產品(44,000+)

SY87729LHY - 365MHz Fractional-N Clock Synthesizer | Microchip
SY87729LHY

SY87729LHY - 365MHz Fractional-N Clock Synthesizer | Microchip

Microchip Technology SY87729LHY is a 3.3V rate-independent fractional-N frequency synthesizer that generates a differential PECL reference from a single input source. The device covers a 10MHz to 365MHz output range and is supplied in a 32-pin TQFP package with an exposed pad. Verified distributor data identifies it as a clock synthesizer and jitter-cleaning device, while the manufacturer datasheet describes support for standards-compliant transport reference generation. A fractional-N synthesizer is a clock and timing IC that synthesizes programmable frequencies from a stable reference. Its hierarchy is fractional-N synthesizer > PLL-based clock generator > clock synthesizer > clock and timing IC > semiconductor. This technology is particularly useful when a system needs a precise communications reference without relying on a separate crystal oscillator for every output frequency. Differential PECL outputs provide complementary signals suited to high-speed digital clocking and optical-transponder systems. The SY87729LHY operates from a 3.3V supply and synthesizes frequencies from 10MHz to 365MHz using a single reference source. The verified search material specifically describes a 27MHz reference input and a maximum output of 365MHz. It generates the correct differential PECL reference required by the Micrel SY87721L combined clock-and-data-recovery and clock-multiplier-unit device, whose associated data rate range extends from 10Mbps to 2.7Gbps. Fractional-N synthesis permits accurate generation of transport-related reference frequencies with or without forward-error correction. This is valuable in systems requiring standards-compliant downstream data units even when the associated upstream interface produces no signal. Exact phase-noise, jitter, reference-input, output-frequency, and divider specifications are not included in the supplied excerpts and must be confirmed in the manufacturer datasheet before final timing-budget approval. Typical uses include optical transponders, SONET-compatible transport equipment, Ethernet-compatible clocking systems, and other communications links driven by the SY87721L. In these applications, the synthesizer establishes the local reference required by the downstream CDR/CMU, while the 365MHz upper output range provides headroom for demanding clock rates. Board-level signal integrity and differential clock routing remain essential because high-speed edge quality is not determined by output frequency alone. Designers should place the input, output, and bypass connections as shown in the manufacturer application guidance, maintain short return paths, and use controlled-impedance routing for differential PECL pairs. The exposed pad should be connected to the ground plane according to the datasheet thermal and layout instructions. Because detailed termination and decoupling values were not supplied here, those values must be taken directly from the SY87729L manufacturer datasheet rather than inferred. This product summary combines verified manufacturer and distributor information, pricing available as of 2026-10-28, same-family replacement information, and practical guidance for evaluating the SY87729LHY. It highlights where verified data is complete and marks unresolved electrical, environmental, pin-level, and lifecycle details rather than presenting unsupported assumptions as specifications.

詢價 聯絡我們
SY87739LHG - 729 MHz Fractional-N Synthesizer | Microchip Technology
SY87739LHG

SY87739LHG - 729 MHz Fractional-N Synthesizer | Microchip Technology

Microchip Technology SY87739LHG is a fractional-N frequency synthesizer designed for high-performance data transport systems, with a maximum output frequency of 729 MHz, PECL inputs and outputs, and a 32-TQFP-EP package measuring 7 x 7 mm. The device is assigned to the application-specific clock and timing category and supports Ethernet, Fibre Channel, SONET/SDH, and ATM clocking applications. A fractional-N frequency synthesizer is a clock-generation IC that uses a phase-locked loop to produce an output frequency derived from a reference clock. Its fractional division capability permits frequency synthesis between integer division ratios, making this device category useful when an exact output frequency is required without changing the external reference. In the system hierarchy, the SY87739LHG is a PLL-based clock synthesizer, a specialized member of clock and timing integrated circuits and a semiconductor. The key documented features are a maximum output frequency of 729 MHz, differential PECL input and output interfaces, a 1:1 input-to-output ratio, and operation from a 3.3 V supply identified in the available product data. The listed frequency range extends from 10 MHz to 729 MHz. Its differential clocking architecture is intended to support high-speed data transport systems where signal integrity and clock quality are important design considerations. The SY87739LHG belongs to Microchip Technology's AnyClock family and uses a fractional-N synthesis architecture. The available product listing identifies the PLL feature and one output circuit. The 32-pin TQFP package with an exposed pad provides a defined surface-mount footprint for equipment requiring high-frequency clock generation in a moderately compact package. Typical applications include Ethernet line cards, Fibre Channel systems, SONET/SDH transport equipment, ATM networks, and other high-performance data transport platforms. In these systems, the synthesizer can establish a required internal operating frequency from a stable reference while supporting high-speed differential clock distribution. Equipment designers should also account for reference quality, loop bandwidth, jitter, supply integrity, and output termination. A key design consideration is that the listed device status is obsolete. Existing equipment can continue to use the documented SY87739LHG configuration, but new designs should not assume current production availability. The 7 x 7 mm exposed-pad package also requires a PCB footprint and thermal design consistent with the manufacturer's package drawing, particularly when the adjacent circuitry or exposed pad is used for heat removal. This page combines the verified distributor and manufacturer-listing information with application guidance, lifecycle context, a specification-gap inventory, and transparent replacement analysis. Because the supplied cross-reference results identify search tools but do not name a verified pin-compatible substitute, it does not present unverified parts as drop-in replacements.

詢價 聯絡我們
SY87739LHI - 729MHz Fractional-N Synthesizer | Microchip
SY87739LHI

SY87739LHI - 729MHz Fractional-N Synthesizer | Microchip

Microchip Technology SY87739LHI is a protocol-transparent, 3.3 V fractional-N frequency synthesizer with one differential PECL output, an output-frequency range of 10 MHz to 729 MHz, and operation from a single 27 MHz reference source. The device is supplied in a 32-pin TQFP with exposed pad package, designated 32-TQFP-EP (7x7) by DigiKey. Its architecture provides rate-independent synthesis for communications equipment requiring exact frequencies associated with Ethernet, Fibre Channel, SONET/SDH, and ATM protocols. A fractional-N synthesizer is a clock-generation IC that derives an output clock from a stable reference while using fractional division to produce frequencies that are not limited to integer ratios of the reference. The SY87739LHI belongs to the broader clock and timing hierarchy: fractional-N frequency synthesizer, clock generator, timing IC, and integrated circuit. This makes it useful where a system requires a programmable or protocol-related clock while retaining the operational simplicity of a single-reference architecture. The primary electrical features include a 10 MHz to 729 MHz synthesis range, a maximum characterized output frequency of 729 MHz, one differential PECL output, and 3.3 V operation. A 27 MHz reference allows the synthesizer to generate exact frequencies used by common transport protocols, with or without forward-error correction. Protocol transparency is important because the generated frequency can follow the required clock relationship rather than being limited to a fixed integer divider ratio. The SY87739L integrates a complete rate-independent frequency-synthesis function in one IC. It is specified for Ethernet, Fibre Channel, SONET/SDH, and ATM clock-generation requirements, making it particularly relevant to optical transponders, line cards, clocking subsystems, and communications test equipment. Its differential PECL interface supports high-speed clock distribution, although board-level implementation still requires correct differential routing, controlled impedance, and power-supply decoupling. Typical uses include SONET/SDH transponder reference generation, Fibre Channel interface clocking, Ethernet equipment clock synthesis, ATM networking hardware, optical transport modules, and laboratory communication test systems. Designers should confirm that the selected output frequency, reference configuration, PECL termination, and thermal conditions match the exact datasheet operating requirements before releasing production hardware. PCB implementation requires careful treatment of the exposed pad and high-speed clock nets. The exposed pad should be connected to the ground plane through the manufacturer-recommended thermal-via pattern, while input, output, and supply connections should be kept short. PECL output biasing and any downstream termination must follow the reference circuit because incorrect termination can alter edge quality, current consumption, and clock amplitude. This product record combines the verified manufacturer and distributor data with practical selection criteria for protocol timing, package-aware alternatives, and implementation considerations. It highlights where verified electrical data is available and marks undisclosed electrical, lifecycle, pricing, and pin-level information explicitly rather than inferring values that are not supported by the supplied sources.

詢價 聯絡我們
SY87739LHY - 729MHz Fractional-N Synthesizer | Microchip
SY87739LHY

SY87739LHY - 729MHz Fractional-N Synthesizer | Microchip

The Microchip Technology SY87739LHY is a protocol-transparent fractional-N clock synthesizer that generates differential PECL output frequencies from 10MHz to 729MHz using a single 27MHz reference oscillator. The device is packaged in a 32-pin TQFP with exposed pad, providing one clock output and dedicated support for high-speed communication protocols. A fractional-N synthesizer is a phase-locked-loop timing device that derives an output frequency from a stable reference clock using programmable division ratios. The SY87739LHY belongs to the fractional-N synthesizer hierarchy, PLL-based clock generator family, and broader clock and timing IC category. Its protocol-transparent architecture allows a system to synthesize common data-transport reference rates without using a separate dedicated clock generator for every standard. The primary features include operation from a 3.3V supply, a 27MHz reference input, and output coverage extending to 729MHz. Two tandem PLL circuits provide the frequency synthesis functions: a modified fractional-N stage produces rational-ratio frequencies, while a second integer-ratio stage can adjust the resulting output. Differential PECL outputs are suited to high-speed optical, serial, and telecommunications systems requiring a low-noise clock reference. The device can generate exact reference frequencies used by common transport protocols, including configurations with or without forward error correction. The first PLL supports protocol rates except those containing FEC or digital-wrapper overhead, while the second PLL provides an additional output adjustment stage. This architecture offers design flexibility while preserving a single-reference-clock implementation, reducing the number of separate oscillator and divider chains required in a communication line card. Typical applications include Ethernet and Fibre Channel line interfaces, SONET/SDH/ATM transponders, optical communication modules, network timing subsystems, and high-speed serial backplanes. The 729MHz upper limit supports demanding serial links, while the 10MHz lower limit permits synthesis of lower-rate references for adjacent digital circuitry. PCB implementation should preserve short, impedance-controlled routes for the differential PECL clock outputs and provide a continuous ground reference beneath the exposed pad. Input and output return paths should avoid shared-current coupling with switching supplies. Decoupling capacitors should be placed directly across the device supply pins according to the manufacturer layout guidance, while the exposed pad requires thermal vias and adequate copper area. This page combines the manufacturer description with package, protocol, frequency, and sourcing details while separating engineering guidance from basic catalog data. It also identifies the verified pin-compatible family options and the unresolved qualification details that should be confirmed before production substitution.

詢價 聯絡我們
SY87813LHG - 3.3V Any-Rate 1.3Gbps CDR | Microchip
SY87813LHG

SY87813LHG - 3.3V Any-Rate 1.3Gbps CDR | Microchip

The Microchip SY87813LHG is a 3.3V any-rate clock and data recovery integrated circuit designed for NRZ data rates from 28Mbps to 1.3Gbps. It combines clock recovery and data retiming in a 32-pin TQFP package with an exposed pad. The device is identified by the Microchip Technology clock and timing product category and is listed as lead-free. A clock and data recovery IC, commonly called a CDR, is a timing integrated circuit that extracts or reconstructs a usable clock from a serial data stream and aligns the data for downstream processing. The CDR belongs to the broader clock and timing hierarchy, which includes clock buffers, clock generators, phase-locked loops, multipliers, and data-retiming devices. These circuits support the reliable transfer of high-speed information through serial communication, storage, networking, and test systems. The SY87813LHG supports an unusually broad 28Mbps-to-1.3Gbps operating range in a single device. Its any-rate architecture makes it useful when one board design must accommodate several serial link rates. The 3.3V supply requirement also simplifies power planning for conventional 3.3V digital systems. NRZ signaling compatibility is central to the device's ability to recover timing and retime data in high-speed serial paths. Technically, the SY87813LHG performs two related functions. Clock recovery separates timing information from the incoming data stream so that a stable clock can be reconstructed, while data retiming aligns the serial data with that recovered clock. This division of responsibility helps reduce accumulated timing uncertainty between transmitter and receiver. The combination is particularly valuable in links where source and destination circuits cannot share a sufficiently stable common clock. Typical applications include telecom and wireless communication equipment, SDH-based transport systems, network-interface equipment, optical-module electronics, and high-speed backplanes. A 1.3Gbps-capable CDR can also be evaluated for test and measurement systems, industrial control links, and embedded equipment that must recover clocking from received serial data. The exact interface standard and board-level signal integrity still require validation in the final system. A critical design consideration is that high-speed clock recovery depends on input signal quality as well as device capability. The data and clock inputs must be routed with controlled impedance, short return paths, and minimal discontinuity. Power and ground distribution must remain quiet because reference jitter and supply disturbance can affect recovery margin, especially when the installed link approaches the upper end of the supported range. This product page combines the identified electrical characteristics, package information, sourcing structure, and application guidance to help engineers evaluate the SY87813LHG for NRZ serial links. It also distinguishes verified component facts from design parameters that must be confirmed against the complete manufacturer datasheet and the specific channel implementation before layout release or production use.

詢價 聯絡我們
SY88803VKG - 155Mbps PECL Limiting Post Amplifier | Microchip
SY88803VKG

SY88803VKG - 155Mbps PECL Limiting Post Amplifier | Microchip

The Microchip Technology (formerly Micrel) SY88803VKG is a 3.3V/5V, 155Mbps PECL low-power limiting post amplifier with a TTL Loss-of-Signal (LOS) output, housed in a 10-pin MSOP package. It is designed specifically for fiber-optic receiver front ends that follow a transimpedance amplifier (TIA). A limiting post amplifier is the second stage in an optical receiver signal chain. The linear signal output from a TIA can contain significant amounts of noise and may vary widely in amplitude; a limiting amplifier converts this small, noisy differential signal into a clean, fixed-amplitude logic-level PECL data stream, restoring signal integrity before clock-and-data-recovery (CDR) circuitry. In the hierarchy of optical receiver electronics, it sits between the TIA and the CDR/serializer, and is a form of special-purpose high-speed amplifier IC. Key features include single 3.3V or 5V supply operation to 155Mbps, low-noise PECL differential data outputs, a chatter-free TTL Loss-of-Signal output, a TTL /EN enable input for power management, and a programmable LOS assertion threshold. Low power consumption suits compact optical modules such as OC-3/STM-1 and Fast Ethernet transceivers. Architecturally, the device uses a cascade of wideband differential gain stages with automatic offset compensation; the saturating output stages guarantee constant output swing regardless of input amplitude above sensitivity. The programmable LOS threshold lets designers match the trip point to the optical module sensitivity budget, and the chatter-free hysteresis design prevents false LOS toggling near threshold. Typical applications include 155Mbps fiber-optic receivers, SDH/SONET OC-3 line cards, Fast Ethernet (100Base-FX) optical modules, and industrial fiber links. It connects directly to typical TIAs, making it a drop-in signal-chain element. Design consideration: route the differential PECL outputs as 50-ohm controlled-impedance pairs and decouple the supply pins close to the package to keep jitter low; verify the LOS threshold setting against the TIA output amplitude range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
SY88903KC - 1.25Gbps Limiting Post Amplifier | Microchip
SY88903KC

SY88903KC - 1.25Gbps Limiting Post Amplifier | Microchip

The Microchip Technology SY88903KC is a 1.25 Gbps high-speed limiting post amplifier designed for fiber-optic receivers, operating from a single 3.3 V power supply in a 10-pin MSOP package. Its differential PECL inputs accept signals as small as 5 mVp-p and produce stable, limited-amplitude data for downstream PECL-compatible devices. A limiting post amplifier is a special-purpose amplifier that provides high gain and wide bandwidth near the output of an optical receiver. Unlike a linear amplifier, it restores a consistent digital output amplitude after the photodiode, transimpedance amplifier, and clock-recovery stages have introduced attenuation and noise. The SY88903KC is intended to work with the related SY88902 and SY88904 receiver functions. Principal features include operation to 1.25 Gbps, differential PECL data inputs, a TTL enable input, low-noise amplification, and chatter-free loss-of-signal generation. The open-collector TTL LOS output allows the receiver system to detect an absence of incoming optical signal without mistaking brief signal interruptions for a hard failure. Because the output is open collector, an external pull-up resistor is required when the LOS function is used. The SY88903KC uses PECL-compatible signaling at its data inputs and outputs, a common high-speed logic standard in optical transport systems where short signal excursions are easier to maintain than CMOS swings. Its limiting behavior supplies a consistent output level for controllers, serializers, and clock-and-data-recovery circuits. The single-supply architecture simplifies the design of line cards and optical transceiver modules, although the input and output biasing networks must follow the manufacturer's reference circuit. Typical uses include 1.25 Gbps SONET and related fiber-optic links, optical network transceivers, PON equipment, and clock-recovery subsystems. The IC is particularly appropriate where a weak received signal must be restored without adding excessive pattern-dependent jitter or requiring a separate linear gain stage. In implementation, preserve the high-speed differential trace geometry, keep PECL input and output connections short, and place the LOS pull-up resistor close to the open-collector pin. Confirm the receiver's data rate, common-mode voltage, termination scheme, and power sequencing against the manufacturer datasheet before releasing a production layout. This page consolidates verified manufacturer and distributor information, interface characteristics, application guidance, and practical implementation notes for engineers evaluating the SY88903KC in 1.25 Gbps optical receiver designs.

詢價 聯絡我們
SY88913KC - 1.25Gbps Limiting Post Amplifier | Microchip
SY88913KC

SY88913KC - 1.25Gbps Limiting Post Amplifier | Microchip

The Microchip Technology SY88913KC is a 1.25Gbps high-speed limiting post amplifier packaged in a 10-MSOP and intended for receive-chain signal conditioning. Its principal functions are high-speed limiting amplification and programmable loss-of-signal detection. The device includes an LOSLVL control that adjusts the level-detect threshold through a resistor divider connected between VCC and VREF, allowing the receiver to distinguish a valid signal from an absent or degraded input. According to the manufacturer datasheet, the detected state can be returned to the receiver's /EN input to help maintain system stability when the signal is lost. A limiting post amplifier is a signal-conditioning IC within the broader optical-communication receiver chain. It receives a high-speed data signal that has already been converted into an electrical signal, restores the waveform to suitable logic levels, and provides a predictable output suitable for driving downstream circuitry. Its 1.25Gbps headline data rate places it in the class of high-speed line-rate interface amplifiers rather than low-frequency audio or instrumentation amplifiers. The SY88913KC includes several implementation-critical features. Programmable level detection allows the loss-of-signal threshold to follow a particular optical receiver's sensitivity, power budget, and system noise conditions. The documented output termination requirement calls for a 50-ohm load connected to VCC minus 2V, or an equivalent Thevenin termination, which helps establish the correct high-speed output environment. The manufacturer also emphasizes that PCB layout strongly affects performance. The device is supplied in a compact 10-MSOP package and identified as a commercial-temperature ordering option. In a typical optical-module or telecommunications receiver design, the SY88913KC can sit after the photodiode or transimpedance stage and before a clock-and-data-recovery circuit, serializer, or digital decision circuit. Its role is to provide limiting amplification and loss-of-signal information rather than to perform clock recovery or decoding. Careful signal-integrity layout is essential when using this amplifier. High-speed traces should be short, impedance-controlled, properly terminated, and kept away from unrelated clocks and switching nodes. The input, output, supply, and reference connections should follow the manufacturer layout guidance. Because the device relies on a defined termination network and adjustable level-detect threshold, substituting components without comparing pin functions, supply requirements, threshold behavior, and output termination can alter receiver performance. This page consolidates the verified 1.25Gbps limiting-amplifier description, programmable loss-of-signal behavior, package information, sourcing details, and practical implementation considerations into one engineering-focused reference. It also identifies where verified replacement data and detailed electrical limits are unavailable so engineers can distinguish documented facts from parameters requiring confirmation in the manufacturer datasheet.

詢價 聯絡我們
SY88923KC - 2.5Gbps Limiting Post Amplifier | Microchip
SY88923KC

SY88923KC - 2.5Gbps Limiting Post Amplifier | Microchip

The Microchip Technology SY88923KC is a 2.5Gbps high-speed limiting post amplifier with differential PECL inputs, a TTL enable input, and an open-collector TTL loss-of-signal output. The device accepts signals as small as 5mVp-p and is supplied in a 10-MSOP surface-mount package. A limiting post amplifier is a high-speed amplifier that increases the amplitude of small received signals and limits their swing to produce logic-compatible levels. Within the optical-communications hierarchy, the SY88923KC belongs to the limiting amplifier class of high-speed amplifier ICs used after photodetectors in fiber-optic receivers. Its principal role is signal conditioning between an optical receiver front end and a PECL-capable digital logic device. Key features include operation at data rates up to 2.5Gbps, low-noise amplification, differential PECL signal inputs, a TTL/EN input, and chatter-free loss-of-signal generation. The post amplifier can drive devices with PECL inputs while providing a separate open-collector TTL indication when the received signal falls below the selected detection level. The programmable level-detect function supports receiver supervision in optical-network equipment. The SY88923KC operates from either 3.3V or 5V and uses a single power supply. Differential signaling reduces sensitivity to common-mode noise when routing the recovered signal through a high-speed printed circuit board. The limiting architecture is intended to provide compatible output levels while preserving operation at multi-gigabit line rates. Its small 10-MSOP package also makes it practical for compact transceiver and line-card designs. Typical applications include 2.5Gbps fiber-optic receivers, optical network terminals, optical network units, digital cross-connect systems, and other PECL-based communication equipment. The verified source information specifically identifies the SY88922 and SY88905 as devices designed to work with the SY88923 family. These relationships can support complete receiver signal-chain designs rather than using the post amplifier as an isolated component. When laying out the circuit, keep the differential PECL traces short, continuous, and impedance controlled, with close placement of the required bypass and termination components. Verify input common-mode voltage, output termination, loss-of-signal polarity, and enable-logic levels against the manufacturer datasheet. Because the available evidence does not provide a complete verified pin table, component tolerances, or full electrical tables, those values should be confirmed before layout release. This product record combines the verified 2.5Gbps, 5mVp-p, 3.3V/5V, PECL, LOS, and 10-MSOP information with lifecycle status, sourcing links, and explicit engineering cautions. It also distinguishes verified functions from unverified specifications and avoids presenting generic cross-reference tools as proof of a pin-compatible replacement.

詢價 聯絡我們
SY88927VKC - 2.5Gbps Differential Receiver | Microchip
SY88927VKC

SY88927VKC - 2.5Gbps Differential Receiver | Microchip

The Microchip SY88927VKC is a high-speed differential receiver designed for 2.5 Gb/s data rates and operation from a 3.3 V or 5 V supply. The device is offered in an 8-pin MSOP package measuring 3 mm wide and is identified as a 0-driver, 1-receiver interface IC. According to the manufacturer datasheet, the receiver supports frequencies up to 3.0 GHz and uses 100K ECL-compatible I/O. A high-speed differential receiver converts a complementary differential input into a single-ended logic output. In the signal-chain hierarchy, this device belongs to the receiver and transceiver class of interface ICs, which sits between the physical data link and the digital logic that consumes the recovered signal. Differential reception helps reject common-mode noise, while the short package and low-voltage operation suit compact, high-speed backplane, clock, and data-conversion systems. Key features include 2.5 Gb/s operation, a 3.0 GHz maximum frequency, internal 75K input pull-down resistors, and the ability to operate from either 3.3 V or 5 V. The output circuitry is ECL-compatible, and the manufacturer describes improved output waveform characteristics compared with earlier EL16V devices. These characteristics make the receiver useful where data must be restored cleanly at the end of a high-speed transmission path. The SY88927V family is designed for high-frequency sources rather than low-speed general-purpose serial links. Its receiver architecture is intended to minimize signal degradation between a transmitting device and the receiving logic. Because the part has no transmitter, the board must provide a separate differential source, such as a clock generator, serializer, FPGA output, or other high-speed transceiver. Typical applications include 2.5 Gb/s backplanes and point-to-point links, high-speed clock distribution interfaces, parallel-to-serial conversion systems, FPGA peripheral interfaces, and instrumentation that transfers high-frequency differential data. In these systems, controlled trace geometry, short connections, and proper termination are important because the usable performance depends on the complete source, transmission path, and receiving logic. When laying out a circuit, route the differential pair as a tightly coupled impedance-controlled pair and place the receiver close to the data source when practical. Follow the manufacturer pin and application guidance for bypass capacitors and unused input states. Confirm the interface voltage levels, termination method, and input polarity before committing the layout because the receiver output is designed around ECL-compatible signaling rather than generic CMOS levels. This page organizes the verified electrical ratings, package details, sourcing information, and engineering guidance for the SY88927VKC. It also identifies where replacement analysis requires additional manufacturer or distributor cross-reference information rather than treating electrically similar but mechanically different receivers as drop-in parts.

詢價 聯絡我們
SY88927VZC - 2.5Gbps Differential Receiver | Microchip | 8-SOIC
SY88927VZC

SY88927VZC - 2.5Gbps Differential Receiver | Microchip | 8-SOIC

The Microchip Technology SY88927VZC is a 2.5 Gbps high-speed differential receiver with a maximum operating frequency of 3.0 GHz, 3.3 V and 5 V supply options, and an 8-pin SOIC package. It accepts one differential input and provides a digital receiver output, making it suitable for high-speed backplanes, clock distribution, parallel-to-serial interfaces, and other systems requiring reliable conversion of small differential signals into a single-ended logic output. A high-speed differential receiver is an interface IC that compares a pair of complementary signals and produces a logic output representing their relative state. Differential signaling reduces sensitivity to common-mode noise, while the receiver restores a usable digital signal for the receiving logic. Within the broader semiconductor hierarchy, this device belongs to the interface IC family and functions as a high-speed signal-conditioning component rather than as a processor, memory device, or power converter. The SY88927VZC supports supply voltages from 3 V to 5.5 V, enabling operation in both 3.3 V and 5 V systems. Its maximum frequency is 3.0 GHz, while its nominal differential data rate is 2.5 Gbps. Internal 75 kΩ input pull-down resistors help establish a defined state when an input is open. The manufacturer also describes the device as a faster version of the SY100EL16V with 100K ECL-compatible I/O and improved output waveform characteristics. The receiver uses a differential input arrangement and a single-ended output. The datasheet identifies separate supply-related pins, including VBB, and states that VBB is suitable only as a bias because its current sourcing and sinking capability is limited. The VBB pin should be bypassed to the most positive supply with a 0.01 µF capacitor. Under an open-input condition, internal input clamps force the Q output low, providing defined behavior for an unconnected interface. Typical uses include clock and data recovery, high-speed backplane communication, telecommunications equipment, parallel data buses, and test and measurement systems. The receiver is particularly useful when a transmitter sends a low-amplitude differential pair over a cable, PCB trace, or connector and the receiving logic requires a single-ended digital signal. Its 3.0 GHz maximum frequency provides additional timing margin for systems operating at the 2.5 Gbps nominal data rate. PCB implementation requires short, geometry-controlled differential traces, solid reference planes, and close decoupling of the supply pins. Input and output return paths should avoid discontinuities that create impedance mismatches and reflections. The receiver should be placed near the connector or transmitter when trace length, loss, and crosstalk would otherwise degrade the differential signal. Use the manufacturer pin-description and layout guidance when assigning tracks and connecting bypass capacitors. This product page combines the device's interface characteristics with practical application analysis, sourcing guidance, verified source links, and an explicit comparison of the available drop-in alternatives. The comparison also distinguishes electrical interchangeability from mere package similarity, helping engineers determine whether a proposed substitute preserves both the 8-SOIC footprint and the relevant high-speed receiver behavior.

詢價 聯絡我們
SY88927VZG - 2.5Gbps Differential Receiver | Microchip Technology
SY88927VZG

SY88927VZG - 2.5Gbps Differential Receiver | Microchip Technology

The Microchip Technology SY88927VZG is a 2.5 Gbps high-speed differential receiver designed for 3.3 V or 5 V operation in an 8-pin SOIC package. It accepts a differential high-speed input and produces a PECL-compatible output suitable for clock recovery, signal conditioning, telecommunications, and data-processing interfaces. Its 2.5 Gbps data rate supports demanding serial links operating well below the receiver’s stated performance ceiling. A high-speed differential receiver is an interface IC that converts a small differential signal into a single-ended, logic-compatible output. Differential signaling reduces sensitivity to common-mode noise because the receiver evaluates the voltage difference between two conductors. The receiver category belongs to the broader hierarchy of differential receivers, line receivers, interface ICs, and semiconductors, serving as the input stage between high-frequency signal sources and downstream digital or analog circuitry. The principal features include a 2.5 Gbps maximum data rate, support for both 3.3 V and 5 V supplies, differential input operation, and an 8-SOIC package. The SY88927V is described as functionally equivalent to the EL16V family while providing higher performance capability and faster output transition times. Those characteristics make it suitable for high-frequency sources requiring short transition times and deterministic signal propagation. The receiver architecture converts the differential input into a single-ended output that can be referenced to an appropriate bias network. The output arrangement supports single-ended use or use as a DC bias for AC-coupled downstream circuits. Because high-speed PECL signaling uses common-mode voltage conventions, correct supply voltage, termination, biasing, and signal-plane geometry are essential to maintain output levels and minimize reflections. Typical applications include 2.5 Gbps backplane links, telecommunications clock distribution, parallel-to-serial conversion systems, high-speed data acquisition, and clock recovery circuits. It can also serve in test equipment and optical-communication interfaces where a differential signal must be converted into a high-speed logic output before further processing. Designers should place the receiver close to the signal source and use controlled-impedance routing with short differential traces. Power and ground connections must be decoupled locally, while unused inputs and outputs require the handling specified by the manufacturer datasheet. System timing and AC-coupling components should be evaluated together so that the complete receiver chain remains compatible with the 2.5 Gbps operating requirement.

詢價 聯絡我們
SY89112UMG - 3GHz 2:12 Clock Buffer | Microchip Technology
SY89112UMG

SY89112UMG - 3GHz 2:12 Clock Buffer | Microchip Technology

The Microchip Technology SY89112UMG is a 2:12 clock fanout buffer and multiplexer with a maximum operating frequency of 3 GHz, supplied in a 44-VFQFN exposed-pad package with a 7 mm by 7 mm surface-mount footprint. It belongs to the Precision Edge family of clock and timing devices. A clock fanout buffer is a clock-and-timing IC that receives one or more high-speed clock signals and reproduces them across multiple outputs. Its position in the hierarchy is clock buffer and fanout driver, then clock distribution device, then clock and timing IC. By consolidating clock distribution into one device, the SY89112UMG can reduce duplication in systems where a source clock must reach several serializers, transceivers, processors, or data-conversion circuits. The principal feature of the SY89112UMG is its 2:12 fanout ratio, supported by a 3 GHz operating frequency. The device accepts input signals compatible with CML, LVDS, and LVPECL interfaces, making it suitable for systems that distribute high-speed differential clock signals between integrated circuits. Its core supply operating range is 2.375 V to 3.6 V, while its specified operating temperature range is -40 degrees Celsius to 85 degrees Celsius. The 44-MLF package uses an exposed pad for surface mounting and heat removal. This arrangement supports compact layouts in telecommunications, networking, and high-speed computing equipment. Because the device operates at multi-gigahertz rates, controlled impedance routing, short clock traces, and a low-noise supply connection are central to achieving reliable signal integrity. Typical uses include 1G network-interface clock distribution, backplane clock fanout, high-speed computing clock trees, and clock routing into communications transceivers. The SY89112UMG is especially relevant where one differential clock source must feed multiple downstream circuits without duplicating output-driver circuitry across the board. Designers should treat the exposed pad as a thermal and electrical connection, follow the manufacturer pin-assignment table when routing inputs, outputs, supply, and ground, and maintain the specified supply range. PCB placement should minimize the distance between clock outputs and their receiving circuits so that edge degradation from board loss and crosstalk remains under control. This page organizes the device specifications, interface capabilities, application fit, package constraints, and engineering considerations in one reference. It also separates confirmed device data from unknown values and identifies where a manufacturer datasheet or direct engineering confirmation is required before layout release or production sourcing.

詢價 聯絡我們
SY89112UMY - 12-Output 3 GHz LVPECL Clock Buffer | Microchip
SY89112UMY

SY89112UMY - 12-Output 3 GHz LVPECL Clock Buffer | Microchip

The Microchip Technology SY89112UMY is a low-jitter, low-skew, high-speed LVPECL clock fanout buffer with a 1:12 differential fanout ratio and a 2:1 input multiplexer, supplied in a 44-pin VFQFN package with an exposed pad. It supports clock frequencies up to 3 GHz and operates from 2.5 V or 3.3 V supplies. The device distributes one selected differential clock to 12 outputs while supporting clock switchover between two input sources. A clock fanout buffer is a digital integrated circuit that reproduces a high-speed clock signal across multiple outputs. Clock buffers and drivers belong to the broader clock and timing IC family, where low jitter, low skew, deterministic propagation delay, and controlled output impedance determine whether timing relationships remain usable at system level. The SY89112UMY combines this distribution function with an integrated 2:1 multiplexer, reducing the need for separate switching components in redundant-clock and source-selection architectures. Its principal advantages are the 3 GHz maximum clock rate, 12 differential LVPECL outputs, and low-jitter, low-skew operation. The internal input termination and 2:1 multiplexer make the device suitable for systems that must switch between primary and backup clock sources. LVPECL outputs support high-speed point-to-point links over controlled-impedance interconnects, while low output jitter helps preserve timing margins in telecommunications, enterprise server, and other precision clock-distribution systems. The SY89112UMY is intended for telecom infrastructure, enterprise servers, network equipment, high-speed backplanes, and other systems requiring multiple synchronized LVPECL clock outputs. Differential routing between the buffer outputs and receivers is important because equal-and-opposite signals improve noise rejection and reduce susceptibility to common-mode interference. Board designers must also treat the exposed pad as a thermal and electrical feature rather than an unused lead. A key design consideration is transmission-line control. When connected to short PCB traces, the buffer still requires appropriate source and receiver termination to establish the intended LVPECL voltage and current. Longer interconnects should be routed as controlled-impedance differential pairs, with return-path continuity maintained through adjacent ground references. Decoupling, input reach, output isolation, and clock-switchover control must be evaluated together to avoid introducing excessive jitter or crosstalk. This product page combines the verified manufacturer identity and distributor descriptions with practical clock-distribution guidance. It also separates documented characteristics from parameters that require confirmation in the manufacturer datasheet, helping engineers evaluate SY89112UMY for high-speed telecom, server, and network-clock applications without assuming unsupported electrical or timing details.

詢價 聯絡我們
SY89113UMG - 1:12 LVDS Fanout Buffer | Microchip Technology
SY89113UMG

SY89113UMG - 1:12 LVDS Fanout Buffer | Microchip Technology

Microchip Technology SY89113UMG is a 1 GHz clock fanout and distribution IC with a 2:1 input multiplexer, twelve low-voltage differential-signaling outputs, and internal termination in a 44-VFQFN exposed-pad package. It is designed to distribute one selected differential clock across twelve outputs while supporting multiple source formats. A clock fanout buffer is a clock-and-timing integrated circuit that replicates a reference signal to multiple destinations. Its position in the hierarchy is clock buffer, then clock buffer or line driver, then clock-and-timing IC, and finally semiconductor. By separating source selection from distribution, the SY89113UMG can reduce clock-tree loading, support redundant clock sources, and provide consistent edge-driven signals across a complex system. Principal features include a maximum operating frequency of 1 GHz, a 2:1 input multiplexer, twelve LVDS outputs, internal termination, and support for CML, CMOS, HSTL, LVPECL, LVDS, and TTL input styles. The 44-MLF package is identified as a 44-VFQFN with an exposed pad. This combination makes the device applicable to precision telecom, enterprise-server, and other high-speed clock-distribution systems. The architecture accepts two clock inputs and selects one for distribution to twelve LVDS outputs. Internal termination is useful when the receiving network requires controlled source impedance, while the fanout function isolates the selected source from downstream clock-tree loading. The exposed pad provides a direct thermal path to the PCB, but its effectiveness depends on the implemented copper area, via pattern, and ambient conditions. Typical uses include telecom backplane clock distribution, enterprise-server clock trees, network-interface clocking, and data-conversion systems requiring twelve outputs. In these applications, the 1 GHz operating limit, input-format flexibility, and twelve-output architecture can simplify topology planning while maintaining deterministic clock routing across multiple loads. Designers should preserve controlled-impedance routing for LVDS pairs, connect the exposed pad to a thermal and ground plane with an appropriate via array, and verify input termination, output mapping, and mux polarity in the manufacturer pin-description table. Differential trace geometry and return-path continuity are especially important because discontinuities can increase edge jitter and radiated emissions. This page combines the principal operating characteristics, application-specific engineering guidance, a parameter comparison, and the qualified cross-reference identified for the SY89113UMG. These resources help engineers evaluate clock-tree architecture, PCB implementation, and device interchangeability before committing a design to production.

詢價 聯絡我們
SY89113UMY - 1:12 LVDS Clock Fanout Buffer | Microchip
SY89113UMY

SY89113UMY - 1:12 LVDS Clock Fanout Buffer | Microchip

The Microchip Technology SY89113UMY is a 2.5 V low-jitter, low-skew 1:12 LVDS fanout buffer with a 2:1 input multiplexer, operating up to 1 GHz in a 44-MLF package with an exposed pad. It accepts two selectable clock inputs and distributes one selected clock across 12 LVDS outputs, providing switchover capability and high fanout in a compact package. A clock fanout buffer is a digital interface device that reproduces one input clock to multiple outputs while preserving signal timing relationships. The SY89113UMY belongs to the clock-buffer hierarchy, combining clock distribution, a 2:1 multiplexer, differential LVDS I/O, and internal input termination in one device. These functions are useful when a system must route a clock locally, isolate multiple destinations, or support redundant clock-source selection. The device provides a 1:12 fanout ratio, a 2:1 input multiplexer, and operation up to 1 GHz. Differential LVDS clocking reduces sensitivity to noise compared with single-ended distribution when the circuit is implemented with controlled impedance, short traces, and appropriate termination. The input mux permits a design to select between two clock sources, while the 12 outputs can feed multiple destination circuits from a common distribution point. The SY89113UMY operates from a 2.5 V supply, making it suitable for systems using a dedicated 2.5 V clock domain. Its specified low-jitter and low-skew characteristics are particularly relevant to communication, server, and test systems where timing consistency between distributed clocks affects data integrity, sampling margins, and clock-domain reliability. Typical uses include server backplane clock distribution, telecommunications equipment clock routing, high-speed backplane fanout, and test-and-measurement systems requiring selectable clock sources. In a switchover design, the two mux inputs can be driven by redundant clocks, with the selected source distributed to 12 endpoints. The exposed-pad package also provides a direct thermal path when the device operates in a high-density system. PCB implementation requires careful attention to differential impedance, return paths, input termination, and output routing. Place the decoupling capacitor close to the supply pin, connect the exposed pad to the appropriate ground plane using the manufacturer’s thermal and layout guidance, and avoid adding excessive stubs to clock outputs. The full pin assignment and layout guidance should be taken from the pin-description table and application diagrams in the manufacturer datasheet. This page combines the device’s stated architecture and operating characteristics with package details, sourcing guidance, drop-in replacement analysis, comparison parameters, and practical implementation notes. It is intended to help engineers determine where the SY89113UMY fits in a clock-distribution design and which compatibility checks must be completed before substituting another part.

詢價 聯絡我們
SY89200UMI - 1:8 LVDS Clock Fanout Buffer | Microchip
SY89200UMI

SY89200UMI - 1:8 LVDS Clock Fanout Buffer | Microchip

The Microchip Technology SY89200UMI is an ultra-precision 1:8 LVDS clock fanout buffer with three selectable divide-by-1, divide-by-2, and divide-by-4 clock output banks, operating with clocks up to 1.5 GHz. It accepts CML, LVDS, and PECL inputs and is packaged in a 32-VFQFN exposed-pad package measuring 5 x 5 mm. A clock fanout buffer is a timing IC that receives one high-speed clock and generates multiple buffered outputs, reducing timing skew, loading, and crosstalk between clock-consuming circuits. The SY89200UMI belongs to the clock-buffer, driver, and clock-distribution hierarchy within clock-and-timing ICs. Its integrated divider and fanout functions allow a single source to feed several communications channels without using separate divider and buffer chains. The principal features are an 8-output architecture at up to 1.5 GHz, three independently organized divide-by-1, divide-by-2, and divide-by-4 output banks, LVDS-compatible outputs, and operation from a 2.375 V to 2.625 V supply. Differential clock handling supports noise immunity in high-speed serial links, while the buffered outputs help isolate each destination from the others. The -40°C to +85°C operating range suits industrial and communications equipment. Internally, the device combines an integrated clock divider with a low-voltage differential-signaling fanout stage. Distributing one clock through a dedicated fanout buffer limits the load presented to the clock source, reduces duty-cycle distortion, and keeps output-to-output timing variation controlled. The exposed pad provides a thermal and electrical return path when the package is soldered to a properly designed ground plane. Typical applications include telecommunications backplanes, serial transceivers, parallel-to-serial conversion equipment, clock recovery systems, and high-speed network interfaces. It is particularly useful when several lanes require related but differently divided clocks for parallel and serial data-processing stages. When laying out the board, treat all clock inputs and LVDS outputs as high-speed differential nets, keep the exposed pad tied to ground, and follow the manufacturer's input, output, and bypass-capacitor recommendations. Decoupling capacitance should be placed close to the supply pins, and unused outputs should be terminated according to the manufacturer's guidance to avoid unwanted reflections.

詢價 聯絡我們
SY89202UMI - 1:8 1.5 GHz Clock Buffer | Microchip Technology
SY89202UMI

SY89202UMI - 1:8 1.5 GHz Clock Buffer | Microchip Technology

Microchip Technology SY89202UMI is a 1:8 clock fanout buffer, divider, and multiplexer IC operating up to 1.5 GHz in a 32-pin VFQFN package with an exposed pad. The device uses a differential input architecture and can accept AC- or DC-coupled signals as small as 100 mV, equivalent to 200 mVpp, without an external termination resistor network. Its eight outputs use 800 mV LVPECL-compatible signaling with rise and fall times guaranteed below 220 ps, making the device suitable for demanding clock-distribution networks. A clock fanout buffer is a timing-device class that replicates one input clock across multiple outputs while controlling skew and jitter. Clock buffers can also support frequency division and multiplexing when the required configuration permits it. Within the broader hierarchy, the SY89202UMI belongs to the clock buffer and driver category, which falls under clock and timing integrated circuits. Its primary role is to distribute a high-speed differential clock to multiple loads without routing every branch directly from the clock source. The 1:8 fanout ratio allows a single differential source to feed eight output branches, reducing the number of separate external buffer channels required in a high-speed system. The 1.5 GHz operating capability supports demanding communications, networking, test-and-measurement, and data-processing equipment. The exposed pad provides a thermal and electrical connection to the PCB copper area, which is important when distributing a fast-edge signal across a 32-pin surface-mount footprint. The input termination architecture accepts either AC- or DC-coupled signals without placing termination components in the main signal path. This simplifies source interfacing while preserving low-amplitude operation. Output rise and fall times below 220 ps help maintain useful timing margin in systems with short clock periods. Differential clock distribution can also reduce sensitivity to common-mode noise when the source and receiving circuits are designed for matched differential operation. Typical uses include server and network-interface clock distribution, backplane clock fanout, high-speed test equipment, telecommunications line cards, and FPGA or ASIC clock trees. In an FPGA design, the buffer can provide isolated branch clocks while limiting fanout loading on the source. In a communication card, it can distribute a common reference or recovered clock across multiple parallel processing channels. Layout is critical because fast edges and differential clock signals can produce reflections, crosstalk, and supply-dependent timing errors. Route the differential pair over a continuous reference plane, use symmetrical geometry, minimize stubs, and provide a solid ground path. Decoupling should be placed close to the supply and ground pins. Review output spacing, return paths, and layer transitions in the manufacturer’s recommended layout before releasing the PCB. This product page consolidates the device’s clock ratio, frequency, signaling, package, lifecycle, and replacement information with practical guidance for differential routing and thermal design. It also distinguishes verified functional equivalents from broader component-level alternatives so engineers can assess compatibility before changing an existing 32-pin layout.

詢價 聯絡我們
SY89218UHY - 1.5GHz LVDS Clock Fanout Buffer | Microchip
SY89218UHY

SY89218UHY - 1.5GHz LVDS Clock Fanout Buffer | Microchip

The Microchip Technology SY89218UHY is a 2.5V precision, high-speed integrated clock divider and LVDS fanout buffer capable of handling clocks up to 1.5 GHz. It provides 15 LVDS outputs from two inputs, four independently controlled phase-matched output banks, and selectable divide-by-1, divide-by-2, or divide-by-4 clock ratios in a 64-pin TQFP package with an exposed pad. This architecture suits communications equipment requiring centralized clock distribution, selectable fanout, and differential output stages. A clock fanout buffer is a clock-management IC that receives one or more timing references and reproduces them across multiple outputs. Its role within the clock and timing hierarchy is to increase fanout capacity, preserve signal phase and timing quality, and distribute clocks to downstream logic. An LVDS clock buffer uses low-voltage differential signaling to provide robust, low-noise transmission between circuit sections while suppressing common-mode noise on PCB interconnects. The SY89218UHY integrates a 2:1 input multiplexer, four independently controlled output banks, and 15 LVDS outputs. Divide ratios of 1, 2, and 4 allow one reference clock to generate multiple related timing domains. The four banks are phase matched, helping maintain deterministic relative timing among output groups. The 2.5V supply operation is suitable for compact communications systems where a dedicated low-voltage clocking rail is available. The device can handle input clocks up to 1.5 GHz and provides the fanout needed for parallel links, backplanes, network-interface electronics, and test equipment. Dividing a high-frequency reference before distribution reduces the rate presented to selected downstream circuits while pass-through banks retain the original clock rate. Separate bank control allows different clocking paths to be configured according to system timing requirements. Use a 64-pin TQFP footprint with an exposed pad and follow the manufacturer's pin-description table when assigning signals. The exposed pad must be connected to the appropriate ground plane, and supply and ground connections should be placed to minimize return-path impedance. LVDS clock pairs require matched routing, with each differential pair kept electrically consistent across PCB layers. The principal design trade-off is flexibility versus control complexity. Fifteen outputs and four configurable banks simplify multi-destination clock distribution, but every output bank and divider mode must be coordinated with the system clock tree. Validate output timing, reference-clock jitter, return loss, and downstream receiver margins across all supported divider configurations. This product guide combines the device architecture with practical guidance on clock routing, divider configuration, differential-pair layout, exposed-pad grounding, and application selection. It also distinguishes the electrical function of the SY89218UHY from its ordering and packaging variants, helping engineers evaluate it against precision clock-fanout requirements without relying on a raw distributor listing alone.

詢價 聯絡我們
SY89221UHY - 2 GHz 2:15 LVPECL Clock Buffer | Microchip
SY89221UHY

SY89221UHY - 2 GHz 2:15 LVPECL Clock Buffer | Microchip

The Microchip Technology SY89221UHY is a 2 GHz, 2:15 precision clock fanout buffer, divider, and multiplexer IC with 15 LVPECL outputs in a 64-pin TQFP exposed-pad package. It operates from 2.5 V or 3.3 V and accepts differential clock inputs with phase-matched output banks configurable for pass-through, divide-by-2, or divide-by-4 operation. The SY89221UHY is designed for high-speed communications systems requiring accurate clock distribution and flexible frequency generation. A clock fanout buffer is a clock-and-timing IC that receives one or more high-speed clock signals and reproduces them across multiple low-skew output channels. Within the broader semiconductor hierarchy, this device combines a clock buffer, frequency divider, multiplexer, and LVPECL interface into one integrated timing component. Such consolidation reduces the number of separate clock-distribution stages while preserving predictable phase relationships between output banks. The SY89221UHY supports clocks up to 2 GHz and provides 15 LVPECL outputs organized into independently controlled output banks. Its four output banks can be configured for pass-through, divide-by-2, or divide-by-4 clock ratios. Differential input termination accepts AC-coupled or DC-coupled sources, including signals as small as 100 mV, or 200 mV peak-to-peak, without requiring an external termination-resistor network in the signal path. Micrel's three-pin differential input architecture is a central implementation feature of the device. It allows the clock source to connect directly to the differential input structure while supporting very small input amplitudes. The low-skew, low-jitter LVPECL outputs use fast transition rates suited to high-speed serial links, test equipment, optical-network infrastructure, and other communications timing systems. The exposed pad provides the package with a thermal conduction path for power dissipation. Typical applications include telecommunications backplanes, serial-interface clock distribution, network equipment, high-speed test and measurement systems, and communications modules requiring multiple related clocks. The integrated divider and multiplexer functions are particularly useful when a system needs both divided and pass-through clocks distributed across several LVPECL destinations. When designing around the SY89221UHY, preserve the differential input topology and controlled impedance of the clock traces. Treat the 64-pin TQFP exposed pad as a thermal and layout feature rather than an optional mechanical detail, and consult the manufacturer pin-description table when assigning every signal. Validate output timing, divider configuration, and termination at the intended operating frequency rather than relying only on nominal rise and fall-time specifications. This product data combines the Microchip product description, manufacturer-hosted family datasheet, distributor part identification, and package information into an engineering-oriented overview. It also identifies the practical limits of the available drop-in options, distinguishes documented functionality from parameters requiring design verification, and provides application and layout guidance for evaluating the SY89221UHY in high-speed clock architectures.

詢價 聯絡我們
SY89228UMG - 1.5 GHz LVPECL /3 /5 Clock Divider | Microchip
SY89228UMG

SY89228UMG - 1.5 GHz LVPECL /3 /5 Clock Divider | Microchip

Microchip Technology SY89228UMG is a precision LVPECL clock divider with a maximum input frequency of 1.5 GHz, one clock input, and one clock output. It divides an incoming differential clock by either 3 or 5 and is packaged in a 16-pin VFQFN exposed-pad package for compact, high-speed circuit implementations. A clock divider is a timing semiconductor that creates a lower-frequency clock from a higher-frequency reference. Within the broader hierarchy of clock and timing integrated circuits, the SY89228UMG combines frequency division, differential clocking, fail-safe input behavior, and internal input termination. These functions support systems that require a stable divided clock while retaining the edge-rate and phase characteristics expected from LVPECL signaling. The principal identified features include selectable divide-by-3 and divide-by-5 operation, LVPECL output signaling, fail-safe input support, and internal termination. The device operates from a 2.5 V supply, with a listed operating range of 2.375 V to 3.6 V. Its 16-VFQFN exposed-pad construction supports compact layouts while providing a dedicated thermal and electrical connection beneath the package. The SY89228UMG uses one differential clock input and produces one LVPECL clock output. Its 1.5 GHz maximum clock frequency makes it relevant to telecommunications, data-communication, networking, and test-equipment clock trees where a high-speed reference must be divided before distribution. The fail-safe input characteristic is particularly useful when the source may become absent, invalid, or electrically uncertain. Internal termination simplifies input implementation by reducing the need for additional source-termination components. Typical uses include parallel processing clock distribution, serializer and deserializer timing, network-interface clock division, and instrumentation requiring a divided low-noise differential clock. In a practical design, the input must be connected as a proper LVPECL interface, the supply and ground planes must be referenced correctly, and the exposed pad must be tied to the ground plane using the manufacturer’s recommended land pattern. A key design consideration is that the SY89228UMG is a clock divider, not a clock generator or jitter-cleanup device. The input waveform, duty cycle, amplitude, and source impedance determine edge quality at the divider. Because the output is LVPECL, downstream receivers must use compatible termination and voltage-bias arrangements rather than single-ended CMOS inputs. This page consolidates the manufacturer-related product information, package details, sourcing guidance, and design considerations into a compact engineering reference. It also distinguishes verified device facts from attributes that require confirmation from the full manufacturer datasheet before layout, simulation, or production release.

詢價 聯絡我們
SY89295UMG - 1024-Tap Programmable Delay Line | Microchip
SY89295UMG

SY89295UMG - 1024-Tap Programmable Delay Line | Microchip

The Microchip Technology SY89295UMG is a 1024-tap digitally programmable delay line with a 3.2 ns to 14.8 ns delay range and 10 ps control resolution. It operates from a 2.5 V ±5% or 3.3 V ±10% supply and is specified for use with LVPECL signals in a 32-pin VFQFN package with an exposed pad. The device supports signal rates up to 1.5 GHz. A programmable delay line is a clock-and-timing semiconductor that delays a digital waveform under control of an external digital interface. It belongs to the timing IC hierarchy, where delay lines provide adjustable phase alignment, clock de-skewing, data recovery, and deterministic timing compensation. The SY89295UMG combines wide adjustment range with fine 10 ps increments, allowing calibration across multiple boards or subsystems without replacing the component. Key features include 1024 programmable taps, a total delay range of 3.2 ns to 14.8 ns, and 10 ps delay resolution. The LVPECL interface supports high-speed data-center, telecommunications, and industrial timing systems, while the dual 2.5 V and 3.3 V supply options simplify interface design. The manufacturer specifies operation across the industrial temperature range from -40°C to +85°C. The architecture uses a digital control input to select the required delay state while passing the input signal through an adjustable delay path. Because the delay is electronically selectable rather than fixed, engineers can implement power-up calibration, periodic alignment, or production compensation routines. The 1.5 GHz signal capability makes the part suitable for clock distribution, serial-link timing adjustment, and skew management where board-level propagation differences must be corrected. Typical applications include high-speed optical-transport equipment, telecommunications line cards, parallel and serial data converters, network-timing equipment, and industrial instrumentation. It can also be used in clock-generation systems where a downstream interface requires a controlled phase offset relative to a reference clock. PCB implementation requires careful high-speed routing and a low-impedance return path. Place decoupling capacitors close to the supply pins, connect the exposed thermal pad to a properly sized ground plane, and route the LVPECL clock or data path away from high-current switching nodes. Differential pair geometry and controlled impedance are important when the delay line participates in a high-speed clock network. This product page combines the manufacturer specifications, package details, application guidance, and verified drop-in alternatives. It also provides practical PCB, timing, and signal-integrity considerations that help engineers evaluate the SY89295UMG before integrating it into a precision timing design.

詢價 聯絡我們
SY89295UMI - 1024-Tap Precision Delay Line | Microchip Technology
SY89295UMI

SY89295UMI - 1024-Tap Precision Delay Line | Microchip Technology

The Microchip Technology SY89295UMI is a programmable precision delay-line integrated circuit with 1024 taps, a selectable total-delay range of 3.2 ns to 14.8 ns, and operation from 2.5 V or 3.3 V. The device is housed in a 32-VFQFN exposed-pad package identified as the 5 mm by 5 mm 32-MLF package. Its principal function is to provide controlled propagation delay for clock, data, and pulse-alignment circuits. A programmable delay line is a timing integrated circuit that provides multiple evenly spaced delay taps along a signal path. By selecting one of the available taps, a designer can shift a digital signal by a controlled interval. In the system hierarchy, the SY89295UMI is a delay-line IC, a clock-and-timing component, and a semiconductor used for signal-delay management. It is particularly useful where one signal must be aligned with another without changing the clock source or redesigning the surrounding digital logic. The defining feature of the SY89295UMI is its 1024-tap architecture. A large tap count provides fine-grained delay selection, while the 3.2 ns to 14.8 ns range supports precision timing adjustments. The 2.5 V and 3.3 V operating options make the device relevant to compact, high-speed electronic systems where controlled delay, compact packaging, and direct digital control are important design objectives. From an architectural perspective, the part combines a programmable delay path, selectable output taps, and a small exposed-pad package. The exposed thermal pad supports heat transfer from the IC into the PCB, although final thermal performance depends on copper area, airflow, ambient temperature, and switching activity. The manufacturer datasheet remains the controlling reference for pin assignments, propagation-delay limits, input-output characteristics, control logic, and recommended application circuits. Typical uses include clock-deskew circuits, data alignment, pulse-width timing, phase adjustment, synchronous-interface conditioning, and laboratory or communications equipment. In these applications, the delay line allows an engineer to compensate for unequal trace, connector, or component propagation delays. It can also create deliberate timing offsets for testing clock domains or synchronizing sampled data. A critical design practice is to route the device as a high-speed, controlled-impedance network. Keep tap connections short, provide solid ground and power planes, and follow the manufacturer’s recommended decoupling and layout guidance. Because signal integrity, supply return current, and parasitic capacitance can affect edge behavior, PCB stack-up and component placement should be reviewed alongside the nominal delay range rather than treated as separate concerns. This product record combines the exact 1024-tap and 3.2 ns to 14.8 ns timing characteristics, package information, family alternatives, application guidance, comparison parameters, and practical PCB design notes. It is intended to accelerate part identification, qualification, replacement assessment, and first-pass schematic planning for precision timing designs.

詢價 聯絡我們
SY89295UTG - 1024-Tap Programmable Delay Line | Microchip
SY89295UTG

SY89295UTG - 1024-Tap Programmable Delay Line | Microchip

The Microchip SY89295UTG is a programmable LVPECL delay line providing 1024 taps, a 3.2 ns to 14.8 ns adjustable delay range, and 10 ps delay increments in a 32-pin TQFP package. The device operates from a 2.5 V ±5% or 3.3 V ±10% supply and is designed for precision timing and clock-alignment systems. A programmable delay line is a timing IC that delays a high-speed differential signal by a digitally selected interval. It belongs to the clock and timing IC hierarchy, where it provides deterministic signal-path timing rather than generating a clock. The SY89295UTG combines a 1-input, 32-tap-control architecture with fine delay resolution for circuit calibration, data capture, clock compensation, and communication-system timing. The principal features are 1024 programmable taps, 10 ps delay granularity, and a maximum delay of 14.8 ns. Its LVPECL interface supports operation from either 2.5 V ±5% or 3.3 V ±10%, while the 7 mm × 7 mm TQFP package supports compact surface-mount designs. These specifications make fine delay calibration practical where fixed-delay elements cannot accommodate board-level timing variation. Digital control permits the delay to be adjusted while the circuit is operating, supporting calibration and adaptive timing control. The input and output stages use LVPECL-compatible signaling, and the manufacturer describes the device as a precision programmable delay with fine-tune control. Designers must account for control-settling time, reference-clock quality, interconnect delay, and receiver setup and hold requirements when translating nominal delay into system timing accuracy. Typical applications include high-speed test equipment, serial-interface deskew, clock recovery networks, data-acquisition systems, and telecommunications equipment. The part is particularly useful when a system must compensate for propagation-delay differences across cables, connectors, printed-circuit-board traces, or multiple acquisition channels without changing the physical layout. Place input and output transmission lines with controlled impedance and minimize discontinuities on the high-speed LVPECL path. Use short, referenced ground-return connections and provide clean, decoupled supply rails because power and ground noise can disturb edge timing. The manufacturer’s pin-description and application information should be used when assigning the 32 package pins and terminating unused outputs. This page combines the confirmed device parameters, package information, sourcing path, and same-family replacement analysis with practical implementation guidance. It is intended to help engineers determine whether the SY89295UTG provides the required delay range, interface standard, control method, and board footprint for precision timing designs.

詢價 聯絡我們