產品(44,000+)

STM32L151QDH6 - 32MHz Cortex-M3 384KB MCU | STMicroelectronics
STM32L151QDH6

STM32L151QDH6 - 32MHz Cortex-M3 384KB MCU | STMicroelectronics

STMicroelectronics STM32L151QDH6 is an ultra-low-power, 32-bit ARM Cortex-M3 microcontroller with a 32 MHz operating frequency, 384 KB of Flash memory, and USB connectivity in a 132-UFBGA (7x7 mm) package. The device belongs to the STM32L1 microcontroller family and is suited to compact embedded systems requiring substantial flash storage, low-power operation, and a broad set of mixed-signal peripherals. An ultra-low-power microcontroller is a semiconductor device designed to minimize energy consumption while executing control, communications, sensing, and data-processing functions. The STM32L151QDH6 combines an ARM Cortex-M3 RISC core, embedded Flash, SRAM, USB, analog conversion, digital-to-analog conversion, LCD support, memory interfaces, and communication peripherals. Within the product hierarchy, it is a 32-bit microcontroller and system-on-chip solution for battery-operated and energy-conscious embedded products. Verified device information identifies 384 KB of Flash, a 32 MHz Cortex-M3 core, a 132-UFBGA package, 3.3 V operation, and USB support. Additional verified sources list 48 KB SRAM, 12 KB EEPROM, two 12-bit converters, LCD support, ADC, DAC, and memory interfaces. These resources allow firmware, interface drivers, application logic, and control functions to be consolidated without requiring a separate external memory device in many designs. The USB capability makes this MCU useful for portable data-acquisition equipment, USB-connected sensors, configuration tools, and service interfaces. Its analog resources are useful for industrial monitoring and battery-powered instrumentation, while the large Flash footprint can accommodate connected-device firmware, protocol stacks, and local data-processing functions. The compact 7x7 mm UFBGA is appropriate for space-constrained designs but requires careful PCB layout and assembly process control. Designers should verify supply voltage limits, GPIO drive characteristics, analog-reference requirements, clock configuration, USB transceiver connections, decoupling, and exposed-ball assignments against the manufacturer datasheet before layout. Because the exact 132-ball pinout is not provided in the verified data and no canonical 132-UFBGA package illustration exists in the available package library, this page conservatively omits individual pin assignments rather than presenting unverified connection data. This page consolidates verified distributor and manufacturer information, purchase channels, technical comparisons, drop-in replacement findings, and application guidance. Its main engineering value is separating confirmed STM32L151QDH6 attributes from specifications that still require confirmation from the complete manufacturer datasheet.

詢價 聯絡我們
STM32L151R8H6 - 32MHz Cortex-M3 MCU | STMicroelectronics
STM32L151R8H6

STM32L151R8H6 - 32MHz Cortex-M3 MCU | STMicroelectronics

STMicroelectronics STM32L151R8H6 is a 32-bit ARM Cortex-M3 microcontroller with a maximum clock frequency of 32 MHz, 64 KB of Flash program memory, 10 KB of SRAM, and a 64-pin TFBGA package measuring 5 mm by 5 mm. The device operates from a 2.5 V or 3.3 V supply and belongs to the STM32L151 ultra-low-power microcontroller family. Its combination of USB connectivity, low-power operation, and a compact ball-grid-array package makes it suitable for connected embedded systems that need substantial Flash storage in a space-constrained design. An ultra-low-power microcontroller is an embedded semiconductor designed to complete measurements, control peripheral functions, and manage communications while minimizing energy consumption. The STM32L151 family combines an ARM Cortex-M3 processing core with timers, serial interfaces, USB connectivity, and low-power operating modes. Within the product hierarchy, it belongs to the Cortex-M microcontroller class, then the STM32 family, and finally the STM32L1 low-power series. The STM32L151R8H6 provides 64 KB of Flash memory organized as 64K by 8 bits, 10 KB of SRAM, and 4 KB of EEPROM according to the product listing. Its ARM Cortex-M3 core operates at up to 32 MHz, supporting responsive control-loop execution and interrupt-driven peripheral handling. USB connectivity expands the supported application set, while the 64-TFBGA package permits placement on compact, high-density boards. The STM32L151R8H6 is designed for low-power embedded control, and its internal resources allow firmware, data, and peripheral control to be consolidated into one device. The 32 MHz Cortex-M3 core provides substantially more processing capability than low-clock 8-bit designs, while the STM32L151 family's low-power features are valuable in battery-operated equipment. Its 64 KB Flash capacity is appropriate for USB-connected accessories, sensor controllers, portable instrumentation, and compact automation modules. Typical applications include USB-to-serial interface equipment, industrial sensor nodes, portable measurement instruments, low-power data loggers, and embedded control boards with limited installation space. The integrated USB capability can reduce the need for an external USB interface controller in designs where USB data and power are required. The 10 KB SRAM and 4 KB EEPROM also support protocol handling, configuration storage, and buffering in connected sensor or control products. PCB design requires careful attention to the 64-ball TFBGA layout, power-supply decoupling, clock stability, and exposed-pad or ground-ball connections specified by the manufacturer. Place bypass capacitors close to the relevant supply pins, route sensitive clock and communications signals away from high-current switching nodes, and follow the recommended land pattern and reflow profile. Firmware should also validate the device's low-power state transitions and USB enumeration behavior across the intended operating conditions. This product page consolidates core electrical characteristics, drop-in replacement options, application guidance, comparison parameters, and package-related engineering notes. It helps engineers distinguish electrically similar STM32L1 devices before committing a 64-ball footprint, validate required peripherals, and plan sourcing through the Request a Quote form on this page.

詢價 聯絡我們
STM32L151R8T6ATR - 64KB Flash Cortex-M3 MCU | STMicroelectronics
STM32L151R8T6ATR

STM32L151R8T6ATR - 64KB Flash Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32L151R8T6ATR is an ultra-low-power ARM Cortex-M3 microcontroller with 64KB Flash and 32MHz CPU, housed in a 64-pin LQFP (10x10x1.4mm) package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and programmable peripherals. Ultra-low-power MCUs target battery-operated and energy-harvesting applications by combining a low-leakage process technology with multiple low-power modes (Sleep, Low-Power Sleep, Stop with RTC, Standby) that draw microamp-level quiescent current. Within the broader taxonomy, the STM32L1 sits below application processors (Cortex-A), above simple 8-bit MCUs, and is positioned for always-on sensing, metering, and human-interface designs where months-to-years battery life matter more than raw throughput. Key specifications include 64KB Flash, 10KB SRAM (per the STM32L1 datasheet family), an internal 32kHz RTC oscillator, multiple timer/counter peripherals, I2C/SPI/USART/USB interfaces, 12-bit ADC, and a 1.8V-3.6V supply range. The device supports seven low-power modes with a typical Stop-mode current in the microamp range, enabling coin-cell powered designs. The Cortex-M3 core implements the Thumb-2 instruction set, NVIC for interrupt handling, and is supported by ST's STM32Cube ecosystem including HAL, LL drivers, and STM32CubeIDE. Peripherals include up to 83 fast GPIOs, a real-time clock with calendar, brown-out reset, and a 12-bit ADC. Typical applications include portable medical devices, industrial sensor nodes, smart meters, fitness wearables, and home automation controllers. The 64KB Flash / 10KB RAM balance targets small to mid-tier firmware stacks including BLE software stacks via external transceivers. Design with adequate decoupling (100nF + 4.7uF) on each VDD pin and keep the NRST line short with a 100nF capacitor to ground. Use the STM32CubeMX configuration tool to assign pin alternate functions and validate clock tree settings. This page synthesizes distributor pricing, lifecycle status, same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

詢價 聯絡我們
STM32L151RBH6 - 32MHz Cortex-M3 128KB MCU | STMicroelectronics
STM32L151RBH6

STM32L151RBH6 - 32MHz Cortex-M3 128KB MCU | STMicroelectronics

The STMicroelectronics STM32L151RBH6 is an ultra-low-power 32-bit microcontroller with an ARM Cortex-M3 core, 32 MHz operating frequency, 128 KB Flash memory, and a 64-TFBGA 5 x 5 mm package. It combines USB connectivity and low-power operation for compact embedded systems. An ultra-low-power microcontroller is an embedded semiconductor designed to complete control, communication, and data-acquisition tasks while minimizing energy consumption. The STM32L1 family belongs to the microcontroller hierarchy, combining an ARM Cortex-M3 processor core with Flash memory, SRAM, EEPROM, communication peripherals, analog converters, and security features. This combination makes it suitable for battery-powered, portable, industrial, and instrumented products. The STM32L151RBH6 provides 128 KB of Flash, 32 KB of SRAM, 4 KB of EEPROM, a 32 MHz Cortex-M3 core, and USB connectivity according to the manufacturer datasheet information. Its peripheral set includes LCD support, ADC, and DAC functions, allowing a compact design to combine control logic, analog measurement, waveform generation, and direct USB data exchange. The Cortex-M3 architecture provides a 32-bit instruction set while retaining an efficient embedded-control architecture. Operating at 32 MHz, or 33.3 DMIPS as identified in the product comparison data, the device provides deterministic processing for protocol handling, peripheral management, and user-interface logic. Low-power operating modes are especially important when the same controller must alternate between active processing, low-power monitoring, and reduced-communication states. Typical uses include USB-connected sensors, portable measurement instruments, compact industrial controllers, medical monitoring equipment, and low-power data loggers. In a sensor node, the MCU can sample analog channels with its ADC, store local information in EEPROM, and transmit results through USB when connected. In a portable instrument, its LCD interface, DAC, and low-power profile support compact user-facing designs without requiring a separate host processor. PCB design should preserve the exact 64-TFBGA land pattern, power distribution, and decoupling arrangement specified by STMicroelectronics. Place each supply capacitor close to its associated device pin, maintain the required power and ground connectivity, and follow the package-specific assembly and layout recommendations. Confirm USB impedance and signal-routing guidance before releasing a high-volume layout. This product record combines the official STM32L151RB family information with distributor and cross-reference findings. It also organizes package, application, replacement, and selection guidance so engineers can identify a verified same-package alternative or determine when redesigning to another STM32 variant is more appropriate than treating a functional equivalent as a drop-in replacement.

詢價 聯絡我們
STM32L151RCT6 - 32MHz Cortex-M3, 256KB Flash MCU | STMicroelectronics
STM32L151RCT6

STM32L151RCT6 - 32MHz Cortex-M3, 256KB Flash MCU | STMicroelectronics

The STMicroelectronics STM32L151RCT6 is an ultra-low-power 32-bit ARM Cortex-M3 microcontroller running at 32 MHz with 256 KB of Flash memory and 64 pins in an LQFP (10x10 mm) package. It integrates USB 2.0 full-speed device, three operational amplifiers, and five low-power modes for battery-critical designs. An ultra-low-power MCU is a microcontroller engineered to minimize energy per operation and standby consumption, sitting within the broader hierarchy of ARM Cortex-M-based microcontrollers under the power-management-optimized IC family. The STM32L1 series uses STMicroelectronics proprietary ultra-low-leakage process technology with autonomous dynamic voltage scaling, allowing the core to run from a scaled supply without external regulation complexity. Key features include 256 KB Flash and 32 KB of ECC-enabled RAM, a 32 MHz Cortex-M3 core, USB FS device support, and 3x integrated op-amps that offload analog signal conditioning from external components. The device operates from a 1.65 V to 3.6 V supply and offers multiple low-power modes down to a low-leakage standby state, making it suited for energy-scavenging and coin-cell products. Technically, the autonomous dynamic voltage scaling regulator adjusts core voltage to the operating frequency, cutting dynamic power while preserving wake-up latency. The five low-power modes (Sleep, Low-power Run, Low-power Sleep, Stop, Standby) let designers trade wake-up time against current draw precisely. Typical applications include battery-powered metering, portable medical monitoring, and industrial sensor nodes using USB connectivity for configuration and data upload. A key design consideration: in Stop and Standby modes the low-speed oscillator domain remains critical for RTC-based wake-up, so layout and clock tree configuration deserve early attention. This page synthesizes distributor pricing, drop-in alternatives, pinout, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
STM32L151RDT6 - 32MHz Cortex-M3 384KB MCU | STMicroelectronics
STM32L151RDT6

STM32L151RDT6 - 32MHz Cortex-M3 384KB MCU | STMicroelectronics

The STMicroelectronics STM32L151RDT6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M3 core, operating at up to 32 MHz with 384 KB of Flash memory in a 64-LQFP 10 x 10 mm package. It combines 48 KB SRAM with USB connectivity, an RTC, LCD drivers, USART, I2C, SPI, timers, a 12-bit ADC, DAC, and comparators. The STM32L151RDT6 is positioned for industrial, medical, consumer, sensor, and connected embedded systems where a compact MCU and a broad peripheral set are valuable. An ultra-low-power microcontroller is an embedded control device designed to maintain useful processing and peripheral performance while minimizing energy consumption. The STM32L1 family combines an Arm Cortex-M3 processor with low-power operating modes, low-leakage peripherals, and multiple clock sources. Within the product hierarchy, the STM32L151RDT6 is a 32-bit microcontroller, MCU, and embedded processor that supports sensor acquisition, communications, data logging, display control, and compact control-system tasks. The principal device characteristics include a 32 MHz maximum CPU frequency, 384 KB of Flash, 48 KB of SRAM, and an additional 12 KB of data memory described for this family. Its integrated connectivity includes USB 2.0, USART, I2C, and SPI interfaces, while the analog and timing resources include a 12-bit ADC, DAC, comparators, timers, an RTC, and LCD drive capability. These functions reduce the need for external components in systems that combine measurement, communications, and local user-interface functions. The STM32L151RD device family is based on the Arm Cortex-M3 architecture and provides multiple peripheral resources for energy-conscious embedded designs. A 12-bit ADC supports analog measurement, while DAC and comparator functions can simplify signal generation, threshold detection, and monitoring. USB connectivity is useful for configuration, data transfer, and firmware update workflows when the system needs a wired interface rather than a wireless protocol. Typical applications include industrial sensor nodes, medical monitoring equipment, USB-connected data loggers, battery-powered instrumentation, display controllers, and compact automation products. The 64-LQFP package also provides enough I/O for external memories, communication transceivers, sensors, and human-interface peripherals without requiring a very fine-pitch BGA footprint. STMicroelectronics lists the STM32L151RD family as an active ultra-low-power MCU product line. Designers should confirm the exact pin functions, power-supply limits, decoupling requirements, clock configuration, and peripheral operating conditions in the manufacturer datasheet before layout release. The LQFP package has exposed leads that simplify inspection and rework, but its 0.5 mm pitch requires careful board design. Firmware should also use the correct device identifiers, memory definitions, startup code, and peripheral initialization sequence for the STM32L151RD variant. This product page combines manufacturer product information, structured technical attributes, package guidance, replacement analysis, and practical application guidance. It helps engineers identify where the STM32L151RDT6 fits, distinguish closely related STM32L151 and STM32L152 variants, and plan sourcing through the Request a Quote workflow.

詢價 聯絡我們
STM32L151VBH6 - 32MHz Cortex-M3 128KB MCU | STMicroelectronics
STM32L151VBH6

STM32L151VBH6 - 32MHz Cortex-M3 128KB MCU | STMicroelectronics

The STMicroelectronics STM32L151VBH6 is an ultra-low-power 32-bit ARM Cortex-M3 microcontroller with a 32 MHz clock, 128 KB of flash memory, and a 100-pin UFBGA package measuring 7 x 7 mm. It is designed for compact embedded systems that require efficient processing, low-power operation, and broad peripheral integration. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one die. Within the product hierarchy, the STM32L151 belongs to the STM32L1 family of 32-bit microcontrollers and combines an ARM Cortex-M3 core with ultra-low-power design techniques. This makes it suitable for battery-powered instruments, industrial sensors, connected equipment, and low-power control modules that must balance processing capability with energy efficiency. The STM32L151VBH6 provides 128 KB of flash, operates at up to 32 MHz, and supports operation from 2.5 V and 3.3 V supply levels. Its 100-UFBGA package offers 100 electrical contacts in a compact 7 x 7 mm footprint. The 128 KB code-storage capacity provides room for embedded control routines, communication protocols, configuration data, and firmware updates, while the 32 MHz Cortex-M3 core supports responsive real-time control. The STM32L151 device family combines an ultra-low-power architecture with extensive peripheral integration. Its 32-bit processing core supports efficient execution of control algorithms and communication tasks. The low-power operating modes are particularly valuable in applications that spend most of their time in sleep or standby conditions, where reducing active energy use extends operating time between battery replacements or service visits. Typical uses include industrial sensor nodes, low-power wireless gateways, building-control terminals, portable measurement equipment, security and access modules, and compact motor-control or condition-monitoring systems. The 100-pin package provides a high pin count for systems requiring several communication interfaces, analog inputs, timers, and general-purpose I/O within a small board area. PCB design should prioritize short return paths for supply and ground, clean routing around sensitive analog inputs, and placement of decoupling capacitors close to the device pins. Because the BGA footprint has a 0.5 mm pitch, assembly capability, solder-paste volume, thermal management, and inspection access should be confirmed before releasing the PCB layout. Firmware configuration and peripheral assignments should also be checked against the exact 100-pin package documentation. This page combines the exact STM32L151VBH6 identification, practical application guidance, package considerations, comparison criteria, and drop-in replacement guidance for engineers evaluating the STM32L1 family in compact low-power designs.

詢價 聯絡我們
STM32L151VBT6 - 32MHz Cortex-M3 128KB MCU | STMicroelectronics
STM32L151VBT6

STM32L151VBT6 - 32MHz Cortex-M3 128KB MCU | STMicroelectronics

The STMicroelectronics STM32L151VBT6 is an ultra-low-power 32-bit ARM Cortex-M3 microcontroller with a 32 MHz maximum clock, 128 KB of Flash memory, and 16 KB of SRAM in a 100-pin LQFP package measuring 14 x 14 mm. It also includes 4 KB of EEPROM and integrated 12-bit ADC and DAC resources, making it suitable for compact control systems that need low-power operation, USB connectivity, LCD control, and analog signal conditioning. A microcontroller is an integrated semiconductor device containing a processor core, nonvolatile program memory, working memory, peripherals, and communication interfaces. In the product hierarchy, the STM32L151VBT6 is an ARM Cortex-M3 MCU within the STM32L1 ultra-low-power family, combining embedded real-time control with low-power management for battery-powered and energy-conscious equipment. The STM32L151VBT6 operates at up to 32 MHz and delivers 1.25 DMIPS/MHz according to the manufacturer information. Its 128 KB Flash supports application firmware, while 16 KB of SRAM provides working space for control routines and data processing. The 4 KB EEPROM allows frequently changed calibration, configuration, or serial data to be retained without consuming Flash space. Its integrated feature set includes a 12-bit ADC, 12-bit DAC, USB, LCD support, programmable voltage detection, brownout reset, and ultra-low-power POR/PDR functions. The device offers a 1 MHz to 24 MHz crystal oscillator range and a 32 kHz oscillator for real-time-clock operation with calibration. These resources reduce external component requirements in sensing, monitoring, and embedded user-interface designs. Typical uses include compact industrial sensors, USB-connected data loggers, low-power instrumentation, LCD-based control panels, battery-powered monitors, and portable measurement equipment. The large 100-pin package exposes substantially more I/O than smaller STM32L1 variants, allowing multiple sensors, displays, communications interfaces, and actuator-control signals to share one controller. Designers should account for the higher pin count and board area when choosing this option, but the LQFP-100 format is particularly useful for through-hole prototyping and automated assembly. Firmware must configure the clock tree, low-power modes, USB transceiver, analog peripherals, and alternate-function routing before the full device capability becomes available. The pin-description and alternate-function tables in the manufacturer datasheet should be used for every PCB assignment. This product page combines the manufacturer-described device characteristics with practical application guidance, footprint selection advice, and electrically focused alternatives. These engineering-oriented details help teams distinguish the STM32L151VBT6 from lower-pin-count, higher-memory, or functionally adjacent STM32L1 devices before committing to a board design.

詢價 聯絡我們
STM32L151VCH6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics
STM32L151VCH6

STM32L151VCH6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics

The STMicroelectronics STM32L151VCH6 is an ultra-low-power 32-bit Arm Cortex-M3 microcontroller with a 32 MHz CPU, 256 KB of Flash memory, 32 KB of SRAM, 8 KB of EEPROM, and USB connectivity in a 100-UFBGA package measuring 7 x 7 mm. It integrates an LCD controller, ADC, DAC, and three operational amplifiers for compact embedded systems requiring broad peripheral integration and low power consumption. An ultra-low-power microcontroller is a semiconductor that balances processing capability with minimized energy use during active, sleep, and low-power operating modes. The STM32L1 family belongs to the broader hierarchy of 32-bit microcontrollers, embedded processors, and semiconductor devices. This combination makes it suitable for battery-operated equipment that must perform control, data acquisition, communications, and user-interface functions without relying on numerous external components. The STM32L151VCH6 reaches 32 MHz while retaining 256 KB of programmable Flash and 32 KB of SRAM. Its integrated USB interface supports connected designs, while the LCD controller can reduce the component count in meter, panel, and portable-instrument applications. Three integrated operational amplifiers can support analog conditioning without requiring separate amplifier packages. The ADC and DAC further consolidate mixed-signal functions around one microcontroller. Its 100-UFBGA package provides 100 electrical connections for the large set of GPIO and peripheral functions. The compact 7 x 7 mm outline saves board area compared with leaded packages, but it requires careful PCB layout, fine-pitch assembly, and inspection. Because the device combines several analog peripherals with an Arm Cortex-M3 core, firmware configuration and analog reference design become important parts of a successful implementation. Typical uses include low-energy sensor nodes, USB-connected data loggers, compact industrial controllers, battery-powered medical instruments, LCD-equipped user interfaces, and general-purpose embedded control boards. The integrated LCD interface is especially useful where a compact display replaces multiple discrete display-driver components, while USB can simplify configuration, data transfer, and firmware update workflows. Design with the supply, decoupling, clock, and analog sections from the manufacturer datasheet. Pay particular attention to BGA pad layout, exposed or routed supply pins, USB impedance-controlled routing, and startup behavior. Confirm the exact temperature range, analog accuracy, and power characteristics required by the application before production release. This page consolidates the manufacturer overview, distributor observations, package information, replacement considerations, and application guidance for engineers evaluating the STM32L151VCH6. It also distinguishes confirmed characteristics from parameters that require confirmation in the complete device documentation.

詢價 聯絡我們
STM32L151VCT6 - 256KB Flash Cortex-M3 MCU | STMicroelectronics
STM32L151VCT6

STM32L151VCT6 - 256KB Flash Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32L151VCT6 is an ultra-low-power 32-bit ARM Cortex-M3 microcontroller with 256 Kbytes of Flash, 32 Kbytes of SRAM, and a 32 MHz CPU, housed in a 100-pin LQFP (14x14 mm) package. According to the ST product page, this device is part of the STM32L1 family, integrates USB FS, three rail-to-rail operational amplifiers, a 12-bit ADC, multiple timers, and standard communication peripherals. What is an ultra-low-power MCU? An ultra-low-power microcontroller is a class of embedded processor specifically designed to minimize active and standby current consumption so that battery-powered products can operate for months or years on a single cell. The technology hierarchy is: MCU -> microcontroller -> embedded processor -> semiconductor IC. The STM32L1 family extends ST's mainstream STM32 architecture into energy-harvesting, metering, medical, and IoT segments where quiescent current in the microampere range and flexible low-power modes are critical. Key features highlighted in the datasheet include seven low-power modes (including Stop and Standby with RTC), a wide 1.65-3.6 V supply range, up to 83 general-purpose I/Os, a 12-bit 1 Msps ADC, two 12-bit DACs, USB 2.0 Full-Speed device, three op-amps, two comparators, and a real-time clock with calendar. The integrated voltage regulator and power-on reset simplify external circuitry, while the Cortex-M3 core supports Thumb-2 instruction set for high code density. The STM32L151VCT6 uses a 32 kHz and an internal 16 MHz high-speed RC oscillator with PLL, eliminating external crystals in many designs. JTAG and SWD debug interfaces support standard toolchains including Keil MDK, IAR EWARM, and STM32CubeIDE. AES 128-bit hardware encryption is included in this density variant of the STM32L1 line for secure connectivity use cases. Typical applications include battery-operated sensor nodes, USB peripherals (HID, CDC), portable medical devices, smart-home IoT endpoints, energy-harvesting designs, and industrial metering. The combination of USB, op-amps, and low-power modes is particularly attractive for compact measurement instruments that must communicate with a host PC. When designing with the STM32L151VCT6, select decoupling capacitors of 100 nF near each VDD pin plus a 4.7 uF bulk capacitor. Verify unused pins are tied to a defined logic level to avoid parasitic current paths. The LQFP-100 footprint has 0.5 mm pitch - use 4-layer PCB with controlled impedance for USB D+/D- traces. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
STM32L151VCT6A - 256KB Flash 32MHz Cortex-M3 MCU | STMicroelectronics
STM32L151VCT6A

STM32L151VCT6A - 256KB Flash 32MHz Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32L151VCT6A is an ultra-low-power 32-bit ARM Cortex-M3 microcontroller with 256KB of Flash memory, 32KB of SRAM, and a 32MHz CPU, housed in a 100-pin LQFP (14x14mm) package. The 'A' suffix denotes the industrial-grade operating temperature range (-40C to +85C) and tape-and-reel packaging. As part of the STM32L1 family, it targets battery-powered and energy-harvesting applications where every microamp counts. A microcontroller (MCU) is a single-chip computer integrating a CPU core, volatile memory (SRAM), non-volatile memory (Flash), and programmable peripherals into one package. The STM32L1 series specifically occupies the 'ultra-low-power' tier of the MCU taxonomy - sitting between general-purpose Cortex-M0/M3 microcontrollers and dedicated signal-processing MCUs - and is hierarchically classified as: microcontroller -> embedded processor -> semiconductor. The L1 family uses ST's proprietary ultra-low-leakage process and an innovative autonomous dynamic voltage scaling (DVS) topology. Key features include 4KB of true EEPROM (a rare find on Cortex-M MCUs), 12-bit ADC, 12-bit DAC, multiple low-power modes (Standby, Stop, Sleep) drawing as little as 1.4 uA in Stop mode with RTC retention, and a built-in USB 2.0 Full-Speed controller with on-chip transceiver. The 100-LQFP package exposes up to 83 GPIO across multiple 5V-tolerant ports, plus USART, SPI, I2C, USB, CAN, and timers. The Cortex-M3 core delivers 1.25 DMIPS/MHz (Dhrystone MIPS) while supporting Thumb-2 instructions for code density. The integrated voltage regulator dynamically scales the internal core voltage based on clock frequency, enabling the dynamic voltage scaling that defines the L1 family. Five low-power modes - Sleep, Low-Power Sleep, Stop with RTC, Standby, and Standby with RTC - allow energy budgets as low as 9 uA/MHz active and 1.4 uA Stop. Typical applications include wearable fitness bands, portable medical sensors, wireless sensor nodes, smart meters, industrial remote controls, and battery-backed IoT devices. The 256KB Flash is sufficient for RTOS-based designs using FreeRTOS or for BLE/ZigBee stacks when paired with a network co-processor. The integrated 4KB EEPROM eliminates the need for external EEPROM in many designs, simplifying BOM and lowering cost. When designing with the STM32L151VCT6A, choose the LQFP-100 footprint for hand-rework-friendly prototypes and migration to other L1 family parts. Verify your Stop-mode current budget against the 1.4 uA typical figure (it rises to several uA with RTC enabled). For 1.8V-3.6V supply, internal voltage regulation is automatic; at lower voltages the integrated POR/PDR handles brownout reset. This page synthesizes distributor pricing from DigiKey and Mouser, drop-in alternatives within the same LQFP-100 package, and practical design notes not found in the manufacturer datasheet - giving engineers a faster path from part selection to prototype.

詢價 聯絡我們
STM32L151VCT6D - 32MHz Cortex-M3 MCU 256KB Flash | STMicroelectronics
STM32L151VCT6D

STM32L151VCT6D - 32MHz Cortex-M3 MCU 256KB Flash | STMicroelectronics

The STMicroelectronics STM32L151VCT6D is an ultra-low-power 32-bit ARM Cortex-M3 microcontroller with 256 Kbytes of Flash, 32 Kbytes of SRAM, and 8 Kbytes of true EEPROM, packaged in a 100-pin LQFP (14x14 mm). Operating at up to 32 MHz, it integrates USB 2.0 Full-Speed, three operational amplifiers, a 12-bit ADC and DAC, an LCD controller, and a wide range of peripherals designed for battery-powered and energy-harvesting applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable I/O peripherals. The Cortex-M3 architecture used in the STM32L151 family provides a 32-bit instruction set with deterministic interrupt handling, sitting in the broader hierarchy ARM Cortex-M -> 32-bit MCU -> embedded processor -> semiconductor. Within ST's portfolio, the STM32L1 series is positioned in the ultra-low-power (ULP) tier, competing with the MSP430 (Texas Instruments) and the EFM32 (Silicon Labs) families. Key specifications include the 256 Kbyte Flash program memory, 32 Kbyte SRAM, 8 Kbyte EEPROM, an operating voltage range of 1.65 V to 3.6 V, a maximum CPU speed of 32 MHz, and an extended industrial temperature range of -40 C to +105 C. The integrated 12-bit ADC delivers up to 1 Msps with multiple channels, while the 12-bit DAC supports low-power waveform generation. Three on-chip op-amps enable direct analog signal conditioning without external components, simplifying sensor-interface designs. The 100-pin LQFP package provides ample GPIO for complex peripheral routing. USB 2.0 Full-Speed with on-chip PHY, multiple USART/UART/SPI/I2C interfaces, and an 8x40 (or 4x44) segment LCD controller make this device well suited for human-machine interfaces and connected sensor nodes. Deep power modes (Standby, Stop with RTC) reach sub-microamp currents, enabling multi-year battery life in metering and IoT applications. Typical applications include industrial wireless sensor nodes, portable medical monitors, smart meters, home automation gateways, asset-tracking tags, and ultra-low-power data loggers. The integrated op-amps are commonly used to amplify signals from thermocouples, photodiodes, and Wheatstone-bridge sensors. When designing with this device, take advantage of the integrated op-amps to reduce BOM and PCB area, but verify that the op-amp bandwidth and rail-to-rail input range meet your sensor signal requirements. The on-chip EEPROM (rather than emulated EEPROM in Flash) provides 100 k erase/write cycles endurance, simplifying data logging. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
STM32L151VDT6 - Ultra-Low-Power ARM Cortex-M3 MCU | STMicroelectronics
STM32L151VDT6

STM32L151VDT6 - Ultra-Low-Power ARM Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32L151VDT6 is an ultra-low-power 32-bit microcontroller based on the ARM Cortex-M3 core, operating at up to 32 MHz. It features 384 KB of Flash memory and 48 KB of SRAM, making it suitable for a wide range of battery-powered and energy-efficient applications. The device is housed in a 100-pin LQFP package (14x14 mm) and supports a supply voltage range of 1.8V to 3.6V. What is an ultra-low-power microcontroller? An ultra-low-power microcontroller is a type of embedded processor designed to minimize energy consumption while maintaining computational capability. It typically integrates multiple low-power modes, such as sleep, stop, and standby, to reduce power draw during idle periods. In the system hierarchy, an ultra-low-power MCU falls under the category of microcontrollers, which are part of embedded systems and integrated circuits. The STM32L1 series is specifically optimized for applications where battery life is critical, such as portable medical devices, smart sensors, and wireless communication nodes. Key features of the STM32L151VDT6 include multiple low-power modes (Sleep, Low-power Run, Low-power Sleep, Stop with RTC, Stop without RTC, Standby with RTC, Standby without RTC), a 12-bit ADC with 1 Msps, two 12-bit DACs, and a wide range of communication interfaces including USART, SPI, I2C, USB, and CAN. The device also integrates a real-time clock (RTC) with calendar and alarm functions, and a true EEPROM emulation capability. Technically, the STM32L151VDT6 is built on a 130nm process technology, which contributes to its low power consumption. The core operates at 1.8V to 3.6V, and the device can run at up to 32 MHz. The Flash memory is organized with 4x64 KB sectors, and the SRAM is 48 KB. The device supports a wide operating temperature range of -40°C to +85°C, making it suitable for industrial applications. Typical applications include portable medical devices (e.g., glucose meters, pulse oximeters), smart meters, wireless sensor nodes, and industrial control systems. The ultra-low-power modes allow the MCU to operate for years on a single coin cell battery in applications with low duty cycles. When designing with this device, it is important to consider the power supply decoupling: place a 100nF capacitor close to each VDD pin and a 4.7uF capacitor at the main power input. Additionally, the VBAT pin should be connected to a backup battery or a capacitor to maintain RTC operation during main power loss.

詢價 聯絡我們
STM32L151ZET6 - 32MHz Cortex-M3 512KB MCU | STMicroelectronics
STM32L151ZET6

STM32L151ZET6 - 32MHz Cortex-M3 512KB MCU | STMicroelectronics

The STMicroelectronics STM32L151ZET6 is an ultra-low-power 32-bit ARM Cortex-M3 microcontroller operating at up to 32 MHz, with 512 KB of embedded Flash memory, 80 KB of SRAM, USB, and two operational amplifiers, housed in a 144-LQFP 20 x 20 mm package. The verified distributor data identifies a 2.5 V to 3.3 V supply arrangement, 115 GPIO, 12-bit and 12-bit conversion resources, and an industrial temperature range of -40 °C to +85 °C. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The STM32L1 family belongs to the broader hierarchy of microcontroller, embedded processor, semiconductor, and electronic-component categories. The STM32L151ZET6 is intended for designs that require substantial embedded memory, a large pin count, low-power operation, USB connectivity, and analog signal conditioning in a single package. The STM32L151ZET6 combines a 32 MHz ARM Cortex-M3 processor with 512 KB of Flash and 80 KB of SRAM. Its 144-pin LQFP package provides 115 GPIO according to the verified listing, enabling extensive connections to sensors, actuators, human-interface interfaces, communications equipment, and external memory or peripheral devices. The integrated USB interface and dual operational amplifiers reduce the need for separate support components in suitable USB-enabled and analog designs. The STM32L1 architecture is positioned for low-power embedded systems where energy efficiency and control capability are both important. Its supply range, conversion resources, GPIO count, and memory capacity make it suitable for industrial control, data acquisition, USB peripherals, communications equipment, and embedded instrumentation. The large 144-LQFP footprint is useful when the design requires many discrete I/O connections and offers straightforward assembly in through-hole-compatible production processes. Because the verified data does not include the complete electrical limits, peripheral map, watchdog details, clock-tree configuration, or a manufacturer-authoritative pinout, those values should be confirmed in the STMicroelectronics device documentation before schematic capture or PCB release. The 115-GPIO figure, 512 KB Flash, 80 KB SRAM, 32 MHz maximum CPU frequency, USB capability, dual operational amplifiers, and -40 °C to +85 °C range are directly reflected in the supplied distributor information. Pricing shown here reflects the quoted distributor unit price as of 2026-10-30 and may change with quantity and market conditions. This page combines verified sourcing data, practical application fit, package information, and a conservative comparison of available drop-in information. The replacement search identified STM32L152ZET6 as the closest documented same-package family alternative, while the broader cross-reference results caution that pin compatibility alone does not guarantee code, timing, or peripheral equivalence.

詢價 聯絡我們
STM32L152C8T6 - 32MHz Cortex-M3 64KB MCU | STMicroelectronics
STM32L152C8T6

STM32L152C8T6 - 32MHz Cortex-M3 64KB MCU | STMicroelectronics

STMicroelectronics STM32L152C8T6 is an ultra-low-power, 32-bit ARM Cortex-M3 microcontroller rated at up to 32 MHz, with 64 KB of embedded Flash memory and a 48-pin LQFP package measuring 7 x 7 mm. It is designed for compact embedded systems that require efficient control processing, low-power operation, and integrated communications or analog functions. A microcontroller is a programmable semiconductor device that combines a processor core, memory, and peripherals on one integrated circuit. Within the product hierarchy, the STM32L152C8T6 is an ARM Cortex-M3 microcontroller, an ultra-low-power MCU, and a member of STMicroelectronics' STM32L1 family. This positioning makes it suitable for battery-powered instruments, industrial sensing nodes, portable medical devices, and connected products that need more capability than an 8-bit MCU without requiring a high-performance application processor. The verified product information identifies a 32-bit architecture, 32 MHz operating frequency, and 64 KB Flash configuration. The STM32L1 family information also identifies LCD, USB, ADC, DAC, 128 KB Flash, 16 KB SRAM, and 4 KB EEPROM capabilities for the broader family; applicability of every family-level function to this exact 64 KB device must be confirmed in the manufacturer datasheet and reference manual before design release. The STM32L152C8T6 combines a 48-LQFP surface-mount footprint with an ARM Cortex-M3 instruction set. Its 64 KB Flash configuration is intended for firmware, boot code, and embedded application logic, while the ultra-low-power family architecture supports designs in which average energy consumption matters more than sustained processing throughput. The 32 MHz clock rating provides additional performance margin for control loops, communication protocols, and human-machine interface work. Typical uses include low-energy sensor acquisition systems, compact data loggers, medical monitoring equipment, industrial control modules, LCD-equipped user interfaces, and USB-connected embedded products. The LCD and USB capabilities are particularly relevant where a compact display or wired data connection is required without adding a separate interface IC. PCB design should preserve the 48-pin LQFP land pattern, maintain adequate power and decoupling distribution, and follow the manufacturer's pin, voltage, and peripheral multiplexing instructions. Because several STM32L1 functions can share pins, verify the exact alternate-function assignment for USB, LCD, ADC, DAC, and communication interfaces against the device pinout. This page combines verified manufacturer and distributor information with practical replacement guidance, package-focused comparisons, and design considerations. It distinguishes exact 64 KB variants from related memory configurations so engineers can evaluate compatibility without treating every STM32L1 part as a true drop-in replacement.

詢價 聯絡我們
STM32L152C8U6 - 32MHz Cortex-M3 64KB MCU | STMicroelectronics
STM32L152C8U6

STM32L152C8U6 - 32MHz Cortex-M3 64KB MCU | STMicroelectronics

The STMicroelectronics STM32L152C8U6 is an ultra-low-power 32-bit ARM Cortex-M3 microcontroller rated at 32 MHz, with 64 KB of Flash memory and 48-pin UFQFPN packaging at 7 mm by 7 mm. The listing identifies an MCU rather than a discrete power device, so its main design value is integrated control, communication, analog conversion, and low-power management. A microcontroller is a semiconductor that executes embedded firmware from nonvolatile Flash memory and coordinates a system’s sensors, communications, timers, and actuators. The STM32L1 series belongs to the ARM Cortex-M3 microcontroller hierarchy and combines processor performance, memory, serial interfaces, analog peripherals, and power-management functions on one integrated circuit. This makes the STM32L152C8U6 suitable for compact embedded products that need several peripherals without a discrete processor. Verified distributor information identifies a 32-bit architecture, 32 MHz operating frequency, 64 KB Flash, and 48-pin UFQFPN package. Search results also describe the family as ultra-low power and list RTC, LCD, USB, USART, I2C, SPI, timers, ADC, DAC, and comparators. A secondary result snippet additionally reports 128 KB Flash, 16 KB SRAM, and 4 KB EEPROM for STM32L152-family documentation, but that conflicts with the exact-part DigiKey result identifying this orderable MPN as 64 KB; the exact MPN listing is therefore used. The peripheral mix makes the device useful for USB-connected sensing, industrial data acquisition, meter and instrument control, low-power monitoring, and LCD-based user interfaces. Its 32 MHz Cortex-M3 core provides a common ARM software ecosystem, while ADC, DAC, and comparator resources can reduce the need for external signal-conditioning or conversion components. Firmware compatibility, peripheral availability, and electrical limits must still be checked against the exact STM32L152C8U6 datasheet. A critical design consideration is that the 48-pin UFQFPN package exposes an exposed thermal and electrical pad whose connection requirements must follow the manufacturer land pattern. Decoupling, exposed-pad soldering, clock stability, and analog grounding should be planned before PCB release. Because the supplied source snippets do not provide a complete verified pin list, no guessed pin assignments are used here. This page consolidates exact distributor and manufacturer-source facts, identifies uncertainty where snippets conflict, and avoids treating generic STM32L1 family features as exact specifications unless the provided evidence identifies them for STM32L152C8U6. It also distinguishes verified sourcing information from parameters requiring confirmation in the full manufacturer datasheet.

詢價 聯絡我們
STM32L152CBT6 - 32MHz Cortex-M3 128KB MCU | STMicroelectronics
STM32L152CBT6

STM32L152CBT6 - 32MHz Cortex-M3 128KB MCU | STMicroelectronics

STMicroelectronics STM32L152CBT6 is a 32-bit ARM Cortex-M3 microcontroller with 128KB of flash memory, a 32MHz maximum clock, and a 48-pin LQFP package measuring 7 x 7 mm. It belongs to the STM32L1 ultra-low-power MCU family and combines an energy-efficient 32-bit core with 12-bit peripheral capabilities for battery-powered, industrial, sensor, and low-power embedded systems. An ultra-low-power microcontroller is a semiconductor designed to complete embedded control tasks while consuming as little energy as practical. The STM32L1 family belongs to the broader hierarchy of embedded processors, microcontrollers, 32-bit ARM microcontrollers, and power-management-oriented embedded devices. This combination makes the STM32L152CBT6 suitable for systems that must monitor sensors, control actuators, and manage communications over long operating periods between maintenance cycles. The device provides 128KB of flash memory for program storage and operates at up to 32MHz. Its 48-LQFP package exposes the GPIO, communication, debug, clock, and power functions required by a medium-complexity embedded design. The STM32L152CBT6 also belongs to the STM32L152 device family, which is identified in the product listing as an ultra-low-power Cortex-M3 MCU with LCD-oriented features. Confirm the complete peripheral and electrical details against the manufacturer datasheet before finalizing a design. The principal architectural benefit is the combination of a 32-bit ARM Cortex-M3 processing core with low-power-oriented design in a conventional 7 x 7 mm LQFP footprint. This architecture is useful when firmware requires more general computation than an 8-bit MCU while the product must still operate from a constrained energy budget. The package offers enough pin count for external sensors, displays, communication transceivers, and general-purpose control signals. Typical applications include low-power sensor nodes, industrial monitoring equipment, compact data-acquisition devices, battery-powered controllers, LCD-equipped human-interface equipment, and embedded systems requiring multiple peripheral functions around a single microcontroller. The target device can also support connected measurement systems where its flash capacity accommodates application firmware, configuration data, and protocol handling. For PCB implementation, follow the manufacturer pin-description and land-pattern tables when assigning tracks and decoupling. Pay particular attention to supply-voltage limits, oscillator connections, reset behavior, boot configuration, and exposed ground requirements. Firmware changes should also account for the STM32L152 family option-byte and low-power-mode behavior rather than assuming the behavior of a general-purpose STM32 device. This page combines package, memory, clock, lifecycle, sourcing, and replacement information with application guidance and engineering-oriented comparisons. It also identifies which substitute candidates have documented package and memory compatibility, helping designers distinguish a mechanically similar MCU from a part that can actually be considered for a drop-in redesign.

詢價 聯絡我們
STM32L152CCT6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics
STM32L152CCT6

STM32L152CCT6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics

The STMicroelectronics STM32L152CCT6 is an ultra-low-power 32-bit microcontroller built around an ARM Cortex-M3 core operating up to 32 MHz. It provides 256 Kbytes of Flash memory, 32 Kbytes of SRAM, 8 Kbytes of EEPROM, USB connectivity, LCD support, ADC, DAC and two operational amplifiers, and is supplied in a 48-LQFP 7 x 7 mm package. An ultra-low-power microcontroller is a semiconductor device designed to maintain useful processing performance while minimizing energy consumption during active operation, sleep modes, and standby states. The STM32L1 family combines an Arm Cortex-M3 processor with power-management features intended for battery-operated, portable, industrial, medical, and sensor-based products. STM32L152CCT6 is positioned for designs requiring USB connectivity and a relatively large memory configuration without moving to a higher-performance MCU family. The principal features include 32 MHz maximum CPU frequency, 256 Kbytes of embedded Flash, 32 Kbytes of SRAM, 8 Kbytes of EEPROM, USB, LCD interface capability, 12-bit ADC and DAC resources, and two operational amplifiers. The 48-LQFP package provides a conventional leaded surface-mount format suitable for industrial control boards, instruments, gateways, and compact embedded equipment. Its combination of USB, analog peripherals, and low-power processing makes it useful for portable data-acquisition and connected-control designs. The STM32L152CCT6 uses the Arm Cortex-M3 architecture and supports a broad peripheral set for embedded control. USB connectivity allows the MCU to act as a USB device, while the LCD interface supports display-oriented products. The ADC and DAC provide analog measurement and output capability, and the integrated operational amplifiers can reduce external analog component count in suitable signal-conditioning circuits. Firmware can be organized around standard embedded-control tasks, USB connectivity, display updates, and sensor acquisition rather than requiring separate peripheral devices. Typical applications include industrial sensor nodes, USB-to-serial data acquisition modules, compact instrumentation, medical monitoring equipment, battery-powered handheld products, USB-connected control panels, and low-energy embedded gateways. The 32 MHz core and 256 Kbytes of Flash provide useful headroom for protocol stacks and application firmware. The integrated analog resources are especially helpful where board area, standby power, and component count are important design constraints. When laying out a design, place decoupling capacitors close to each supply pin and route USB differential pairs as a controlled-impedance, tightly coupled pair on a multilayer PCB. Confirm the exact pin assignment and alternate-function requirements in the manufacturer pinout table before assigning LCD, USB, ADC, DAC, or operational-amplifier functions. The MCU also requires the appropriate clock, reset, boot, and programming connections specified by STMicroelectronics. This product summary combines manufacturer family information, distributor attributes, package details, connectivity features, and application-specific design guidance. It is intended to help engineers evaluate STM32L152CCT6 for USB-enabled, low-power embedded systems while separating confirmed device characteristics from parameters that still require review against the complete manufacturer datasheet.

詢價 聯絡我們
STM32L152QCH6 - 32MHz 256KB Flash USB MCU | STMicroelectronics
STM32L152QCH6

STM32L152QCH6 - 32MHz 256KB Flash USB MCU | STMicroelectronics

The STMicroelectronics STM32L152QCH6 is an ultra-low-power 32-bit ARM Cortex-M3 microcontroller operating at 32 MHz with 256 KB of Flash memory in a 132-UFBGA package measuring 7 x 7 mm. It is designed for embedded applications that require USB connectivity, low-power operation, and a compact surface-mount footprint. What is an ultra-low-power microcontroller? An ultra-low-power MCU is a semiconductor controller designed to complete its processing function while consuming minimal energy, especially during sleep, stop, and standby modes. The STM32L1 MCU family combines an ARM Cortex-M3 processor, embedded memory, peripheral interfaces, and power-management capabilities into one device. STM32L152QCH6 belongs to the STM32L15 low-power MCU family and is suited to portable, industrial, sensor, and connected embedded systems. Verified product information identifies a 32-bit ARM Cortex-M3 core, a maximum stated operating frequency of 32 MHz, 256 KB of Flash, USB connectivity, and an 8 microsecond wake-up time. These features support responsive low-power operation while retaining sufficient processing capability for protocol handling, control logic, data acquisition, and low-power communications. The 132-UFBGA package provides a compact 7 x 7 mm solution for space-constrained boards. The STM32L152QCH6 is part of the STM32L15 ultra-low-power platform. Its USB capability makes it relevant to devices requiring a standards-based USB interface, while the microcontroller architecture supports real-time embedded control. Compared with a general-purpose microcontroller, the low-power focus is useful when the duty cycle is intermittent or when battery life, standby consumption, and wake-up behavior are important design objectives. Typical applications include USB-connected sensor nodes, compact industrial controllers, low-power data loggers, medical and diagnostic equipment, portable monitoring devices, and embedded systems that need a small Cortex-M3 controller. The device can serve as a system controller when the application requires USB connectivity and low-power behavior rather than high multimedia processing. Designers should verify the exact pinout, power requirements, clock configuration, USB routing, decoupling, and programming workflow against the STMicroelectronics datasheet before layout or firmware deployment. Because the supplied verified data does not include a complete manufacturer pin table, package dimensions beyond the stated 7 x 7 mm package, or a verified unit-price schedule, those details should not be inferred. The part should be selected only after checking the complete electrical and mechanical requirements for the target design.

詢價 聯絡我們
STM32L152R6T6A - 32KB Flash Cortex-M3 MCU w/ USB & LCD
STM32L152R6T6A

STM32L152R6T6A - 32KB Flash Cortex-M3 MCU w/ USB & LCD

The STMicroelectronics STM32L152R6T6A is an ultra-low-power 32-bit ARM Cortex-M3 microcontroller with 32 KB of Flash, 32 MHz CPU, integrated LCD driver and full-speed USB 2.0 connectivity, housed in a 64-pin LQFP (10x10 mm) package. It is part of the STM32L1 ultra-low-power family with the "-A" automotive suffix, supporting 1.65 V to 3.6 V supply operation and embedding up to 10 KB of SRAM plus 4 KB of true EEPROM. An ARM Cortex-M3 microcontroller is a 32-bit RISC processor core designed for embedded applications that require deterministic real-time response, low interrupt latency, and high code density through the Thumb-2 instruction set. In the broader taxonomy, the STM32L152 sits at the intersection of microcontroller (MCU), ultra-low-power MCU, mixed-signal MCU (with LCD + USB), and 32-bit MCU. The STM32L1 family is the silicon ancestor of the STM32L0, L4, L4+, U5 and H5 lines, all sharing ST's ultra-low-power工艺 philosophy and the Cortex-M lineage. Key differentiating features include five low-power modes (Sleep, Low-Power Sleep, Stop with RTC, Standby with RTC, and Stop without RTC) reaching 1.4 µA in Stop-with-RTC, an integrated LCD driver for up to 8x40 segments directly driving glass, a 12-bit ADC and 12-bit DAC, multiple timers, and a USB 2.0 full-speed device/host/OTG controller. The embedded voltage regulator, multiple DMA controllers, and the standard STM32 peripheral set (USART, SPI, I2C, USB, GPIO) make it a system-in-package for many battery-powered designs. Architecturally, the Cortex-M3 core runs up to 32 MHz with 1.25 DMIPS/MHz, paired with ST's ultra-low-power工艺 and a 1.8 V internal core domain. The ART Accelerator (no instruction-cache pre-fetch on L1, but a flash-accelerator block) keeps execution deterministic from Flash, and the MPU supports up to 8 regions. Compared with the older STM32F1 series, the L1 trades raw MHz for dramatically lower active and standby power. Typical applications include battery-powered metering (gas/water/heat) with direct LCD readout, portable medical sensors, fitness wearables, GPS asset trackers, and industrial sensor nodes requiring USB-CDC for service. The integrated LCD driver saves a costly external charge-pump driver and lets a single chip display digits on a static, multiplexed or capacitive-effect glass. When designing with this device, choose the LQFP-64 (R suffix in the line-up) over QFN if you need hand-rework-friendly pins or expect hand-prototype workflows; QFN variants are footprint-compatible at the die level but require careful PCB thermal design. Verify the LCD glass type (static, 1/2, 1/3, 1/4 duty, and bias) and segment count early in the schematic phase - the LCD peripheral supports up to 8 commons, but pin budget and alternate-function remap must be planned. This page synthesizes distributor pricing, drop-in alternatives across the STM32L1 line, automotive-grade sibling MPNs, and practical low-power design notes that go beyond what is on the ST datasheet alone.

詢價 聯絡我們
STM32L152RBT6 - 32MHz Cortex-M3 USB MCU | STMicroelectronics
STM32L152RBT6

STM32L152RBT6 - 32MHz Cortex-M3 USB MCU | STMicroelectronics

The STMicroelectronics STM32L152RBT6 is a 32-bit Arm Cortex-M3 microcontroller operating at 32 MHz, with 128 KB of Flash memory, 32 KB of SRAM, and USB connectivity in a 64-LQFP 10 x 10 mm package. The STM32L152 series combines an ultra-low-power design with LCD, ADC, DAC, and USB capabilities for compact embedded systems. A microcontroller is a semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The STM32L152 belongs to the STM32L1 ultra-low-power MCU family and the broader Arm Cortex-M embedded ecosystem. This hierarchy gives designers a compact platform for battery-powered sensors, industrial controls, human-machine interfaces, and USB-connected portable equipment without requiring a separate processor and supporting ICs. The STM32L152RBT6 provides 128 KB of Flash for firmware and 32 KB of SRAM for working memory. Its feature set includes USB, an LCD interface, ADC, and DAC. USB connectivity supports direct peripheral-to-host or peripheral-to-peripheral data exchange, while the LCD interface reduces the component count of display-based products. The ADC and DAC support analog measurement and signal-generation functions around the digital control core. Based on the Arm Cortex-M3 architecture, the device delivers 32-bit processing at 32 MHz. The STM32L152 family is positioned for designs that need more connectivity and analog resources than a basic low-power MCU while retaining a compact 64-pin package. The 64-LQFP package also exposes more I/O than smaller leaded packages, simplifying direct connections to displays, sensors, USB transceivers, and external analog circuitry. Typical uses include low-power data loggers, compact environmental monitors, USB-connected instruments, industrial control modules, and display terminals. The LCD interface is particularly useful for local status displays, while USB can simplify configuration, firmware exchange, or communication with a host computer. The ADC supports sensor conditioning, and the DAC can generate controlled analog output where the application requires it. PCB design should preserve short USB differential traces, provide solid ground-plane continuity, and place decoupling capacitors close to the device power pins. Signal integrity on USB, LCD, and analog interfaces should be checked against the clock, load, and cable requirements of the selected application. Firmware, peripheral configuration, and package-level pin assignments must be reviewed before substituting any electrically related device. This product page consolidates the manufacturer device information, distributor records, package details, comparison parameters, and practical integration guidance into one engineering reference. It also distinguishes exact drop-in candidates from related STM32 variants so engineers can review compatibility rather than relying on package similarity alone.

詢價 聯絡我們
STM32L152RCT6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics
STM32L152RCT6

STM32L152RCT6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics

STMicroelectronics STM32L152RCT6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M3 core, operating at up to 32 MHz with 256 KB of Flash memory in a 64-LQFP 10 x 10 mm package. The device integrates 32 KB SRAM, 8 KB EEPROM, USB, LCD, ADC, DAC, and three operational amplifiers for compact embedded designs. An ultra-low-power microcontroller is an embedded semiconductor that balances processing capability, standby current, active current, and integrated peripherals to serve battery-powered and energy-conscious equipment. The STM32L1 series belongs to the Arm Cortex-M microcontroller family and combines general-purpose control, data acquisition, communications, and low-power operation in one package. The STM32L152RCT6 provides 256 KB of Flash for firmware, 32 KB of SRAM for working memory, and 8 KB of EEPROM for nonvolatile data. Its 32 MHz Cortex-M3 core supports deterministic real-time control, while USB and LCD connectivity broaden its use in portable instruments, human-interface devices, and connected embedded products. Integrated ADC, DAC, and three op-amps reduce the need for external analog components. The STM32L152 family combines conventional embedded-control capabilities with low-power operating modes suited to battery-operated equipment. Its integrated analog resources can support sensor conditioning, signal generation, and direct monitoring of physical inputs, while USB connectivity can simplify attachment to a host computer or USB-powered peripheral. Typical uses include portable medical and industrial measurement equipment, USB-connected data loggers, compact human-interface panels, low-power sensor nodes, and general embedded-control boards. The 64-LQFP package provides enough I/O for mixed analog and digital designs while remaining compatible with standard surface-mount manufacturing. When laying out the board, follow the manufacturer pin-definition and alternate-function tables, place decoupling capacitors close to the supply pins, and preserve the recommended analog-ground and USB-routing topology. Firmware replacement should also account for differences in clock setup, low-power modes, peripheral pin assignments, and USB initialization. This page combines the STM32L152RCT6's core specifications with practical selection guidance, package considerations, and same-footprint replacement analysis for engineers evaluating 64-LQFP STM32L1 designs.

詢價 聯絡我們
STM32L152VCH6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics
STM32L152VCH6

STM32L152VCH6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics

STMicroelectronics STM32L152VCH6 is a 32-bit ARM Cortex-M3 microcontroller with a 32 MHz maximum CPU frequency, 256 KB of Flash memory, and a 100-UFBGA 7 x 7 mm package. It combines an embedded MCU core, program memory, SRAM, and low-power peripherals in a compact surface-mount package suited to space-constrained embedded systems. A microcontroller is a semiconductor device that integrates a CPU, memory, and peripherals into one programmable component. The STM32L152 belongs to STMicroelectronics' STM32L1 family, where low-power design requirements are combined with a 32-bit Cortex-M3 processing architecture. Its position between a general-purpose microcontroller and a dedicated application controller makes it suitable for products that need flexible firmware, low standby power, and multiple communication or sensing functions. The verified device specification identifies a 32-bit Cortex-M3 core, 32 MHz operating frequency, and 256 KB of Flash organized as 256K x 8. The exact SRAM capacity, operating-voltage range, ADC resolution, interface inventory, and detailed timing ratings should be confirmed in the manufacturer datasheet before schematic capture or firmware configuration. The LCD-related description associated with this device further indicates suitability for embedded human-interface applications. The STM32L152VCH6 uses a 100-UFBGA package measuring 7 x 7 mm. This dense land-grid array requires a multilayer PCB with vias, fine-pitch routing, and careful escape routing from the package balls. Unlike a leaded package, the UFBGA has no protruding leads, which supports compact designs but increases assembly and inspection complexity. Typical applications include low-power sensor nodes, industrial monitoring equipment, portable data loggers, medical and health monitoring products, compact control modules, and connected embedded products. The 32 MHz Cortex-M3 core can execute control logic, protocol handling, and display-related tasks, while the low-power STM32L1 platform is appropriate for products that spend substantial time in low-energy operating states. Design work should begin with the manufacturer pin-description table and reference design for the 100-UFBGA footprint. Confirm exposed-pad or thermal-array requirements, power pins, decoupling, programming access, reset behavior, and all peripheral multiplexing before layout release. PCB assembly also requires suitable stencil, paste, reflow, and X-ray inspection plans because the 100-ball geometry can hide solder-joint defects. This product page combines the exact ordering code and verified catalog description with focused guidance on package complexity, low-power design checks, and sourcing workflow. It is intended to help engineers identify the correct MCU, assess board-level implications, and request a quote without replacing the manufacturer datasheet as the final design authority.

詢價 聯絡我們
STM32L152VCT6 - 32MHz Cortex-M3 MCU 256KB Flash | STMicroelectronics
STM32L152VCT6

STM32L152VCT6 - 32MHz Cortex-M3 MCU 256KB Flash | STMicroelectronics

The STMicroelectronics STM32L152VCT6 is an ultra-low-power 32-bit ARM Cortex-M3 microcontroller with 256KB Flash memory, 32KB SRAM, 8KB EEPROM, a 32MHz CPU, USB connectivity, LCD support, and integrated analog peripherals. It is packaged in a 100-lead LQFP package. The STM32L152VCT6 combines low-power operation with the connectivity and analog capabilities required for compact embedded systems, portable instruments, human-interface devices, and USB-connected equipment. An ultra-low-power microcontroller is a semiconductor device designed to minimize energy consumption while maintaining responsive application performance. The STM32L152 series belongs to the ARM Cortex-M3 microcontroller family within the broader embedded-processor and power-management ecosystem. Its combination of sleep modes, fast wake-up capability, USB, LCD support, ADC, DAC, timers, and communication peripherals allows a design to replace several discrete components while conserving board area. Key features include a 32-bit Cortex-M3 processor operating up to 32MHz, 256KB of embedded Flash for firmware, 32KB of SRAM, and 8KB of EEPROM. The device includes USB connectivity, LCD controller support, ADC and DAC resources, and multiple communication interfaces suited to embedded control systems. Its 100-lead LQFP package provides a high pin count for analog, communication, debug, and general-purpose I/O access. The Cortex-M3 architecture provides a compact instruction set, deterministic interrupt handling, and efficient execution of embedded control code. Programmable peripherals and direct memory access support responsive sensor acquisition, communication, display updates, and motor or actuator control. The STM32L152VCT6 is therefore suitable for designs that need more processing capability and connectivity than a basic 8-bit controller while retaining a low-power-oriented platform. Typical applications include USB-connected data loggers, low-power industrial sensor nodes, portable measurement equipment, LCD-based user interfaces, medical monitoring devices, security and access-control terminals, and energy-conscious consumer products. The LCD interface is useful for local status displays, while USB simplifies connection to a host computer or charging and configuration environment. Designers should use the manufacturer pin-description table and reference manual when assigning the 100 LQFP leads, planning power, grounding, clock, and debug connections, and confirming peripheral alternate functions. The 1.8V, 2.5V, and 3.3V supply options support multiple embedded platforms, but the selected regulator, decoupling strategy, and operating voltage must be coordinated with the device's electrical limits. PCB layout should preserve clean analog grounding and controlled clock routing. This product page combines manufacturer specifications, searchable MPN details, application guidance, design notes, and a careful comparison with related STM32L-series devices. It is intended to help engineers identify whether the STM32L152VCT6's balance of Flash memory, USB, LCD support, analog resources, low-power behavior, and LQFP-100 footprint fits the target design.

詢價 聯絡我們