產品(44,000+)

STM8L151F3P6TR - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics (Tape & Reel)
STM8L151F3P6TR

STM8L151F3P6TR - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM8L151F3P6TR is an 8-bit ultra-low-power microcontroller with up to 16 MIPS at 16 MHz, 8 KB of Flash memory, and a 20-pin TSSOP package. It is designed for compact, power-constrained embedded systems requiring low-power operation, RTC functions, timers, and integrated data EEPROM. The STM8L151x2/3 family uses an enhanced STM8 CPU core with a CISC architecture and optimized low-power modes. An ultra-low-power microcontroller is a semiconductor device designed to minimize energy consumption during standby, sleep, and active operation. The STM8L151x2/3 family combines an 8-bit CPU core, Flash program memory, EEPROM, timers, GPIO, communication peripherals, and low-power management in one compact package. This device family is suitable when a controller must balance fast control-loop execution with restricted energy budgets. The STM8L151F3P6TR provides 8 KB of Flash, up to 256 bytes of EEPROM according to the device description, and operation up to 16 MHz. It is identified as an STM8L EnergyLite microcontroller in distributor listings and is available in a 20-pin TSSOP package. The part is intended for low-voltage embedded designs where the MCU must handle control, sensing, communication, and periodic sensing without a high-power processor. The enhanced STM8 core provides increased processing power while retaining CISC advantages such as compact instruction representation and efficient code density. A 24-bit linear addressing space supports organized access to memory-mapped peripherals. The low-power architecture helps designers select suitable operating modes during idle periods and wake the controller for defined events or scheduled tasks. Typical applications include low-power sensor nodes, industrial monitoring modules, battery-powered instruments, building automation controls, portable measurement equipment, and embedded consumer devices. The 20-pin TSSOP package is useful for PCB layouts where a relatively small through-hole-style surface-mount footprint is preferred and when the design does not require a large high-pin-count microcontroller. When designing around STM8L151F3P6TR, verify the exact peripheral configuration, clock setup, pin multiplexing, memory limits, and low-power behavior in the manufacturer datasheet. The P6 suffix and package markings should be confirmed against the ordered device, and firmware should be tested for all required sleep, wake-up, RTC, and communication paths before production release. This page combines the verified manufacturer product information, distributor specifications, package details, and application-oriented design guidance. It also distinguishes electrically similar devices from true pin-for-pin drop-in alternatives, helping engineers make a defensible sourcing or redesign decision rather than treating unrelated low-power MCUs as direct substitutes.

詢價 聯絡我們
STM8L151F3U6TR - 16MHz 8KB MCU | STMicroelectronics
STM8L151F3U6TR

STM8L151F3U6TR - 16MHz 8KB MCU | STMicroelectronics

STMicroelectronics STM8L151F3U6TR is an 8-bit ultra-low-power microcontroller with a 16 MHz enhanced STM8 CPU core, 8 KB Flash memory, 1 KB RAM and 256 bytes of data EEPROM in a 20-pin UFQFPN 3 x 3 mm package. The device provides up to 16 MIPS processing performance and combines an RTC, timers, USART, I2C, SPI, ADC and comparators in a compact surface-mount package. An ultra-low-power microcontroller is designed to minimize energy consumption while providing enough computation and peripheral capability for compact embedded products. The STM8L family combines an 8-bit MCU core, internal flash and RAM, communication interfaces, analog conversion, and low-power operating modes in one integrated device. This places the STM8L151F3 within the hierarchy of microcontroller, embedded processor, and low-power semiconductor, making it appropriate for small systems whose operating budget is measured more strongly by current consumption than by maximum clock frequency. The STM8L151F3U6TR operates at up to 16 MHz and delivers up to 16 MIPS through the enhanced STM8 CPU core. Its 8 KB Flash provides program storage, while 1 KB of RAM supports working data and stack operations. Integrated communication resources include USART for serial links, I2C for board-level buses, and SPI for higher-speed peripherals. An ADC and comparators support analog measurement and thresholding without requiring separate analog devices. For energy-conscious designs, the MCU includes real-time-clock and timer resources alongside low-power operating modes. The RTC supports timekeeping-oriented functions, while multiple timers support periodic events, motor or actuator timing, and input capture. Compared with a discrete control solution, the integrated MCU reduces board area, component count, firmware complexity, and the number of interconnections that can introduce reliability issues. Typical uses include compact battery-powered sensors, smart metering equipment, medical monitoring products, industrial sensing nodes, and low-power IoT controls. The combination of 8 KB Flash, 16 MHz processing, serial interfaces, and analog peripherals allows one device to perform control, communication, and measurement while operating in a 3 x 3 mm package. The small footprint is especially useful where PCB area is constrained. Hardware design should reserve the exposed-pad and supply pins according to the manufacturer package drawing, connect the required decoupling capacitors close to their pins, and follow the recommended clock and programming interfaces. Firmware development should use STMicroelectronics tooling and the STM8 family programming resources, with attention to low-power transitions, peripheral clock gating, and wake-up configuration. This product page combines the manufacturer device information, distributor packaging details, technical feature summary, qualified replacement assessment, and practical integration guidance to support component selection, PCB planning, firmware preparation, and sourcing decisions for the STM8L151F3U6TR.

詢價 聯絡我們
STM8L151G2U3TR - 16MHz 4KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151G2U3TR

STM8L151G2U3TR - 16MHz 4KB Ultra-Low-Power MCU | STMicroelectronics

STMicroelectronics STM8L151G2U3TR is an ultra-low-power 8-bit STM8L EnergyLite microcontroller with a 16 MHz CPU, 4 KB of Flash program memory, and a 28-UFQFPN 4 x 4 mm package. It operates from 1.65 V to 3.6 V and combines an STM8 CPU core capable of reaching 16 MIPS with integrated EEPROM and a compact 28-pin surface-mount footprint. An ultra-low-power microcontroller is an embedded semiconductor designed to execute control tasks while minimizing energy consumption, especially during standby, sleep, and low-activity operating states. The STM8L family belongs to the broader hierarchy of embedded MCU, microprocessor, embedded controller, and energy-efficient semiconductor products. This positioning makes the STM8L151G2U3TR appropriate for compact battery-operated equipment where low supply voltage, limited board area, and deterministic embedded control are more important than high computational throughput. The device combines a 16 MHz STM8 core with 4 KB of Flash memory and integrated EEPROM. Its operating voltage range of 1.65 V to 3.6 V supports low-energy embedded systems, while the 28-UFQFPN package limits PCB footprint to 4 x 4 mm. The active product status identifies it as a currently supported member of STMicroelectronics' STM8L low-density product range. The STM8 architecture provides up to 16 MIPS at a 16 MHz clock, making the device suitable for compact control logic, peripheral management, and low-rate communications handling. Integrated EEPROM allows application-specific parameters, calibration values, or operating state to be retained in nonvolatile memory rather than being stored only in Flash. The exact RAM capacity, interface inventory, and detailed current-consumption figures should be confirmed from the manufacturer datasheet before final design release. Typical applications include battery-powered sensor nodes, compact industrial control modules, low-energy monitoring equipment, small appliance controllers, and connected embedded accessories. The 1.65 V minimum operating voltage is particularly useful when the design must operate directly from a single-cell energy source or a regulated low-voltage rail. The small package also supports space-constrained boards without requiring a large leaded package. Designers should confirm startup, reset, clock, decoupling, and programming requirements against the pin-description and application-information sections of the manufacturer datasheet. Keep the 4 x 4 mm UFQFPN layout, exposed-pad requirements, and assembly profile within the manufacturer's recommendations, and verify the complete peripheral configuration for the intended voltage and temperature range before committing the PCB. This product page combines the manufacturer family information with distributor package, memory, voltage, lifecycle, and ordering details. It also organizes same-family replacement considerations, a parameter comparison, and practical guidance for firmware and PCB decisions that are not evident from a bare ordering code.

詢價 聯絡我們
STM8L151G2U6 - 8-Bit 16MHz 4KB MCU | STMicroelectronics
STM8L151G2U6

STM8L151G2U6 - 8-Bit 16MHz 4KB MCU | STMicroelectronics

The STMicroelectronics STM8L151G2U6 is an 8-bit STM8L EnergyLite microcontroller with a 16 MHz clock, 4 KB of Flash program memory, and a 28-pin UFQFPN package measuring 4 x 4 mm. The device is designed for compact embedded-control systems where low power consumption, a small footprint, and integrated serial peripherals are important. Its operating voltage is listed from 1.8 V to 3.6 V, supporting battery-powered and low-voltage industrial equipment. The STM8L151 family belongs to the 8-bit microcontroller hierarchy: MCU, embedded microcontroller, low-power microcontroller, and semiconductor. This positioning places it between simple logic controllers and more capable 32-bit application processors. It is suitable for sensing, control, communication, and actuator-management functions where a dedicated 8-bit core can provide adequate performance without the cost, power, and board area of a higher-end processor. The STM8L151G2U6 combines a 16 MHz core with 4 KB of Flash memory and 41 I/O ports according to the product listing information. The STM8L151x4 and STM8L151x6 family documentation also identifies standard communication interfaces including SPI, I2C, and USART, along with an 8-bit timer. These peripherals support common embedded-system tasks such as sensor acquisition, external memory access, industrial serial links, and simple control loops. The exact peripheral counts and pin-level functions for the STM8L151G2U6 must be confirmed against the manufacturer pinout and datasheet before layout is released. Typical applications include compact environmental sensors, battery-powered condition-monitoring devices, LED-control modules, small motor-control boards, and low-power industrial instrumentation. The 1.8 V to 3.6 V supply range allows operation from single-cell energy-storage systems when the downstream regulator and cell chemistry are compatible. The 4 x 4 mm UFQFPN package also supports dense board layouts, although its fine pitch and exposed-pad requirements demand careful PCB design and assembly planning. For a new design, treat the STM8L151G2U6 as a low-power, compact, 8-bit control solution rather than a high-performance application processor. Confirm startup behavior, clock configuration, peripheral assignments, flash endurance requirements, and the exposed-pad connection in the manufacturer documentation. This page summarizes the verified device identity, package, memory, speed, voltage, and lifecycle information while highlighting the engineering checks that matter before schematic capture and PCB release.

詢價 聯絡我們
STM8L151G3U3 - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151G3U3

STM8L151G3U3 - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics

STMicroelectronics STM8L151G3U3 is an ultra-low-power 8-bit STM8L EnergyLite microcontroller with an enhanced STM8 CPU core, up to 16 MIPS at 16 MHz, and 8 KB of Flash memory. The device operates from 1.8 V to 3.6 V and is offered in a 28-pin UFQFPN package measuring 4 mm by 4 mm. Its 41 I/O ports support space-constrained embedded systems requiring low-power operation and a compact surface-mount footprint. An ultra-low-power microcontroller is a semiconductor designed to minimize energy consumption during active processing, standby, and low-power operating states. The STM8L family belongs to the STM8 8-bit MCU family and combines an EnergyLite architecture with integrated communications peripherals. This makes it suitable for battery-operated sensors, compact control modules, and connected industrial equipment where energy efficiency and fast wake-up behavior matter more than high arithmetic throughput. The STM8L151G3U3 combines a 16 MHz maximum clock with 8 KB of Flash, I2C, SPI, UART, and PWM capabilities, and up to 41 I/O ports. Its 1.8 V to 3.6 V supply range supports low-voltage embedded designs, while the 28-pin UFQFPN package limits board area. The enhanced STM8 CPU delivers up to 16 MIPS, giving useful processing performance for control loops, communication handling, and local peripheral management. The device is designed around the STM8L low-power architecture, allowing firmware to balance processing activity with low-power modes. I2C and SPI support digital sensors and external storage, UART supports point-to-point serial links, and PWM supports motor, dimming, and proportional-control functions. Because software, pin multiplexing, clock configuration, and low-power behavior are closely integrated, designers should follow the manufacturer datasheet when assigning alternate-function pins and configuring clocks. Typical applications include compact environmental sensors, low-power industrial condition-monitoring nodes, building controls, battery-powered accessories, actuator controllers, and connected measurement instruments. The 41 I/O ports are particularly useful when a design must connect multiple discrete inputs and outputs while avoiding a larger package. For designs requiring more memory, peripheral breadth, or a different footprint, the STM8L family can be evaluated before committing the PCB layout. A critical implementation consideration is the exposed-pad and thermal arrangement of the UFQFPN package. Place the required input and output decoupling capacitors close to their associated pins, follow the manufacturer pin-definition table when routing PCB traces, and expose the pad through a properly sized copper land pattern. Verify the final board against the package drawing and recommended land pattern rather than relying only on the nominal 4 mm by 4 mm body size. This product page combines the manufacturer's device information, distributor listing details, application engineering guidance, package considerations, and drop-in replacement analysis. It is designed to help engineers evaluate the STM8L151G3U3 against same-package alternatives before committing to a compact, low-power PCB design.

詢價 聯絡我們
STM8L151G3U6 - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151G3U6

STM8L151G3U6 - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151G3U6 is an ultra-low-power 8-bit microcontroller with a 16 MHz STM8 CPU, 8 KB Flash memory, 1 KB RAM, and a 28-pin UFQFPN 4x4 mm package. Its operating supply range is 1.8 V to 3.6 V, and the enhanced STM8 core provides up to 16 MIPS at 16 MHz for energy-efficient embedded control. The device is identified as an STM8L EnergyLite MCU and is suitable for compact, battery-operated systems. An ultra-low-power microcontroller is a semiconductor controller designed to minimize energy consumption while monitoring sensors, controlling actuators, and managing communication or timing functions. The STM8L family belongs to the 8-bit microcontroller hierarchy, where an embedded MCU integrates processor core, memory, GPIO, timers, and communication peripherals on one package. This integration reduces component count and supports portable, low-power industrial, sensor, consumer, and medical-control designs. Key verified features include 8 KB of Flash organized as 8K x 8, 16 MHz maximum clocking, 8-bit processing, a 1.8 V to 3.6 V supply range, and 28-pin UFQFPN packaging. The manufacturer describes the STM8L151x2/3 devices as offering increased processing power while maintaining an ultra-low-power architecture. The small 4x4 mm package supports space-constrained designs, while the exposed-pad construction requires careful PCB thermal and layout implementation. The STM8L151G3U6 is primarily controlled by its enhanced 8-bit STM8 core. Its memory arrangement provides a practical balance between firmware storage and working RAM for compact control tasks. The 16 MHz operating frequency supports responsive firmware execution, while the low-voltage operating range allows operation from common low-energy supply rails when the system power architecture supports them. Typical applications include battery-powered sensor nodes, compact industrial controllers, low-power IoT equipment, building automation modules, portable measurement products, and small consumer-device controllers. The device is particularly appropriate when board area, standby energy use, and a simple 8-bit control platform matter more than high arithmetic throughput. Designers should place decoupling capacitors close to the supply pins, follow the manufacturer’s exposed-pad land-pattern requirements, and verify signal-level compatibility with connected peripherals. Do not infer pin functions from the package count alone; use the official STM8L151G3 documentation for the complete pinout and exposed-pad connection. This page combines verified distributor and manufacturer information, same-family drop-in alternatives, comparison data, and practical design guidance for engineers evaluating STM8L151G3U6 sourcing and board compatibility.

詢價 聯絡我們
STM8L151G3U6TR - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics (Tape & Reel)
STM8L151G3U6TR

STM8L151G3U6TR - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM8L151G3U6TR is an ultra-low-power 8-bit microcontroller with a 16 MHz STM8 CPU, 8 KB Flash memory, 1 KB RAM, and a 28-pin UFQFPN 4x4 mm package. Its operating supply range is 1.8 V to 3.6 V, and the enhanced STM8 core provides up to 16 MIPS at 16 MHz for energy-efficient embedded control. The device is identified as an STM8L EnergyLite MCU and is suitable for compact, battery-operated systems. An ultra-low-power microcontroller is a semiconductor controller designed to minimize energy consumption while monitoring sensors, controlling actuators, and managing communication or timing functions. The STM8L family belongs to the 8-bit microcontroller hierarchy, where an embedded MCU integrates processor core, memory, GPIO, timers, and communication peripherals on one package. This integration reduces component count and supports portable, low-power industrial, sensor, consumer, and medical-control designs. Key verified features include 8 KB of Flash organized as 8K x 8, 16 MHz maximum clocking, 8-bit processing, a 1.8 V to 3.6 V supply range, and 28-pin UFQFPN packaging. The manufacturer describes the STM8L151x2/3 devices as offering increased processing power while maintaining an ultra-low-power architecture. The small 4x4 mm package supports space-constrained designs, while the exposed-pad construction requires careful PCB thermal and layout implementation. The STM8L151G3U6TR is primarily controlled by its enhanced 8-bit STM8 core. Its memory arrangement provides a practical balance between firmware storage and working RAM for compact control tasks. The 16 MHz operating frequency supports responsive firmware execution, while the low-voltage operating range allows operation from common low-energy supply rails when the system power architecture supports them. Typical applications include battery-powered sensor nodes, compact industrial controllers, low-power IoT equipment, building automation modules, portable measurement products, and small consumer-device controllers. The device is particularly appropriate when board area, standby energy use, and a simple 8-bit control platform matter more than high arithmetic throughput. Designers should place decoupling capacitors close to the supply pins, follow the manufacturer’s exposed-pad land-pattern requirements, and verify signal-level compatibility with connected peripherals. Do not infer pin functions from the package count alone; use the official STM8L151G3 documentation for the complete pinout and exposed-pad connection. This page combines verified distributor and manufacturer information, same-family drop-in alternatives, comparison data, and practical design guidance for engineers evaluating STM8L151G3U6TR sourcing and board compatibility.

詢價 聯絡我們
STM8L151G4U3 - 16MHz 16KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151G4U3

STM8L151G4U3 - 16MHz 16KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151G4U3 is an ultra-low-power 8-bit STM8L microcontroller with a 16 MHz maximum CPU frequency, 16 KB of embedded Flash memory, and a 28-pin UFQFPN package measuring 4 mm by 4 mm. It operates from a 1.8 V to 3.6 V supply range, making it suitable for compact, battery-operated, and energy-conscious embedded systems. An ultra-low-power microcontroller is an integrated circuit designed to execute firmware while minimizing energy consumption. The STM8L family combines an 8-bit CPU, embedded nonvolatile memory, analog and digital peripherals, and low-power operating modes in one device. This positions the STM8L151G4U3 within the hierarchy of microcontroller, embedded processor, semiconductor, and low-power system-on-chip design. Key features include 16 KB of Flash, a 16 MHz CPU, and up to 1 KB of data EEPROM. The peripheral set described for this device includes an RTC, LCD support, timers, USART, I2C, SPI, ADC, DAC, and comparators. These integrated resources can reduce external component requirements in meter, sensor-node, industrial-control, and low-power consumer designs. The STM8L architecture provides a compact CISC-based platform with a broad selection of communications, timing, analog-conversion, and display-related peripherals. Because the verified product information identifies the part as an 8-bit ultra-low-power MCU, it is particularly appropriate for control tasks that require deterministic peripheral access and low standby power rather than the processing throughput of a 32-bit Cortex-M processor. Typical applications include low-power sensing nodes, compact industrial controllers, battery-powered meters, panel-control systems, and communication-enabled sensor modules. The integrated USART, I2C, and SPI interfaces support serial sensors and transceivers, while the ADC, DAC, and comparators enable local measurement, signal generation, and threshold detection without requiring separate analog devices. Designers should verify the exact pin multiplexing, clock configuration, low-power current, and peripheral operating limits in the manufacturer datasheet before layout freeze. A 28-pin UFQFPN also requires careful escape-routing and inspection because its fine-pitch pads are not suitable for conventional hand soldering without appropriate equipment and process control. This product page consolidates verified distributor pricing, package information, lifecycle-oriented selection guidance, and traceable comparison data with practical design notes. It is intended to help engineers identify the correct low-power MCU and evaluate genuinely same-package alternatives without implying that different architectures or package variants are drop-in replacements.

詢價 聯絡我們
STM8L151G4U6 - 16MHz 16KB Ultra-Low-Power MCU | ST
STM8L151G4U6

STM8L151G4U6 - 16MHz 16KB Ultra-Low-Power MCU | ST

The STMicroelectronics STM8L151G4U6 is an ultra-low-power 8-bit microcontroller with a 16 MHz core, 16 KB of Flash memory, 2 KB of RAM, and a 28-pin UFQFPN package measuring 4 x 4 mm. Its 1.8 V to 3.6 V operating supply range and low-power-oriented STM8L architecture suit compact embedded products that need efficient control, sensing, communication, and low standby consumption. A microcontroller is an integrated circuit that executes embedded control software and connects external peripherals through digital and analog I/O. In the device hierarchy, the STM8L151G4U6 is an 8-bit MCU, part of the STM8L ultra-low-power family, and part of the broader embedded processor category. Its integrated flash memory stores firmware, while RAM supports execution state and application data. The supplied product data identifies 16 KB of Flash, 2 KB of RAM, a 16 MHz maximum clock, 28 pins, and operation from 1.8 V to 3.6 V. Search results also associate the STM8L151x4/6 family with RTC, LCD, timers, USART, I2C, SPI, ADC, DAC, and comparators. Exact peripheral availability, GPIO mapping, electrical limits, and low-power current figures must be checked against the manufacturer documentation for the exact ordering code. At 16 MHz, the device provides substantially more processing headroom than lower-clock 8-bit designs while retaining the simplicity of the STM8 architecture. The compact 4 x 4 mm UFQFPN package supports space-constrained assemblies, but its fine pitch requires careful PCB layout, solder inspection, and adequate thermal management during reflow and production. Typical uses include low-power sensor nodes, compact industrial controllers, battery-powered instruments, meter and keypad interfaces, communication modules, and small consumer appliances. Engineers should select peripheral functions by device variant rather than assuming every member of the STM8L151 family has identical resources. Firmware migration also depends on the exact pinout, clock tree, memory map, startup file, and development-tool configuration. For PCB implementation, verify the exposed-pad connection, decoupling requirements, SWIM programming access, and all alternate-function assignments in the official package drawing. Validate low-power modes against the actual peripheral set because stopping timers, ADC conversion, serial interfaces, or LCD-related circuitry can change achievable standby current. This page consolidates verified distributor specifications, family-level capabilities, sourcing references, and strict drop-in replacement findings. It separates confirmed STM8L151G4U6 values from family-level information so engineers can make a defensible sourcing and design decision without assuming unverified electrical or lifecycle details.

詢價 聯絡我們
STM8L151G4U6TR - 16MHz 16KB Ultra-Low-Power MCU | ST (Tape & Reel)
STM8L151G4U6TR

STM8L151G4U6TR - 16MHz 16KB Ultra-Low-Power MCU | ST (Tape & Reel)

The STMicroelectronics STM8L151G4U6TR is an ultra-low-power 8-bit microcontroller with a 16 MHz core, 16 KB of Flash memory, 2 KB of RAM, and a 28-pin UFQFPN package measuring 4 x 4 mm. Its 1.8 V to 3.6 V operating supply range and low-power-oriented STM8L architecture suit compact embedded products that need efficient control, sensing, communication, and low standby consumption. A microcontroller is an integrated circuit that executes embedded control software and connects external peripherals through digital and analog I/O. In the device hierarchy, the STM8L151G4U6TR is an 8-bit MCU, part of the STM8L ultra-low-power family, and part of the broader embedded processor category. Its integrated flash memory stores firmware, while RAM supports execution state and application data. The supplied product data identifies 16 KB of Flash, 2 KB of RAM, a 16 MHz maximum clock, 28 pins, and operation from 1.8 V to 3.6 V. Search results also associate the STM8L151x4/6 family with RTC, LCD, timers, USART, I2C, SPI, ADC, DAC, and comparators. Exact peripheral availability, GPIO mapping, electrical limits, and low-power current figures must be checked against the manufacturer documentation for the exact ordering code. At 16 MHz, the device provides substantially more processing headroom than lower-clock 8-bit designs while retaining the simplicity of the STM8 architecture. The compact 4 x 4 mm UFQFPN package supports space-constrained assemblies, but its fine pitch requires careful PCB layout, solder inspection, and adequate thermal management during reflow and production. Typical uses include low-power sensor nodes, compact industrial controllers, battery-powered instruments, meter and keypad interfaces, communication modules, and small consumer appliances. Engineers should select peripheral functions by device variant rather than assuming every member of the STM8L151 family has identical resources. Firmware migration also depends on the exact pinout, clock tree, memory map, startup file, and development-tool configuration. For PCB implementation, verify the exposed-pad connection, decoupling requirements, SWIM programming access, and all alternate-function assignments in the official package drawing. Validate low-power modes against the actual peripheral set because stopping timers, ADC conversion, serial interfaces, or LCD-related circuitry can change achievable standby current. This page consolidates verified distributor specifications, family-level capabilities, sourcing references, and strict drop-in replacement findings. It separates confirmed STM8L151G4U6TR values from family-level information so engineers can make a defensible sourcing and design decision without assuming unverified electrical or lifecycle details.

詢價 聯絡我們
STM8L151G4Y6TR - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151G4Y6TR

STM8L151G4Y6TR - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151G4Y6TR is an ultra-low-power 8-bit STM8L EnergyLite microcontroller with a 16 MHz clock, 32 KB of Flash memory, and a 28-WLCSP package measuring approximately 1.7 x 2.84 mm. Designed for compact, battery-operated systems, it combines an LCD controller, real-time clock, ADC, DAC, comparators, timers, and serial interfaces in a space-efficient device. An ultra-low-power microcontroller is an embedded controller designed to maintain accurate operation while consuming very little energy. The STM8L family belongs to the hierarchy of 8-bit microcontrollers, embedded processors, and semiconductor devices intended for portable, industrial, consumer, and always-on applications. Low-power operating modes are especially valuable in devices that spend most of their service life asleep between sensor readings, user actions, or scheduled events. Key device features include 32 KB of Flash, 1 KB of data EEPROM, a 16 MHz maximum CPU frequency, LCD support, RTC capability, and 2.5 V or 3.3 V operation. The integrated ADC, DAC, comparators, and communication peripherals reduce the need for discrete support components. The STM8L151x4/6 medium-density platform also provides modular peripherals and a common software approach across related STM8L devices, which can simplify firmware migration within the family. The controller uses an 8-bit STM8 architecture optimized for low-power embedded control rather than high-throughput application processing. Its combination of LCD drive capability and serial interfaces supports human-machine interfaces, portable instruments, compact sensors, and low-energy monitoring systems. The small 28-WLCSP footprint enables dense layouts, but its fine pitch requires careful PCB layout, solder-paste control, inspection, and assembly planning. Typical applications include low-power sensor nodes, compact health-monitoring products, industrial measurement modules, LCD-driven meters, remote controls, energy-aware IoT devices, and portable laboratory equipment. The STM8L151G4Y6TR is particularly appropriate where a compact package, local display interface, low-power operation, and mixed-signal peripherals are needed without an external display controller. PCB design should prioritize a clean supply path, adequate decoupling, and controlled escape routing from the 28-WLCSP lands. Confirm the exposed-pad, thermal, and assembly requirements in the manufacturer datasheet before layout release. Firmware selection should also account for the exact memory configuration and peripheral map of the ordered device rather than assuming that all STM8L variants are interchangeable.

詢價 聯絡我們
STM8L151G6U3 - 16MHz 32KB Low-Power MCU | ST
STM8L151G6U3

STM8L151G6U3 - 16MHz 32KB Low-Power MCU | ST

STMicroelectronics STM8L151G6U3 is an ultra-low-power 8-bit microcontroller with a 16 MHz maximum clock, 32 KB of Flash memory, and a 28-pin UFQFPN package measuring 4 mm by 4 mm. It operates from a 1.8 V to 3.6 V supply and targets compact embedded systems that require energy-conscious control, mixed-signal measurement, and communication peripherals without requiring a high-end 32-bit processor. An ultra-low-power microcontroller, or ULP MCU, is an energy-efficient semiconductor designed to remain responsive while consuming minimal power during active operation, standby, and wake-up transitions. The STM8L151 belongs to the STM8L EnergyLite family within STMicroelectronics' broader hierarchy of 8-bit microcontrollers, embedded processors, and semiconductor devices. Its low-power architecture makes it suitable for battery-operated sensors, portable instruments, industrial controls, and connected products that spend substantial time waiting for events. The STM8L151G6U3 provides 32 KB Flash, 2 KB of on-chip RAM, a 12-bit ADC, and a DAC according to the supplied manufacturer and distributor data. Its integrated peripheral set also includes an RTC, data EEPROM, timers, USART, I2C, SPI, comparators, and LCD support. These resources allow a compact design to sample analog inputs, maintain real-time information, communicate with sensors or external controllers, and drive a segment LCD without requiring several separate devices. The enhanced STM8 CPU core operates at up to 16 MHz, providing up to 16 MIPS according to the manufacturer family information. The device combines a 28-pin 4 mm by 4 mm UFQFPN package with analog and serial-interface functions, enabling high component density in space-constrained products. Its exact peripheral configuration, current consumption, timing limits, and absolute electrical limits should be confirmed against the current STMicroelectronics datasheet before a production design is released. Typical applications include low-energy environmental sensors, battery-powered measurement modules, compact industrial controllers, wearable accessories, smart-home endpoints, and small instrumentation products. For a sensor node, the ADC and timers can support periodic measurements while the RTC and low-power modes help control idle consumption. The USART, I2C, and SPI interfaces support external sensors, transceivers, memory, and host controllers, while LCD support is useful for local human-readable output. A critical design consideration is supply-voltage headroom. The MCU operates from 1.8 V to 3.6 V, so battery chemistry, regulator dropout, transient response, and brownout behavior must be evaluated together. Decoupling capacitors should be placed close to the supply pins, unused inputs should be configured appropriately, and low-power modes should be validated with the intended peripheral states rather than only with the core active. This page consolidates verified manufacturer and distributor information, package and interface guidance, pricing context, and practical application analysis. It also distinguishes documented functions from parameters that require confirmation from the manufacturer datasheet, supporting faster engineering comparison without treating unverified alternatives as drop-in replacements.

詢價 聯絡我們
STM8L151G6U3TR - 16MHz 32KB Low-Power MCU | ST (Tape & Reel)
STM8L151G6U3TR

STM8L151G6U3TR - 16MHz 32KB Low-Power MCU | ST (Tape & Reel)

STMicroelectronics STM8L151G6U3TR is an ultra-low-power 8-bit microcontroller with a 16 MHz maximum clock, 32 KB of Flash memory, and a 28-pin UFQFPN package measuring 4 mm by 4 mm. It operates from a 1.8 V to 3.6 V supply and targets compact embedded systems that require energy-conscious control, mixed-signal measurement, and communication peripherals without requiring a high-end 32-bit processor. An ultra-low-power microcontroller, or ULP MCU, is an energy-efficient semiconductor designed to remain responsive while consuming minimal power during active operation, standby, and wake-up transitions. The STM8L151 belongs to the STM8L EnergyLite family within STMicroelectronics' broader hierarchy of 8-bit microcontrollers, embedded processors, and semiconductor devices. Its low-power architecture makes it suitable for battery-operated sensors, portable instruments, industrial controls, and connected products that spend substantial time waiting for events. The STM8L151G6U3TR provides 32 KB Flash, 2 KB of on-chip RAM, a 12-bit ADC, and a DAC according to the supplied manufacturer and distributor data. Its integrated peripheral set also includes an RTC, data EEPROM, timers, USART, I2C, SPI, comparators, and LCD support. These resources allow a compact design to sample analog inputs, maintain real-time information, communicate with sensors or external controllers, and drive a segment LCD without requiring several separate devices. The enhanced STM8 CPU core operates at up to 16 MHz, providing up to 16 MIPS according to the manufacturer family information. The device combines a 28-pin 4 mm by 4 mm UFQFPN package with analog and serial-interface functions, enabling high component density in space-constrained products. Its exact peripheral configuration, current consumption, timing limits, and absolute electrical limits should be confirmed against the current STMicroelectronics datasheet before a production design is released. Typical applications include low-energy environmental sensors, battery-powered measurement modules, compact industrial controllers, wearable accessories, smart-home endpoints, and small instrumentation products. For a sensor node, the ADC and timers can support periodic measurements while the RTC and low-power modes help control idle consumption. The USART, I2C, and SPI interfaces support external sensors, transceivers, memory, and host controllers, while LCD support is useful for local human-readable output. A critical design consideration is supply-voltage headroom. The MCU operates from 1.8 V to 3.6 V, so battery chemistry, regulator dropout, transient response, and brownout behavior must be evaluated together. Decoupling capacitors should be placed close to the supply pins, unused inputs should be configured appropriately, and low-power modes should be validated with the intended peripheral states rather than only with the core active. This page consolidates verified manufacturer and distributor information, package and interface guidance, pricing context, and practical application analysis. It also distinguishes documented functions from parameters that require confirmation from the manufacturer datasheet, supporting faster engineering comparison without treating unverified alternatives as drop-in replacements.

詢價 聯絡我們
STM8L151G6U6 - 8-bit Ultra-Low-Power MCU, 32KB Flash | STMicroelectronics
STM8L151G6U6

STM8L151G6U6 - 8-bit Ultra-Low-Power MCU, 32KB Flash | STMicroelectronics

The STM8L151G6U6 is an 8-bit ultra-low-power microcontroller from STMicroelectronics' STM8L EnergyLite family. It operates at a clock speed of 16 MHz and features 32 KB of Flash memory, 2 KB of SRAM, and 1 KB of data EEPROM. The device is housed in a compact 28-pin UFQFPN (4x4 mm) package, making it ideal for space-constrained applications. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit central processing unit (CPU), which processes data in 8-bit chunks. It integrates a processor core, memory (Flash, SRAM, EEPROM), and programmable peripherals (timers, communication interfaces, ADC, DAC) on a single integrated circuit. In the system hierarchy, an 8-bit MCU is a type of embedded controller, which falls under the broader category of microcontrollers, which are themselves a subset of integrated circuits used in embedded systems. The STM8L151G6U6 is specifically optimized for ultra-low-power operation, targeting battery-powered and energy-harvesting applications. Key features of the STM8L151G6U6 include a 16 MHz CPU clock, 32 KB Flash memory, 2 KB SRAM, and 1 KB data EEPROM. It also integrates a 12-bit ADC, a 12-bit DAC, two comparators, an RTC, LCD driver, and multiple communication interfaces (USART, I2C, SPI). The device supports a wide supply voltage range of 1.8V to 3.6V, and its ultra-low-power modes include a Halt mode with 0.35 µA current consumption, making it suitable for battery-powered devices. The STM8L151G6U6 is built on ST's low-power 8-bit core, which is designed for energy efficiency. It features a modular peripheral set that is shared across STM8 and STM32 families, simplifying code migration. The device includes a 4-channel DMA controller, which offloads data transfer tasks from the CPU, improving overall system performance. The ultra-low-power design extends battery life in portable applications. Typical applications include portable medical devices, sensor nodes, smart meters, and industrial control systems. The device's low power consumption and rich peripheral set make it ideal for applications requiring long battery life and reliable operation. For example, in a wireless sensor node, the STM8L151G6U6 can wake up periodically, read sensors, and transmit data via its USART or SPI interface, then return to Halt mode to conserve power. When designing with the STM8L151G6U6, ensure proper decoupling of the power supply pins with 100 nF capacitors placed close to the VDD and VSS pins. The device's low-power modes require careful configuration of the clock system and peripheral clocks to achieve the specified current consumption. Additionally, the UFQFPN-28 package has an exposed pad that should be connected to ground for optimal thermal performance.

詢價 聯絡我們
STM8L151G6U7 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151G6U7

STM8L151G6U7 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151G6U7 is an ultra-low-power 8-bit CISC microcontroller with a 16 MHz CPU, 32 KB of Flash memory, integrated EEPROM, and a 28-pin UFQFPN 4x4 mm package. It belongs to the medium-density STM8L151x4/6 device family, combining low-power sensing and control capabilities with ADC, DMA, and embedded EEPROM resources. The target is the STM8L EnergyLite line, where the MCU provides dedicated low-power operating modes and fast wake-up behavior for compact, battery-operated systems. An ultra-low-power microcontroller is a semiconductor designed to minimize energy consumed during idle, sleep, and standby operation while still providing enough processing capability for control tasks. The STM8L family sits within the broader hierarchy of microcontroller, embedded processor, and semiconductor products. Its CISC architecture and integrated peripherals are intended to reduce external component count in low-speed sensing, metering, portable-instrumentation, and industrial-control designs. Key verified characteristics include a maximum CPU frequency of 16 MHz, 32 KB of Flash organized as 32K x 8, and a 28-pin UFQFPN package. The supplied distributor listing also identifies 2 KB of EEPROM, while the manufacturer describes the STM8L151G6 as a medium-density member of the STM8L ultra-low-power 8-bit family. Its integrated ADC and DMA support makes it useful where sampled analog signals must be transferred without excessive processor involvement. The STM8L151G6U7 architecture is tailored for low-power sensing and embedded control rather than high-throughput applications. Flash provides the main firmware area, integrated EEPROM supports nonvolatile data storage, and the ADC/DMA resources reduce the need for separate signal-acquisition components. The 4x4 mm UFQFPN footprint is suitable for space-constrained assemblies, although its fine pitch requires capable PCB assembly and careful land-pattern design. Typical uses include battery-powered environmental sensors, compact metering instruments, low-speed industrial controllers, portable measurement equipment, and connected sensing nodes. The MCU is appropriate when energy efficiency, integrated data acquisition, and a small footprint matter more than a high-pin-count interface or a large program-memory budget. Designers should also evaluate the available peripheral mix and PCB assembly capability for the 0.6 mm-class package before releasing a design to production. For implementation, follow the STMicroelectronics pin assignment and recommended decoupling guidance rather than relying on a generic QFN land pattern. Verify the exposed-pad connection, programming interface, oscillator arrangement, and ADC input routing against the official device documentation. Because the provided source snippets do not expose the complete pin table, electrical limits, or operating-temperature grades, those details require confirmation in the manufacturer datasheet before layout signoff. This page combines verified manufacturer and distributor facts with package-level selection guidance, comparison criteria, sourcing links, and engineering-oriented usage analysis. It distinguishes confirmed device characteristics from unavailable details instead of estimating missing electrical values, helping engineers make an initial selection while preserving a traceable path to the official STM8L151G6 documentation.

詢價 聯絡我們
STM8L151K2U6 - 16MHz 8-Bit Ultra-Low-Power MCU | STMicroelectronics
STM8L151K2U6

STM8L151K2U6 - 16MHz 8-Bit Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151K2U6 is an ultra-low-power 8-bit microcontroller with an STM8L EnergyLite CPU core, operating up to 16 MHz and delivering up to 16 MIPS of processing performance. It includes 4 KB of flash program memory and is supplied in a 32-pin UFQFPN package measuring 5 mm by 5 mm. The device is designed for compact, low-energy embedded systems where fast wake-up, low supply voltage operation, and a broad set of peripheral functions are important. An STM8L is an ultra-low-power microcontroller family within the wider microcontroller and embedded-processing hierarchy. It combines a simple 8-bit CISC architecture with power-management features intended for battery-operated and always-on equipment. The STM8L151x2 and STM8L151x3 devices share the low-density platform, while the K2 designation identifies this 32-pin, 4 KB Flash configuration. This combination allows designers to use the same MCU family for sensing, control, communication, and low-power monitoring functions. The STM8L151K2U6 operates from a 1.8 V to 3.6 V supply, as stated by the manufacturer product information, and provides a maximum clock speed of 16 MHz. Its 41 I/O ports support compact embedded layouts, while the 12-bit and 30-bit peripheral capabilities referenced in the product listing support common control and measurement tasks. The low-power architecture is useful for sensor nodes, industrial controls, portable instruments, and battery-powered accessories. The part is identified as an active, ultra-low-power MCU by STMicroelectronics and is offered in a 32-pin UFQFPN package. Its principal engineering trade-off is the modest 4 KB Flash capacity compared with larger STM8 devices. Firmware should therefore be structured for efficient storage, and application requirements involving graphical interfaces, large protocol stacks, or extensive data logging should be reviewed before design freeze. Typical applications include industrial sensor nodes, low-power wireless-control endpoints, portable measurement products, and embedded accessory controllers. Designers should preserve adequate decoupling close to the supply pins, confirm exposed-pad soldering requirements from the manufacturer datasheet, and validate low-power modes against the actual sensor and communication load. These measures help preserve the intended low-power behavior while maintaining signal integrity and reliable startup. This page organizes the manufacturer product information, distributor listing details, package characteristics, and application guidance for engineers evaluating STM8L151K2U6. It also highlights the memory-density limitation, supply-voltage range, low-power positioning, and practical PCB considerations that distinguish this MCU from larger STM8L variants.

詢價 聯絡我們
STM8L151K3U3 - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151K3U3

STM8L151K3U3 - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151K3U3 is an ultra-low-power 8-bit microcontroller with a 16 MHz enhanced STM8 CPU core, up to 16 MIPS processing performance, and 8 KB of embedded Flash memory. The device is packaged in a 32-pin UFQFPN with exposed pad measuring 5 mm by 5 mm and operates from a 1.8 V to 3.6 V supply range. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals into one compact device. The STM8L belongs to the STM8L EnergyLite family, a low-power branch of STM8 microcontrollers used for embedded control, sensing, communications, and battery-powered products. Its role within an embedded system is to execute application firmware, acquire sensor data, control outputs, and coordinate low-energy operating modes. The STM8L151K3U3 provides 41 I/O ports and an 8 KB Flash program memory within its 32-pin package. Its enhanced STM8 core reaches 16 MIPS at 16 MHz, supporting responsive control tasks while the EnergyLite architecture emphasizes low-power operation. The 1.8 V to 3.6 V operating range accommodates 1.8 V and 3.3 V systems, while the UFQFPN-32 package supports compact surface-mount PCB layouts. The STM8L151x2 and STM8L151x3 devices target low-density designs where memory economy and low power are more important than a large general-purpose peripheral set. The STM8L151K3U3 is the UFQFPN-32 ordering configuration with 8 KB Flash. Firmware should be selected around the STM8L low-power operating model, and unused pins should be handled according to the manufacturer pin-description and connection guidance. Typical applications include low-power sensor nodes, compact industrial controls, building and access equipment, battery-operated instruments, connected sensing devices, and portable products. Its 41 I/O ports are useful for digital monitoring and control, while the 8-bit architecture and 16 MHz clock are appropriate for embedded tasks that do not require a high-performance 32-bit processor. A key design consideration is the exposed-pad thermal and electrical connection in the UFQFPN package. The exposed pad should be connected according to the manufacturer layout guidance, and the PCB should provide suitable copper area for heat spreading and low-impedance supply distribution. Firmware must also verify the device's low-power wake-up behavior against the response time required by the end application. This page combines manufacturer specifications, package and sourcing details, practical application guidance, and verified comparison information. It is intended to help engineers assess whether the STM8L151K3U3's memory size, I/O count, clock rate, voltage range, and low-power architecture match a specific embedded-control design.

詢價 聯絡我們
STM8L151K3U6 - 16MHz 8KB Low-Power MCU | STMicroelectronics
STM8L151K3U6

STM8L151K3U6 - 16MHz 8KB Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151K3U6 is an ultra-low-power 8-bit STM8L EnergyLite microcontroller with up to 16 MIPS at 16 MHz, 8 KB of Flash memory, and a 32-pin UFQFPN package rated for a 1.8 V to 3.6 V supply range. Its combination of an 8-bit CISC core, compact footprint, and low-power operation suits embedded control, sensing, and connected battery-powered products. An ultra-low-power microcontroller is an embedded semiconductor designed to execute control tasks while minimizing energy consumption during active operation, sleep, and standby. The STM8L151K3 belongs to the STM8L EnergyLite hierarchy of 8-bit microcontrollers, combining real-time control with peripheral integration for compact industrial, consumer, and IoT equipment. The principal characteristics include a maximum clock frequency of 16 MHz, processing performance up to 16 MIPS, 8 KB of program Flash, and approximately 41 I/O ports. According to the STMicroelectronics product page, the enhanced STM8 core increases processing power while retaining the architecture's straightforward embedded-control focus. Operation from 1.8 V to 3.6 V also allows integration with low-energy sensor nodes and modern 3.3 V system rails. The device's 32-pin UFQFPN package provides a compact surface-mount solution with an exposed pad. Its small land pattern is useful in space-constrained products, although thermal design, soldering profile, and exposed-pad layout must follow the manufacturer's package guidance. The specified temperature options cover −40 °C to 85 °C or −40 °C to 125 °C, supporting both commercial and extended-temperature industrial designs. Typical applications include low-power sensor nodes, building and industrial control modules, compact instrumentation, battery-operated accessories, and IoT equipment that periodically wakes to acquire and process data. The 8-bit architecture is especially effective for control loops, user-interface handling, communications, and peripheral coordination where simple instruction execution and deterministic behavior are more important than high computational throughput. When laying out a circuit, treat the exposed thermal pad and its via pattern as part of the electrical and thermal design rather than as an optional copper feature. Confirm pin functions, decoupling requirements, programming connections, and operating limits against the manufacturer datasheet for the exact ordering code before releasing the PCB. This page combines the manufacturer product information with package, application, purchasing, and drop-in replacement guidance to help engineers evaluate the STM8L151K3U6 before schematic capture and PCB layout.

詢價 聯絡我們
STM8L151K4T3 - 16MHz 16KB Ultra-Low-Power 8-Bit MCU | ST
STM8L151K4T3

STM8L151K4T3 - 16MHz 16KB Ultra-Low-Power 8-Bit MCU | ST

The STMicroelectronics STM8L151K4T3 is an ultra-low-power 8-bit microcontroller operating at up to 16 MHz, with 16 KB of Flash memory and a 32-pin LQFP 7 x 7 mm package. It belongs to the medium-density STM8L ultra-low-power family, combining low-power operation with embedded control peripherals in a compact surface-mount package. A microcontroller is a programmable semiconductor that integrates a CPU, Flash program memory, data memory, timers, communication interfaces, and GPIO into one device. The STM8L family is designed for embedded systems where energy efficiency, deterministic peripheral access, and low standby current are more important than the processing power associated with 32-bit microcontrollers. The STM8L151K4T3 is therefore a microcontroller rather than a general-purpose processor. The device provides 16 KB of Flash memory, up to 16 MHz clocking, and 1 KB of data EEPROM according to the STM8L151 datasheet. Its peripheral set includes real-time clock, timer, LCD, and low-power functions. These characteristics support compact battery-operated products, industrial controllers, measurement equipment, and user-interface systems in which one MCU must combine control logic, display handling, and periodic sensing. The STM8 architecture provides an 8-bit execution model and a compact peripheral set intended for low-cost, low-power control. Ultra-low-power modes allow the MCU to spend substantial operating time in reduced-energy states between sensor readings or user interactions. Design decisions should account for the relationship between active-mode clocking, peripheral activity, and the selected regulator configuration rather than treating the 16 MHz maximum frequency as a continuous-power figure. Typical uses include low-energy sensor nodes, battery-powered meters, industrial control panels, programmable timers, LCD-driven instruments, and compact consumer appliances. In an LCD instrument, the integrated display-related resources can reduce the need for external display-control circuitry. In a battery-powered sensor, low-power operating modes can extend service intervals by reducing the amount of time the processor and peripherals remain active. When designing the PCB, provide the supply and decoupling connections specified in the STMicroelectronics application guidance, keep high-current and sensitive signal paths separated, and verify external component ratings against the selected I/O and supply conditions. Firmware should also use the low-power routines and peripheral configuration sequence described in the device reference documentation rather than assuming a generic 8-bit MCU startup model. This product page organizes the STM8L151K4T3 specifications, qualified same-package alternatives, application guidance, and design notes into a concise engineering reference. It supports initial device selection while directing detailed electrical-limit, pin, and firmware decisions to the manufacturer documentation.

詢價 聯絡我們
STM8L151K4T6 - 16MHz 16KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151K4T6

STM8L151K4T6 - 16MHz 16KB Ultra-Low-Power MCU | STMicroelectronics

STMicroelectronics STM8L151K4T6 is an ultra-low-power 8-bit STM8L microcontroller rated up to 16 MHz, with 16 KB of Flash memory, 2 KB of RAM and 1 KB of data EEPROM in a 32-pin LQFP (7x7) package. The device combines an STM8 8-bit CPU with low-power operation, analog conversion, timers, RTC capability, LCD support, and serial peripherals, making it suitable for compact embedded systems that must balance processing capability, low standby demand and board area. An ultra-low-power microcontroller is a semiconductor controller designed to minimize energy consumption while retaining the processing, sensing and communication functions needed for embedded products. The STM8L151 belongs to the STM8L hierarchy of low-power 8-bit MCUs, with the STM8L151K4 family positioned between simpler low-cost STM8 devices and higher-density members with larger memory capacities. Its analog and timing resources allow the MCU to supervise sensors, operate human-interface controls and manage low-speed communications without requiring several discrete components. Key features include 16 KB Flash, 2 KB RAM, 1 KB EEPROM and a maximum 16 MHz clock. Integrated resources include an ADC, DAC, comparators, timers, USART, I2C and SPI interfaces, plus RTC and LCD-related capabilities identified for the STM8L151 family. These peripherals reduce external component count in battery-operated instruments, small industrial controls, sensor nodes and compact consumer equipment. The STM8L architecture is based on an 8-bit CISC-style core and provides an economical platform for control-oriented firmware. Its combination of EEPROM, RTC capability, analog peripherals and multiple communication interfaces allows designers to retain calibration data, acquire analog inputs, produce an analog output and exchange data with external sensors or actuators from one controller. The 32-LQFP package also exposes enough I/O for keypad scanning, display control and peripheral connections in space-constrained designs. Typical applications include battery-powered measurement instruments, compact energy meters, industrial sensor interfaces, LCD-based control panels, environmental monitoring, portable accessories and low-power building-control nodes. Its serial interfaces support sensors and external transceivers, while the timers and comparators simplify periodic sampling, edge detection and threshold-based control tasks. The principal design consideration is the operating-voltage envelope. Distributor data identifies 2.5 V and 3.3 V supply use, while an operating-power-supply indication of 3.6 V also appears in available material; designers must resolve the exact minimum and maximum limits against the manufacturer datasheet for the selected voltage variant before final schematic release. External bypass capacitors, oscillator requirements and unused-pin handling should follow ST's reference guidance. This page consolidates verified manufacturer and distributor information, same-package alternatives, parameter comparisons and practical selection guidance. It adds engineering context around memory, interfaces, analog functions and supply constraints while clearly identifying specifications that still require confirmation from the manufacturer datasheet.

詢價 聯絡我們
STM8L151K4T6TR - 16MHz 16KB Ultra-Low-Power MCU | STMicroelectronics (Tape & Reel)
STM8L151K4T6TR

STM8L151K4T6TR - 16MHz 16KB Ultra-Low-Power MCU | STMicroelectronics (Tape & Reel)

STMicroelectronics STM8L151K4T6TR is an ultra-low-power 8-bit STM8L microcontroller rated up to 16 MHz, with 16 KB of Flash memory, 2 KB of RAM and 1 KB of data EEPROM in a 32-pin LQFP (7x7) package. The device combines an STM8 8-bit CPU with low-power operation, analog conversion, timers, RTC capability, LCD support, and serial peripherals, making it suitable for compact embedded systems that must balance processing capability, low standby demand and board area. An ultra-low-power microcontroller is a semiconductor controller designed to minimize energy consumption while retaining the processing, sensing and communication functions needed for embedded products. The STM8L151 belongs to the STM8L hierarchy of low-power 8-bit MCUs, with the STM8L151K4 family positioned between simpler low-cost STM8 devices and higher-density members with larger memory capacities. Its analog and timing resources allow the MCU to supervise sensors, operate human-interface controls and manage low-speed communications without requiring several discrete components. Key features include 16 KB Flash, 2 KB RAM, 1 KB EEPROM and a maximum 16 MHz clock. Integrated resources include an ADC, DAC, comparators, timers, USART, I2C and SPI interfaces, plus RTC and LCD-related capabilities identified for the STM8L151 family. These peripherals reduce external component count in battery-operated instruments, small industrial controls, sensor nodes and compact consumer equipment. The STM8L architecture is based on an 8-bit CISC-style core and provides an economical platform for control-oriented firmware. Its combination of EEPROM, RTC capability, analog peripherals and multiple communication interfaces allows designers to retain calibration data, acquire analog inputs, produce an analog output and exchange data with external sensors or actuators from one controller. The 32-LQFP package also exposes enough I/O for keypad scanning, display control and peripheral connections in space-constrained designs. Typical applications include battery-powered measurement instruments, compact energy meters, industrial sensor interfaces, LCD-based control panels, environmental monitoring, portable accessories and low-power building-control nodes. Its serial interfaces support sensors and external transceivers, while the timers and comparators simplify periodic sampling, edge detection and threshold-based control tasks. The principal design consideration is the operating-voltage envelope. Distributor data identifies 2.5 V and 3.3 V supply use, while an operating-power-supply indication of 3.6 V also appears in available material; designers must resolve the exact minimum and maximum limits against the manufacturer datasheet for the selected voltage variant before final schematic release. External bypass capacitors, oscillator requirements and unused-pin handling should follow ST's reference guidance. This page consolidates verified manufacturer and distributor information, same-package alternatives, parameter comparisons and practical selection guidance. It adds engineering context around memory, interfaces, analog functions and supply constraints while clearly identifying specifications that still require confirmation from the manufacturer datasheet.

詢價 聯絡我們
STM8L151K4U6 - 16MHz 16KB Flash 8-Bit MCU | STMicroelectronics
STM8L151K4U6

STM8L151K4U6 - 16MHz 16KB Flash 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8L151K4U6 is an ultra-low-power 8-bit microcontroller with a 16 MHz clock, 16 KB of Flash program memory, 41 I/O ports, and a 32-pin UFQFPN package measuring 5 mm by 5 mm. It operates from a 1.8 V to 3.6 V supply and belongs to the medium-density STM8L151x4/6 family. The STM8L151K4U6 combines an 8-bit CPU, embedded Flash, data EEPROM, real-time clock capability, LCD support, timers, communication peripherals, analog conversion, and low-power operating modes in a compact surface-mount package. An ultra-low-power microcontroller is an integrated circuit optimized to complete control tasks while consuming as little energy as possible during active operation, sleep, and deeper low-power states. This makes the STM8L architecture useful for battery-powered sensors, compact industrial controls, connected measurement equipment, and consumer products that must operate for long periods without continuous external power. The STM8L family belongs to the broader hierarchy of 8-bit microcontroller, embedded controller, processor, and semiconductor product categories. The STM8L151K4U6 combines 16 KB Flash with a maximum 16 MHz system clock in a 5 mm by 5 mm UFQFPN package. Its listed peripherals include timers, USART, I2C, SPI, ADC, DAC, comparators, an RTC, and 1 KB data EEPROM. The integrated LCD capability supports segment-based human-interface designs, while the ADC and comparators allow the device to process analog sensor signals without requiring separate interface components. Its 41 I/O ports provide substantial interface flexibility within a compact footprint. The STM8L151x4/6 product family is structured around an 8-bit embedded-control architecture designed for energy-efficient operation. Its combination of serial interfaces supports connections to displays, sensors, transceivers, data converters, and other embedded peripherals. The timer and real-time-clock functions enable periodic measurement, event timing, and low-duty-cycle acquisition, while the analog peripherals support thresholding, signal conditioning, and monitoring functions. Typical applications include battery-operated environmental sensors, compact industrial monitoring modules, low-power data loggers, LCD-driven meters, wearable accessories, appliance control boards, and connected industrial nodes. The device is particularly suitable when a compact 8-bit controller, moderate Flash capacity, and multiple communication interfaces are more appropriate than a higher-cost application processor. Its low operating-voltage range also supports energy harvesting and coin-cell powered designs when the external sensor load permits. Designers should verify the exact pin functions, exposed-pad connection, decoupling requirements, clock configuration, and low-power state transitions in the manufacturer datasheet before layout release. Keep the power and ground connections compact, route sensitive analog inputs away from fast digital signals, and confirm that firmware drivers match the selected package and peripheral set. The UFQFPN body is compact but its fine-pitch footprint still requires controlled solder mask, paste, and assembly processes. This product summary combines the manufacturer family description with distributor specification, package, lifecycle, and interface information. It also organizes drop-in alternatives, application guidance, and engineering considerations so engineers can assess the STM8L151K4U6 against the same-package STM8L family options without relying on a single distributor listing.

詢價 聯絡我們
STM8L151K6T3 - 8-Bit 16MHz Ultra-Low-Power MCU | STMicroelectronics
STM8L151K6T3

STM8L151K6T3 - 8-Bit 16MHz Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151K6T3 is an 8-bit ultra-low-power STM8L EnergyLite microcontroller with a 16 MHz clock, 32 KB Flash memory, 1 KB data EEPROM, and a 32-LQFP 7 x 7 mm package. It is designed for energy-sensitive embedded control applications that require low-power operation, compact integration, and embedded peripherals. The device operates from 1.8 V to 3.6 V and is available in the -40°C to +85°C temperature range. Its 41 I/O ports provide substantial external connectivity for sensors, human-interface equipment, and compact control systems. An ultra-low-power 8-bit microcontroller is a category of embedded semiconductor intended to minimize energy consumption while executing control tasks. Within the broader hierarchy, the STM8L151K6T3 belongs to the STM8L family, STM8 8-bit microcontrollers, and the microcontroller product class. Its EnergyLite architecture is relevant to battery-operated instruments, low-power sensors, meters, and portable equipment where duty-cycled sleep operation can extend operating time between battery replacements or maintenance visits. The STM8L151K6T3 provides 32 KB of Flash for firmware, 1 KB of data EEPROM for retained parameters, and a maximum clock frequency of 16 MHz. Its 41 I/O ports support external interfacing, while integrated 12-bit ADC and timer resources reduce the need for separate components. The 1.8 V to 3.6 V operating range accommodates common 2.5 V and 3.3 V system rails. The 32-LQFP package measures 7 x 7 mm and supports surface-mount manufacturing. The STM8L151K6T3 is positioned between simple 8-bit controllers and more complex 32-bit microcontrollers. It provides the direct addressing and compact peripheral set associated with the STM8 family while retaining a 16 MHz operating clock. The 32 KB Flash capacity supports more structured firmware than the smallest STM8 devices, and the inclusion of EEPROM and an ADC makes the part suitable for self-contained measurement and control nodes without extensive external circuitry. Typical applications include compact industrial control modules, battery-powered environmental sensors, electronic utility meters, compact keypads, and low-power human-interface devices. In a sensing product, the MCU can acquire analog measurements through its 12-bit ADC, apply control logic, and manage a low-duty-cycle operating profile. The 41 available I/O ports also make it practical to connect multiple digital inputs, displays, indicators, or communication interfaces. Designers should review the complete manufacturer datasheet for the exact pin assignments, peripheral multiplexing, oscillator options, and low-power modes before laying out the PCB. Particular attention should be paid to supply decoupling, analog-input routing, unused I/O handling, and the configuration of pins shared by multiple peripherals. These details are essential for reliable low-power operation and avoiding conflicts between LCD, timer, ADC, and communication functions. This page consolidates the verified manufacturer, distributor, and cross-reference information for the STM8L151K6T3, then adds application guidance, parameter comparisons, procurement context, and drop-in replacement analysis. It is intended to help engineers identify whether the 32 KB, 16 MHz, 8-bit configuration matches their PCB and firmware requirements before committing to a design.

詢價 聯絡我們
STM8L151K6T6 - 16MHz 32KB 8-Bit MCU | STMicroelectronics
STM8L151K6T6

STM8L151K6T6 - 16MHz 32KB 8-Bit MCU | STMicroelectronics

STMicroelectronics STM8L151K6T6 is an ultra-low-power 8-bit EnergyLite microcontroller with a 16 MHz clock, 32 KB Flash memory, 2 KB RAM and a 32-pin LQFP 7 x 7 mm package. It operates from 1.8 V to 3.6 V according to the available specification data. The device belongs to the medium-density STM8L151x4/6 family, combining an economical 8-bit architecture with low-power-oriented embedded features for compact control systems. An 8-bit microcontroller is a microprocessor core integrated with Flash memory, RAM, timers, serial interfaces, GPIO and other peripherals on one semiconductor package. The STM8L family sits within the broader embedded-controller hierarchy: MCU → microcontroller → embedded processing IC → semiconductor. Its low-power positioning makes it useful where the system must continue monitoring or controlling sensors while limiting energy consumption between active operations. The verified feature set includes 16 MHz maximum clock speed, 32 KB of Flash organized as 32K x 8, 2 KB RAM, an 8-bit instruction set and a 32-pin LQFP package. One indexed source lists 41 I/O ports, although the exact pin names and exposed functions were not included in the supplied data. The LQFP-32 package provides a conventional surface-mount footprint with accessible leads, making the MCU suitable for compact control boards assembled with standard pick-and-place and reflow processes. The STM8L151x4/6 architecture is designed for embedded control rather than high-compute workloads. Its Flash memory supports firmware storage, while the 2 KB SRAM provides working memory for control logic, state variables and peripheral buffers. Operating at up to 16 MHz provides sufficient processing bandwidth for digital control, sensor aggregation, human-interface input, communication tasks and supervisory functions without requiring a higher-complexity MCU. Typical uses include low-power sensor controllers, compact industrial control modules, battery-operated instruments, LCD-oriented control panels, access-control terminals and small automation nodes. The 1.8 V minimum operating voltage supports low-energy system architectures, while the 3.6 V maximum accommodates conventional 3.3 V equipment when the designer applies suitable decoupling and verifies absolute maximum limits. Designers should preserve the STM8L151x4/6 power and peripheral configuration during firmware bring-up, including clock initialization, flash programming, GPIO assignment and low-power mode transitions. Component availability, complete electrical characteristics and exact pin functions should be confirmed against the current STMicroelectronics datasheet before a production layout is released. This product record combines verified distributor specifications, an official manufacturer resource, comparison data and engineering-oriented application guidance. It also distinguishes genuine package-compatible options from broader functional alternatives, helping procurement and design teams evaluate replacement risk without relying on part-name similarity alone.

詢價 聯絡我們