STM32L152RCT6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics
MPN: STM32L152RCT6 ✓ 啟用中STM32L152RCT6 概覽
An ultra-low-power microcontroller is an embedded semiconductor that balances processing capability, standby current, active current, and integrated peripherals to serve battery-powered and energy-conscious equipment. The STM32L1 series belongs to the Arm Cortex-M microcontroller family and combines general-purpose control, data acquisition, communications, and low-power operation in one package.
The STM32L152RCT6 provides 256 KB of Flash for firmware, 32 KB of SRAM for working memory, and 8 KB of EEPROM for nonvolatile data. Its 32 MHz Cortex-M3 core supports deterministic real-time control, while USB and LCD connectivity broaden its use in portable instruments, human-interface devices, and connected embedded products. Integrated ADC, DAC, and three op-amps reduce the need for external analog components.
The STM32L152 family combines conventional embedded-control capabilities with low-power operating modes suited to battery-operated equipment. Its integrated analog resources can support sensor conditioning, signal generation, and direct monitoring of physical inputs, while USB connectivity can simplify attachment to a host computer or USB-powered peripheral.
Typical uses include portable medical and industrial measurement equipment, USB-connected data loggers, compact human-interface panels, low-power sensor nodes, and general embedded-control boards. The 64-LQFP package provides enough I/O for mixed analog and digital designs while remaining compatible with standard surface-mount manufacturing.
When laying out the board, follow the manufacturer pin-definition and alternate-function tables, place decoupling capacitors close to the supply pins, and preserve the recommended analog-ground and USB-routing topology. Firmware replacement should also account for differences in clock setup, low-power modes, peripheral pin assignments, and USB initialization.
This page combines the STM32L152RCT6's core specifications with practical selection guidance, package considerations, and same-footprint replacement analysis for engineers evaluating 64-LQFP STM32L1 designs.
直接替換替代品,適用於 STM32L152RCT6 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: STM32L152RCT6 (相同外形與佔位) — 差異在於 Flash Memory, Package, ADC, Communication Interfaces, Core.
STM32L162RCT6
✅ 直接替換✗ 缺貨
$2.8636 / 單位
查看資料表 →STM32L152RDT6
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32L152RET6
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32L152RBT6
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →STM32L162RDT6
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32L152RCT6 最大額定值與電氣特性
| Product Type | 32-bit ultra-low-power microcontroller |
| CPU Core | Arm Cortex-M3 |
| Maximum CPU Frequency | 32 MHz |
| Architecture | 32-bit ARM |
| Flash Memory | 256 KB (256K x 8) |
| SRAM | 32 KB |
| EEPROM | 8 KB |
| Integrated Connectivity | USB and LCD |
| ADC | Integrated |
| DAC | Integrated |
| Operational Amplifiers | 3 integrated |
| 封裝 | 64-LQFP (10 x 10 mm) |
| 腳位數 | 64 pins |
| 安裝類型 | Surface mount |
STM32L152RCT6 64-lqfp (10 x 10 mm) 腳位配置指南
STM32L152RCT6(64-lqfp (10 x 10 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM32L152RCT6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32L152RCT6 適用於 6 應用s: USB Connected Sensor Logger, Portable Medical Monitoring, Industrial Sensor Node, LCD Control Panel, Low-Power Data Acquisition System, USB Powered Test and Control Device.
USB Connected Sensor Logger
The STM32L152RCT6 fits portable data-acquisition equipment that must collect sensor data, retain configuration, and transfer records through USB. Its 32 MHz Arm Cortex-M3 core provides real-time control, while 256 KB of Flash holds application firmware and 8 KB of EEPROM preserves calibration or logging parameters. The integrated 12-bit-class ADC capability should be confirmed against the datasheet for the selected channel configuration, and the three internal operational amplifiers can assist with conditioning when their electrical limits are observed. USB removes the need for a separate communications IC, while the 64-LQFP package provides adequate GPIO for sensors, status indicators, and control outputs. The main design considerations are USB signal routing, supply decoupling, firmware support for the USB peripheral, and ensuring the chosen operating mode meets the logger's power budget.
推薦
Portable Medical Monitoring
The STM32L152RCT6 supports compact monitoring instruments where low-power operation, mixed signal handling, and a conventional fine-pitch package are valuable. The 32 MHz Cortex-M3 core can process sensor information, the ADC supports analog measurement channels, and the DAC can generate test or control signals. The three integrated operational amplifiers may reduce the component count in suitable front-end designs, although medical designs must verify noise, accuracy, leakage, and isolation requirements against the manufacturer electrical characteristics. The 256 KB Flash and 32 KB SRAM are suitable for moderate embedded workloads without an external memory device. Battery operation also makes low-power state transitions central to the design. Confirm the applicable regulatory strategy, electrode protection network, calibration method, and isolation architecture before using this microcontroller in a medical product.
推薦
Industrial Sensor Node
The STM32L152RCT6 is appropriate for compact industrial monitoring modules that combine analog sensing, local control, and limited communications. Its 256 KB Flash and 32 KB SRAM provide space for protocol handling and application logic, while the integrated ADC reduces the need for a separate converter when the required resolution and sample rate are supported. The three operational amplifiers can support low-level sensor conditioning or output buffering within their stated limits. The 64-LQFP package exposes more I/O than a compact leadless MCU, making it useful for multiple digital inputs, relay-control outputs, status LEDs, and service interfaces. Industrial implementation should account for transient protection, grounding, calibration, watchdog strategy, and thermal performance. Because the target MPN does not include Ethernet, a higher-level gateway is required for networked plant data.
推薦
LCD Control Panel
The STM32L152RCT6 can serve as the controller for a compact human-interface panel because it combines an LCD interface with a 32 MHz Cortex-M3 core and 64 GPIO in a 10 x 10 mm LQFP package. The LCD controller reduces the need for an external display driver, while the ADC and three op-amps can support touch or analog front-end functions when electrically appropriate. With 256 KB Flash and 32 KB SRAM, the device can manage display state, input handling, and application logic in one package. The LCD panel's logic levels, timing, contrast, and backlight requirements must be checked against the MCU specifications. Layout should separate analog and digital return paths, keep LCD and switching-node traces away from sensitive analog inputs, and follow the manufacturer's recommended capacitor placement. Firmware should also include conservative initialization delays and ESD protection appropriate to the enclosure and user interface.
推薦
Low-Power Data Acquisition System
The STM32L152RCT6 targets acquisition systems that alternate between active measurement and low-power storage to extend battery life. Its 32 MHz Cortex-M3 core is suitable for sampling control and local processing, while 256 KB Flash stores firmware and 8 KB EEPROM retains setup information. The integrated ADC and three op-amps can simplify a compact analog channel, provided the selected sampling regime stays within the ADC and amplifier limits. The MCU's low-power positioning is especially important for unattended field equipment because the duty cycle of the radio, display, or storage element can dominate total energy use. Firmware should disable unused peripherals, use the appropriate sleep and stop modes, and account for wake-up timing. Hardware validation should include brownout behavior, sensor-signal settling, capacitor selection, and measured sleep current rather than relying only on nominal catalog values.
推薦
USB Powered Test and Control Device
The STM32L152RCT6 is well matched to USB-powered test, programming, and control equipment where a single USB connection supplies both power and data. Its integrated USB controller removes a separate USB transceiver requirement, while the Cortex-M3 core runs at up to 32 MHz for control algorithms, protocol processing, and data capture. Integrated analog resources can support excitation, measurement, and output-loopback functions without requiring separate amplifiers in suitable designs. The 64-LQFP package gives the designer access to a broad GPIO set for fixture control, status indication, and programmable inputs. A robust design still needs input protection, controlled USB power-up behavior, accurate analog grounding, and firmware-managed overcurrent responses. Validate the selected USB speed and electrical requirements against the manufacturer documentation, and confirm that downstream test equipment can supply the current required during analog generation or output-driving operations.
推薦
推薦產品摘要
工程參考資料,適用於 STM32L152RCT6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32L162RCT6 | STM32L152RDT6 | STM32L152RET6 | STM32L152RBT6 | STM32L162RDT6 |
|---|---|---|---|---|---|---|
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 |
| Integrated Connectivity | USB and LCD | USB and LCD | USB and LCD | USB and LCD | USB and LCD | USB and LCD |
| Analog Resources | ADC, DAC, and 3 op-amps | ADC, DAC, and 3 op-amps | ADC, DAC, and 3 op-amps | ADC, DAC, and 3 op-amps | ADC, DAC, and 3 op-amps | ADC, DAC, and 3 op-amps |
主要差異化特點
- Integration reduces external analog and USB component count (對比STM32L162RCT6)
- Memory expansion path without changing the 64-LQFP footprint (對比STM32L152RDT6)
- Direct fit for 256 KB firmware requirements (對比STM32L152RBT6)
設計說明
Place every required supply bypass capacitor directly between the corresponding power pin and the nearest ground reference, with the shortest practical return path. Use the manufacturer pin-definition table to identify all supply, ground, analog, and USB connections. Avoid routing USB differential traces across split planes, and preserve the recommended controlled-impedance geometry. For mixed-signal designs, keep the ADC and operational-amplifier inputs away from LCD, USB, and digital clock nets.
Create the supply rail so its voltage and transient behavior satisfy every operating mode used by the STM32L152RCT6, including active, sleep, stop, and reset states. Confirm regulator headroom, capacitor voltage rating, startup sequencing, and brownout behavior against the manufacturer electrical characteristics. Do not infer permissible voltage limits from the 3.3 V logic level alone. Use the low-power-control firmware to gate unused analog blocks, USB, LCD, and peripherals rather than assuming all reset defaults minimize current consumption.
A 64-LQFP footprint match does not by itself guarantee a drop-in firmware replacement. Before using STM32L162RCT6 or another STM32L1 alternative, compare pin-by-pin alternate functions, memory mapping, clock-tree requirements, ADC channels, DAC availability, USB behavior, and low-power modes. Also verify that the alternative's Flash size meets the application binary size and that any startup code, linker script, and device-selection macro are updated for the new part number.
合規資訊
Compliance conclusions require the manufacturer declaration or product-page material for the exact orderable MPN.