產品(44,000+)

EFM32TG108F8-QFN24T - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG108F8-QFN24T

EFM32TG108F8-QFN24T - 32MHz ARM Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG108F8-QFN24T is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller rated up to 32 MHz, with 8 KB Flash memory, 2 KB RAM, and 17 digital I/O pins. It is housed in a 24-QFN package measuring 5 mm by 5 mm and operates from a 1.85 V to 3.8 V supply. The MCU also includes two 16-bit timers for timing, event counting, and periodic control functions. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The ARM Cortex-M3 core places the EFM32TG108F8-QFN24T in the 32-bit embedded-controller hierarchy, while the Tiny Gecko platform adds energy-saving operating modes and rapid wake-up behavior. These characteristics make the device relevant to battery-operated products and other embedded systems where processing capability must be balanced against energy use. The principal resource limits are 8 KB of Flash and 2 KB of RAM. Flash stores executable code and nonvolatile configuration data, while RAM supports working variables, stack operations, and peripheral data. With 17 digital I/O pins, the device can connect external sensors, controls, indicators, and communication peripherals. Two dedicated 16-bit timers can provide periodic interrupts, elapsed-time measurement, pulse counting, or basic motor and timing functions. The 32 MHz Cortex-M3 processor provides substantially greater arithmetic capacity than an 8-bit controller while retaining a compact embedded architecture. Silicon Labs designed the Tiny Gecko family around low-power techniques, short wake-up times, and energy-saving modes. Those features make the MCU useful where the equipment spends substantial time idle but must respond quickly when a user action, sensor event, or scheduled task occurs. Typical uses include battery-powered sensor nodes, compact industrial controls, wearable accessories, smart-home endpoints, and low-power instrumentation. The 24-QFN footprint supports dense PCB layouts, but its exposed thermal and electrical requirements should be evaluated during layout. Firmware size must also remain within the 8 KB Flash constraint, which can be more restrictive than the nominal clock speed. A principal design consideration is matching the firmware footprint to the available memory. Two timers and 17 I/O pins provide useful connectivity, but the small RAM limit requires careful buffer sizing and stack budgeting. Decoupling, ground-return planning, and exposed-pad thermal management are equally important in compact single-board designs. This product record combines manufacturer specifications, family-level alternatives, package information, and practical design guidance to support faster MCU selection. It emphasizes the 32 MHz operating speed, 8 KB Flash, 2 KB RAM, 1.85 V to 3.8 V supply range, and 24-QFN footprint as the decisive engineering characteristics for embedded-system planning.

詢價 聯絡我們
EFM32TG110F16-D-QFN24 - 32MHz Cortex-M3 16KB MCU | Silicon Labs
EFM32TG110F16-D-QFN24

EFM32TG110F16-D-QFN24 - 32MHz Cortex-M3 16KB MCU | Silicon Labs

The Silicon Labs EFM32TG110F16-D-QFN24 is a 32-bit ARM Cortex-M3 microcontroller with a maximum clock frequency of 32 MHz, 16 kB of Flash memory, 4 kB of RAM, and 17 digital I/O pins, housed in a 24-QFN package measuring 5 mm by 5 mm. Its combination of a 32-bit processor, autonomous peripherals, and energy-saving operating modes targets compact, low-power embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, digital interfaces, timers, and analog peripherals onto one device. In the system hierarchy, the EFM32TG110F16-D-QFN24 belongs to the ARM Cortex-M microcontroller class, combining real-time processing with low-power operation. This makes it suitable for battery-powered sensors, compact industrial controllers, wearable accessories, and connected equipment that must balance processing capability with energy consumption. Key device features include 16 kB of Flash program memory, 4 kB of RAM, 17 digital I/O pins, two 16-bit timers, and a maximum operating frequency of 32 MHz. The EFM32TG family uses autonomous peripherals and energy-management modes to reduce activity in duty-cycled systems. According to the manufacturer datasheet, the family can consume as little as 0.6 µA in Stop mode and 150 µA/MHz in Run mode, supporting designs in which the processor remains idle during extended intervals. The EFM32TG110F16-D-QFN24 is built around the ARM Cortex-M3 processor and supports two-wire Serial Wire Debug. A separate one-wire Serial Wire Viewer interface can provide profiling information, data trace, and software-generated messages. These debugging resources make it possible to inspect low-power behavior without requiring a full high-pin-count debug interface, while the 32 MHz clock rate supports responsive control and communication tasks. Typical applications include low-power sensor nodes, building controls, compact industrial automation modules, battery-operated accessories, and embedded IoT products. The device is particularly suitable when a design needs more processing capability than an 8-bit controller but does not require the memory or I/O capacity of a larger application processor. PCB design should preserve the exposed-pad thermal and electrical requirements of the 24-QFN package, place decoupling capacitors close to the supply pins, and provide clean routing for the Serial Wire Debug interface. Confirm the exact pin assignments and exposed-pad connection in the manufacturer pinout table before laying out a new board. This product record combines the manufacturer specifications, package information, memory resources, low-power characteristics, and engineering guidance needed to evaluate the EFM32TG110F16-D-QFN24 for compact, low-power embedded designs.

詢價 聯絡我們
EFM32TG110F16-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG110F16-QFN24

EFM32TG110F16-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG110F16-QFN24 is an ARM Cortex-M3 32-bit microcontroller rated up to 32 MHz, with 16 kB of Flash memory and 4 kB of RAM in a 24-QFN 5 x 5 mm surface-mount package. The device includes 17 digital I/O pins, two 16-bit timers, AES and operational-amplifier functions, and operates from a 1.85 V to 3.8 V supply range. A microcontroller is a programmable system-on-chip combining a processor core, nonvolatile program memory, volatile working memory, and peripherals such as timers, communication interfaces, analog blocks, and general-purpose I/O. The EFM32 Tiny Gecko family belongs to the 32-bit embedded MCU hierarchy and is designed for battery-operated and energy-sensitive equipment. Its Cortex-M3 architecture supports efficient control processing while the low-energy platform emphasizes short wake-up times and energy-saving modes. The principal features of the EFM32TG110F16-QFN24 include its 32 MHz operating speed, 16 kB Flash program storage, 4 kB RAM, 17 digital I/O pins, and two 16-bit timers. The manufacturer also identifies AES hardware and an operational amplifier among the device capabilities. Its 24-QFN package includes an exposed pad and measures 5 x 5 mm, supporting compact designs where board area and supply current are important constraints. Technically, the part combines an ARM Cortex-M3 instruction set with Silicon Labs low-energy techniques. The 1.85 V to 3.8 V operating range accommodates low-voltage embedded systems, including systems powered from a regulated 3.3 V rail or suitable battery-derived supply. Flash memory provides durable firmware storage, while the 4 kB RAM supports working state, stack operations, buffers, and peripheral data handling. The 17 digital I/O pins allow external sensors, indicators, controls, and communication devices to be connected without relying entirely on dedicated peripherals. Typical applications include low-power sensor nodes, wearable electronics, compact industrial controls, battery-powered instruments, connected IoT equipment, and small control modules. The device is particularly appropriate where frequent wake-up, low idle consumption, fast control response, and local processing are more important than large memory capacity. Designers should follow the manufacturer datasheet for the complete QFN-24 pin map, exposed-pad connection, decoupling requirements, and GPIO limitations. Because the exposed pad is part of the thermal and electrical design, the PCB should provide suitable copper and a recommended land pattern. Firmware configuration, clock setup, and peripheral initialization must also follow the EFM32 Tiny Gecko reference material. This product overview combines the manufacturer device specifications with practical selection criteria, application guidance, package considerations, and clearly identified alternatives. It helps engineers determine whether the EFM32TG110F16-QFN24 provides sufficient processing speed, memory, I/O, and low-voltage operation for a compact embedded design before beginning layout and firmware development.

詢價 聯絡我們
EFM32TG110F32-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG110F32-D-QFN24

EFM32TG110F32-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG110F32-D-QFN24 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 KB of flash memory and 4 KB of RAM, housed in a 24-pin QFN 5 mm × 5 mm package. It belongs to the Tiny Gecko family and combines a low-power MCU platform with fast wake-up behavior, AES hardware, an operational amplifier, timers, and energy-saving modes for embedded control designs. A microcontroller is a programmable system-on-chip that integrates a CPU, memory, and peripherals such as GPIO, timers, communications interfaces, and analog blocks. The EFM32TG110 is specifically designed around the ARM Cortex-M3 processor. In the product hierarchy, Cortex-M3 is a 32-bit ARM processor core, while the EFM32TG110 is a low-power microcontroller, and the Tiny Gecko family is a Silicon Labs MCU product family intended for battery-operated and energy-sensitive equipment. The EFM32TG110F32-D-QFN24 provides 32 KB of flash, 4 KB of RAM, 17 digital I/O pins, and two 16-bit timers according to the manufacturer product page. Its maximum CPU frequency is 32 MHz. The device also includes AES hardware and an operational amplifier, allowing security-oriented and analog signal-conditioning functions to be integrated without requiring separate components. Its 24-QFN package supports compact PCB layouts while providing substantial peripheral capability for its size. The Tiny Gecko architecture emphasizes energy efficiency through low-power operating modes and short wake-up times. This architecture is useful when the controller must remain responsive while consuming little power between user events. Compared with a continuously active general-purpose processor, the EFM32TG110 can spend more time in an energy-saving state and resume processing rapidly when required. Firmware can therefore balance responsiveness against average current consumption in battery-powered systems. Typical applications include low-power sensor nodes, wearable accessories, compact industrial controllers, connected accessories, and embedded instruments. The 32 KB flash capacity is suitable for moderate firmware workloads, while the 4 KB RAM supports control buffers and application state. The integrated AES block can accelerate compatible cryptographic operations, and the operational amplifier can reduce the component count in analog front ends when its operating limits suit the design. Hardware implementation requires careful attention to the EFM32 power-domain connections. The manufacturer documentation states that AVDD_x, VDD_DREG, and IOVDD_x must be connected together at the PCB level, with an optional filter. Place these connections and their decoupling capacitors as directed by the manufacturer application note AN0002, EFM32 Hardware Design Considerations, and provide clean, properly sequenced supply paths for reliable operation. This product overview combines the manufacturer specifications with practical guidance for low-power firmware, analog integration, secure data handling, and PCB implementation. It also supports direct comparison with pin-compatible Tiny Gecko options, helping engineers select a flash-memory capacity that matches the firmware and application requirements without changing the board footprint.

詢價 聯絡我們
EFM32TG110F32-QFN24T - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG110F32-QFN24T

EFM32TG110F32-QFN24T - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG110F32-QFN24T is a 32-bit ARM Cortex-M3 microcontroller rated up to 32 MHz, with 32 kB of Flash memory, 4 kB of RAM, and 17 digital I/O pins. The device is offered in a 24-QFN surface-mount package with an exposed pad and is supplied in tape-and-reel format under the T suffix. A microcontroller is a programmable semiconductor that integrates a processor core, memory, digital I/O, timers, analog interfaces, and communication peripherals on one integrated circuit. The EFM32TG110 belongs to Silicon Labs' Tiny Gecko family, a low-power 32-bit MCU product hierarchy designed for battery-operated systems, portable instruments, connected sensors, and industrial devices. Its ARM Cortex-M3 core provides a 32-bit instruction set and a familiar embedded software platform. The headline specifications are a maximum clock speed of 32 MHz, 32 kB of Flash, and 4 kB of RAM. Silicon Labs specifies 17 digital I/O pins, two 16-bit timers, and an operating supply range of 1.85 V to 3.8 V. The family also emphasizes low-power operation, with the EFM32TG data sheet reporting consumption as low as 0.6 uA in Stop mode and 150 uA/MHz in Run mode. The integrated feature set makes the EFM32TG110 suitable for designs that need more processing capability than an 8-bit controller without moving to a larger, higher-power MCU. Peripherals can perform measurements, timing, and control tasks while the processor sleeps, helping reduce overall energy use in duty-cycled systems. The 32 kB Flash capacity is appropriate for compact firmware, while 4 kB of RAM supports protocol buffers, sampled data, and application state. Typical uses include low-power sensor nodes, compact industrial monitoring equipment, battery-powered accessories, wearable electronics, and connected IoT products. In each case, the combination of a 32 MHz Cortex-M3 core, low-power modes, and a small 24-QFN footprint supports responsive control without requiring a large system-on-chip. The exposed thermal pad also provides a direct heat-spreading path on multilayer PCBs. Hardware design must follow Silicon Labs' power and grounding recommendations. The EFM32TG requires AVDD_x, VDD_DREG, and IOVDD_x to be connected together, optionally through a filter, as described in the EFM32TG data sheet and AN0002 EFM32 Hardware Design Considerations. Careful placement of decoupling capacitors, a continuous ground plane, and adequate exposed-pad thermal vias is essential for stable operation and predictable electromagnetic performance. This page combines manufacturer specifications, package information, drop-in family alternatives, application guidance, and PCB-oriented engineering notes. It also distinguishes the F32 memory configuration from lower-memory Tiny Gecko variants and identifies where firmware capacity, RAM requirements, temperature grade, or packaging must be checked before approving a replacement.

詢價 聯絡我們
EFM32TG110F4-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG110F4-D-QFN24

EFM32TG110F4-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG110F4-D-QFN24 is a 32-bit ARM Cortex-M3 microcontroller rated up to 32 MHz, with 4 kB of Flash memory, 2 kB of RAM, and 17 digital I/O pins in a 24-QFN package measuring 5 x 5 mm. It operates from a 1.98 V to 3.8 V supply and is designed for compact, energy-sensitive embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one package. The EFM32TG110 belongs to the Tiny Gecko family, a low-power 32-bit MCU platform suited to battery-powered and portable equipment. This device combines the ARM Cortex-M3 instruction set with energy-saving modes, fast wake-up behavior, and autonomous peripheral capabilities. The primary verified features of the EFM32TG110F4-D-QFN24 include a maximum CPU speed of 32 MHz, 4 kB of Flash, 2 kB of RAM, and 17 digital I/O pins. Its hardware also provides two 16-bit timers, an AES-capable feature set identified in distributor listings, an operational amplifier, a temperature sensor, a voltage comparator, and a flexible clock system that includes a 32.768 kHz crystal oscillator option. The device is positioned as a low-power platform with run consumption specified by the manufacturer datasheet as 150 uA/MHz and Stop-mode consumption as low as 0.6 uA. Its architecture allows peripherals to perform routine measurements, comparisons, timing, and communications without continuous CPU intervention. This can reduce processing demand in systems that periodically wake, acquire information, transmit data, and return to a low-energy state. Typical uses include sensor nodes, compact industrial controls, wearable accessories, connected measurement equipment, and low-power embedded products. The 5 x 5 mm 24-QFN package supports space-constrained designs, while the 17 digital I/O pins provide connections for sensors, indicators, communications, and control signals. The limited 4 kB Flash and 2 kB RAM make firmware and application data sizing particularly important. When designing around this MCU, connect AVDD_x, VDD_DREG, and IOVDD_x as directed by the manufacturer hardware-design guidance and preserve the recommended decoupling layout. Confirm startup behavior, clock selection, exposed-pad soldering, and peripheral pin assignments against the EFM32TG110 datasheet before releasing a PCB for production. This product record combines verified manufacturer specifications, distributor pricing, same-family drop-in alternatives, and practical design guidance. It emphasizes the constraints that matter when selecting a 4 kB-Flash, 2 kB-RAM Cortex-M3 MCU for compact and energy-conscious equipment.

詢價 聯絡我們
EFM32TG110F4-D-QFN24R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)
EFM32TG110F4-D-QFN24R

EFM32TG110F4-D-QFN24R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)

The Silicon Labs EFM32TG110F4-D-QFN24R is a 32-bit ARM Cortex-M3 microcontroller rated up to 32 MHz, with 4 kB of Flash memory, 2 kB of RAM, and 17 digital I/O pins in a 24-QFN package measuring 5 x 5 mm. It operates from a 1.98 V to 3.8 V supply and is designed for compact, energy-sensitive embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one package. The EFM32TG110 belongs to the Tiny Gecko family, a low-power 32-bit MCU platform suited to battery-powered and portable equipment. This device combines the ARM Cortex-M3 instruction set with energy-saving modes, fast wake-up behavior, and autonomous peripheral capabilities. The primary verified features of the EFM32TG110F4-D-QFN24R include a maximum CPU speed of 32 MHz, 4 kB of Flash, 2 kB of RAM, and 17 digital I/O pins. Its hardware also provides two 16-bit timers, an AES-capable feature set identified in distributor listings, an operational amplifier, a temperature sensor, a voltage comparator, and a flexible clock system that includes a 32.768 kHz crystal oscillator option. The device is positioned as a low-power platform with run consumption specified by the manufacturer datasheet as 150 uA/MHz and Stop-mode consumption as low as 0.6 uA. Its architecture allows peripherals to perform routine measurements, comparisons, timing, and communications without continuous CPU intervention. This can reduce processing demand in systems that periodically wake, acquire information, transmit data, and return to a low-energy state. Typical uses include sensor nodes, compact industrial controls, wearable accessories, connected measurement equipment, and low-power embedded products. The 5 x 5 mm 24-QFN package supports space-constrained designs, while the 17 digital I/O pins provide connections for sensors, indicators, communications, and control signals. The limited 4 kB Flash and 2 kB RAM make firmware and application data sizing particularly important. When designing around this MCU, connect AVDD_x, VDD_DREG, and IOVDD_x as directed by the manufacturer hardware-design guidance and preserve the recommended decoupling layout. Confirm startup behavior, clock selection, exposed-pad soldering, and peripheral pin assignments against the EFM32TG110 datasheet before releasing a PCB for production. This product record combines verified manufacturer specifications, distributor pricing, same-family drop-in alternatives, and practical design guidance. It emphasizes the constraints that matter when selecting a 4 kB-Flash, 2 kB-RAM Cortex-M3 MCU for compact and energy-conscious equipment.

詢價 聯絡我們
EFM32TG110F4-QFN24 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG110F4-QFN24

EFM32TG110F4-QFN24 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG110F4-QFN24 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 4 kB Flash, 2 kB RAM, 17 digital I/O pins, and two 16-bit timers in a 24-QFN package. The device is designed around EFM32 Tiny Gecko energy-saving techniques, including fast wake-up behavior and low-power modes, making it suitable for battery-operated and energy-sensitive embedded systems. An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-computing processor core designed for embedded control. The Cortex-M3 combines deterministic interrupt handling, compact code footprint, and integrated support for energy-efficient system design. In the Silicon Labs hierarchy, the MCU integrates the processor core, Flash memory, RAM, clock circuitry, timers, communication peripherals, and low-power management into one package. The EFM32TG110F4-QFN24 provides 4 kB of Flash for program storage and 2 kB of RAM for working data. Its 17 digital I/O pins support digital sensing and control functions, while two 16-bit timers support timing, pulse measurement, and periodic event generation. The 32 MHz processor speed provides headroom for control loops and lightweight signal-processing tasks in compact systems. The Tiny Gecko platform emphasizes low-energy operation, fast wake-up from energy-saving states, and energy-saving modes. These characteristics are relevant when the average current budget is determined by long sleep intervals rather than continuous processing. The MCU can therefore be used in portable instrumentation, sensor nodes, small industrial controls, and connected low-power products where minimizing energy consumption is more important than maximum flash capacity. Typical applications include battery-powered sensor nodes, compact industrial monitors, low-power wireless peripherals, consumer accessories, and embedded control modules. Designers should select external crystals or timing components according to the required clock accuracy, connect decoupling capacitors close to the supply pins, and confirm the exposed-pad thermal and layout requirements in the manufacturer datasheet. This page combines the verified manufacturer specifications, distributor references, package information, and design guidance for engineers evaluating the EFM32TG110F4-QFN24. It emphasizes the distinction between verified device characteristics and parameters that must be confirmed from the complete datasheet before PCB release or production qualification.

詢價 聯絡我們
EFM32TG110F4-QFN24T - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG110F4-QFN24T

EFM32TG110F4-QFN24T - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG110F4-QFN24T is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 4 KB of Flash memory, 2 KB of RAM, 17 digital I/O pins, and a 24-QFN 5 x 5 mm package. Its low-power platform supports energy-sensitive embedded systems with fast wake-up and energy-saving operating modes. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one compact device. The EFM32TG110 belongs to the Tiny Gecko family of 32-bit ARM Cortex-M3 microcontrollers, a branch of embedded processors designed for low-power control, sensing, communications, and user-interface functions. Its 24-pin QFN package also supports compact, high-density PCB layouts. Key device features include a 32 MHz Cortex-M3 core, 4 KB of Flash program memory, 2 KB of SRAM, 17 digital I/O pins, two 16-bit timers, three operational amplifiers, and AES hardware support. The operating supply range of 1.85 V to 3.8 V suits both 2.5 V and 3.3 V system rails. These resources are intended for modest control tasks where energy efficiency, rapid startup, and peripheral integration matter more than large memory capacity. The Cortex-M3 processor uses the ARM Thumb instruction set and provides a conventional embedded software ecosystem. Hardware peripherals reduce processor workload for timing, analog measurements, communications, and data-security functions. The integrated operational amplifiers can support analog signal conditioning, while AES support provides a hardware path for encrypted data handling. Firmware development requires suitable ARM debugging tools, a driver library, and a board configured for the device power, clock, reset, and programming interface. Typical uses include battery-powered sensors, compact industrial monitoring nodes, building and access controls, portable measurement instruments, low-energy IoT endpoints, and small motor or actuator controllers. The 4 KB Flash and 2 KB RAM favor focused applications with modest code and working-data requirements, while the 17 I/O pins allow several sensors, indicators, and external interfaces to share one controller. Designers should verify every exposed-pin function, programming connection, and decoupling requirement against the manufacturer pin description and reference schematic. Place the exposed pad and ground-plane connection according to the package drawing, provide local supply bypassing, and confirm that the firmware linker configuration matches the 4 KB Flash and 2 KB RAM partition. This product page consolidates the core device specifications, practical design considerations, package information, and documented cross-reference candidates into an engineering-focused selection resource. It also distinguishes the exact ordered device from related family members whose memory, core, package suffix, or ordering configuration differs.

詢價 聯絡我們
EFM32TG110F8-D-QFN24 - 32MHz Cortex-M3 Tiny Gecko MCU | Silicon Labs
EFM32TG110F8-D-QFN24

EFM32TG110F8-D-QFN24 - 32MHz Cortex-M3 Tiny Gecko MCU | Silicon Labs

The Silicon Labs EFM32TG110F8-D-QFN24 is an ARM Cortex-M3 32-bit microcontroller running up to 32 MHz with 8 KB of Flash and 2 kB of RAM, housed in a 24-QFN (5 x 5 mm) surface-mount package. It is built on Silicon Labs' energy-friendly EFM32 platform, combining a low-power architecture with fast wake-up from energy-saving modes for battery-operated and energy-harvesting designs. A microcontroller (MCU) is a single integrated circuit that contains a processor core, program memory, data memory and a set of dedicated peripherals such as timers, GPIO, serial interfaces and analog blocks. Within the component hierarchy, the EFM32TG110 sits in the ARM Cortex-M3 class of 32-bit embedded processors and in the EFM32 Tiny Gecko family of Silicon Labs low-power MCUs, a line positioned between the larger EFM32 Gecko and the ultra-low-power EFM32 Zero Gecko families for designs where energy cost per data point matters. Key features of this device include an ARM Cortex-M3 core operating up to 32 MHz, 8 KB of Flash program memory organized as 8K x 8, 2 kB of SRAM, 17 digital I/O pins and two 16-bit timers. Silicon Labs specifies run-mode current of 150 uA/MHz and stop-mode current as low as 0.6 uA, which is the core reason the family is popular in coin-cell and sensor-node products. The device also integrates an AES hardware accelerator, analog peripherals including an operational amplifier, and a 2-pin serial-wire debug interface with a separate 1-wire Serial Wire Viewer pin for profiling and trace output. Technically, the Tiny Gecko platform gives the EFM32TG110 fast wake-up times from its deep-sleep states, retention of output state in shutoff mode, and a peripheral set that can operate autonomously. This lets a design sleep at microamp current, wake, sample a sensor, transmit a short packet and return to sleep without the long wake latency typical of generic low-power MCUs, which directly reduces average current in duty-cycled nodes. Typical applications include wireless sensor nodes and IoT end devices, industrial monitoring and metering, battery-powered handheld instruments, energy-harvesting sensors, smart home accessories and small motor or actuator control sub-systems where a full MCU plus glue logic would be over-specified. When designing with the EFM32TG110F8-D-QFN24, remember that its 2 kB of RAM is the real design constraint: keep stack depth, DMA buffers and protocol buffers lean, and prefer the 8 KB Flash part only for code sizes that genuinely fit. Route the two SWD debug pins to test points so the board can be programmed and profiled in production. This page consolidates device specifications, drop-in alternatives in the same 24-QFN footprint, a parameter-by-parameter comparison, and practical low-power design notes so engineers can qualify the part against a second source and plan a board layout in one pass.

詢價 聯絡我們
EFM32TG110F8-D-QFN24R - 32MHz Cortex-M3 Tiny Gecko MCU | Silicon Labs (Tape & Reel)
EFM32TG110F8-D-QFN24R

EFM32TG110F8-D-QFN24R - 32MHz Cortex-M3 Tiny Gecko MCU | Silicon Labs (Tape & Reel)

The Silicon Labs EFM32TG110F8-D-QFN24R is an ARM Cortex-M3 32-bit microcontroller running up to 32 MHz with 8 KB of Flash and 2 kB of RAM, housed in a 24-QFN (5 x 5 mm) surface-mount package. It is built on Silicon Labs' energy-friendly EFM32 platform, combining a low-power architecture with fast wake-up from energy-saving modes for battery-operated and energy-harvesting designs. A microcontroller (MCU) is a single integrated circuit that contains a processor core, program memory, data memory and a set of dedicated peripherals such as timers, GPIO, serial interfaces and analog blocks. Within the component hierarchy, the EFM32TG110 sits in the ARM Cortex-M3 class of 32-bit embedded processors and in the EFM32 Tiny Gecko family of Silicon Labs low-power MCUs, a line positioned between the larger EFM32 Gecko and the ultra-low-power EFM32 Zero Gecko families for designs where energy cost per data point matters. Key features of this device include an ARM Cortex-M3 core operating up to 32 MHz, 8 KB of Flash program memory organized as 8K x 8, 2 kB of SRAM, 17 digital I/O pins and two 16-bit timers. Silicon Labs specifies run-mode current of 150 uA/MHz and stop-mode current as low as 0.6 uA, which is the core reason the family is popular in coin-cell and sensor-node products. The device also integrates an AES hardware accelerator, analog peripherals including an operational amplifier, and a 2-pin serial-wire debug interface with a separate 1-wire Serial Wire Viewer pin for profiling and trace output. Technically, the Tiny Gecko platform gives the EFM32TG110 fast wake-up times from its deep-sleep states, retention of output state in shutoff mode, and a peripheral set that can operate autonomously. This lets a design sleep at microamp current, wake, sample a sensor, transmit a short packet and return to sleep without the long wake latency typical of generic low-power MCUs, which directly reduces average current in duty-cycled nodes. Typical applications include wireless sensor nodes and IoT end devices, industrial monitoring and metering, battery-powered handheld instruments, energy-harvesting sensors, smart home accessories and small motor or actuator control sub-systems where a full MCU plus glue logic would be over-specified. When designing with the EFM32TG110F8-D-QFN24R, remember that its 2 kB of RAM is the real design constraint: keep stack depth, DMA buffers and protocol buffers lean, and prefer the 8 KB Flash part only for code sizes that genuinely fit. Route the two SWD debug pins to test points so the board can be programmed and profiled in production. This page consolidates device specifications, drop-in alternatives in the same 24-QFN footprint, a parameter-by-parameter comparison, and practical low-power design notes so engineers can qualify the part against a second source and plan a board layout in one pass.

詢價 聯絡我們
EFM32TG110F8-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG110F8-QFN24

EFM32TG110F8-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG110F8-QFN24 is an ARM Cortex-M3 microcontroller operating up to 32 MHz, with 8 kB of Flash memory, 2 kB of RAM, 17 digital I/O pins, and a 24-QFN 5 x 5 mm package. It combines a 32-bit RISC core with low-power energy-management techniques, fast wake-up behavior, and energy-saving modes for embedded designs. A microcontroller is a programmable system-on-chip that integrates a CPU, nonvolatile program memory, volatile data memory, peripherals, and I/O into one package. The EFM32 Tiny Gecko family belongs to the hierarchy of embedded processors, microcontrollers, integrated circuits, and semiconductors. It is designed to execute firmware while controlling sensors, communications, user interfaces, and power functions in compact, energy-sensitive systems. The EFM32TG110F8-QFN24 reaches 32 MHz and includes two 16-bit timers, AES and operational-amplifier resources identified by the distributor listings, and 17 digital I/O pins. Its 8 kB Flash supports a modest embedded program image, while 2 kB of RAM provides working memory for control logic and data buffering. The 1.85 V to 3.8 V supply range supports low-voltage embedded systems. The ARM Cortex-M3 processor provides a 32-bit RISC architecture and can achieve as much as 1.25 Dhrystone MIPS/MHz, according to the EFM32TG110 datasheet hosted by Keil. The Cortex-M3 also includes a Memory Protection Unit supporting up to eight memory segments and a Wake-up Interrupt Controller for interrupts generated while the processor sleeps. Typical uses include compact industrial sensors, energy-conscious IoT nodes, wearable accessories, low-power instrumentation, and connected peripherals. Developers can use the 17 available digital I/O pins for sensors, actuators, status indicators, and serial interfaces, while the timers support periodic measurement, timing, or pulse-related tasks. The principal design consideration is the small memory footprint. Firmware must fit within 8 kB of Flash and its working data within 2 kB of RAM, so code size, library use, stack depth, and interrupt handling should be checked early. Hardware design should follow Silicon Labs guidance in AN0002 EFM32 Hardware Design Considerations. This page consolidates verified manufacturer and distributor details, package information, application guidance, and selection considerations. It helps engineers compare the EFM32TG110F8-QFN24 against available alternatives without treating merely similar microcontrollers as verified drop-in replacements.

詢價 聯絡我們
EFM32TG110F8-QFN24T - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG110F8-QFN24T

EFM32TG110F8-QFN24T - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG110F8-QFN24T is a 32 MHz ARM Cortex-M3 microcontroller with 8 kB Flash, 2 kB RAM, and 17 digital I/O pins in a 24-QFN 5 x 5 mm package. The device operates from a 1.85 V to 3.8 V supply and includes two 16-bit timers, AES hardware, and three operational amplifiers. A microcontroller is an integrated circuit that combines a processor core, program memory, data memory, and peripherals on one semiconductor die. The EFM32TG110 belongs to the Tiny Gecko family of 32-bit embedded MCUs, placing an ARM Cortex-M3 core within the broader hierarchy of microcontroller, embedded processor, and semiconductor devices. Silicon Labs positions this low-power platform for energy-sensitive embedded products that require fast wake-up operation and energy-saving modes. The principal feature set includes operation up to 32 MHz, 8 kB of Flash, 2 kB of RAM, and 17 digital I/O pins. Two 16-bit timers support periodic timing, input capture, output compare, and basic motor or control functions. Integrated AES hardware accelerates cryptographic operations, while the three operational amplifiers reduce the need for external analog signal-conditioning components in suitable low-power measurement circuits. The 1.85 V to 3.8 V operating range permits use from 2 V-class and 3.3 V systems when the individual rail, peripheral, and timing requirements remain within device limits. The 24-QFN 5 x 5 mm package provides a compact surface-mount option for space-constrained products. Because the QFN has no exposed leads, PCB layout must provide adequate solderable land area and careful thermal-via placement beneath the package where appropriate. Typical applications include low-power sensor nodes, compact industrial control modules, battery-operated accessories, small motor-control systems, and embedded instrumentation. The ARM Cortex-M3 architecture provides a familiar software ecosystem, while the 8 kB Flash footprint makes the MCU most appropriate for compact control logic rather than resource-intensive applications. The 2 kB RAM also favors targeted buffering and state management over large data acquisition workloads. Designers should allocate decoupling capacitors close to the supply pins, confirm that every exposed-pad thermal and solder-layout requirement follows the package drawing, and keep analog signals away from fast-switching nodes. The three operational amplifiers and 17 I/O pins should be assigned only after checking the pin-mux limitations, analog operating ranges, and shared peripheral resources in the manufacturer pin description table. This product page consolidates the core MCU specifications, package constraints, application guidance, and validated cross-reference options into one engineering-focused reference. It also highlights memory differences and family considerations that determine whether a candidate can replace the EFM32TG110F8-QFN24T without PCB or firmware redesign.

詢價 聯絡我們
EFM32TG11B120F128GM32-BR - 48MHz Cortex-M0+ 128KB Flash MCU | Silicon Labs
EFM32TG11B120F128GM32-BR

EFM32TG11B120F128GM32-BR - 48MHz Cortex-M0+ 128KB Flash MCU | Silicon Labs

The Silicon Labs EFM32TG11B120F128GM32-BR is an ARM Cortex-M0+ Tiny Gecko 1 microcontroller running at 48 MHz with 128 KB of flash and 32 KB of RAM, housed in a 32-pin QFN (5x5 mm) package. It is offered on tape and reel for high-volume SMT assembly. The part targets ultra-low-power embedded designs with Silicon Labs' proprietary energy-friendly peripherals, fast wake-up time, and deep-sleep current in the sub-microamp range. A microcontroller (MCU) is a single-chip computer containing a CPU core, volatile and non-volatile memory, and a rich set of on-chip peripherals such as timers, ADC, communication controllers, and GPIO. The Cortex-M0+ is the most energy-efficient ARM core from Arm Holdings, optimized for deterministic real-time response and minimal gate count. The Tiny Gecko 1 family further layers Silicon Labs' LESENSE, low-energy timer, and EMU (Energy Management Unit) features on top of the Cortex-M0+ to deliver energy-sensitive IoT endpoints that wake, sense, transmit, and return to deep sleep within milliseconds. Key features of this variant include 128 KB flash, 32 KB RAM, a 32-pin QFN package, supply voltage of 1.8 V to 3.8 V, and 24 digital I/O pins. The integrated DC-DC regulator and the broad peripheral mix (ADC, DAC, I2C, SPI, UART, USB, low-energy UART, and timers) make it well suited to battery-powered wireless sensor nodes, wearable health patches, and industrial HVAC controls. Technically, the part is built around a 32-bit ARM Cortex-M0+ core with hardware single-cycle multiplier, supported by a peripheral reflex system that lets DMA, GPIO, and timers collaborate without CPU intervention. The energy-friendly design includes five energy modes (EM0-EM4) with sub-microamp deep-sleep current, hardware crypto (AES-128/256), and a true random number generator (TRNG). Typical applications include IoT sensor endpoints, BLE-enabled beacons, wearable fitness bands, smart-home sensor hubs, industrial HVAC thermostats, battery-powered metering, and remote controls. The wide 1.8-3.8 V supply range simplifies single-cell Li-ion or 2x AA battery designs. When designing with this part, pay attention to the DC-DC inductor selection (the on-chip DC-DC needs an external 10 uH inductor) and the QSPI loading for any external flash expansion. The 32-pin QFN footprint is compact but leaves only 24 GPIO; engineers needing more I/O should step up to the QFP-64 or QFN-64 variants in the same family. This page synthesizes distributor pricing, drop-in alternatives within the same QFN-32 footprint, and practical low-energy design guidance not found in the manufacturer datasheet alone.

詢價 聯絡我們
EFM32TG11B520F128GQ64-B - 48MHz Cortex-M0+ 128KB MCU | Silicon Labs
EFM32TG11B520F128GQ64-B

EFM32TG11B520F128GQ64-B - 48MHz Cortex-M0+ 128KB MCU | Silicon Labs

The Silicon Labs EFM32TG11B520F128GQ64-B is an ARM Cortex-M0+ Tiny Gecko 1 microcontroller delivering 48 MHz of CPU performance with 128 KB of Flash and 32 KB of RAM in a 64-pin TQFP (10x10 mm) package, qualified for industrial temperature ranges. It is engineered for energy-sensitive connected applications that demand deterministic low-power operation and rich analog integration. What is an ARM Cortex-M0+ microcontroller? It is the most energy-efficient core in the ARM Cortex-M family, providing a 32-bit instruction set and Thumb-2 instruction subset while consuming only a few tens of microamps per MHz in active mode. The Cortex-M0+ core sits inside the EFM32 Tiny Gecko platform, which adds aggressive energy modes, peripheral reflex system, and a low-energy sensor interface (LESENSE) for autonomous sensor monitoring while the CPU sleeps. Key features include a hardware cryptographic engine supporting AES, ECC, SHA, and a True Random Number Generator (TRNG), 50 digital I/O pins with 5 V tolerance, a CAN 2.0 controller, robust capacitive sensing, and integrated 12-bit ADC and DAC peripherals. Active-mode current is rated at approximately 40 uA/MHz in Energy Mode 0 (EM0), with multiple low-energy sleep modes allowing deep sleep currents below 1 uA. Architecturally, the EFM32TG11B520F128GQ64-B uses a Cortex-M0+ core with a single-cycle multiplier and a Nested Vector Interrupt Controller (NVIC). Silicon Labs' proprietary Peripheral Reflex System (PRS) allows peripherals to communicate directly without CPU involvement, dramatically reducing wake-ups. The hardware crypto block offloads AES-128/256, SHA-1/2, ECC operations from the CPU for secure IoT. Typical applications include smart energy metering, IoT sensor nodes, secure connected wearables, capacitive-touch human-machine interfaces, industrial sensor hubs, and battery-powered home automation devices. The cryptographic engine and TRNG make it suitable for authenticated sensor endpoints requiring secure firmware update and tamper resistance. When designing with this MCU, allocate sufficient decoupling (one 100 nF X7R cap per VDD pin) and keep the analog reference traces short to preserve ADC linearity. Use Simplicity Studio with the GeckoPlatform_EFM32TG11B_DFP CMSIS pack for IDE configuration, and enable the JLC flash lock bits before deploying cryptographic keys to production silicon. This page synthesizes distributor pricing across DigiKey, Mouser, and LCSC, drop-in alternatives within the EFM32 Tiny Gecko family, and practical design notes not aggregated elsewhere, helping engineers compare options and source the part quickly.

詢價 聯絡我們
EFM32TG210F16-D-QFN32 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG210F16-D-QFN32

EFM32TG210F16-D-QFN32 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG210F16-D-QFN32 is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating at up to 32 MHz, with 16 KB of Flash memory, 4 KB of RAM, and a 32-QFN 6 x 6 mm package. It combines a 32-bit RISC core with autonomous peripherals and low-power operating modes for energy-sensitive embedded systems. A microcontroller is a complete programmable control device integrating a processor core, Flash program memory, RAM, clocking, interrupt control, and peripherals such as timers, communications interfaces, and analog blocks. Within the product hierarchy, the EFM32TG210 belongs to the Tiny Gecko family of 32-bit microcontrollers and uses the ARM Cortex-M3 processor architecture. Key specifications include a maximum clock frequency of 32 MHz, 16 KB of program Flash, 4 KB of SRAM, and 24 digital I/O pins. The processor can reach 1.25 Dhrystone MIPS per MHz, while an integrated Memory Protection Unit supports as many as eight memory segments. A Wake-up Interrupt Controller handles interrupts generated while the CPU is asleep. The EFM32TG210 combines relatively high processing performance with low-power behavior suitable for battery-operated equipment. Published power characteristics include consumption as low as 0.6 uA in Stop mode and approximately 150 uA/MHz in Run mode. Autonomous peripheral operation allows timers and other functions to continue handling defined events while the processor remains in a low-energy state, reducing the need for continuous software polling. Typical applications include connected sensor nodes, compact industrial controllers, battery-powered meters, low-power communications equipment, wearable accessories, and embedded subsystems that need a 32-bit core in a small surface-mount footprint. The 1.85 V to 3.8 V operating supply range also suits designs built around low-voltage 3 V power rails. When laying out the board, treat the exposed pad as a thermal and electrical connection point and follow the manufacturer land-pattern and thermal-via guidance. Confirm the device pin names against the manufacturer pinout table, and place the external decoupling capacitors close to their associated supply pins to limit impedance in fast-switching current paths. This page combines manufacturer-family specifications, same-footprint device comparisons, and practical implementation guidance to help engineers evaluate the EFM32TG210F16-D-QFN32 for compact, low-power embedded control designs.

詢價 聯絡我們
EFM32TG210F16-QFN32 - 32MHz Cortex-M3 16KB MCU | Silicon Labs
EFM32TG210F16-QFN32

EFM32TG210F16-QFN32 - 32MHz Cortex-M3 16KB MCU | Silicon Labs

The Silicon Labs EFM32TG210F16-QFN32 is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller with a 32 MHz maximum operating frequency, 16 KB of flash memory, and a 32-QFN 6 x 6 mm package. The device combines a low-power embedded architecture with integrated analog and digital peripherals, making it suitable for energy-sensitive embedded systems that require deterministic control and low standby consumption. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces into one package. The EFM32TG series belongs to the MCU and embedded-processor hierarchy and combines ARM Cortex-M3 processing with energy-saving modes, autonomous peripheral operation, and fast wake-up behavior. These features distinguish it from conventional higher-power microcontroller platforms designed primarily for continuous operation. Verified distributor information identifies the EFM32TG210F16-QFN32 as an ARM Cortex-M3 Tiny Gecko MCU with 32-bit processing, 32 MHz operation, 16 KB flash organized as 16K x 8, and a 32-QFN 6 x 6 mm package. Silicon Labs materials also describe EFM32TG devices as low-power devices with energy-saving modes and autonomous peripherals. The available distributor listing indicates AES and operational-amplifier functionality, but exact peripheral counts and detailed electrical limits are not provided in the supplied data. The EFM32TG210F16-QFN32 is intended for applications where low power, compactness, and integrated control are more important than maximum flash capacity. Its 32 MHz Cortex-M3 core supports general embedded control, while the Tiny Gecko low-power platform supports battery-operated equipment. The 16 KB flash memory is modest compared with larger general-purpose MCUs, so firmware should be evaluated for image size and update requirements before design commitment. Typical uses include low-power sensor nodes, compact industrial controllers, battery-powered measurement equipment, consumer accessories, and embedded control modules. For designs requiring more program storage, the EFM32TG210F32-QFN32 family member provides 32 KB flash according to the manufacturer page and should be checked for footprint, memory, and peripheral compatibility. The device should also be reviewed against the application’s supply-voltage, temperature, and qualification requirements. Designers should place the decoupling network close to the device supply pins, keep analog and digital return-current paths controlled, and confirm the exposed-pad connection and thermal strategy against the package drawing. The QFN package is compact but not leaded, so assembly capability and soldering profile should be reviewed before production release. Use the manufacturer datasheet and reference design guidance for final pin, layout, and peripheral configuration decisions. This page combines verified manufacturer and distributor information, a transparent alternative comparison, and practical design guidance intended to help engineers evaluate fit, footprint, memory, low-power behavior, and sourcing constraints before selecting the EFM32TG210F16-QFN32.

詢價 聯絡我們
EFM32TG210F16-QFN32T - 32MHz Cortex-M3 16KB MCU | Silicon Labs
EFM32TG210F16-QFN32T

EFM32TG210F16-QFN32T - 32MHz Cortex-M3 16KB MCU | Silicon Labs

Silicon Labs EFM32TG210F16-QFN32T is a 32-bit ARM Cortex-M3 microcontroller with a 32 MHz clock, 16 KB of Flash memory, and a 32-pin QFN 6 x 6 mm package. It is designed for low-power embedded systems, combining a RISC processor, integrated analog and communication peripherals, and energy-saving sleep modes in one compact surface-mount device. An ultra-low-power microcontroller is a semiconductor designed to maintain useful processing performance while minimizing energy consumption during active and idle operation. The EFM32 Tiny Gecko family combines an ARM Cortex-M3 CPU with autonomous peripherals and dedicated low-power hardware. This allows a system to monitor or control external activity while the processor sleeps, reducing the time and energy required for wake-up and repeated polling. Key characteristics include a 32 MHz maximum operating frequency, 16 KB Flash, 4 KB RAM, AES hardware support, three operational amplifiers, and a 1.85 V to 3.8 V supply range. The MCU can reach as little as 0.6 µA in Stop mode and 150 µA/MHz in Run mode. Its Cortex-M3 implementation includes a Memory Protection Unit supporting up to eight memory segments and a Wake-up Interrupt Controller for events occurring while the CPU is asleep. The Cortex-M3 core is a 32-bit RISC processor capable of delivering as much as 1.25 Dhrystone MIPS/MHz. Integrated energy-management peripherals let the device retain peripheral operation in low-energy states, reducing software overhead for short wake-up cycles. The 32-pin QFN package also supports compact PCB layouts while providing the analog and mixed-signal resources expected from a Tiny Gecko-series embedded controller. Typical uses include battery-powered sensor nodes, compact industrial monitors, low-power IoT endpoints, energy-harvesting equipment, and portable measurement products. The 16 KB Flash capacity suits compact control firmware, while the integrated operational amplifiers and AES capability can simplify analog measurement and secure data handling without requiring separate components in every design. PCB design should preserve access to all 32 package pins and provide appropriate decoupling near the supply terminals. Confirm the exact pin assignments and exposed-pad requirements in the manufacturer datasheet before routing a new board. Software development should use the EFM32 device header, startup files, linker configuration, and programming tooling matching this specific MCU and Flash density. This product overview combines the core EFM32TG210 specifications, documented replacement status, package details, and engineering selection considerations. It also distinguishes direct same-package options from functionally similar devices that require firmware, memory, or peripheral validation before substitution.

詢價 聯絡我們
EFM32TG210F32-D-QFN32 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG210F32-D-QFN32

EFM32TG210F32-D-QFN32 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG210F32-D-QFN32 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 KB of Flash memory, 4 KB of RAM, and 24 digital I/O pins, housed in a 32-pin QFN package measuring 6 x 6 mm. Its combination of low-power operating modes, fast wake-up capability, and integrated peripherals suits energy-sensitive embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals such as timers, serial interfaces, analog functions, and GPIO on one device. The EFM32TG series belongs to the 32-bit MCU hierarchy and uses the ARM Cortex-M3 RISC architecture. This class of device provides greater processing capacity than an 8- or 16-bit MCU while supporting low-power operation for battery-operated equipment. The EFM32TG210F32-D-QFN32 includes 32 KB of Flash for firmware and 4 KB of SRAM for working data. Its CPU operates at up to 32 MHz, and the device provides two 16-bit timers and 24 digital I/O pins. The Tiny Gecko platform also features autonomous peripheral operation, allowing timer and communication activities to continue with limited processor intervention. Run-mode consumption is specified at 150 microamperes per megahertz, while Stop mode can reach 0.6 microamperes. The ARM Cortex-M3 core uses a 32-bit RISC instruction set and can achieve as much as 1.25 Dhrystone MIPS per megahertz. A memory protection unit supports as many as eight memory segments, and the Wake-up Interrupt Controller handles events that occur while the processor is asleep. These features allow responsive interrupt-driven designs without keeping the CPU continuously active. Typical applications include wearable sensors, compact industrial nodes, battery-powered remote controls, connected IoT equipment, and portable measurement instruments. The 32 MHz processing rate is suitable for protocol handling, state-machine control, data acquisition, and low-to-moderate-bandwidth communications. The 24 GPIO pins also permit direct connection of switches, indicators, sensors, and actuators. PCB design should preserve the exposed-pad thermal and electrical requirements of the QFN package. Place decoupling capacitors close to the power pins, connect the exposed pad to the appropriate ground plane, and follow the manufacturer pin description table when assigning tracks. Confirm the selected package dimensions and exposed-pad treatment against the manufacturer datasheet before fabrication. This product page combines the manufacturer specifications, package information, application guidance, and practical design considerations in one engineering reference. It also distinguishes pin-compatible family alternatives while identifying where package, memory, or peripheral differences require design review.

詢價 聯絡我們
EFM32TG210F32-QFN32 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG210F32-QFN32

EFM32TG210F32-QFN32 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG210F32-QFN32 is an ARM Cortex-M3 microcontroller with a maximum clock speed of 32 MHz, 32 kB of Flash memory, 4 kB of RAM, and a 32-QFN 6 x 6 mm package. The device provides 24 digital I/O pins and is designed for energy-sensitive embedded systems requiring compact size, low-power operation, and fast wake-up performance. An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-compute embedded processor. Microcontrollers combine a processor core, Flash program memory, RAM, clocks, communications peripherals, timers, analog interfaces, and general-purpose I/O in one integrated circuit. The EFM32 Tiny Gecko family extends this MCU hierarchy with low-energy operating techniques designed for battery-operated and intermittently powered equipment. Key features include an ARM Cortex-M3 core operating up to 32 MHz, 32 kB Flash, 4 kB RAM, 24 digital I/O pins, and two 16-bit timers. The low-power platform includes energy-saving modes and fast wake-up behavior. Its 32-QFN package occupies only 6 x 6 mm, making it suitable for space-constrained control and sensing products. The EFM32TG210F32-QFN32 integrates an ARM Cortex-M3 processor with a precision internal voltage regulator, oscillators, timers, GPIO, serial interfaces, and low-power control logic. According to the manufacturer documentation, the Cortex-M3 architecture includes a 32-bit RISC processor, a Memory Protection Unit supporting as many as eight memory segments, and a Wake-up Interrupt Controller for events occurring while the processor sleeps. Typical uses include battery-powered sensor nodes, compact industrial controls, energy-harvesting equipment, portable instruments, and connected accessories. The combination of 32-bit processing, 4 kB RAM, and 24 digital I/O pins supports control logic, communication protocols, and multiple peripheral functions without requiring a separate processor. Board design should preserve the exact package footprint, power-decoupling structure, exposed-pad connection, and programming interface specified by the manufacturer. Confirm pin multiplexing, peripheral availability, and low-power mode requirements in the EFM32TG210 datasheet and the EFM32 Cortex-M3 Reference Manual before finalizing the PCB and firmware. This page consolidates the core device specifications, application guidance, verified source links, and same-family drop-in alternatives. It also identifies where package, pin, pricing, and lifecycle details must be confirmed directly with Silicon Labs before production release.

詢價 聯絡我們
EFM32TG210F8-D-QFN32 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG210F8-D-QFN32

EFM32TG210F8-D-QFN32 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG210F8-D-QFN32 is a 32-bit ARM Cortex-M3 microcontroller with a 32 MHz maximum clock, 8 kB of Flash memory, 2 kB of RAM, and 24 digital I/O pins in a 32-pin QFN package with an exposed pad. It combines a compact memory footprint with energy-saving modes and fast wake-up behavior for embedded systems that prioritize low power. An EFM32 microcontroller is an embedded processor platform that integrates a CPU, memory, analog and digital peripherals, interrupt control, and energy-management functions into one device. The EFM32TG210 belongs to the Tiny Gecko family, where the ARM Cortex-M3 processor operates within a system designed for both performance-sensitive control and low-current standby operation. This hierarchy places the device among 32-bit microcontrollers, embedded processors, and general-purpose semiconductor components. The Tiny Gecko architecture operates at up to 32 MHz and includes two 16-bit timers, digital I/O, AES hardware support, and an operational amplifier according to the product listing. Energy-sensitive operation is supported by consumption as low as 0.6 µA in Stop mode and approximately 150 µA/MHz in Run mode. These characteristics make the controller useful in battery-operated products where duty-cycled sensing and measurement must coexist with responsive control firmware. The EFM32TG210F8-D-QFN32 uses 8 kB Flash for program storage and 2 kB RAM for working data. Its integrated analog features can reduce the need for external signal-conditioning components in compact sensor nodes, while the 24 digital I/O pins support switches, indicators, communications, and external control signals. The exposed-pad QFN construction also provides a thermal path through PCB copper, making package layout an important part of reliable operation. Typical uses include connected sensor nodes, compact industrial monitors, wearable accessories, low-power measurement instruments, and consumer products that wake briefly to acquire or transmit data. In these systems, the MCU acts as the central controller: it samples inputs, executes embedded algorithms, manages timers, controls peripherals, and returns to a low-energy state whenever the measurement cycle is complete. Designers should follow the manufacturer pin-description table when assigning every QFN signal and must preserve the exposed-pad connection to the appropriate PCB plane. Place decoupling capacitors close to the supply pins, confirm oscillator and reset requirements in the device datasheet, and calculate the duty-cycle-dependent average current before selecting the power source. This page combines the core device specifications, engineering comparisons, application guidance, and practical design notes needed to evaluate the EFM32TG210F8-D-QFN32.

詢價 聯絡我們
EFM32TG210F8-D-QFN32R - 32MHz ARM Cortex-M3 MCU | Silicon Labs (Tape & Reel)
EFM32TG210F8-D-QFN32R

EFM32TG210F8-D-QFN32R - 32MHz ARM Cortex-M3 MCU | Silicon Labs (Tape & Reel)

The Silicon Labs EFM32TG210F8-D-QFN32R is a 32-bit ARM Cortex-M3 microcontroller with a 32 MHz maximum clock, 8 kB of Flash memory, 2 kB of RAM, and 24 digital I/O pins in a 32-pin QFN package with an exposed pad. It combines a compact memory footprint with energy-saving modes and fast wake-up behavior for embedded systems that prioritize low power. An EFM32 microcontroller is an embedded processor platform that integrates a CPU, memory, analog and digital peripherals, interrupt control, and energy-management functions into one device. The EFM32TG210 belongs to the Tiny Gecko family, where the ARM Cortex-M3 processor operates within a system designed for both performance-sensitive control and low-current standby operation. This hierarchy places the device among 32-bit microcontrollers, embedded processors, and general-purpose semiconductor components. The Tiny Gecko architecture operates at up to 32 MHz and includes two 16-bit timers, digital I/O, AES hardware support, and an operational amplifier according to the product listing. Energy-sensitive operation is supported by consumption as low as 0.6 µA in Stop mode and approximately 150 µA/MHz in Run mode. These characteristics make the controller useful in battery-operated products where duty-cycled sensing and measurement must coexist with responsive control firmware. The EFM32TG210F8-D-QFN32R uses 8 kB Flash for program storage and 2 kB RAM for working data. Its integrated analog features can reduce the need for external signal-conditioning components in compact sensor nodes, while the 24 digital I/O pins support switches, indicators, communications, and external control signals. The exposed-pad QFN construction also provides a thermal path through PCB copper, making package layout an important part of reliable operation. Typical uses include connected sensor nodes, compact industrial monitors, wearable accessories, low-power measurement instruments, and consumer products that wake briefly to acquire or transmit data. In these systems, the MCU acts as the central controller: it samples inputs, executes embedded algorithms, manages timers, controls peripherals, and returns to a low-energy state whenever the measurement cycle is complete. Designers should follow the manufacturer pin-description table when assigning every QFN signal and must preserve the exposed-pad connection to the appropriate PCB plane. Place decoupling capacitors close to the supply pins, confirm oscillator and reset requirements in the device datasheet, and calculate the duty-cycle-dependent average current before selecting the power source. This page combines the core device specifications, engineering comparisons, application guidance, and practical design notes needed to evaluate the EFM32TG210F8-D-QFN32R.

詢價 聯絡我們
EFM32TG210F8-QFN32 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG210F8-QFN32

EFM32TG210F8-QFN32 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG210F8-QFN32 is an ARM Cortex-M3 microcontroller operating up to 32 MHz, with 8 kB Flash, 2 kB RAM, 24 digital I/O pins, and two 16-bit timers in a 32-QFN package. Its supply range is 1.85 V to 3.8 V. Designed around the Tiny Gecko low-power platform, the device targets energy-sensitive embedded products that need responsive control, compact size, and low-power operation. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, digital interfaces, timers, and supporting peripherals on one semiconductor device. The EFM32TG210F8-QFN32 uses the ARM Cortex-M3 architecture, placing it within the 32-bit embedded MCU -> microcontroller -> semiconductor hierarchy. Its combination of 32 MHz processing and 8 kB Flash makes it appropriate for compact control tasks rather than resource-heavy edge-computing workloads. Key features include a 32 MHz ARM Cortex-M3 core, 8 kB Flash memory, 2 kB RAM, 24 digital I/O pins, and two 16-bit timers. The official product description also identifies low-energy techniques, fast wake-up behavior, and energy-saving modes. These characteristics suit systems that spend substantial time between active operations while retaining deterministic access to embedded peripherals. The device belongs to Silicon Labs' Tiny Gecko family and provides an integrated AES and operational-amplifier feature set according to distributor product data. Its 1.85 V to 3.8 V operating range allows use in low-voltage embedded designs, while the 32-QFN 6x6 mm package supports compact PCB layouts. Exact peripheral availability, electrical limits, pin functions, and tool-support details should be confirmed against the manufacturer documentation before production design release. Typical applications include battery-powered sensing, compact industrial controllers, wearable or accessory electronics, low-power embedded nodes, and portable instruments. In these systems, the MCU can execute firmware, operate timers, read inputs, and control outputs while using its low-power platform to reduce activity outside the required measurement or control intervals. Designers should verify the QFN land pattern, exposed-pad connection, pin multiplexing, decoupling requirements, and supported voltage range in the manufacturer documentation. The 6x6 mm QFN package also requires careful PCB layout and assembly process control to achieve reliable thermal and electrical performance.

詢價 聯絡我們
EFM32TG210F8-QFN32T - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG210F8-QFN32T

EFM32TG210F8-QFN32T - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG210F8-QFN32T is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 8 kB of Flash memory, 2 kB of RAM, 24 digital I/O pins, and AES hardware encryption in a 32-QFN 6 x 6 mm package. Its 1.85 V to 3.8 V operating range supports energy-efficient embedded designs. The device also provides three operational amplifiers and two 16-bit timers, making it suitable for compact sensing, control, and connected products. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. Within the hierarchy of embedded semiconductors, the EFM32TG210F8-QFN32T is an ARM Cortex-M3 MCU, an energy-focused 32-bit embedded controller used for battery-operated equipment, industrial controls, consumer accessories, and connected sensors. Its low-energy operating techniques and short wake-up behavior are particularly relevant when the product spends substantial time in sleep or deep-sleep modes. Key features include an ARM Cortex-M3 processor core with a maximum clock frequency of 32 MHz, 8 kB Flash for firmware storage, 2 kB SRAM for working memory, and AES encryption support. The integrated peripheral set includes 24 digital I/O pins, two 16-bit timers, and three operational amplifiers. These resources allow a design to combine control logic, signal conditioning, and communications functions without relying on several separate discrete components. The Tiny Gecko architecture integrates processing, low-power management, and energy-sensitive peripherals in one system-on-chip design. Its 1.85 V to 3.8 V supply range permits operation across low-voltage embedded systems, while the 32 MHz Cortex-M3 core provides substantially more processing capability than an 8-bit controller. The three integrated op-amps can reduce the component count in sensor, measurement, and analog-interface designs when their input, output, and stability requirements match the device specifications. Typical applications include battery-powered sensor nodes, industrial monitoring modules, compact access-control products, wearable accessories, and energy-conscious embedded controls. The microcontroller can execute protocol and control firmware in Flash, retain transient data in its 2 kB SRAM, and use its timers and op-amps to support periodic measurements or analog signal conditioning. The manufacturer product page identifies the EFM32TG210F8-QFN32 family as being optimized for energy-sensitive applications. Designers should verify the exact QFN pin assignment, exposed-pad requirements, decoupling, and operating limits against the manufacturer datasheet before layout. Firmware must also account for the limited 8 kB Flash and 2 kB RAM budgets. Confirming the complete pinout, peripheral multiplexing, and PCB land pattern is essential because this page only uses values explicitly present in the supplied verified sources. This page consolidates verified manufacturer and distributor information, distinguishes electrically compatible family alternatives, and adds practical selection guidance for engineers evaluating the EFM32TG210F8-QFN32T. It also highlights where additional datasheet data is required rather than substituting unverified electrical, package, pricing, or lifecycle assumptions.

詢價 聯絡我們