STM8L151G2U3TR - 16MHz 4KB Ultra-Low-Power MCU | STMicroelectronics
MPN: STM8L151G2U3TR ✓ 啟用中STM8L151G2U3TR 概覽
An ultra-low-power microcontroller is an embedded semiconductor designed to execute control tasks while minimizing energy consumption, especially during standby, sleep, and low-activity operating states. The STM8L family belongs to the broader hierarchy of embedded MCU, microprocessor, embedded controller, and energy-efficient semiconductor products. This positioning makes the STM8L151G2U3TR appropriate for compact battery-operated equipment where low supply voltage, limited board area, and deterministic embedded control are more important than high computational throughput.
The device combines a 16 MHz STM8 core with 4 KB of Flash memory and integrated EEPROM. Its operating voltage range of 1.65 V to 3.6 V supports low-energy embedded systems, while the 28-UFQFPN package limits PCB footprint to 4 x 4 mm. The active product status identifies it as a currently supported member of STMicroelectronics' STM8L low-density product range.
The STM8 architecture provides up to 16 MIPS at a 16 MHz clock, making the device suitable for compact control logic, peripheral management, and low-rate communications handling. Integrated EEPROM allows application-specific parameters, calibration values, or operating state to be retained in nonvolatile memory rather than being stored only in Flash. The exact RAM capacity, interface inventory, and detailed current-consumption figures should be confirmed from the manufacturer datasheet before final design release.
Typical applications include battery-powered sensor nodes, compact industrial control modules, low-energy monitoring equipment, small appliance controllers, and connected embedded accessories. The 1.65 V minimum operating voltage is particularly useful when the design must operate directly from a single-cell energy source or a regulated low-voltage rail. The small package also supports space-constrained boards without requiring a large leaded package.
Designers should confirm startup, reset, clock, decoupling, and programming requirements against the pin-description and application-information sections of the manufacturer datasheet. Keep the 4 x 4 mm UFQFPN layout, exposed-pad requirements, and assembly profile within the manufacturer's recommendations, and verify the complete peripheral configuration for the intended voltage and temperature range before committing the PCB.
This product page combines the manufacturer family information with distributor package, memory, voltage, lifecycle, and ordering details. It also organizes same-family replacement considerations, a parameter comparison, and practical guidance for firmware and PCB decisions that are not evident from a bare ordering code.
直接替換替代品,適用於 STM8L151G2U3TR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
STM8L151G2U6TR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM8L151G2U3TR 最大額定值與電氣特性
| Product Type | Ultra-low-power 8-bit microcontroller |
| Product Series | STM8L EnergyLite |
| CPU Core | STM8 8-bit core |
| Maximum CPU Frequency | 16 MHz |
| Maximum CPU Performance | Up to 16 MIPS at 16 MHz |
| Flash Program Memory | 4 KB (4K x 8 bits) |
| 工作電源電壓 | 1.65 V to 3.6 V |
| 封裝 | 28-UFQFPN, 4 x 4 mm |
| Total Terminal Count | 28 terminals |
| Package Body Dimensions | 4 x 4 mm |
| 安裝類型 | No-lead surface mount |
| Product Status | Active |
| Temperature Grade | Automotive grade |
| RoHS 狀態 | Compliant |
STM8L151G2U3TR 4 x 4 mm 腳位配置指南
STM8L151G2U3TR(4 x 4 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM8L151G2U3TR.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM8L151G2U3TR 適用於 6 應用s: Battery-Powered Sensor Nodes, Industrial Environmental Monitoring, Low-Energy IoT Accessories, Compact Appliance Controls, Portable Medical Accessories, Security and Access Control Modules.
Battery-Powered Sensor Nodes
The STM8L151G2U3TR fits compact battery-powered sensor nodes because its 1.65 V to 3.6 V operating range accommodates low-energy supply rails and its 4 x 4 mm 28-UFQFPN package limits board area. The 16 MHz STM8 core can handle sensor polling, threshold logic, state-machine control, and low-rate data preparation while the 4 KB Flash stores application firmware. Integrated EEPROM provides nonvolatile storage for calibration coefficients, counters, or configuration parameters. A sensor-front-end design should use the MCU to manage measurement sequencing and sleep between events, thereby reducing the energy burden associated with keeping the processor continuously active.
推薦
Industrial Environmental Monitoring
The STM8L151G2U3TR is suitable for industrial environmental-monitoring modules that combine sensing, local filtering, and configurable digital outputs. Its 16 MHz core provides up to 16 MIPS for measurement sequencing, data validation, and control logic, while 4 KB of Flash supports focused firmware rather than a large application stack. The 1.65 V minimum operating voltage supports integration with regulated low-voltage sensor rails, and the 28-UFQFPN package preserves space for dense instrumentation. Use the integrated EEPROM for calibration offsets and device history, and verify the exact operating-temperature grade and industrial qualification requirements for each deployment environment.
推薦
Low-Energy IoT Accessories
The STM8L151G2U3TR can serve as the local controller in a small IoT accessory that wakes periodically, checks inputs, and updates a compact communications interface. Its 1.65 V to 3.6 V supply range is useful for battery-derived systems, and the 16 MHz STM8 processor provides enough control throughput without requiring a higher-power application processor. The 4 KB Flash capacity favors tightly focused firmware, while integrated EEPROM can retain pairing data or configuration values. Because the MCU has limited program memory, communication buffering and feature complexity should be designed conservatively; confirm the required peripherals and memory balance before final firmware allocation.
推薦
Compact Appliance Controls
The STM8L151G2U3TR is appropriate for compact appliance controls where a small controller must coordinate buttons, indicators, actuators, and protection logic. The 16 MHz STM8 core can execute a deterministic control loop and peripheral service routine, while the 4 KB Flash footprint is sufficient for focused embedded firmware. Its 28-UFQFPN package, measuring 4 x 4 mm, supports dense control boards without dominating the enclosure. The 1.65 V to 3.6 V operating range allows operation from a suitable regulated rail, although motor, heater, or mains-connected sections must retain their required isolation and power-conversion circuitry.
推薦
Portable Medical Accessories
The STM8L151G2U3TR can support portable medical accessories when the product requires local control, low-voltage operation, and a compact controller rather than a high-performance processor. The device's 1.65 V to 3.6 V range supports energy-conscious designs, and the 16 MHz core can manage button input, status indication, timing, and accessory-specific control sequences. Integrated EEPROM is useful for retaining device settings or calibration-related values. The MCU is not itself a medical-safety certification, so medical applications require appropriate system-level validation, risk assessment, electrical isolation where applicable, and confirmation that the selected ordering grade satisfies the intended environmental requirements.
推薦
Security and Access Control Modules
The STM8L151G2U3TR fits compact access-control and security modules that manage local inputs, lock or relay control, status feedback, and event logic. Its 16 MHz processing rate supports responsive control code, while the small 28-UFQFPN footprint allows the controller to fit within compact door hardware. The 4 KB Flash limit favors a tightly scoped firmware image, and integrated EEPROM can retain configuration data. For powered installations, the 1.65 V to 3.6 V supply range can simplify integration with a regulated low-voltage rail. Security-critical implementations should add the appropriate authentication, tamper-response, and communications protections at the system level rather than relying on MCU selection alone.
推薦
推薦產品摘要
工程參考資料,適用於 STM8L151G2U3TR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM8L151G2U6TR |
|---|---|---|
| Package | 28-UFQFPN, 4 x 4 mm | 28-UFQFPN, 4 x 4 mm |
| Brand | STMicroelectronics | STMicroelectronics |
| CPU Architecture | 8-bit STM8 core | 8-bit STM8 core |
| Maximum CPU Frequency | 16 MHz | 16 MHz |
| Maximum CPU Performance | Up to 16 MIPS at 16 MHz | Up to 16 MIPS at 16 MHz |
| Flash Program Memory | 4 KB (4K x 8 bits) | 4 KB |
| Data EEPROM | Integrated | Integrated |
| Operating Supply Voltage | 1.65 V to 3.6 V | 1.65 V to 3.6 V |
| Product Series | STM8L EnergyLite | STM8L EnergyLite |
| Ordering Presentation | Tape and reel | Tape and reel |
主要差異化特點
- Compact low-voltage package (對比STM8L151G2U6TR)
- Processing capability within a small footprint (對比STM8L151G2U6TR)
- Integrated nonvolatile data storage (對比STM8L151G2U6TR)
設計說明
Treat the 28-UFQFPN as a fine-pitch no-lead assembly and follow the manufacturer's land-pattern and exposed-pad guidance exactly. Place decoupling capacitors close to the applicable supply pins, route the exposed pad to the required thermal and copper area, and inspect the assembly drawing for solderability and reflow constraints. Because the package is only 4 x 4 mm, courtyard, paste, and stencil design deserve review before prototype assembly.
Design the supply path for the documented 1.65 V to 3.6 V operating range and include local high-frequency bypassing near the MCU. Confirm regulator startup, reset release, and brownout behavior against the manufacturer requirements. For battery-powered designs, calculate average current from active and low-activity mode budgets rather than relying only on the 16 MHz operating frequency.
Do not substitute another STM8L151 density or package based on the family name alone. Verify pin compatibility, Flash capacity, RAM, EEPROM, peripheral mapping, supply limits, temperature grade, and qualification markings for the complete ordering code. A footprint match alone does not guarantee that firmware, startup code, peripherals, or memory requirements remain unchanged.
合規資訊
RoHS compliance is listed for the exact device. The distributor record identifies an automotive temperature grade, but AEC-Q100 qualification and other environmental or material compliance claims require confirmation from the manufacturer.