components carefully because long high-current transmission paths can introduce impedance discontinuities and signal-integrity problems that are not corrected by changing bias mode. This product page combines the manufacturer’s functional description, operating-mode data, package information, interface use cases, and replacement guidance with practical selection notes. It also highlights the distinction between electrically equivalent order codes and genuinely pin-compatible drop-in choices, helping engineers assess whether a redesign or package-level substitution is actually required.

詢價 聯絡我們
THS6212YS - Broadband PLC Line Driver | Texas Instruments
THS6212YS

THS6212YS - Broadband PLC Line Driver | Texas Instruments

Texas Instruments THS6212YS is a high-speed, differential broadband PLC/HPLC line-driver amplifier based on current-feedback architecture, with support for line power up to 14.5 dBm at frequencies through 30 MHz. The device is supplied in a 17-terminal, rectangular, no-lead die package. Its differential output topology is intended for power-line communication systems that require broadband signal transmission through challenging in-home or outdoor network wiring. A broadband PLC line driver is an interface amplifier that generates a differential signal for transmission over power-line communication wiring. The THS6212 belongs to the line-driver and receiver hierarchy of interface ICs, where its current-feedback amplifier architecture provides the active gain stage needed to drive external circuitry and realize a physical-layer transmitter signal. This makes it relevant to broadband PLC modems, HPLC endpoints, carrier communication equipment, and line-coupling networks. The manufacturer identifies current-feedback architecture, differential operation, transmission capability through 30 MHz, and line power up to 14.5 dBm as the principal characteristics of the THS6212. Differential drive helps reject common-mode disturbances picked up from the shared power-line environment. The broad operating bandwidth supports both low-frequency carrier data and substantially higher-frequency communication signals, while the 28 V maximum supply rating provides headroom for an industrial interface stage. The target is identified as an industrial-temperature device operating from -40 °C to +85 °C. Its 17-terminal no-lead package is intended for surface-mount assembly. Because this ordering code is associated with a die rather than a conventional leaded or molded IC package, PCB land-pattern design, exposed-pad treatment, assembly profile, and reflow requirements must be confirmed against the official package drawing before layout release. Typical uses include broadband PLC transmitters, HPLC communication endpoints, carrier-current networking equipment, and line-driver stages for communications over existing electrical infrastructure. In a transmitter implementation, the amplifier output is connected through the appropriate line-coupling and filtering network. Component values and protection requirements depend on the transformer, line impedance, conducted-emissions target, and safety arrangement of the complete communication equipment. Design should preserve the high-speed current-feedback path with short traces, carefully controlled return current, and decoupling placed close to the supply pins. Output isolation, impedance matching, and surge protection must be evaluated together because a line driver also sees the external network's distributed and transient behavior. The amplifier rating does not remove the need for application-level isolation and protection. This page consolidates the manufacturer's device description, electrical and environmental limits, sourcing structure, and engineering guidance. It also distinguishes verified device facts from parameters that require the official datasheet or package drawing, helping designers establish whether the THS6212YS fits a broadband PLC signal chain before committing the layout.

詢價 聯絡我們
THS7314D - 3-Channel SDTV Video Amplifier | Texas Instruments
THS7314D

THS7314D - 3-Channel SDTV Video Amplifier | Texas Instruments

The Texas Instruments THS7314D is a 3-channel SDTV video amplifier with integrated fifth-order filters and 6 dB gain, supplied in an 8-pin SOIC package. It operates from a single 3 V to 5 V supply and combines three video channels in one package. According to the Texas Instruments product and data-sheet information, the device uses the Silicon-Germanium BiCom-III process and consumes 16 mA total quiescent current at 3.3 V. A video amplifier is an analog signal-chain component that conditions composite or component video signals between a source, processing stage, and display. It belongs to the amplifier hierarchy, specifically the video-amplifier and video-buffer category. Unlike a passive termination network, an integrated video amplifier can provide filtering, gain, impedance matching, and output-drive capability while reducing the number of discrete components required on a video board. The THS7314D provides three buffered channels, 6 dB gain, and fifth-order filtering in one 8-pin SOIC. Its rail-to-rail output stage supports both AC and DC line-driving requirements. The manufacturer specifically identifies driving two lines or 75-ohm loads as supported use cases, making the device relevant to SDTV routing, video distribution, and display-adapter designs. The integrated filter function is especially useful when system designers want repeatable channel filtering without external filter networks. Its low-power operation distinguishes the part from higher-current video drivers. Texas Instruments states that the total 16 mA quiescent current at a 3.3 V supply makes the THS7314 suitable for USB-powered, portable, and other power-sensitive video applications. The single-supply 3 V to 5 V operating range also allows the same architecture to operate from nominal 3.3 V and 5 V system rails, although the complete design must satisfy the limits in the manufacturer data sheet for each voltage and temperature condition. Typical applications include SDTV output buffering, video splitters and distribution boards, portable media equipment, video capture equipment, and display interfaces. In each case, the three-channel structure reduces routing complexity while the fifth-order filters and 6 dB gain support controlled signal transmission into downstream analog video stages. The 75-ohm drive capability is useful when the output must connect through conventional video cabling to a terminated load. Designers should verify the complete pin configuration, decoupling requirements, input and output impedance, bandwidth, channel-to-channel behavior, and recommended termination network against the official data sheet. Video-layout practices should also be considered, including short trace routing, careful grounding, separation between analog video paths and noisy switching circuitry, and appropriate filtering at external connectors. This page consolidates the verified manufacturer and distributor information for THS7314D and clearly identifies parameters for which verified values were not supplied. It also distinguishes the confirmed device characteristics from engineering information that must be obtained from the official THS7314 data sheet before layout or qualification decisions are finalized.

詢價 聯絡我們
THS7315D - 3-Channel SDTV Video Amplifier | Texas Instruments
THS7315D

THS7315D - 3-Channel SDTV Video Amplifier | Texas Instruments

Texas Instruments THS7315D is a three-channel SDTV video amplifier with integrated fifth-order filters and 5.2 V/V gain, operating from a single 3 V to 5 V supply in an 8-SOIC package. The device combines three video channels, fixed 5.2 V/V gain, and fifth-order filtering for CVBS, S-Video, YPBPR 480i/576i, YUV, and GBR/RGB signal paths. A video amplifier is an analog signal-conditioning IC that increases the amplitude of composite or component video signals while controlling bandwidth, attenuation, and unwanted spectral content. Within the broader semiconductor hierarchy, the THS7315D is a video amplifier, a type of analog amplifier, and ultimately an integrated circuit used within display, broadcast, set-top-box, and video-conversion systems. The THS7315D integrates three independent SDTV video amplifier channels and fifth-order filters into one package. Its fixed gain of 5.2 V/V is useful when a source produces a relatively small video amplitude and the downstream circuitry requires additional signal swing. The fifth-order filters provide frequency-dependent noise and interference attenuation, while the single-supply architecture simplifies power planning in 3 V and 5 V systems. Texas Instruments fabricated the device using its complementary silicon-germanium BiCom3 process. This integration reduces the number of discrete amplification and filtering stages required in a multi-channel analog video path. Because the amplifier includes filters rather than functioning only as a wideband buffer, board-level signal integrity depends on correct source and load impedances, adequate bypass capacitance, short output routing, and proper grounding. The supplied data does not provide detailed output impedance, bandwidth, settling-time, noise, or stability-versus-capacitance figures, so those characteristics must be confirmed in the manufacturer datasheet before final circuit sign-off. Typical uses include SDTV video buffering, Y/Cb/Cr component-video distribution, CVBS and S-Video processing, RGB amplification, and DAC reconstruction filtering. The integrated three-channel arrangement is particularly useful when red, green, and blue or Y, Pb, and Pr channels must receive matched amplification and filtering. It can also support protected or industrial video equipment where reducing the number of active stages simplifies signal routing and maintenance. A primary design consideration is ensuring that the source impedance, termination, and downstream load remain compatible with the integrated filter network. The manufacturer's datasheet and typical application information should be used to select input and output coupling or termination components. PCB layout should keep the device and its bypass capacitors close together, maintain short analog traces, provide an uninterrupted ground reference, and isolate sensitive video paths from switching and high-current return paths. This product page consolidates the verified manufacturer and distributor information, distinguishes documented THS7315D characteristics from missing technical data, identifies verified same-package replacements, and adds practical application and layout guidance for engineers evaluating the THS7315D in SDTV video signal chains.

詢價 聯絡我們
THS7316D - 3-Channel HDTV Video Amplifier | Texas Instruments
THS7316D

THS7316D - 3-Channel HDTV Video Amplifier | Texas Instruments

Texas Instruments THS7316D is a 3-channel HDTV video amplifier with integrated 5th-order filters and 6 dB gain, supplied in an 8-pin SOIC package. It operates from a single 3 V to 5 V supply and provides three buffered video channels for HDTV and related video-signal processing systems. The device is fabricated using the Silicon-Germanium (SiGe) BiCom-III process and is designed for low-power video applications where integrated filtering reduces external circuit complexity. A video amplifier is a specialized analog amplifier that buffers and conditions composite or component video signals while preserving usable bandwidth and signal amplitude. The THS7316 belongs to the broader video-amplifier and signal-conditioning category, integrating three amplifier channels with fixed filtering into one device. This makes it useful in set-top boxes, television equipment, video processors, projectors, displays, and other systems that distribute or convert analog video signals. The principal features of the THS7316D are its three-channel architecture, 6 dB voltage gain, 5th-order integrated filters, single-supply operation, and 43 MHz video bandwidth identified in the verified product data. The filter implementation helps remove unwanted high-frequency video components before they reach downstream circuitry. Its three-channel arrangement allows red, green, and blue video paths to be amplified consistently within one package, reducing the number of separate buffer devices required. The device uses a low-power SiGe BiCom-III process and is intended for 3 V to 5 V single-supply systems. The verified distributor description identifies the THS7316 as a 3-channel integrated video buffer, while the Texas Instruments product page identifies the 5th-order filter and 6 dB gain functions. The 8-SOIC package is compatible with conventional surface-mount assembly and is suitable for compact consumer and industrial video equipment. Typical applications include HDTV signal conditioning, RGB video distribution, video projection systems, television receivers, set-top-box video outputs, and industrial video interfaces. The integrated filtering is particularly useful where the source signal requires predictable bandwidth limiting before a display, encoder, scaler, or analog-to-digital conversion stage. The fixed 6 dB gain also provides a defined signal-conditioning function rather than requiring an external gain network for basic video buffering. Designers should verify the complete electrical limits, decoupling requirements, output loading, and filter response in the manufacturer datasheet before layout release. Pay particular attention to the single-supply input range, required bypass capacitors, and the acceptable input and output signal levels. Because the available verified data does not provide the complete pin mapping or all parameter values, the PCB footprint and analog signal path should be checked against the official THS7316 documentation rather than inferred from distributor descriptions. This page combines verified manufacturer and distributor information, source-backed technical context, and practical selection considerations for engineers evaluating the THS7316D. It also distinguishes verified attributes from parameters that remain to be confirmed in the datasheet, helping prevent assumptions about gain, bandwidth, filtering, or pin compatibility during component selection.

詢價 聯絡我們
THS7375 - 4-Channel SDTV Video Amplifier | Texas Instruments
THS7375

THS7375 - 4-Channel SDTV Video Amplifier | Texas Instruments

The THS7375 is a low-power, single-supply, 3 V to 5 V four-channel integrated video buffer from Texas Instruments, fabricated using the complementary Silicon-Germanium (SiGe) BiCom3X process. It is available in a lead-free and green (RoHS) compliant TSSOP-14 package. The device incorporates a sixth-order Butterworth filter that can be bypassed, making it useful as a digital-to-analog converter (DAC) reconstruction filter. With a rail-to-rail output stage and a fixed gain of 5.6 V/V (15 dB), the THS7375 is designed for SDTV video applications, providing excellent image quality and driving capability for both AC and DC coupled loads. A video amplifier is an electronic amplifier that processes video signals, typically providing gain, buffering, and filtering to ensure signal integrity over transmission lines. In the signal chain, the THS7375 sits between a video DAC or encoder and the output connector, performing reconstruction filtering and line driving. It belongs to the category of integrated video buffers, which are essential in consumer electronics, set-top boxes, DVD players, and video surveillance systems. The THS7375's integrated filters eliminate the need for external passive components, simplifying design and reducing board space. Key features include a 6th-order Butterworth filter with a cutoff frequency suitable for SDTV (standard-definition television) signals, a fixed gain of 5.6 V/V, and the ability to drive two lines per channel or 75-ohm loads. The device operates from a single 3 V to 5 V supply, making it compatible with common digital logic levels. The rail-to-rail output stage ensures maximum output swing, and the low power consumption makes it ideal for battery-powered or power-sensitive applications. Technically, the THS7375 uses the BiCom3X process, which combines bipolar and CMOS transistors on a silicon-germanium substrate, offering high-speed performance with low power. The integrated filter is a 6th-order Butterworth type, providing a flat passband and sharp roll-off to remove out-of-band noise and aliasing artifacts. The device also features an internal gain of 5.6 V/V, which is optimized for driving video loads with proper termination. Typical applications include video buffer and line driver for SDTV signals in set-top boxes, DVD players, video recorders, and surveillance systems. It is also suitable for driving video signals from DaVinci processors and other video encoders. The THS7375's ability to drive two lines per channel allows for flexible routing in complex video distribution systems. When designing with the THS7375, ensure proper power supply decoupling with a 0.1 uF ceramic capacitor close to the VCC pin. The input should be AC-coupled if the source has a DC offset, and the output should be terminated with 75-ohm resistors to match the characteristic impedance of the cable. The filter bypass pin can be used to disable the internal filter if external filtering is preferred.

詢價 聯絡我們
THS788PFD - 200 MHz Quad-Channel 13 ps TMU | Texas Instruments
THS788PFD

THS788PFD - 200 MHz Quad-Channel 13 ps TMU | Texas Instruments

The Texas Instruments THS788PFD is a four-channel time measurement unit (TMU) using time-to-digital converter architecture, with 8 ps single-shot accuracy, 13 ps resolution derived from an external 200 MHz controller clock, and a measurement result range of 7 s in a 100-pin HTQFP package. It supports a 200 MHz event-input rate and provides LVDS-compatible event inputs, an LVDS result interface, four event channels, and a synchronization channel. A time measurement unit is a specialized clock-and-timing semiconductor that converts the elapsed time between events into a digital result. The THS788 belongs to the TMU hierarchy, where its TDC architecture combines fine timing resolution with high-rate event capture. This makes it suitable for systems requiring precise timing rather than ordinary counting, including synchronized instrumentation, pulsed systems, test equipment, and communications or industrial timing subsystems. The key performance feature is 8 ps single-shot accuracy, supported by a 13 ps least-significant-bit resolution. The external controller clock operates at 200 MHz, and the event input rate can reach 200 MHz. The 7 s result range supports substantially longer measurement intervals than the 13 ps conversion resolution alone would imply, depending on the configured measurement sequence and system implementation. LVDS-compatible interfaces provide high-speed, noise-resistant signaling for demanding board environments. Technically, the THS788 uses a fast TDC architecture to perform time measurements across four event channels. Its inputs are designed for LVCMOS or LVDS signaling, while the result output is identified as LVDS. The synchronized architecture and dedicated sync channel make the device suitable for multi-event acquisition where repeatable timing relationships matter. The stated low temperature coefficient of 0.1 ps/°C indicates attention to timing stability over temperature. Typical applications include high-speed test and measurement systems, pulsed-signal analysis, synchronization of multiple timing events, industrial automation requiring deterministic event capture, and communications equipment that must measure narrow time intervals. The device can also support scientific instrumentation where event timing accuracy directly affects the quality of the collected result. Designers should treat the external 200 MHz clock, LVDS-compatible input routing, result interface, decoupling, and high-speed return paths as an integrated signal-integrity problem. Input timing, trace length, termination, and controller configuration must be evaluated together because the 13 ps resolution does not guarantee end-to-end system accuracy without clean clocking, controlled stimulus, and correct interface implementation. This page combines the verified manufacturer and distributor information for the THS788PFD with practical selection guidance, application analysis, pricing references, and an honest assessment of available drop-in alternatives.

詢價 聯絡我們