SY88927VZG - 2.5Gbps Differential Receiver | Microchip Technology
MPN: SY88927VZG ✓ 啟用中SY88927VZG 概覽
A high-speed differential receiver is an interface IC that converts a small differential signal into a single-ended, logic-compatible output. Differential signaling reduces sensitivity to common-mode noise because the receiver evaluates the voltage difference between two conductors. The receiver category belongs to the broader hierarchy of differential receivers, line receivers, interface ICs, and semiconductors, serving as the input stage between high-frequency signal sources and downstream digital or analog circuitry.
The principal features include a 2.5 Gbps maximum data rate, support for both 3.3 V and 5 V supplies, differential input operation, and an 8-SOIC package. The SY88927V is described as functionally equivalent to the EL16V family while providing higher performance capability and faster output transition times. Those characteristics make it suitable for high-frequency sources requiring short transition times and deterministic signal propagation.
The receiver architecture converts the differential input into a single-ended output that can be referenced to an appropriate bias network. The output arrangement supports single-ended use or use as a DC bias for AC-coupled downstream circuits. Because high-speed PECL signaling uses common-mode voltage conventions, correct supply voltage, termination, biasing, and signal-plane geometry are essential to maintain output levels and minimize reflections.
Typical applications include 2.5 Gbps backplane links, telecommunications clock distribution, parallel-to-serial conversion systems, high-speed data acquisition, and clock recovery circuits. It can also serve in test equipment and optical-communication interfaces where a differential signal must be converted into a high-speed logic output before further processing.
Designers should place the receiver close to the signal source and use controlled-impedance routing with short differential traces. Power and ground connections must be decoupled locally, while unused inputs and outputs require the handling specified by the manufacturer datasheet. System timing and AC-coupling components should be evaluated together so that the complete receiver chain remains compatible with the 2.5 Gbps operating requirement.
直接替換替代品,適用於 SY88927VZG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品SY88927VZG 規格
| Product Type | High-speed differential receiver |
| Maximum Data Rate | 2.5 Gbps |
| Supply Voltage Range | 3.3 V to 5 V |
| Supported Supply Modes | 3.3 V or 5 V |
| Input Type | Differential input |
| 輸出類型 | Single-ended output |
| Logic Family | PECL-compatible |
| 封裝 | 8-pin SOIC |
| 安裝類型 | Surface mount |
| Receiver Configuration | 1 receiver |
| Reference Device | EL16V family |
SY88927VZG 8-pin soic 腳位配置指南
SY88927VZG(8-pin soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: SY88927VZG.
請參閱 資料表 以查看完整腳位配置。
典型應用
SY88927VZG 適用於 6 應用s: High-Speed Backplane Interfaces, Telecommunications Clock Recovery, Clock and Data Distribution, High-Speed Data Acquisition, Parallel-to-Serial Systems, Test and Measurement Equipment.
High-Speed Backplane Interfaces
The SY88927VZG is suitable for a 2.5 Gbps differential backplane receiver stage because it converts a small differential signal into a single-ended output while operating from 3.3 V or 5 V. Place it near the connector or transceiver output to limit trace loss, and use controlled-impedance routing for the differential pair. The receiver’s stated 2.5 Gbps capability gives the link useful performance margin when source and sink edges are rapid. The main engineering consideration is maintaining a continuous reference plane and providing the correct PECL-compatible bias network so that the output remains usable at the receiver’s rated signaling rate.
推薦
Telecommunications Clock Recovery
The SY88927VZG can form the receive stage of a telecommunications clock-recovery circuit operating up to 2.5 Gbps. Differential input reception is useful in high-speed backplanes and telecommunications equipment because common-mode disturbance affects the two signal conductors similarly, while the receiver responds to their voltage difference. The SY88927V family’s faster output transition capability relative to the EL16V family supports interfaces driven by high-frequency sources. Validate the recovered clock’s jitter and amplitude with the complete equalizer, termination, and AC-coupling network rather than treating the receiver alone as a complete timing system.
推薦
Clock and Data Distribution
The SY88927VZG can receive a high-speed differential clock and convert it to a single-ended logic output for downstream distribution. Its 2.5 Gbps rating allows it to handle communication and processing clocks whose edge rates are substantially faster than their repetition frequency. The 3.3 V or 5 V supply flexibility helps align the receiver with different logic environments, although output reference and level requirements must be checked carefully. Keep the input pair short, place local supply bypassing at the device, and confirm that the downstream load and transmission line do not distort the transition rate.
推薦
High-Speed Data Acquisition
The SY88927VZG can serve as the input receiver in acquisition equipment that accepts differential signals at rates up to 2.5 Gbps. Differential reception provides a useful balance of noise immunity and integration density in compact instrument designs, while the single-ended output can feed a converter or timing block. The critical performance considerations are input return loss, common-mode range, output transition time, and downstream loading. Use the manufacturer’s recommended circuit as the starting point, preserve symmetry between the differential traces, and evaluate the complete signal chain across temperature for timing-margin behavior.
推薦
Parallel-to-Serial Systems
The SY88927VZG fits the receiving side of a parallel-to-serial or serial-deserializer subsystem that uses a 2.5 Gbps differential link. The receiver’s differential input and single-ended output create a practical interface boundary between high-speed serial circuitry and downstream digital logic. Because a 2.5 Gbps edge rate has a short unit interval, component placement and trace geometry can materially affect performance. Position the receiver close to the serial source, provide uninterrupted reference planes, and verify that the selected output network preserves the intended logic levels. Use eye and timing measurements at the system level to establish the available margin.
推薦
Test and Measurement Equipment
The SY88927VZG can be used in test and measurement equipment that must receive a high-speed differential source while driving downstream circuitry through a single-ended output. Its stated 2.5 Gbps capability supports fast test-clock, pattern, or return-path interfaces, while operation from 3.3 V or 5 V supports multiple instrument architectures. Instrument designers should account for the PECL-compatible bias arrangement, connector and fixture losses, and the transition requirements of the measurement path. A short receiver footprint supports compact probe and module designs, but thermal and grounding performance must be verified in the finished instrument enclosure.
推薦
推薦產品摘要
工程參考資料,適用於 SY88927VZG — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Microchip Technology |
| Package | 8-SOIC |
| Product Type | High-speed differential receiver |
| Maximum Data Rate | 2.5 Gbps |
| Supply Voltage | 3.3 V to 5 V |
| Input Type | Differential input |
| Output Type | Single-ended output |
| Logic Family | PECL-compatible |
| Reference Device | Functionally equivalent to EL16V family |
| Mounting Type | Surface mount |
主要差異化特點
- High-speed differential input capability (對比EL16V family)
- Flexible supply selection (對比Lower-voltage-only receivers)
- Fast output transition performance (對比EL16V family)
設計說明
Route the differential input as a short, symmetric, controlled-impedance pair and place the SY88927VZG close to the source. At a 2.5 Gbps data rate, unequal trace length, an interrupted reference plane, or an abrupt impedance change can produce reflections that distort the receiver’s differential input. Use the manufacturer’s recommended termination and bias arrangement, and evaluate the input return loss across the operating frequency range.
Place supply-decoupling capacitors immediately adjacent to the device supply and ground connections, and provide a low-impedance ground path to the source. The receiver supports 3.3 V and 5 V operation, but the correct supply must also match the output bias and downstream logic environment. Review the manufacturer pin description carefully before routing because signal, bias, supply, and ground assignments must follow the exact package drawing.
Do not treat the statement that the SY88927V is functionally equivalent to the EL16V family as proof of drop-in compatibility. Verify package dimensions, every pin assignment, supply requirements, output bias, propagation timing, and transition performance. Also avoid selecting the receiver solely by clock frequency: the relevant interface criterion is the required data rate and the complete edge-rate behavior of the source, channel, and receiver.
Design the 3.3 V or 5 V supply path for the receiver’s actual operating current and the dynamic requirements of the output network. Use local high-frequency bypassing and avoid sharing narrow return paths between the receiver and noisy switching circuitry. Measure supply ripple at the device pins because supply disturbance can affect the single-ended output even when the differential input itself is clean.
合規資訊
Exact suffix-specific environmental and automotive compliance declarations require confirmation from Microchip Technology.