產品(44,000+)

STM32L431CCT6 - 80MHz Cortex-M4 256KB | STMicroelectronics
STM32L431CCT6

STM32L431CCT6 - 80MHz Cortex-M4 256KB | STMicroelectronics

The STMicroelectronics STM32L431CCT6 is an ultra-low-power 32-bit microcontroller built around the Arm Cortex-M4 core, operating at up to 80 MHz with 256 KB of Flash memory in a 48-LQFP package measuring 7 mm by 7 mm. It combines high processing performance with a compact package and low-power-oriented design for embedded control, sensing, communications, and industrial applications. A microcontroller is a programmable system-on-chip that integrates a processor core, Flash program memory, RAM, peripherals, and interface controllers on one semiconductor device. The STM32L4 series occupies the low-power microcontroller segment of the broader embedded-processing hierarchy. STM32L431 devices use the Arm Cortex-M4 RISC core to balance computational performance, peripheral integration, and energy-efficient operation in battery-operated and always-on equipment. The STM32L431CCT6 provides a 32-bit Arm Cortex-M4 processor, an operating frequency of up to 80 MHz, and 256 KB of Flash organized as 256K by 8 bits. Its 48-LQFP package supports compact surface-mount assembly while exposing a broad mix of digital, analog, timing, and communications resources. The part is positioned for designs that require more processing capability than an 8-bit or Cortex-M0+ controller without moving to a larger performance and power class. STMicroelectronics describes the STM32L431xx family as an ultra-low-power microcontroller platform. This architecture is appropriate for applications that spend substantial time in low-energy states and need fast execution when active. The Cortex-M4 instruction set also supports efficient digital signal-processing tasks, while the integrated Flash and peripheral resources reduce the number of external components required in compact embedded systems. Typical uses include connected industrial sensors, low-power data loggers, motor and actuator controllers, compact communication equipment, and portable measurement products. The 80 MHz operating rate supports responsive control loops and communication handling, while the 256 KB Flash capacity accommodates a bootloader, application firmware, configuration data, and update routines. The 7 mm by 7 mm LQFP footprint is also suitable for boards where a very small QFN package would be difficult to assemble. When designing around the STM32L431CCT6, confirm that the PCB land pattern, pin assignment, clock strategy, power requirements, and peripheral allocation match the selected board revision. Place decoupling capacitors close to the supply pins and follow the pin-description table in the manufacturer datasheet when assigning nets. The 48-LQFP package also requires adequate solderable exposed perimeter for assembly and inspection. This product page combines the manufacturer product description, package and memory characteristics, compatible family alternatives, and practical implementation guidance. It is intended to help engineers evaluate the STM32L431CCT6 for low-power embedded designs, verify footprint compatibility, and identify the peripheral details that should be confirmed before schematic release or PCB layout.

詢價 聯絡我們
STM32L431KBU3 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L431KBU3

STM32L431KBU3 - 80MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32L431KBU3 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 processor with a floating-point unit. It operates at up to 80 MHz, provides 128 KB of Flash memory and 64 KB of SRAM, and is packaged in a 32-pin UFQFPN measuring 5 x 5 mm with an exposed pad. The MCU supports operation from 1.8 V, 2.5 V or 3.3 V, making it suitable for compact, low-energy embedded systems. An ultra-low-power microcontroller is a semiconductor device optimized to minimize energy consumption during active processing, sleep, standby and shutdown operation. The STM32L4 family belongs to the embedded microcontroller hierarchy, combining a general-purpose Arm Cortex-M4 core with low-power modes, integrated communications peripherals and energy-conscious system features. This makes it suitable for battery-operated sensors, industrial controls, connected equipment and compact consumer devices where average current consumption matters as much as processing performance. The STM32L431KBU3's key features include an 80 MHz Arm Cortex-M4 core with FPU, 128 KB of Flash and 64 KB of SRAM. Its 32-UFQFPN package measures 5 x 5 mm with a 0.55 mm pitch and includes an exposed pad. The device is identified as an industrial-temperature UFQFPN offering and is presented by STMicroelectronics as part of the STM32L4 ultra-low-power portfolio. Its compact footprint supports space-constrained boards without requiring a high-pin-count package. The Cortex-M4 architecture provides a 32-bit RISC instruction set, hardware floating-point capability and deterministic embedded-control performance. The STM32L431KBU3 combines that processing capability with 128 KB of embedded Flash for firmware and 64 KB of SRAM for working memory. STMicroelectronics positions the STM32L431xx family for applications requiring low power, security-oriented embedded control and a broad peripheral ecosystem. Firmware development can use the STM32Cube and Arm Cortex-M software environments. Typical uses include industrial sensor nodes, low-power data loggers, connected measurement equipment, compact motor-control modules and portable medical or building-automation devices. The 80 MHz core supports responsive control and communication workloads, while the low-power MCU architecture targets systems that spend substantial time in sleep or standby states. The UFQFPN format also assists designers creating small, densely populated assemblies. PCB implementation requires careful treatment of the exposed thermal pad, ground return paths and high-speed signal routing. Follow the manufacturer pinout, land-pattern and decoupling guidance when assigning power, ground, reset and signal connections. Confirm that the exposed pad is connected to the intended ground plane and that the assembled PCB meets the package's thermal requirements. This product overview combines the manufacturer specifications with package details, practical application guidance and carefully qualified replacement options. It also highlights the differences that matter when comparing same-footprint STM32L4 devices, including memory capacity, ordering suffix and device-specific functionality.

詢價 聯絡我們
STM32L431KBU6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics
STM32L431KBU6

STM32L431KBU6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics

STMicroelectronics STM32L431KBU6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with a maximum operating frequency of 80 MHz, 128 KB of Flash memory, and a 32-pin UFQFPN package measuring 5 mm by 5 mm. The device is designed for compact embedded systems that require efficient processing, low standby power, and a broad selection of serial and analog peripherals. An ultra-low-power microcontroller is a semiconductor designed to minimize energy consumption while maintaining responsive real-time processing. The STM32L4 series combines an Arm Cortex-M4 processor, embedded nonvolatile memory, analog conversion capabilities, and communication peripherals in one compact component. This places the MCU within the hierarchy of embedded microcontroller, 32-bit RISC processor, Arm Cortex-M microcontroller, and low-power embedded-control device. The STM32L431KBU6 operates up to 80 MHz and includes 128 KB of Flash memory. Its Arm Cortex-M4 core supports single-precision floating-point instructions and digital signal-processing instructions, making it suitable for control loops, sensor conditioning, and local signal processing. The 32-pin UFQFPN package supports compact PCB layouts, while the manufacturer product page identifies the device as part of the STM32L431xx family of ultra-low-power microcontrollers. The STM32L431KBU6 integrates serial communication, general-purpose input and output, timer, and analog resources intended for embedded control. These functions allow a design to combine acquisition, computation, and communication without requiring several discrete components. Its 80 MHz processing ceiling provides additional timing margin for protocol handling and control algorithms when compared with lower-frequency microcontrollers in the same broad power-conscious market. Typical uses include battery-powered environmental sensors, compact industrial monitoring equipment, low-power IoT endpoints, building controls, portable measurement instruments, and motor or actuator control nodes. The MCU is especially appropriate where frequent wake-up, efficient standby operation, local analog measurement, and serial connectivity are more important than a large package or a very high GPIO count. Designers should place decoupling capacitors directly at the supply pins, route sensitive analog inputs away from fast digital switching paths, and follow the exposed-pad and thermal-land requirements of the UFQFPN package. Firmware should use the STM32 low-power modes deliberately and verify wake-up timing, peripheral clock requirements, and analog-reference stability before production release. This product page combines the manufacturer specifications with practical implementation guidance, application-focused design context, and a parameter-by-parameter comparison with identified same-footprint alternatives. It is intended to help engineers confirm mechanical fit, memory capacity, processor requirements, and feature differences before committing an STM32L431KBU6 to a new board design.

詢價 聯絡我們
STM32L431RCI6 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L431RCI6

STM32L431RCI6 - 80MHz Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32L431RCI6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 core, operating up to 80 MHz with 256 KB of Flash memory, 64 KB of SRAM, and a 64-UFBGA 5 x 5 mm package. It combines a single-precision floating-point unit with DSP instructions and an RTC featuring a hardware calendar, alarms, and calibration. An ultra-low-power microcontroller is designed to balance responsive processing with low energy consumption during both active operation and sleep. The STM32L4 family belongs to the hierarchy microcontroller, embedded processor, 32-bit RISC processor, and power-conscious embedded controller. This makes the STM32L431RCI6 suitable for connected industrial equipment, compact sensors, portable instruments, and battery-operated products that periodically sleep between tasks. Principal features include an 80 MHz Arm Cortex-M4F processor, 256 KB of Flash, 64 KB of SRAM, a single-precision FPU, full DSP instruction support, and an RTC with hardware calendar, alarms, and calibration. The compact 64-UFBGA package has a 5 x 5 mm body size, allowing a high component density on space-constrained boards while retaining a large set of mixed-signal and communication interfaces. The Cortex-M4F architecture supports efficient single-precision floating-point calculations and DSP operations commonly needed in sensor conditioning, digital filtering, and control algorithms. Its Harvard-style instruction flow and integrated debug support simplify firmware development, while the STM32L4 family's low-power operating modes can help reduce average system energy use in duty-cycled designs. Typical applications include connected industrial sensors, compact environmental monitors, low-power data loggers, portable measurement equipment, and embedded control modules. The device is also suitable for designs that process locally acquired sensor data, maintain time and calendar information, and communicate through serial peripherals such as UART, SPI, or I2C. PCB design should follow the manufacturer's land pattern and provide appropriate high-frequency decoupling near the supply pins. Because the 64-UFBGA footprint is compact, assembly inspection and solder-joint reliability require careful process control. Firmware should also validate low-power transitions, RTC behavior, and peripheral clock configuration during bring-up. This product page combines the manufacturer's core device characteristics, procurement structure, and practical design considerations into an engineering-focused reference. It also highlights the limits of drop-in sourcing: no distinct pin-compatible alternatives are presented unless their package, pinout, memory configuration, and electrical requirements can be verified rather than inferred from a family name.

詢價 聯絡我們
STM32L431RCT6 - Ultra-Low-Power Cortex-M4 MCU 80MHz 256KB Flash | STMicroelectronics
STM32L431RCT6

STM32L431RCT6 - Ultra-Low-Power Cortex-M4 MCU 80MHz 256KB Flash | STMicroelectronics

The STM32L431RCT6 is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the high-performance Arm® Cortex®-M4 32-bit RISC core with floating-point unit (FPU). It operates at a frequency of up to 80 MHz and provides 256 KB of Flash memory and 64 KB of SRAM, making it suitable for a wide range of energy-efficient embedded applications. The device is housed in a 64-pin LQFP package (10x10 mm) and is part of the STM32L4 series, which is designed for low-power operation without compromising performance. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The STM32L431RCT6 belongs to the STM32L4 family, which is part of the broader STM32 portfolio of 32-bit microcontrollers. These MCUs are widely used in industrial, consumer, and IoT applications where power efficiency and processing capability are critical. The Cortex-M4 core with FPU enables efficient digital signal processing and floating-point arithmetic, making it ideal for applications such as motor control, sensor fusion, and audio processing. Key features of the STM32L431RCT6 include its ultra-low-power modes, which allow it to achieve very low power consumption in standby and sleep modes, extending battery life in portable devices. It also integrates a rich set of peripherals, including multiple USARTs, SPIs, I2Cs, ADCs, DACs, timers, and a real-time clock. The device supports a wide operating voltage range of 1.71V to 3.6V, making it compatible with standard battery chemistries. Additionally, it features a 12-bit ADC with up to 16 channels, a 12-bit DAC, and an operational amplifier, enabling analog signal processing without external components. From a technical perspective, the STM32L431RCT6 leverages ST's advanced 90nm process technology, which contributes to its low power consumption and high performance. The core runs at up to 80 MHz, delivering 100 DMIPS (Dhrystone 2.1) performance. The device includes a memory protection unit (MPU) and a nested vectored interrupt controller (NVIC) for efficient interrupt handling. It also supports a wide range of communication interfaces, including USB 2.0 full-speed, CAN 2.0B, and SAI (serial audio interface), making it versatile for connectivity applications. Typical applications for the STM32L431RCT6 include industrial sensors, smart meters, portable medical devices, and IoT nodes. Its low-power characteristics make it particularly well-suited for battery-powered devices that require long operational lifetimes. The device also supports a variety of development tools, including STM32CubeIDE, STM32CubeMX, and the STM32CubeL4 firmware package, which simplifies software development and reduces time-to-market. When designing with the STM32L431RCT6, it is important to consider the power supply decoupling and PCB layout to ensure stable operation. The device requires a 100nF capacitor on each power pin and a 4.7uF capacitor on the main supply. Additionally, the VDDA pin should be connected to a clean analog supply to minimize noise in analog peripherals. Proper grounding and layout are essential to achieve the specified performance and low-power operation.

USD $8.59 聯絡我們
STM32L431VCI6 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L431VCI6

STM32L431VCI6 - 80MHz Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32L431VCI6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 RISC core, operating at up to 80 MHz and containing 256 KB of Flash memory. The device is offered in a 100-pin UFBGA package measuring 7 x 7 mm. Its Cortex-M4F core includes a single-precision floating-point unit and DSP instructions for efficient arithmetic and signal-processing workloads. An ultra-low-power microcontroller is an embedded processing component designed to balance computational capability with energy efficiency. Within the device hierarchy, the STM32L431VCI6 is a 32-bit microcontroller built around the Arm Cortex-M4 processor core. It belongs to STMicroelectronics' STM32L4 family and supports applications in which compact size, low-power operation, mixed-signal control, communications, and real-time processing are important. Core features include an operating frequency of up to 80 MHz, 256 KB of Flash, single-precision floating-point hardware, and DSP instruction support. The 100-UFBGA package provides a compact surface-mount solution for space-constrained embedded products. Operating voltage selections shown for this exact device include 1.8 V, 2.5 V, and 3.3 V, allowing integration with common low-voltage embedded systems. The manufacturer identifies the device as an ultra-low-power Arm Cortex-M4 MCU. The Cortex-M4 architecture combines a 32-bit RISC instruction set with an efficient exception-based operating model and hardware features suited to control workloads. The floating-point unit accelerates single-precision operations without requiring software emulation, while DSP instructions support common filtering and signal-processing calculations. These capabilities make the MCU suitable for connected sensors, industrial controls, medical instruments, and low-power embedded products requiring more performance than a basic Cortex-M0-class device. Typical applications include low-power sensor nodes, industrial monitoring equipment, compact data loggers, connected measurement instruments, and embedded control systems. The 256 KB Flash capacity provides room for application firmware and configuration data, while the 7 x 7 mm UFBGA package helps reduce board footprint. Confirm peripheral assignments, clock configuration, and power-supply requirements against the manufacturer datasheet before finalizing a PCB layout. For PCB implementation, use the manufacturer land pattern for the 100-UFBGA package and preserve the documented pin, power, ground, decoupling, and programming connections. Because this package has a fine ball pitch and 100 terminals, inspect the assembled board for solder bridges and verify continuity on every power rail. Match external crystal, reset, and boot circuitry to the device reference configuration rather than relying on another STM32 footprint. This page combines the manufacturer product information with practical implementation guidance, focused comparisons, and verified source links. It also distinguishes the exact STM32L431VCI6 configuration from related STM32L431 family variants so engineers can assess memory capacity, package, and qualification requirements before selecting a replacement.

詢價 聯絡我們
STM32L431VCT6 - 80MHz Cortex-M4F MCU | STMicroelectronics
STM32L431VCT6

STM32L431VCT6 - 80MHz Cortex-M4F MCU | STMicroelectronics

STMicroelectronics STM32L431VCT6 is an ultra-low-power 32-bit microcontroller built around an Arm Cortex-M4 processor with single-precision floating-point unit, operating up to 80 MHz. The device provides 256 KB of Flash memory and is supplied in a 100-pin LQFP package measuring 14 mm by 14 mm. An ultra-low-power microcontroller is an embedded processing device designed to balance computational performance with low energy consumption. The STM32L431VC family belongs to the STM32L4 series and combines an Arm Cortex-M4 RISC core, embedded Flash, SRAM, analog resources, timers, and communication peripherals within one integrated circuit. This hierarchy places the MCU above the Cortex-M4 processor core and below the broader embedded semiconductor and industrial-control device categories. The STM32L431VCT6 operates as a 32-bit Arm Cortex-M4 MCU with a maximum frequency of 80 MHz. Its Cortex-M4 core includes a single-precision FPU capable of executing single-precision floating-point instructions, while the processor also supports a full set of DSP instructions. The 256 KB Flash configuration provides dedicated program storage, while the 64 KB SRAM value reported for the device supports working memory for control loops, communications, and peripheral data handling. The 100-pin LQFP package exposes substantially more I/O than smaller 32-pin or 64-pin microcontroller packages, allowing integration of multiple analog inputs, timers, serial interfaces, and external-memory connections on one device. Its 14 mm by 14 mm leaded package is also suitable for automated assembly and inspection processes. The operating temperature grade encoded by the T6 suffix and the complete ordering-code details should be confirmed against the manufacturer ordering information before production release. Typical uses include industrial sensor nodes, compact industrial controllers, connected measurement equipment, building-automation controllers, battery-powered condition-monitoring systems, and low-power embedded gateways. The Cortex-M4F processing capability is particularly useful when the control application must process sampled analog values or implement digital signal-processing routines without using a higher-power application processor. PCB planning should begin with the manufacturer's 100-pin package drawing and land pattern. Place decoupling capacitors close to the supply and ground pins, preserve the recommended clock and debug connections, and route sensitive analog inputs away from fast-switching nodes. Firmware, peripheral configuration, pin multiplexing, and low-power behavior should be validated against the STM32L431xx datasheet rather than inferred solely from the order code. This product record combines the verified 80 MHz operating frequency, Cortex-M4F architecture, 256 KB Flash capacity, 64 KB SRAM, and 100-pin LQFP construction with practical design guidance. It also distinguishes verified characteristics from parameters that require direct confirmation in the manufacturer datasheet, helping engineers assess fit before layout, sourcing, and firmware development begin.

詢價 聯絡我們
STM32L432KCU3 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L432KCU3

STM32L432KCU3 - 80MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32L432KCU3 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with FPU, operating up to 80 MHz and delivering up to 100 DMIPS. It integrates 256 KB of Flash memory and 64 KB of SRAM, supports USB full-speed, analog, and audio functions, and is packaged in a 32-pin UFQFPN measuring 5 mm by 5 mm. An ultra-low-power microcontroller is a compact embedded processing device designed to balance real-time computation with constrained energy use. The STM32L4 family combines a Cortex-M4 processor, embedded memory, analog conversion, connectivity, and low-power peripherals within a single system-on-chip. Its position in the hierarchy is microcontroller, embedded processor, Arm Cortex-M microcontroller, and finally semiconductor, making it suitable for compact control systems that require more performance than a basic low-power MCU. Key features include an 80 MHz Cortex-M4 core, 256 KB of Flash, 64 KB of SRAM, a floating-point unit, USB full-speed support, and analog and audio capabilities. The processor can execute up to 100 DMIPS, making it suitable for responsive control loops, communications, data acquisition, and compact user-interface logic. Its 32-pin UFQFPN package also supports space-constrained board layouts requiring numerous mixed-signal and peripheral connections. The Arm Cortex-M4 architecture provides a 32-bit RISC instruction set with hardware floating-point support, reducing the software burden for common control and signal-processing calculations. USB full-speed connectivity permits direct peripheral interfacing, while the integrated analog, audio, and low-power features reduce the need for separate components in embedded designs. Designers should still verify the exact peripheral allocation, clock configuration, and operating limits for each board design against the manufacturer datasheet. Typical applications include USB-connected data loggers, compact industrial condition-monitoring nodes, low-power audio-control systems, sensor-hub controllers, and wearable or portable measurement equipment. In each case, the combination of 256 KB Flash, 64 KB SRAM, USB full-speed, and an 80 MHz processing core supports moderate firmware complexity while retaining a small 5 mm by 5 mm footprint. The primary design consideration is complete pin and peripheral validation before layout. Confirm USB routing requirements, decoupling, exposed-pad thermal management, oscillator connections, and all required alternate-function assignments in the manufacturer pin-description table. Preserve the exposed-pad land pattern and follow the package land-pattern guidance when creating the PCB footprint. This product page consolidates core specifications, same-family drop-in candidates, application guidance, package considerations, and design notes. It helps engineers compare memory, core frequency, interface capability, and footprint while completing an STM32L432KCU3 datasheet, pinout, replacement, and sourcing review.

詢價 聯絡我們
STM32L432KCU6 - 80MHz Cortex-M4 MCU 256KB Flash | STMicroelectronics
STM32L432KCU6

STM32L432KCU6 - 80MHz Cortex-M4 MCU 256KB Flash | STMicroelectronics

The STMicroelectronics STM32L432KCU6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 core with FPU and DSP instructions, operating at up to 80 MHz, with 256 KB of Flash memory and 64 KB of SRAM, housed in a 32-pin UFQFPN (5x5 mm) package. An Arm Cortex-M4 microcontroller is a 32-bit RISC processor that integrates a floating-point unit (FPU), single-cycle DSP multiply-accumulate instructions, and a memory protection unit (MPU), positioning it in the hierarchy: Cortex-M4 MCU -> 32-bit microcontroller -> embedded processor -> semiconductor. Microcontrollers of this class combine CPU, memory, and peripherals on a single die, making them the default choice for compact, energy-conscious embedded systems. Key differentiating features include industry-leading low-power modes: 100 nA in Shutdown mode, 3.4 uA in Stop 2 with RTC running, and a Low-power run mode down to 1.71V supply. The device integrates a 12-bit ADC with hardware oversampling (up to 5.33 Msps), a 12-bit DAC, two op-amps, comparators, and a true random number generator (TRNG), providing a complete analog signal chain on chip. Technically, the STM32L432KCU6 uses STMicroelectronics' ultra-low-power process technology with the ART Accelerator enabling zero-wait-state execution from Flash, sustaining 100 DMIPS and 273 CoreMark at 80 MHz. Flexible clocking includes a multi-speed internal oscillator (MSI) from 100 kHz to 48 MHz, plus 4 MHz HSI, 32 kHz LSE and an external oscillator option. Communication interfaces include USB 2.0 full-speed device, three USARTs, one UART, two SPI, and two I2C. Typical applications include battery-powered IoT sensor nodes, wearable health devices, and portable medical instrumentation, where the combination of 3.4 uA Stop 2 current and integrated analog peripherals directly extends battery life and reduces BOM count. Design consideration: exploit the MSI oscillator calibrated against the LSE to eliminate the external crystal in UART or USB-light designs, saving board area and cost; place 100 nF decoupling capacitors at each VDD/VDDA pin per ST layout guidance. This page synthesizes distributor pricing, pin-compatible alternatives, design notes, and FAQ content not found in the manufacturer datasheet, verified as of 2026-09-06.

詢價 聯絡我們
STM32L433CCT3 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L433CCT3

STM32L433CCT3 - 80MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32L433CCT3 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 processor, operating at up to 80 MHz with 256 KB of Flash memory and 64 KB of SRAM. It is packaged in a 48-LQFP 7 x 7 mm package and operates from a 1.71 V to 3.6 V supply. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The STM32L433 belongs to the STM32L4 series of low-power microcontrollers. This product type sits within the hierarchy of embedded processor, microcontroller, 32-bit MCU, and power-managed semiconductor, providing more computation than an 8-bit MCU while supporting efficient low-power operation. Principal features include a 32-bit Cortex-M4 core with floating-point unit, up to 100 DMIPS, USB full-speed support, LCD controller capability, and an external switched-mode power supply option. The device also includes backup-domain features suited to low-power products: the manufacturer lists 200 nA consumption in VBAT mode for the real-time clock and 32 backup registers of 32 bits each. Its memory configuration provides 256 Kbytes of Flash for firmware and 64 KB of SRAM for working data. The STM32L433CC family combines conventional embedded-control capability with energy-conscious modes and integrated connectivity. USB full-speed and LCD support make the device useful for compact human-interface products, while the Cortex-M4 floating-point unit accelerates control algorithms, filtering, and general signal-processing tasks. The 1.71 V minimum operating voltage also permits designs powered from a single Li-ion cell with an appropriate regulator. Typical applications include low-power sensor nodes, industrial condition-monitoring equipment, compact medical-control modules, USB-connected data loggers, energy meters, and LCD-equipped handheld products. In each case, the MCU can execute real-time control functions while retaining USB connectivity and multiple low-power operating states to extend battery life. A principal design consideration is validating the exact peripheral assignment, boot configuration, and pin multiplexing for the assembled PCB. Use the manufacturer pin-description table when assigning alternate functions and confirm the selected regulator meets both the 1.71 V to 3.6 V operating range and peripheral-specific supply requirements. This product overview combines the STM32L433CC family architecture, package information, low-power characteristics, and replacement analysis to support early design decisions. For an exact PCB replacement, verify pin functions, boot settings, firmware device configuration, temperature grade, and package orientation against the manufacturer datasheet.

詢價 聯絡我們
STM32L433CCT6 - 80MHz Cortex-M4 256KB Flash | STMicroelectronics
STM32L433CCT6

STM32L433CCT6 - 80MHz Cortex-M4 256KB Flash | STMicroelectronics

The STMicroelectronics STM32L433CCT6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with an FPU, operating at up to 80 MHz and delivering up to 100 DMIPS. It provides up to 256 KB of embedded Flash memory and 64 KB of SRAM, with USB full-speed, LCD, and external SMPS support. The device is packaged in a 48-LQFP package measuring 7 mm by 7 mm. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32L433xx family belongs to the STM32L4 ultra-low-power line and combines Cortex-M4 real-time processing with energy-conscious operation for embedded control, sensor, communication, and human-interface applications. Its Arm Cortex-M4 architecture provides a 32-bit RISC instruction set, while the integrated floating-point unit supports efficient control and signal-processing calculations. The headline features of the STM32L433CCT6 are its 80 MHz maximum operating frequency, 100 DMIPS processing capability, 256 KB Flash memory, and 64 KB SRAM. USB full-speed connectivity enables USB peripherals and host or device communication, while LCD support simplifies connected displays. External SMPS support is useful in designs where the MCU controls a dedicated switched-capacitor or switching-mode power-supply stage. The STM32L433xx architecture is designed for low-power embedded systems while retaining a high-performance Cortex-M4 core and integrated floating-point hardware. The 256 KB Flash capacity is suitable for firmware, boot code, configuration data, and application logic, while 64 KB SRAM supports working memory, buffers, stacks, and peripheral data movement. The combination of USB, LCD, and external SMPS support reduces the number of separate components needed in compact embedded platforms. Typical applications include USB-connected sensor nodes, industrial control and monitoring equipment, compact human-interface panels, connected measurement instruments, and low-power embedded gateways. The LCD and USB features make the device useful in devices that need local display feedback and USB connectivity, while the Cortex-M4 FPU is appropriate for real-time control and floating-point signal processing. When designing around the STM32L433CCT6, check the device-specific pin assignments, power-supply requirements, clock configuration, decoupling recommendations, and exposed-pad connection in the manufacturer datasheet. The 7 mm by 7 mm LQFP footprint supports conventional PCB assembly, but signal integrity and thermal performance still depend on the surrounding layout and power-delivery network.

詢價 聯絡我們
STM32L433CCU3 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L433CCU3

STM32L433CCU3 - 80MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32L433CCU3 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with a single-precision FPU, operating up to 80 MHz and delivering up to 100 DMIPS. It provides 256 KB of embedded Flash, 64 KB of SRAM, USB full-speed connectivity, an LCD controller, and an external switched-mode power supply in a 48-pin UFQFPN package measuring 7 x 7 mm. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface logic into one compact device. The STM32L433 belongs to the STM32L4 family of 32-bit RISC microcontrollers, where its Cortex-M4 core combines efficient control processing with floating-point and DSP instruction support. This hierarchy places the device between general-purpose embedded processors and highly integrated application-specific controllers. Principal features include 256 KB of Flash for firmware and data, 64 KB of SRAM for working memory, an Arm Cortex-M4 FPU, 100 DMIPS processing performance, and a maximum clock frequency of 80 MHz. USB full-speed support enables USB connectivity, while the integrated LCD controller serves compact human-interface designs. The external SMPS capability can support efficient power management in low-power embedded systems. The STM32L433 architecture is suited to connected control systems where processing performance, memory capacity, and low-power operation must coexist within a small package. Its Cortex-M4 core executes single-precision floating-point and DSP instructions, while the STM32L4 family peripherals consolidate communication, timing, analog, and debug functions around the processor. The 48-pin UFQFPN package supports compact board layouts without using a large leaded package. Typical applications include USB-connected data acquisition, compact industrial control modules, low-power sensor gateways, human-interface panels with an LCD, secure or connected embedded controllers, and portable measurement equipment. The combination of 80 MHz processing and 256 KB Flash is especially useful for protocol handling, local data processing, and firmware-intensive control tasks. Designers should confirm the pin configuration, supported voltage combinations, clock setup, and peripheral assignment against the manufacturer datasheet before schematic capture. PCB planning must preserve access to the exposed pad, programming and debug interfaces, and all power pins. Firmware should also use the STM32CubeMX or STM32CubeIDE device configuration tools when creating clock trees and peripheral initialization sequences. This page combines the manufacturer specifications, package and memory details, practical application guidance, drop-in alternatives, and design considerations needed to evaluate the STM32L433CCU3 for a new embedded product. It also highlights where a different STM32L4 member may be preferable when memory size, qualification, or extended features differ.

詢價 聯絡我們
STM32L433CCU6 - 80MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics
STM32L433CCU6

STM32L433CCU6 - 80MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics

The STMicroelectronics STM32L433CCU6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with FPU, operating up to 80 MHz and delivering 100 DMIPS, with 256 KB of Flash memory, 64 KB of SRAM, USB full-speed, LCD support, and an external switched-mode power-supply controller in a 48-pin UFQFPN package measuring 7 x 7 mm. The STM32L433xx family combines performance-oriented embedded processing with energy-conscious operation for embedded, industrial, and connected products. An ultra-low-power microcontroller is an embedded processing component designed to retain useful computing capability while minimizing energy consumption during active, standby, sleep, and backup modes. The STM32L4 series belongs to the microcontroller hierarchy, combining an Arm Cortex-M processor core, embedded nonvolatile Flash, SRAM, communication peripherals, and low-power clock and power-management functions in one device. This integration allows a compact embedded system to replace separate processor, memory, and interface components while supporting battery-powered operation. Key features include a 1.71 V to 3.6 V supply range, 256 KB of Flash, 64 KB of SRAM, an Arm Cortex-M4 processor with single-precision floating-point capability, USB full-speed connectivity, and an LCD controller. The family also supports operating temperatures from -40 °C to 85 °C, 105 °C, or 125 °C, depending on the exact orderable variant. In backup mode, the RTC and 32 x 32-bit backup registers can be supplied from VBAT at 200 nA. The Cortex-M4 architecture provides a 32-bit instruction set with hardware floating-point instructions and up to 100 DMIPS of performance. This performance supports responsive control logic and moderate digital signal-processing workloads while retaining the power-management options expected from an STM32L4 device. Flexible memory and peripherals make the MCU applicable to industrial controllers, human-interface systems, compact data loggers, and USB-connected equipment. Typical applications include low-power industrial sensing equipment, connected measurement instruments, compact user-interface controllers, USB peripheral devices, and embedded systems that require an LCD controller or an external SMPS power rail. The 256 KB Flash capacity provides room for a bootloader, application firmware, configuration data, and update routines, while 64 KB of SRAM supports working buffers and real-time control logic. Designers should plan the PCB for a 48-pin UFQFPN footprint, provide the decoupling and exposed-pad connections specified by the manufacturer datasheet, and confirm the external SMPS configuration before committing to the power architecture. Program development and peripheral configuration should also be checked against the STM32CubeMX and STM32CubeIDE device support selected for this part. This page combines device specifications, application guidance, same-family replacement analysis, and practical design considerations to accelerate MCU selection and board development.

詢價 聯絡我們
STM32L433RBT6 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L433RBT6

STM32L433RBT6 - 80MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32L433RBT6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 processor, operating up to 80 MHz and delivering up to 100 DMIPS. The device provides 128 KB of Flash memory, 64 KB of SRAM, USB full-speed support, an LCD controller, and an external switching-mode power supply in a 64-LQFP 10 mm × 10 mm package. An ultra-low-power microcontroller is a semiconductor designed to maintain processing performance while minimizing energy consumption during active, sleep, stop, and backup operation. The STM32L433 belongs to the STM32L4 product family, combining an Arm Cortex-M4 real-time core with analog, communications, security, and low-power peripherals. This places it within the hierarchy of microcontroller, embedded processor, and power-efficient semiconductor devices. The STM32L433RBT6 runs from a 1.71 V to 3.6 V supply and supports temperature ranges extending from -40 °C to 85 °C, 105 °C, or 125 °C depending on the ordered device variant. Its FlexPowerControl architecture includes a 200 nA VBAT mode for the real-time clock and 32 × 32-bit backup registers. The integrated USB full-speed interface supports data-oriented devices, while the LCD controller and external SMPS capability are useful for compact, low-energy instruments. The Cortex-M4 core uses a 32-bit RISC architecture and includes single-precision floating-point hardware. At 80 MHz, the processor provides substantially more arithmetic throughput than lower-frequency Cortex-M devices while retaining the deterministic interrupt-driven behavior expected in embedded control systems. Its 128 KB Flash memory is organized as 128K × 8 bits, and the family supports up to 64 KB of SRAM. Typical uses include low-power sensor hubs, industrial data loggers, USB-connected instruments, compact medical monitors, security and access-control terminals, and battery-operated IoT equipment. USB full-speed connectivity is especially useful for configuration, firmware updates, and data exchange, while the LCD controller can reduce external display-controller overhead in human-interface designs. Board design should preserve the low-power potential of the MCU by following the manufacturer’s decoupling, clock, reset, and low-power guidance. Avoid unnecessary always-on peripherals, verify the startup current path, and use a supply capable of supporting the selected operating mode without excessive voltage ripple. The 64-LQFP package also requires adequate escape routing for its dense pin arrangement. This page combines package, memory, interface, application, and comparison guidance for engineers evaluating the STM32L433RBT6. It also identifies same-package alternatives for design flexibility while emphasizing that MCU substitutions must be checked for peripheral mapping, boot configuration, firmware support, and electrical compatibility.

詢價 聯絡我們
STM32L433RCI3 - 80MHz Cortex-M4F 256KB Flash 64KB SRAM | STMicroelectronics
STM32L433RCI3

STM32L433RCI3 - 80MHz Cortex-M4F 256KB Flash 64KB SRAM | STMicroelectronics

The STMicroelectronics STM32L433RCI3 is an ultra-low-power Arm Cortex-M4 microcontroller with FPU running at up to 80 MHz, integrating 256 KB of Flash, 64 KB of SRAM, a USB Full-Speed device controller and an LCD controller in a 64-pin UFBGA (5x5 mm) package. It operates from 1.71 V to 3.6 V supply rails, covering 1.8 V, 2.5 V and 3.3 V systems, and is specified over the -40 C to +85 C industrial temperature range. An ultra-low-power microcontroller is a type of embedded processor optimized for battery-operated and energy-harvesting systems. The STM32L4 family belongs to the hierarchy microcontroller -> embedded processor -> semiconductor, and adds ST's ultra-low-power design on top of the standard Arm Cortex-M4 core, enabling microamp-class standby current alongside 100 DMIPS of compute throughput. Key features of the STM32L433RCI3 include 100 DMIPS performance at 80 MHz, 256 KB of Flash memory for firmware, and 64 KB of SRAM for working data and DMA buffers. The device includes a 12-bit ADC, comparators, a programmable timer array, real-time clock, and a flexible power-management architecture with an optional internal SMPS for analog rails. Multiple low-power modes (Stop, Standby, and Shutdown) support designs that must survive long idle periods on coin cells or energy-harvesting sources. Technically, the part combines an Arm Cortex-M4F core (single precision FPU) with a 1.71 V minimum operating voltage for direct 1.8 V battery operation, low-power flash and SRAM retention options, and a peripheral set optimized for sensor-hub and metering designs. The integrated USB FS device and LCD controller reduce the external component count on connected HMI products, while the analog peripherals support direct sensor interfacing without external signal conditioning. Typical applications include Bluetooth and Zigbee sensor-hub modules, connected industrial sensors, low-power data loggers, portable medical and wellness devices, smart meters, compact HMI panels with LCD, and USB-connected battery-powered instrumentation. Each of these designs benefits from the combination of 256 KB Flash, hardware FPU, and deep sleep current in the microamp range. The key design consideration for this part is supply rail planning: the analog and digital sections share a 1.71 V to 3.6 V range, so decoupling and layout must respect the recommended input and output capacitor networks, and any LCD or USB termination must be sized for the 1.8 V minimum rail. Use the pin description table in the STMicroelectronics datasheet when assigning PCB tracks and keep high-current USB and LCD paths away from the ADC inputs. This page combines manufacturer specifications with package-level guidance, drop-in same-family alternatives, and practical design notes covering power, layout and low-power design that are not covered by the raw datasheet parameter tables.

詢價 聯絡我們
STM32L433RCI6 - 80MHz Cortex-M4 256KB MCU | STMicroelectronics
STM32L433RCI6

STM32L433RCI6 - 80MHz Cortex-M4 256KB MCU | STMicroelectronics

The STMicroelectronics STM32L433RCI6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with an integrated floating-point unit, operating up to 80 MHz with 256 KB of Flash memory and 64 KB of SRAM in a 64-pin UFBGA package measuring 5 mm by 5 mm. It supports a 1.71 V to 3.6 V power supply and combines a 100-DMIPS-class Cortex-M4 core with USB full-speed, LCD, and external switched-mode power-supply capabilities. An ultra-low-power microcontroller is a semiconductor designed to perform control, measurement, and communication tasks while minimizing energy consumption. The STM32L4 family belongs to the Arm Cortex-M4 microcontroller, embedded-processor, and power-management semiconductor hierarchy. Its low-power operating modes are useful in battery-powered equipment where the difference between active processing and standby current can determine how long a product operates between service intervals. Key features of the STM32L433RCI6 include its 80 MHz maximum core frequency, 256 KB of embedded Flash, 64 KB of SRAM, Arm Cortex-M4 instruction set, and hardware floating-point unit. The device also provides USB full-speed connectivity and LCD support. According to the manufacturer datasheet, its operating-temperature options extend from -40 °C to 85 °C, 105 °C, or 125 °C, depending on the selected device variant. A 200 nA VBAT mode supports the real-time clock and 32 by 32-bit backup registers. The STM32L4 architecture combines several low-power modes with peripheral activity management, allowing unused peripherals and clock domains to remain inactive. Its 1.71 V to 3.6 V operating range supports low-voltage battery systems and regulated industrial rails. The external SMPS option can support a more efficient multi-rail implementation when the board topology and firmware configuration permit it. The USB full-speed interface is particularly relevant to portable instruments, accessories, and data-logging equipment. Typical applications include low-power USB data loggers, compact sensor-hub controllers, industrial monitoring equipment, medical-device interface modules, connected accessories, and battery-powered test instruments. The combination of 80 MHz processing performance, 256 KB Flash, and 64 KB SRAM is suitable for moderate control workloads that require several communication interfaces or local data buffering without moving to a higher-density microcontroller. Designers should verify pin multiplexing, package-specific functions, decoupling, clock configuration, and boot requirements against the manufacturer datasheet and reference manual. Confirm the exact USB and LCD peripheral instance mappings before assigning board signals, and validate the power budget across run, stop, standby, and VBAT backup modes for the intended battery life. This product page combines manufacturer specifications, package details, application guidance, comparison parameters, and practical design notes to support faster component selection. It also identifies same-package replacement candidates and highlights the firmware, pin-mapping, and power-mode checks required before approving any substitute.

詢價 聯絡我們
STM32L433RCT3 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L433RCT3

STM32L433RCT3 - 80MHz Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32L433RCT3 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with FPU, operating at up to 80 MHz. The device provides 256 KB of embedded Flash memory, 64 KB of SRAM, USB full-speed connectivity, LCD controller support, and an external switched-mode power supply capability. It is packaged in a 64-pin LQFP measuring 10 mm by 10 mm. An ultra-low-power microcontroller is an embedded controller designed to balance processing performance, active current, and sleep-state consumption. The STM32L4 product family combines an Arm Cortex-M4 core with energy-saving modes, analog peripherals, and connectivity interfaces. This makes the STM32L433RC family suitable for compact embedded products that need more processing capability than a basic low-cost microcontroller while retaining strict energy budgets. The STM32L433RCT3 supports operation at up to 80 MHz and includes 100 DMIPS-class processing performance according to the manufacturer datasheet. Its 256 KB Flash memory provides room for application code and firmware, while 64 KB of SRAM supports working data, protocol stacks, and peripheral buffers. Integrated USB full-speed, LCD, and external SMPS functions reduce the number of external components required in connected or display-oriented products. The STM32L433RC family uses the Arm Cortex-M4 processor with a floating-point unit. This architecture supports efficient digital signal processing and control calculations without requiring a separate DSP. Peripheral integration includes an LCD interface, USB full-speed interface, and external SMPS option, while the ultra-low-power design is intended for applications where standby and low-power operating modes are important. Typical uses include low-power sensor controllers, compact human-interface devices, USB-connected embedded equipment, industrial monitoring modules, and battery-operated products. The 256 KB Flash configuration is appropriate for moderate networking protocols, control firmware, user interfaces, and data acquisition functions. Developers should select external flash only when the application exceeds both the internal program-memory and SRAM budgets. PCB implementation requires careful attention to the 64-pin LQFP land pattern, power and ground distribution, decoupling, and exposed signal routing. Follow the manufacturer pin descriptions and recommended layout guidance when assigning tracks. Firmware should use the STM32CubeMX-supported device configuration and the clock, flash, and low-power settings documented for the STM32L433RC family. This product page consolidates the core memory, processor, package, interface, and lifecycle facts with application guidance, package considerations, and engineering selection criteria. It is designed to help engineers determine whether the STM32L433RCT3 provides the required compute density, memory, connectivity, and low-power characteristics before beginning PCB and firmware development.

詢價 聯絡我們
STM32L433RCT6 - Ultra-Low-Power ARM Cortex-M4 MCU | STMicroelectronics
STM32L433RCT6

STM32L433RCT6 - Ultra-Low-Power ARM Cortex-M4 MCU | STMicroelectronics

The STM32L433RCT6 is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M4 core with FPU. It operates at a maximum frequency of 80 MHz and provides 256 KB of flash memory and 64 KB of SRAM. The device is housed in a 64-pin LQFP package (LQFP64) and is designed for a wide range of battery-powered and energy-efficient applications. What is an ARM Cortex-M4 microcontroller? It is a 32-bit processor core designed for embedded systems, offering a balance of performance, power efficiency, and rich peripheral integration. The Cortex-M4 includes a floating-point unit (FPU) and DSP instructions, making it suitable for signal processing and control applications. In the system hierarchy, a microcontroller (MCU) integrates a processor core, memory, and programmable peripherals on a single chip, enabling standalone operation in embedded designs. Key features of the STM32L433RCT6 include an ultra-low-power mode with current consumption as low as 100 nA in standby mode, a 12-bit ADC with hardware oversampling, a 12-bit DAC, multiple communication interfaces (USART, SPI, I2C, USB), and a real-time clock (RTC). The device also integrates a flexible power management unit with multiple low-power modes, including Sleep, Low-power Run, and Stop modes, allowing designers to optimize energy consumption for their specific application. Technically, the STM32L433RCT6 is built on ST's advanced 40 nm process technology, which contributes to its low power consumption. The Cortex-M4 core with FPU accelerates mathematical computations, while the ART Accelerator enables zero-wait-state execution from flash memory, improving overall system performance. The device supports a wide operating voltage range from 1.71 V to 3.6 V, making it compatible with standard battery chemistries. Typical applications include smart meters, wearable devices, medical monitoring equipment, industrial sensors, and IoT nodes. Its ultra-low-power features make it ideal for battery-powered devices that require long operational lifetimes, such as wireless sensor networks and portable health monitors. When designing with this MCU, careful attention should be paid to power supply decoupling and PCB layout to minimize noise and ensure reliable operation. The device's multiple low-power modes require proper configuration of wake-up sources and clock sources to achieve optimal energy savings.

詢價 聯絡我們
STM32L433VCT3 - 80MHz Cortex-M4 256KB MCU | STMicroelectronics
STM32L433VCT3

STM32L433VCT3 - 80MHz Cortex-M4 256KB MCU | STMicroelectronics

STMicroelectronics STM32L433VCT3 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with integrated FPU, operating at up to 80 MHz and delivering 100 DMIPS in a 100-lead LQFP package. It provides 256 KB of embedded Flash memory, 64 KB of SRAM, USB full-speed connectivity, an LCD controller, and support for an external switched-mode power supply. The STM32L433VC family combines low-power operation with the processing capability needed for compact control, sensing, communication, and human-interface applications. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one package. In the system hierarchy, the STM32L433VCT3 belongs to the Arm Cortex-M4 class of 32-bit embedded microcontrollers within the broader MCU and embedded-processing market. Its FPU accelerates floating-point calculations in control loops and signal-processing routines, while its USB and display interfaces reduce the need for separate peripheral devices. Key features include an Arm Cortex-M4 core operating up to 80 MHz, 100 DMIPS performance, 256 KB of Flash, 64 KB of SRAM, and a 100-pin LQFP package. The USB full-speed interface supports direct peripheral connectivity, while the LCD controller is useful for segment or graphical display systems. Low-power modes and external SMPS support are central to the family’s suitability for battery-powered and energy-conscious equipment. The STM32L433VC architecture combines a high-performance Cortex-M4 core with peripherals intended for low-power embedded control. Its 100-pin package exposes more I/O and interface options than smaller STM32L4 variants, allowing designers to integrate USB, display control, communications, and multiple sensors without changing the footprint. The product family supports 256 KB of Flash for firmware and boot code, with 64 KB of SRAM available for application data and working memory. Typical uses include industrial sensor controllers, USB-connected data-acquisition equipment, compact medical or laboratory instruments, display-oriented human-interface modules, wearable accessories, and low-power embedded gateways. The LCD controller and USB interface are especially useful when a product requires local visual feedback and direct computer connectivity while maintaining a small board area. PCB design should preserve the LQFP-100 footprint and route decoupling and power-supply connections according to the manufacturer’s pin and layout guidance. USB routing requires controlled impedance and a correctly designed connector and protection network. Firmware selection should use STM32CubeMX or STM32CubeIDE to configure clocks, memory, USB, GPIO, and low-power behavior, and every exposed signal should be checked against the final pin-assignment plan. This product overview combines the manufacturer’s MCU specifications with practical guidance for package reuse, power management, firmware setup, and qualification of candidate replacements. It also distinguishes exact published characteristics from parameters that an engineer must confirm in the device datasheet before schematic release or production procurement.

詢價 聯絡我們
STM32L433VCT6 - 80MHz Cortex-M4 256KB MCU | STMicroelectronics
STM32L433VCT6

STM32L433VCT6 - 80MHz Cortex-M4 256KB MCU | STMicroelectronics

STMicroelectronics STM32L433VCT6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with FPU, operating at up to 80 MHz and delivering 100 DMIPS. The device provides 256 KB of Flash memory and 64 KB of SRAM in a 100-pin LQFP package measuring 14 x 14 mm. Its operating supply range is 1.71 V to 3.6 V, with temperature grades extending to 125 °C. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, and peripherals into one package. The STM32L433 belongs to the STM32L4 family, where STM32 denotes the microcontrollers and microprocessors portfolio, L4 identifies the ultra-low-power performance class, and Cortex-M4 describes the 32-bit Arm processor architecture used by the device. The STM32L433VCT6 combines 256 KB of Flash with 64 KB of SRAM and includes a floating-point unit for efficient arithmetic in control and signal-processing code. According to the STM32L433xx manufacturer datasheet, the device supports USB full-speed operation and an LCD interface. Low-power operation includes a 200 nA VBAT mode that maintains the RTC and 32 x 32-bit backup registers. The Cortex-M4 core uses the Arm Thumb instruction set and operates at up to 80 MHz, providing 100 DMIPS as stated by STMicroelectronics. This processing capacity is suitable for control loops, human-interface firmware, sensor aggregation, communication gateways, and compact consumer devices that need more performance than a basic 8- or 16-bit controller. Typical applications include low-power industrial sensor nodes, USB-connected data-acquisition products, compact LCD instruments, building controls, and portable battery-powered equipment. The 100-pin LQFP package exposes a broad peripheral set and avoids the fine-pitch complexity associated with very small leadless packages, making it practical for prototypes and medium-density mixed-signal boards. Design with the STM32L433VCT6 by keeping decoupling capacitors close to the supply pins, reserving a low-noise analog supply path for sensitive analog sections, and validating USB impedance-controlled routing before fabrication. The manufacturer datasheet provides the definitive pin descriptions, alternate-function mappings, and decoupling recommendations for board implementation. This product page consolidates the device specifications, package details, application guidance, and drop-in upgrade paths for engineers evaluating STM32L4 designs. It also highlights how Flash capacity, SRAM availability, low-power features, and USB support affect component selection when an existing board must be reused without layout changes.

詢價 聯絡我們
STM32L442KCU6 - 80MHz Cortex-M4 256KB MCU | STMicroelectronics
STM32L442KCU6

STM32L442KCU6 - 80MHz Cortex-M4 256KB MCU | STMicroelectronics

STMicroelectronics STM32L442KCU6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 processor, operating at up to 80 MHz and providing 256 KB of Flash memory. The device is supplied in a 32-pin UFQFPN package measuring 5 x 5 mm. It is designed for compact embedded systems that require efficient processing, low power consumption, USB connectivity, and hardware security capabilities. An ultra-low-power microcontroller is an integrated circuit optimized to execute firmware while minimizing energy consumption during active operation, standby, and low-power states. The STM32L4 product family combines an Arm Cortex-M4 processor with embedded Flash, RAM, security features, and communication peripherals. This hierarchy places the STM32L442KCU6 in the STM32L4 family of 32-bit embedded processors and makes it suitable for portable, industrial, communications, and connected-device designs. Key device characteristics include an 80 MHz Cortex-M4 core, 256 KB of Flash, a 32-bit architecture, and operation from 2.5 V and 3.3 V supply levels. The STM32L442KC family also supports USB and AES-256 security functions. These capabilities allow the MCU to handle control logic, communications, secure boot-related processing, data acquisition, and user-interface tasks without requiring a separate processor. The Cortex-M4 architecture provides instruction-set capabilities suited to real-time embedded control while retaining a compact software model. Its 256 KB of Flash provides room for application firmware, configuration data, and boot code. Integration of USB and AES-256 functions on the same device can reduce component count in designs requiring a secure USB-connected control node, although the final system must account for the exact peripheral set and electrical limits of the selected orderable device. Typical applications include low-power USB sensor nodes, industrial monitoring modules, portable medical or laboratory equipment, building-control endpoints, and compact communications equipment. The 5 x 5 mm UFQFPN package also supports space-constrained designs where a larger quad-flat package would be inconvenient, although exposed-pad layout and thermal performance require careful PCB implementation. For PCB design, use the manufacturer's pin-description table when assigning tracks and confirm the exposed-pad connection requirements in the package drawing. Place decoupling capacitors close to the appropriate supply pins and route high-speed or sensitive signals away from noisy power-conversion stages. Firmware integration should begin with the device reference manual and the exact pin package assigned by the orderable part number. This product page organizes the core specifications, verified sourcing links, same-package alternatives, application guidance, and design considerations for engineers evaluating the STM32L442KCU6. It also provides a structured basis for comparing STM32L4 devices while preserving package and pin-compatibility requirements during replacement planning.

詢價 聯絡我們
STM32L443CCU6 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L443CCU6

STM32L443CCU6 - 80MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32L443CCU6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 core, operating up to 80 MHz, with 256 KB of Flash memory and a 48-pin UFQFPN 7 x 7 mm package. It supports a 1.71 V to 3.6 V power supply and combines an FPU, AES hardware acceleration, LCD support, and USB connectivity for compact embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one chip. The STM32L4 series belongs to the Arm Cortex-M4 microcontroller hierarchy and emphasizes energy-efficient operation. Its low-power modes make the STM32L443CCU6 suitable for battery-powered sensors, portable instruments, connected industrial equipment, and compact user-interface controllers where sleep-mode demand can affect overall service life. The STM32L443CCU6 operates at up to 80 MHz and provides 256 KB of Flash plus 64 KB of RAM. Its Arm Cortex-M4 core includes a floating-point unit for efficient arithmetic operations, while the integrated AES accelerator supports hardware-assisted encryption. The operating-supply range of 1.71 V to 3.6 V accommodates low-energy embedded systems, and the package supports surface-mount assembly in space-constrained products. Low-power behavior is a central design feature of the STM32L4 family. The device can consume 200 nA in VBAT mode while maintaining real-time-clock and backup-register operation, and it can enter an 8 nA shutdown mode with five wake-up pins. These figures allow firmware to preserve selected state and respond to external events without continuously running the main processor and peripheral systems. Typical applications include low-energy environmental sensors, wearable and wellness-device controllers, connected medical accessories, industrial condition-monitoring nodes, USB-connected portable equipment, and compact human-machine-interface controllers. Engineers can use the Cortex-M4 processing capability for control logic, the AES accelerator for protected data workflows, and the low-power modes for duty-cycled operation. Design the power tree around the 1.71 V to 3.6 V operating range, use decoupling close to the supply pins, and validate wake-up behavior in the final clock, peripheral, and GPIO configuration. If cryptographic performance, memory capacity, package dimensions, and peripheral assignments are critical, review the complete pin and peripheral tables before releasing a PCB layout. This product overview combines the manufacturer's core device specifications, package information, practical low-power design guidance, and validated same-package replacement analysis to support faster component selection and PCB planning.

USD $4.59 有庫存
STM32L443RCI6 - 80MHz Cortex-M4 MCU, 256KB, 64-UFBGA
STM32L443RCI6

STM32L443RCI6 - 80MHz Cortex-M4 MCU, 256KB, 64-UFBGA

The STMicroelectronics STM32L443RCI6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with floating-point unit, 80 MHz maximum clock, 256 KB Flash memory, 64 KB RAM, and a 64-UFBGA package measuring 5 x 5 mm. Verified distributor listings also identify USB, LCD, AES-256, and DFSDM support, making this MCU suitable for compact control, communications, security, and low-power embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one integrated circuit. The STM32L4 family belongs to the microcontroller hierarchy and targets applications where energy efficiency, real-time control, and peripheral integration are important. In this device, the Cortex-M4 core provides 32-bit execution with hardware floating-point capability, while the STM32L4 platform combines conventional embedded control with USB, display, and data-conversion functions. The verified feature set includes an 80 MHz operating frequency, 256 KB Flash organized as 256K x 8, and 64 KB RAM. The distributor descriptions also list LCD support, USB, AES-256 encryption, and DFSDM. These peripherals can reduce external component count by supporting human-machine interfaces, USB-connected equipment, hardware-assisted secure data handling, and digital signal acquisition. The 64-UFBGA package supports compact, high-density PCB designs but requires careful escape-routing and assembly planning. Technically, the Cortex-M4F architecture provides a practical balance between processing capability and low-power operation. Floating-point hardware is useful for sensor conditioning, control calculations, and digital signal processing without relying entirely on software arithmetic. The exact operating voltage, current, peripheral pin map, memory interfaces, and temperature limits are not supplied in the retrieved snippets, so those specifications remain subject to verification in the manufacturer datasheet before design release. Typical applications include low-power sensor nodes, industrial condition-monitoring equipment, USB-connected embedded controls, compact human-machine interfaces, security-aware portable products, and DFSDM-based audio or acquisition systems. Selection should prioritize the 64-UFBGA footprint, 256 KB Flash requirement, 64 KB RAM requirement, Cortex-M4 instruction compatibility, and required peripheral mix. Firmware, bootloader, pin multiplexing, clock configuration, and peripheral errata must also be reviewed. For a new PCB, route all 64 package balls according to the official pinout and land pattern rather than relying solely on the short distributor descriptions. Confirm USB transceiver requirements, decoupling, clock stability, exposed-ball assembly, and peripheral sharing before schematic release. This page synthesizes verified distributor data, package and feature information, replacement constraints, and engineering-oriented design guidance for STM32L443RCI6.

詢價 聯絡我們
STM32L443RCT6 - 80MHz Cortex-M4 MCU 256KB Flash | STMicroelectronics
STM32L443RCT6

STM32L443RCT6 - 80MHz Cortex-M4 MCU 256KB Flash | STMicroelectronics

The STMicroelectronics STM32L443RCT6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with FPU, 256KB Flash, 64KB SRAM, and integrated AES-256 hardware crypto, packaged in a 64-pin LQFP. It operates at up to 80 MHz delivering 100 DMIPS while maintaining the STM32L4 family's signature ultra-low-power performance. An Arm Cortex-M4 microcontroller is a 32-bit RISC processor core with DSP extensions and an optional single-precision floating-point unit, designed for deterministic real-time embedded control with low interrupt latency. Microcontrollers integrate the CPU core, Flash program memory, SRAM, and a rich set of peripherals into a single IC, forming the smallest complete compute subsystem for IoT and industrial designs. The STM32L4 series in particular extends this architecture with ST's ultra-low-power platform, embedding multiple voltage domains and dedicated low-power peripherals so the part can run from a coin cell for years. Key features of the STM32L443RCT6 include the Cortex-M4 core with FPU running at 80 MHz, 256 KB of Flash memory, 64 KB of SRAM, USB Full-Speed with Type-C Power Delivery support, an integrated LCD driver (4x44 or 8x40 segments), a 12-bit ADC (5 Msps), two 12-bit DACs, two operational amplifiers, and the AES-256 hardware cryptographic accelerator. It also includes the standard STM32 peripheral set: CAN 2.0B, I2C, SPI, USART, LPUART, timers, and an RTC with calendar. The architecture pairs an ART Accelerator with a multi-channel DMA, a 4 KB SRAM-based instruction cache, and ST's ultra-low-power voltage scaling core. This combination allows the part to wake from STANDBY in roughly 1.4 ms and remain in sleep modes drawing microamp-level currents while preserving register/RTC state, which is critical for battery-powered sensor nodes. Typical applications include ultra-low-power wireless sensor nodes, portable medical and wearable devices, smart meters, industrial HMI panels with LCD, USB-C powered accessories with Power Delivery negotiation, and secured IoT edge nodes leveraging the on-chip AES engine. Designers also deploy the device in audio front-ends, asset trackers, and battery-backed instrumentation. When designing with this MCU, plan the power tree carefully using ST's CubeMX tool to assign each rail (VDD, VDDA, VDD_USB, VBAT) to its required decoupling network. Pay particular attention to unused-pin handling: every GPIO must be set to a defined state to avoid parasitic current paths that can erode the low-power budget. This page synthesizes distributor pricing, same-family and cross-brand drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet, giving embedded engineers an actionable reference for BOM selection.

詢價 聯絡我們