產品(44,000+)

EFM32LG880F256G-E-QFP100 - 48MHz ARM Cortex-M3 MCU 256KB | Silicon Labs
EFM32LG880F256G-E-QFP100

EFM32LG880F256G-E-QFP100 - 48MHz ARM Cortex-M3 MCU 256KB | Silicon Labs

The Silicon Labs EFM32LG880F256G-E-QFP100 is a 32-bit ARM Cortex-M3 Leopard Gecko microcontroller delivering up to 48 MHz CPU performance with 32 kB SRAM and 256 kB flash, housed in a 100-pin LQFP (14x14 mm) package. It features an integrated LCD controller, 86 digital I/O pins, four 16-bit timer/counters, and a 12-bit ADC, making it a full-featured ultra-low-power MCU for energy-sensitive human-interface applications. A 32-bit microcontroller (MCU) is an embedded processor that integrates a CPU core, memory, and peripherals onto a single silicon die. Within the embedded computing hierarchy, an MCU occupies the tier below microprocessors - it sacrifices raw clock speed for deterministic real-time behavior, on-chip memory, and ultra-low standby current. ARM Cortex-M3 cores follow the ARMv7-M architecture with Thumb-2 instruction set, hardware divide-divide, and bit-banding for atomic bit manipulation. The Leopard Gecko (EFM32LG) family adds Silicon Labs' proprietary energy-management peripheral set, making the line a derivative of the energy-friendly EFM32 platform originally developed by Energy Micro and now consolidated under the Silicon Labs portfolio. Key features include 0.65 uA deep-sleep current in Stop mode, 211 uA/MHz active current in Run mode, autonomous peripherals that operate in sleep, a hardware AES-128 crypto accelerator, and a low-energy UART that can wake the part on a start bit without CPU intervention. The integrated segmented LCD driver supports up to 8x36 segments and is designed for direct bias of low-power glass displays. Supply voltage spans 1.98 V to 3.8 V from a single rail. Typical applications include battery-powered smart thermostats, wearable fitness bands, electronic shelf labels, remote sensor nodes, and portable medical monitors where years of operation on a coin cell are required. The wide pin-count and LCD interface make it ideal for human-interface end equipment such as industrial HMIs, e-meter displays, and the user-interface panel of home appliances.

詢價 聯絡我們
EFM32LG895F256G - 48MHz ARM Cortex-M3 MCU, 256KB Flash | Silicon Labs
EFM32LG895F256G

EFM32LG895F256G - 48MHz ARM Cortex-M3 MCU, 256KB Flash | Silicon Labs

The Silicon Labs EFM32LG895F256G-F-BGA120 is an ultra-low-energy ARM Cortex-M3 microcontroller (MCU) from the Leopard Gecko family, running up to 48 MHz with 256 kB of Flash and 32 kB of RAM in a 120-pin BGA (7x7 mm) package. It provides 93 digital I/O pins, four 16-bit timer/counters, a 12-bit ADC, and a rich set of serial interfaces (USART, SPI, I2C, USB) while operating from a 1.98 V to 3.8 V supply. An ARM Cortex-M3 microcontroller is a 32-bit RISC processor core from the ARM Cortex family optimized for embedded applications that demand deterministic real-time response, low power consumption, and a strong ecosystem of tools and RTOS support. Cortex-M3 sits in the broader hierarchy: ARM Cortex-M -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The EFM32LG family specifically extends Cortex-M3 with Silicon Labs' energy-aware peripherals and innovative low-energy techniques such as the Peripheral Reflex System and energy-saving sleep modes. Key features include a 48 MHz Cortex-M3 core with hardware division and single-cycle multiply, 256 kB Flash program memory, 32 kB SRAM, an integrated 12-bit 1 Msps SAR ADC, multiple communication peripherals including USB, and energy modes that drop current below 1 µA in deep sleep. The 120-BGA package exposes the full peripheral set, including up to 93 GPIO, hardware crypto (AES), and a low-energy RTC suitable for battery-powered always-on designs. The architecture centers on an aggressive energy scheme: active mode draws roughly 23 µA/MHz at 48 MHz, while deep-sleep mode drops to ~1 µA with RTC running and RAM retention. The Peripheral Reflex System lets peripherals operate autonomously without waking the core, dramatically reducing average power for sensor sampling, human-interface, and metering applications. Typical applications include battery-powered IoT nodes, wearable health devices, smart energy metering, wireless sensor networks, industrial sensor hubs, and USB peripherals that need a low-power 32-bit MCU with a generous GPIO count. Designers should pair it with an external EFR32 sub-GHz or Bluetooth radio for connected products. When designing, allocate adequate decoupling (one 100 nF per supply pin cluster plus a 4.7 µF bulk) and follow Silicon Labs' BGA fan-out recommendations for the 7x7 mm 120-ball package. Use Simplicity Studio and the CMSIS-Pack for peripheral drivers to accelerate firmware development. This page synthesizes distributor availability, drop-in variants within the Leopard Gecko line, and practical application examples not consolidated in the EFM653 family datasheet.

詢價 聯絡我們
EFM32LG895F256G-F-BGA120 - 32-bit ARM Cortex-M3 MCU 256KB Flash | Silicon Labs
EFM32LG895F256G-F-BGA120

EFM32LG895F256G-F-BGA120 - 32-bit ARM Cortex-M3 MCU 256KB Flash | Silicon Labs

The Silicon Labs EFM32LG895F256G-F-BGA120 is an ultra-low-power 32-bit ARM Cortex-M3 microcontroller (MCU) from the Leopard Gecko family, operating at up to 48 MHz and integrating 256 KB Flash and 32 KB RAM in a 120-pin BGA (7x7 mm) package. Built on a low-energy platform with innovative energy modes, fast wake-up times, and an autonomous peripheral reflex system, the Leopard Gecko family targets battery-powered and energy-sensitive applications including IoT sensors, wearable medical devices, and remote controls. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, and integrated peripherals such as timers, ADCs, communication interfaces, and GPIO. The ARM Cortex-M3 core belongs to the ARM Cortex-M hierarchy of processors designed for embedded deterministic real-time control, sitting above Cortex-M0/M0+ in performance and below Cortex-M4/M7 in DSP capability. The Leopard Gecko product family is part of the broader Silicon Labs EFM32 (Energy Friendly Microcontroller) 32-bit MCU line, itself a subset of the microcontroller category within the wider semiconductor hierarchy. Key specifications include 93 digital I/O pins, 4 x 16-bit timer/counters, 12-channel DMA controller, multiple serial interfaces (USART, UART, SPI, I2C, USB), a 12-bit 1 Msps ADC, 2 x 12-bit DAC, and ultra-low standby current as low as 1.1 uA with RTC retention. The architecture supports five energy modes (EM0-EM4) allowing the active core to drop to deep sleep while peripherals such as the ADC, LEUART, or RTC remain operational. Hardware AES-128/256 cryptography and a true random number generator (TRNG) are integrated for secure IoT endpoints. The Cortex-M3 core delivers 1.25 DMIPS/MHz with single-cycle multiply and hardware divide, paired with a Memory Protection Unit (MPU) and wake-up interrupt controller supporting deterministic sub-microsecond interrupt latency. A peripheral reflex system (PRS) routes peripheral events directly between peripherals without CPU intervention, enabling sensor fusion and energy harvesting circuits that draw essentially zero active CPU current. This autonomous event fabric is a key reason Leopard Gecko parts are selected for wireless sensor nodes and energy-harvesting applications. Typical applications include IoT wireless sensor nodes, wearable health monitoring devices, smart metering, home automation gateways, industrial control panels, asset tracking, alarm/security panels, and battery-powered instrumentation. The 120-pin BGA package provides 93 GPIO and a wide peripheral mix in a 7x7 mm footprint suitable for compact, cost-optimized boards. The device is also used as the host MCU behind Silicon Labs EFR32 Wireless Gecko radios in combined MCU + radio designs. When designing with this part, choose the proper operating voltage rail (1.98-3.8 V), place a 1 uF decoupling cap at each VDD pin, and use a low-ERTC crystal to minimize standby current. Software development is supported by Simplicity Studio with energyAware Profiler, providing real-time current consumption visualization across the five energy modes. This page synthesizes 2026 distributor pricing, BGA-120 cross-references, and energy-mode design notes that go beyond the manufacturer datasheet summary, providing actionable sourcing and engineering guidance for embedded designers.

詢價 聯絡我們
EFM32LG940F64-QFN64 - 48MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32LG940F64-QFN64

EFM32LG940F64-QFN64 - 48MHz ARM Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32LG940F64-QFN64 is a 32-bit ARM Cortex-M3 Leopard Gecko microcontroller with a 48 MHz maximum clock, 64 KB of Flash memory and 32 KB of SRAM in a 64-pin QFN package. The device operates from 1.98 V to 3.8 V and integrates an ARM Cortex-M3 processor, energy-sensitive peripherals and mixed-signal resources for low-power embedded control. A microcontroller is the central programmable controller in an embedded electronic system. It executes instructions, reads sensors, controls actuators and manages communications. The EFM32LG family belongs to the hierarchy of 32-bit microcontroller, embedded processor, semiconductor and system-on-chip. Its Cortex-M3 architecture provides a practical balance of processing performance, deterministic peripheral operation and energy efficiency for battery-powered and industrial equipment. The EFM32LG940F64-QFN64 supports operation up to 48 MHz while providing 64 KB of Flash organized as 64K x 8. Its 32 KB SRAM supports working data, stack storage and interrupt servicing. Silicon Labs emphasizes low power consumption across the family, with Run-mode consumption stated as 211 uA/MHz and Stop-mode consumption as low as 0.65 uA. These characteristics make the controller suitable where duty-cycled sensing, compact dimensions and predictable standby behavior are important. The Leopard Gecko architecture incorporates autonomous peripherals, allowing time-critical tasks such as timer, counter, PWM, UART and ADC operations to continue with limited processor intervention. High analog integration reduces the need for discrete interface components, while fast wake-up behavior supports designs that spend much of their operating cycle in a low-energy state. The 64-pin QFN package also exposes the device's GPIO, communications and analog resources in a compact surface-mount footprint. Typical applications include industrial sensor nodes, portable medical accessories, low-power instrumentation, connected building equipment, compact energy-monitoring devices and battery-operated products. The combination of 64 KB Flash, 32 KB SRAM and a 48 MHz Cortex-M3 core is suitable for moderate control workloads that need more capability than an 8- or 16-bit microcontroller but do not require a high-performance application processor. PCB design should preserve short return paths for ground, analog and digital supply connections while following the manufacturer pin-description table for every QFN-64 signal. Place decoupling capacitors close to the supply pins, reserve a continuous ground plane under the device and follow the package land pattern and exposed-pad soldering requirements exactly. This page combines the family's power characteristics, device variants, package constraints and application guidance into a practical engineering overview. It also highlights same-footprint EFM32LG940 options for engineers comparing Flash capacity, temperature grade or ordering suffix before finalizing a design.

詢價 聯絡我們
EFM32LG942F64-QFP64 - 48MHz Cortex-M3 MCU | Silicon Labs
EFM32LG942F64-QFP64

EFM32LG942F64-QFP64 - 48MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32LG942F64-QFP64 is a 32-bit Arm Cortex-M3 microcontroller operating up to 48 MHz, with 64 KB of Flash memory and 32 KB of RAM in a 64-pin TQFP package measuring 10 mm by 10 mm. Its 1.98 V to 3.8 V supply range supports low-voltage embedded systems. A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and communication interfaces on one integrated circuit. The EFM32LG belongs to the Leopard Gecko family, a 32-bit MCU family positioned for low-power embedded control. Its hierarchy extends from the EFM32LG series to the Arm Cortex-M3 processor class, general-purpose microcontrollers, and embedded semiconductors. The EFM32LG942F64-QFP64 emphasizes energy-efficient operation. Silicon Labs specifies consumption as low as 0.65 µA in Stop mode and 211 µA/MHz in Run mode. Autonomous peripherals can perform designated tasks while the processor sleeps, reducing the energy required for sensor acquisition, timing, communications, and control-loop operation. The 64 KB Flash configuration supports firmware storage, while 32 KB of RAM accommodates working data, stack space, and peripheral buffers. Its 32-bit Arm Cortex-M3 core combines deterministic interrupt handling with an efficient instruction set and operates at up to 48 MHz. The device also integrates extensive analog and digital resources into the same package. This high level of integration can reduce external component count on compact sensor nodes, industrial control modules, and connected accessories while preserving a common peripheral architecture across the EFM32LG family. Typical uses include battery-powered environmental sensors, building-control endpoints, industrial monitoring nodes, compact health-and-wellbeing products, and low-power wireless accessories. The Stop-mode current is particularly relevant to devices that spend most of their operating cycle asleep and wake periodically to measure or transmit information. The 48 MHz processing rate also provides enough performance for protocol handling, local filtering, and control without requiring a higher-power processor. PCB design should preserve clean supply distribution, connect decoupling capacitors close to the supply pins, and route high-speed signals away from analog inputs and switching nodes. Firmware and peripheral configuration must match the selected pin assignments. Use the EFM32LG data sheet and device programming documentation to confirm package pin functions, programming connections, clock settings, and the applicable temperature-grade ordering code before production release. This product page combines core memory, power, package, and processor specifications with drop-in family alternatives, application guidance, comparison criteria, and practical design considerations. It is intended to accelerate component selection while keeping PCB footprint, firmware support, and low-power design requirements in view.

詢價 聯絡我們
EFM32PG12B500F1024G - 40MHz Cortex-M4 Pearl Gecko MCU 1MB Flash
EFM32PG12B500F1024G

EFM32PG12B500F1024G - 40MHz Cortex-M4 Pearl Gecko MCU 1MB Flash

The Silicon Labs EFM32PG12B500F1024G is an ARM Cortex-M4 microcontroller from the Pearl Gecko family, operating at up to 40 MHz with DSP instructions and a single-precision floating point unit, and integrating 1 MB of flash and 256 KB of RAM. It is supplied from a 1.8 V to 3.8 V VDD rail and is offered in low-power BGA, QFN, QFP and CSP packages across the family. It is one of several similar MCU products in the Pearl Gecko 12 family that an EFM32PG12B500F1024G is designed into. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit processor core, program memory (typically flash), data memory (RAM), and a rich set of peripherals on a single silicon die. Cortex-M4 cores such as the one in the EFM32PG12B500F1024G occupy the middle tier of the ARM Cortex-M hierarchy (between Cortex-M0+ and Cortex-M7) and add DSP extensions plus an optional FPU for efficient signal-processing and floating-point math. Pearl Gecko devices sit within Silicon Labs' broader 32-bit EFM32 portfolio (Gecko -> Giant Gecko, Pearl Gecko, Happy Gecko, Tiny Gecko, Zero Gecko) and target energy-sensitive connected applications. Key features of the EFM32PG12B500F1024G include hardware AES-128/256 encryption, a true random number generator (TRNG), a 12-bit 1 Msps ADC, DACs, comparators, multiple timers, USART/UART/SPI/I2C peripherals, a USB 2.0 Full-Speed device/host controller, and a low-energy sensor interface (LESENSE). The 12-bit ADC and LESENSE peripheral enable direct interfacing with analog sensors while keeping the CPU asleep, and the integrated crypto accelerators support secure firmware updates and authenticated communications. Architecturally, the EFM32PG12B500F1024G uses Silicon Labs' energy-friendly design with five low-energy modes (EM0-EM4) achieving sub-microamp sleep current, autonomous peripherals that wake the core only on real events, and a wide 1.8 V to 3.8 V supply range that simplifies battery-powered design. The combination of DSP+FPU and energy-aware peripherals allows deterministic signal processing at low average power. Typical applications include battery-powered IoT sensor hubs, smart home and building automation nodes, wearable health and fitness devices, industrial wireless sensor nodes, secure connected medical peripherals, and low-power human-machine interface controllers. The wide memory and rich peripherals also suit the Cortex-M4 for metering hubs, Z-wave and Zigbee wireless MCUs, and machine learning edge inference on sensor data. When designing with this part, pay attention to decoupling (place 100 nF plus bulk capacitors near each VDD pin), the exposed thermal pad on QFN/BGA variants must be soldered for mechanical reliability, and unused pins should be configured to their lowest-power state via the Device Configurator in Simplicity Studio. This page synthesizes distributor pricing, drop-in alternatives and practical design notes that are not duplicated on the manufacturer's product page, supporting faster component evaluation.

詢價 聯絡我們
EFM32PG12B500F1024GL125-C - 40MHz ARM Cortex-M4 MCU | Silicon Labs
EFM32PG12B500F1024GL125-C

EFM32PG12B500F1024GL125-C - 40MHz ARM Cortex-M4 MCU | Silicon Labs

The Silicon Labs EFM32PG12B500F1024GL125-C is an ARM Cortex-M4 based 32-bit MCU running up to 40 MHz, with 1 MB of Flash and 256 KB of RAM, housed in a 125-ball BGA (7x7 mm) package and rated for -40C to +125C operation. This Pearl Gecko family member integrates the full DSP instruction set and a single-precision floating-point unit, accelerating computation in signal-processing and control loops. A hardware True Random Number Generator, AES cryptographic accelerator, and Security Management Unit are on-chip, alongside a capacitive-touch sense peripheral. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripherals. In the broader taxonomy, the EFM32PG12 sits within the Cortex-M4 sub-family of ARM 32-bit microcontrollers, which belong to the wider class of embedded processors and SoCs. Pearl Gecko parts are positioned at the intersection of mainstream performance (Cortex-M4 with FPU) and ultra-low-power operation (EM0 active in tens of uA/MHz, EM4 deep-sleep measured in nA), which is critical for always-on battery-powered edge nodes. Key features include 1 MB Flash / 256 KB RAM, Cortex-M4 with FPU and DSP, hardware AES-128/256, hardware SHA-1/SHA-2, True Random Number Generator, Secure Debug, robust capacitive-touch sensing, USB, and an extensive peripheral set including ADC, DAC, comparators, timers, and multiple serial interfaces (USART, SPI, I2C, I2S). Low-energy modes (EM0-EM4) deliver sub-uA sleep currents with fast wake-up, making this part ideal for energy-harvesting and coin-cell designs. Typical applications include IoT sensor hubs, smart-home and building-automation nodes, industrial sensor transmitters, secure connected health devices, asset tracking, and human-machine interface controllers with touch. The wide 1.8V to 3.8V supply range, AEC-Q100-style extended temperature rating, and on-die security engine also make it attractive for industrial and harsh-environment deployments. When designing with this device, ensure PCB layout follows Silicon Labs' BGA escape and decoupling guidance - place four-layer stack-up with 0.1uF/10uF decoupling within a few millimeters of the supply balls. Configure the security locks (Debug Lock, OEM Secure Boot) in production firmware and provision unique AES keys to fully leverage the on-chip security engine. This page synthesizes distributor pricing, drop-in Pearl Gecko alternatives, and practical design notes that go beyond the manufacturer datasheet.

詢價 聯絡我們
EFM32PG12B500F1024IM48-C - Pearl Gecko 40MHz Cortex-M4 1MB MCU | Silicon Labs
EFM32PG12B500F1024IM48-C

EFM32PG12B500F1024IM48-C - Pearl Gecko 40MHz Cortex-M4 1MB MCU | Silicon Labs

The Silicon Labs EFM32PG12B500F1024IM48-C is an ARM Cortex-M4 based 32-bit microcontroller from the Pearl Gecko family, running at 40 MHz with 1 MB of Flash and 256 KB of SRAM, housed in a 48-pin QFN (7x7 mm) package. The integrated cryptographic hardware engine, Security Management Unit (SMU), True Random Number Generator (TRNG), and 12-bit ADC make it suitable for connected IoT devices requiring hardware-level security. The device is qualified over the -40C to +125C industrial temperature range (TJ) and ships in tray packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and peripherals onto one die. The Cortex-M4 is a 32-bit RISC processor designed by ARM for embedded applications, featuring single-precision floating-point and DSP extensions. The EFM32 family sits within Silicon Labs' energy-friendly product line, optimized for ultra-low-power active and sleep operation so battery-powered designs can achieve years of runtime. Pearl Gecko specifically targets secure connected-node applications where hardware cryptography and tamper detection matter. Key features of the EFM32PG12B500F1024IM48-C include active current as low as 64 uA/MHz, deep-sleep current of 1.5 uA, a 12-bit 1 Msps ADC, capacitive touch sense hardware, multiple low-energy peripherals (LETIMER, LEUART, I2C), and a flexible peripheral reflex system (PRS) for autonomous inter-peripheral signaling. The 48-QFN (7x7) package exposes all major peripherals including USB, CAN, and a 12-bit DAC. Architecturally, the device combines a high-performance Cortex-M4 core with a Cortex-M0+ auxiliary network processor in some family members (not this one), low-energy peripherals that can run independently of the CPU, and a wide-voltage 1.85V to 3.8V supply. The integrated crypto engine accelerates AES-128/256, ECC, SHA-1/2, and TRNG operations, offloading the main CPU and protecting key material. Typical applications include battery-powered IoT sensor nodes, secure connected health devices, smart metering, industrial HMI panels, capacitive touch interfaces, and wireless sensor gateways (when paired with an external radio). The 1 MB Flash and 256 KB SRAM allow on-device protocol stacks (e.g. Bluetooth Mesh, Thread, or Matter via SDK). When designing with this part, ensure decoupling capacitors are placed close to VDD pins, follow the reference manual's low-energy peripheral routing guidelines, and verify that the chosen development kit (SLSTK3402A or equivalent) supports your SDK version (Simplicity Studio / GSDK). This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
EFM32PG1B100F128GM32-C0R - 40MHz ARM Cortex-M4 MCU, 128KB Flash | Silicon Labs
EFM32PG1B100F128GM32-C0R

EFM32PG1B100F128GM32-C0R - 40MHz ARM Cortex-M4 MCU, 128KB Flash | Silicon Labs

The Silicon Labs EFM32PG1B100F128GM32-C0R is a 32-bit ARM Cortex-M4 microcontroller from the energy-friendly Pearl Gecko family, integrating 128 kB of flash and 32 kB of RAM in a 32-pin QFN (5x5 mm) package with an exposed pad. It runs at up to 40 MHz, includes a single-precision hardware floating-point unit (FPU), and supports the full DSP instruction set for embedded signal processing. The on-chip supply range is 1.85 V to 3.8 V, suiting it directly to single-cell Li-ion or 3.3 V regulated rails. ARM Cortex-M4 microcontrollers are 32-bit processor cores designed for deterministic, low-power embedded applications. They belong to the wider ARM Cortex-M family (Cortex-M0/M0+/M3/M4/M7/M33), which in turn sits within the Cortex processor portfolio and the broader microcontroller (MCU) category of system-on-chip semiconductors. The Pearl Gecko family layers on Silicon Labs' proprietary low-energy peripheral architecture, including energy modes (EM0-EM4), autonomous peripherals that run while the core sleeps, and a hardware crypto engine supporting AES, ECC, and SHA — making this MPN a balanced mix of processing throughput and ultra-low standby current. Key features include the integrated FPU for floating-point math, an AES/ECC/SHA crypto accelerator, a 12-bit ADC, low-energy sensor interfaces, multiple timers, USART/UART, I2C, SPI, and USB-friendly peripherals. The 32-QFN package provides a compact 5x5 mm footprint with a thermal pad that enhances heat spreading during sustained 40 MHz operation. The Pearl Gecko architecture decouples peripherals from the core clock, allowing sensor sampling, communication, and LCD driving to continue in EM2 deep-sleep. This design, plus short wake-up time from energy-saving modes, makes the EFM32PG1B100F128GM32-C0R ideal for any battery-powered application, including wearables, smart sensors, and IoT edge nodes. Typical applications include IoT sensor nodes, wearable fitness/health devices, smart metering, secure connected endpoints, industrial sensor hubs, and battery-powered HMI panels. The integrated crypto engine is particularly attractive for nodes requiring secure TLS-style authentication or firmware attestation. This page synthesizes distributor pricing, Pearl Gecko family drop-in alternatives, and practical low-energy design notes not found on a single manufacturer page.

詢價 聯絡我們
EFM32PG1B200F256GM48 - ARM Cortex-M4 40MHz 256KB Flash MCU | Silicon Labs
EFM32PG1B200F256GM48

EFM32PG1B200F256GM48 - ARM Cortex-M4 40MHz 256KB Flash MCU | Silicon Labs

The Silicon Labs EFM32PG1B200F256GM48 is an ARM Cortex-M4 based 32-bit microcontroller (MCU) in the energy-friendly EFM32 Pearl Gecko family, delivering up to 40 MHz core clock with hardware FPU and full DSP instruction set. The device integrates 256 KB of on-chip Flash and 32 KB of RAM, and is housed in a 48-pin QFN (7x7 mm) package with an exposed thermal pad (QFN-48 / GM48). The supply voltage range is 1.85 V to 3.8 V, making it well suited to single-cell Li-ion, 2xAA, and energy-harvesting designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and programmable peripherals. In the broader taxonomy, the EFM32PG1 sits inside the 32-bit MCU class (Cortex-M sub-family) and the Pearl Gecko product line, positioned between the lower-power Zero Gecko and the higher-pin-count Giant Gecko. Pearl Gecko is specifically marketed as an energy-friendly MCU for battery-powered and always-on IoT applications, with sleep-mode currents in the microamp range and fast wake-up time. Key features include a hardware AES/ECC/SHA cryptographic accelerator, an integrated DC-DC converter, low-energy sensor interface (LESENSE), 12-bit ADC, and a peripheral reflex system that lets peripherals operate autonomously without waking the CPU. These features are paired with active-mode current around 63 uA/MHz and deep-sleep currents well under 2 uA, allowing the part to deliver processing performance while still fitting battery-powered duty cycles. Architecturally, the EFM32PG1 uses the ARM Cortex-M4 core with single-precision FPU, NVIC, and MPU, combined with Silicon Labs' proprietary low-energy peripherals. The hardware crypto engine accelerates AES-128/256, SHA-1/2, and ECC operations, offloading security workloads that would otherwise dominate CPU cycles in TLS or firmware-authentication tasks. Typical applications include battery-powered IoT sensor nodes, wireless metering, wearable health monitors, security/access-control panels, and low-power BLE or sub-GHz SoC companion MCUs. The 40 MHz headroom and DSP extensions also suit local signal conditioning and motor-control state machines in compact systems. When designing with this device, plan decoupling for the DC-DC switch node (per the EFM32PG1 reference design), enable the LFRCO or HFXO depending on accuracy needs, and use Simplicity Studio for peripheral configuration. Be aware that several EFM32PG1 sub-families (JG1, LG1, GG1) differ in flash, RAM, and peripheral counts even at identical packages. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical low-power design notes not found in the standalone datasheet.

詢價 聯絡我們
EFM32PG1B200F256GM48-C0 - 256KB Flash ARM Cortex-M4 MCU | Silicon Labs
EFM32PG1B200F256GM48-C0

EFM32PG1B200F256GM48-C0 - 256KB Flash ARM Cortex-M4 MCU | Silicon Labs

The Silicon Labs EFM32PG1B200F256GM48-C0 is a 32-bit ARM Cortex-M4 microcontroller from the Pearl Gecko family, running at speeds up to 40 MHz with 256 KB of Flash and 32 KB of SRAM, housed in a 48-pin QFN (7x7 mm) package with exposed pad. It integrates a cryptographic hardware engine supporting AES, ECC, and SHA, alongside a full DSP instruction set and a single-precision floating-point unit (FPU), making it suitable for computationally intensive yet energy-constrained designs. An ARM Cortex-M4 microcontroller is a 32-bit processor core based on the ARMv7-M architecture, featuring Thumb-2 instruction set, hardware single-cycle multiply, optional single-precision IEEE 754 floating-point unit, and a tightly coupled Nested Vectored Interrupt Controller (NVIC). Pearl Gecko MCUs sit within the broader hierarchy of ARM Cortex-M MCUs (Cortex-M0/M0+ -> Cortex-M3 -> Cortex-M4 -> Cortex-M7) and are designed for general-purpose embedded applications requiring digital signal processing and low energy operation. Key specifications include an operating voltage range of 1.85 V to 3.8 V, 256 KB of program Flash, 32 KB of SRAM, a peripheral reflex system for autonomous inter-peripheral signaling, and a wide peripheral set including USART, I2C, SPI, timers, ADC, and capacitive touch sensing. The cryptographic accelerator supports AES-128/256, ECC, and SHA-1/SHA-2 with negligible CPU overhead, enabling secure boot, secure firmware update, and authenticated communication in IoT end nodes. Architecturally, the EFM32PG1B200 leverages Silicon Labs' low-energy platform with five energy modes (EM0 active through EM4 deep sleep), autonomous peripherals that operate in deep sleep without CPU intervention, and a fast 2 microsecond wake-up time. The QFN-48 package with exposed thermal pad (EP) provides a thermal resistance suitable for typical indoor and industrial ambient ranges without active cooling. Typical applications include battery-powered IoT sensor nodes, secure connected health devices, smart home and building automation controllers, wireless sensor networks with on-device encryption, industrial HMI panels, and low-power asset tracking tags. The integrated crypto engine and ARM TrustZone-ready architecture make it particularly suitable for edge devices that must perform authenticated transactions without compromising battery life. When designing with this device, allocate PCB copper under the exposed pad for thermal dissipation and ground return. The package's QFN-48 footprint requires careful reflow profile control; IPC/JEDEC J-STD-020 MSL3 handling is recommended. Decoupling requires 100 nF on each VDD pin plus a bulk 4.7 uF, and a 32.768 kHz crystal load capacitor selection must follow the Pearl Gecko reference manual for accurate RTC operation. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet, including cross-brand pin-compatible options sourced from verified distributor cross-reference data.

詢價 聯絡我們
EFM32TG108F16-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG108F16-D-QFN24

EFM32TG108F16-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG108F16-D-QFN24 is an ARM Cortex-M3 microcontroller operating up to 32 MHz, with 16 KB of Flash memory, 4 KB of RAM, and 17 digital I/O pins in a 24-QFN package measuring 5 mm by 5 mm. It combines a low-power MCU architecture with autonomous peripherals and energy-saving modes for embedded control applications. A microcontroller is a programmable semiconductor device that integrates a processor core, memory, digital I/O, timers, and communication peripherals into one compact component. The EFM32TG108 belongs to the Tiny Gecko family within the hierarchy of ARM Cortex microcontrollers, general-purpose embedded processors, and integrated semiconductor devices. Its compact package is intended to support space-constrained and battery-powered equipment. Principal features include a 32-bit ARM Cortex-M3 core, 16 KB Flash, 4 KB RAM, 17 digital I/O pins, and two 16-bit timers. The device operates from a 1.98 V to 3.8 V supply. Silicon Labs reports consumption as low as 0.6 µA in Stop mode and 150 µA/MHz in Run mode, making low-power state management important for duty-cycled designs. The Tiny Gecko platform emphasizes fast wake-up behavior, energy-saving operating modes, and autonomous peripheral operation. These characteristics allow timers and other peripherals to handle repetitive or time-critical tasks while the processor sleeps, reducing unnecessary software activity. The same 16 KB Flash configuration supports firmware storage, while the 4 KB RAM provides working memory for control routines, state handling, and short data buffers. Typical uses include connected sensor nodes, industrial monitoring modules, compact instrumentation, low-energy IoT equipment, and embedded control boards. The 17 GPIO pins allow the MCU to connect digital sensors, switches, status indicators, and actuators, while the two 16-bit timers support periodic measurement, timing, and event-counting functions. PCB design should preserve a clean return path around the exposed pad and place bypass capacitors close to the supply pins. Firmware should use the device's low-power modes deliberately, and every peripheral should be checked against its clock-gating behavior to ensure that current consumption matches the intended duty cycle. This page combines the manufacturer specifications with practical power-management guidance, interface considerations, and a focused comparison of same-family devices. It is designed to help engineers evaluate the EFM32TG108F16-D-QFN24 for low-power embedded systems without overlooking package, memory, or firmware constraints.

詢價 聯絡我們
EFM32TG108F16-QFN24 - 32MHz 16KB MCU | Silicon Labs
EFM32TG108F16-QFN24

EFM32TG108F16-QFN24 - 32MHz 16KB MCU | Silicon Labs

The Silicon Labs EFM32TG108F16-QFN24 is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating up to 32 MHz, with 16 KB of Flash memory and a 24-QFN (5 x 5 mm) package. Its verified supply-voltage range is 1.85 V to 3.8 V, making it suitable for low-voltage embedded systems, portable instruments, connected sensors, and energy-conscious battery-powered equipment. A microcontroller is a semiconductor device that integrates a processor core, program memory, working memory, and peripherals into one compact package. The EFM32TG108 belongs to the Tiny Gecko family, a low-power 32-bit microcontroller line built around the ARM Cortex-M3 architecture. Its position in the hierarchy is MCU, embedded microcontroller, embedded processor, and semiconductor. The architecture combines a 32 MHz maximum clock with energy-saving modes and short wake-up behavior intended for systems that spend substantial time in low-power states. The EFM32TG108F16-QFN24 provides 16 KB (16K x 8) of Flash for firmware and 32-bit processing through the ARM Cortex-M3 core. Its verified 24-QFN package measures 5 x 5 mm and is suitable for compact, surface-mounted designs. The operating range of 1.85 V to 3.8 V supports 2.5 V and 3.3 V system architectures, although individual external components and board-level voltage tolerances must still be checked. The supplied distributor listing identifies the MCU as an ARM Cortex-M3 Tiny Gecko part rated at 32 MHz. The principal technical benefit is efficient 32-bit processing in a small, low-power package. A 32 MHz clock provides useful computation headroom for protocol handling, control loops, signal acquisition, and system management without requiring a larger processor package. Low-power operation is particularly relevant when average energy per task, rather than peak processing speed, determines battery life. The available evidence does not specify the target device's RAM capacity, GPIO count, timer configuration, analog performance, or exact power-consumption figures, so those parameters should be confirmed in the manufacturer datasheet before final design release. Typical uses include wearable accessories, compact sensor nodes, industrial monitoring modules, energy meters, portable measurement products, and low-power embedded control boards. In each case, the device can act as the central controller, executing application firmware while using sleep states between infrequent events. Designers should size the decoupling network around the device-specific requirements in the EFM32TG108 datasheet and preserve adequate routing clearance for high-speed signals and radio-adjacent circuitry. The principal design consideration is avoiding unverified assumptions about the peripheral complement. Firmware drivers, pin multiplexing, programming interfaces, brownout behavior, and exact memory availability must be checked against the correct datasheet revision for the selected orderable MPN. This page combines the verified distributor specifications, package data, source links, and same-family replacement candidates into a practical sourcing and design reference. This product page additionally distinguishes verified characteristics from missing parameters, summarizes the strongest documented use cases, and identifies same-family QFN-24 alternatives without presenting uncertain cross-family parts as guaranteed drop-in replacements.

詢價 聯絡我們
EFM32TG108F16-QFN24T - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG108F16-QFN24T

EFM32TG108F16-QFN24T - 32MHz ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG108F16-QFN24T is a low-power, 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 16 KB of Flash memory, 4 KB of RAM, and 17 digital I/O pins in a 24-QFN 5 mm × 5 mm package. It combines a 32-bit microcontroller, energy-saving modes, and autonomous peripherals in a compact surface-mount device for embedded and battery-powered systems. An energy-efficient microcontroller is a semiconductor designed to execute control logic while minimizing energy consumption during active and low-power operation. The EFM32 family belongs to the hierarchy of microcontroller, embedded processor, and low-power semiconductor. Its combination of Cortex-M3 processing, fast wake-up behavior, and multiple sleep states supports systems that must respond quickly while conserving energy between external events. Key device features include a maximum CPU frequency of 32 MHz, 16 KB of Flash, 4 KB of RAM, 17 digital I/O pins, and two 16-bit timers. The manufacturer datasheet also identifies autonomous peripherals, high analog integration, and energy-saving modes as central platform characteristics. These resources make the device suitable for compact sensors, portable instruments, industrial controls, and connected accessories that need more capability than an 8-bit controller. The EFM32TG architecture places the ARM Cortex-M3 processor within a highly integrated low-power platform. Flash supports firmware storage, RAM supports working state and stacks, and the timer resources support periodic measurement, timing, and control functions. According to the Silicon Labs EFM32TG data sheet, devices in this family can consume as little as 0.6 µA in Stop mode and approximately 150 µA/MHz in Run mode, providing useful benchmarks when comparing battery life and duty-cycled operation. Typical applications include battery-powered sensor nodes, wearable accessories, industrial condition-monitoring equipment, building controls, and portable measurement products. In these systems, the 17 I/O pins can connect digital sensors or control signals, while the two 16-bit timers can implement timing tasks. The 24-QFN package also reduces board area compared with larger leaded or exposed-outline packages, although its compact dimensions require careful PCB layout and thermal assessment. For PCB design, use the manufacturer's QFN land pattern and route the exposed thermal pad as specified in the datasheet. Keep decoupling capacitors close to the supply pins and provide clean grounding because high-frequency clocking and switching activity can couple into sensitive analog measurements. Verify the exact pin assignment in the package drawing before routing because QFN perimeter pads are closely spaced and exposed-pad connections must follow the recommended land geometry. This product page combines the manufacturer specifications, device-family positioning, application guidance, package considerations, and qualified same-footprint alternatives. It is intended to help engineers evaluate the EFM32TG108F16-QFN24T for low-power embedded designs before completing footprint, firmware, and supply-chain reviews.

詢價 聯絡我們
EFM32TG108F32-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG108F32-D-QFN24

EFM32TG108F32-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG108F32-D-QFN24 is a low-power, 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 kB Flash memory, 4 kB RAM, 17 digital I/O pins, and two 16-bit timers in a 24-QFN 5 x 5 mm package. The device is designed for energy-sensitive embedded systems that require efficient processing, compact implementation, and low-power operating modes. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The EFM32 Tiny Gecko MCU belongs to the hierarchy of embedded processors, microcontrollers, 32-bit ARM Cortex-M devices, and energy-efficient system-on-chip products. It combines real-time control capability with a compact package suitable for battery-operated and space-constrained products. Key specifications include a 32 MHz ARM Cortex-M3 core, 32 kB of Flash program memory, and 4 kB of RAM. The device provides 17 digital I/O pins and two 16-bit timers for sensor sampling, control-loop timing, pulse measurement, and general-purpose embedded tasks. Its specified operating supply range is 1.98 V to 3.8 V, supporting common low-voltage embedded systems. The Tiny Gecko platform emphasizes energy-efficient operation through low-power techniques, fast wake-up behavior, and energy-saving modes. These characteristics allow the processor to remain in a reduced-power state between short processing intervals while still responding quickly to external activity. The 24-QFN package also exposes the device in a compact surface-mount form factor suitable for densely populated control boards. Typical uses include battery-powered sensor nodes, industrial condition-monitoring equipment, compact energy meters, portable medical accessories, and IoT devices. The 17 I/O pins support external sensors and actuators, while the two 16-bit timers provide dedicated timing resources for periodic measurements and motor or control signals. PCB design should preserve clean supply decoupling, thermal copper, and clear access to programming and debug signals. Confirm the complete pin description and exposed-pad connection in the manufacturer pinout table before layout release, and validate the firmware, clock configuration, and low-power wake-up sequence on the final board. This page combines manufacturer specifications, package and memory details, application-oriented engineering guidance, and same-package replacement information to help engineers evaluate the EFM32TG108F32-D-QFN24 for low-power embedded designs.

詢價 聯絡我們
EFM32TG108F32-QFN24 - Tiny Gecko Cortex-M3 MCU, 32KB Flash | Silicon Labs
EFM32TG108F32-QFN24

EFM32TG108F32-QFN24 - Tiny Gecko Cortex-M3 MCU, 32KB Flash | Silicon Labs

The Silicon Labs EFM32TG108F32-QFN24 is an ARM Cortex-M3 based 32-bit microcontroller from the energy-friendly Tiny Gecko family, operating at speeds up to 32 MHz and housed in a 24-pin QFN (5x5 mm) package with exposed pad. The device integrates 32 kB of Flash memory and 4 kB of RAM, with 17 digital I/O pins, two 16-bit timers, and a rich low-energy peripheral set designed for battery-powered and energy-harvesting designs. A microcontroller (MCU) is a single-chip computer that contains a processor core, memory, and programmable input/output peripherals. Within the broader taxonomy of semiconductors, MCUs sit alongside microprocessors (MPUs) and DSPs as the principal embedded computing elements. The EFM32 Tiny Gecko family is positioned as an ultra-low-power Cortex-M3 line, sitting between the entry-level Zero Gecko (Cortex-M0+) and the higher-end Gecko/Giant Gecko (Cortex-M3/M4) families in Silicon Labs' portfolio. Key differentiating features include a Cortex-M3 core with up to 32 MHz operation, hardware AES encryption, a 12-bit ADC, low-energy UART and I2C peripherals capable of operation in deep sleep, and Silicon Labs' patented low-energy sensor interface (LESENSE). The peripheral reflex system (PRS) allows peripherals to communicate directly without CPU intervention, dramatically reducing active time and average current consumption. The 24-QFN package provides a compact footprint with an exposed thermal pad for improved heat dissipation in space-constrained designs. Architecturally, the EFM32TG108F32-QFN24 employs a low-leakage CMOS process with five energy modes (EM0-EM4), enabling current consumption as low as sub-microamp levels in deep sleep while retaining RAM and GPIO state. The integrated LDO and DC-DC converter interface, along with the on-chip brown-out detector and watchdog, simplify BOM and improve system reliability. Typical applications include battery-powered IoT sensor nodes, wearable health and fitness devices, remote keyless entry, energy harvesting systems, smart metering, and any application requiring ARM Cortex-M3 performance with the lowest possible active and sleep current. When designing with this device, ensure the exposed pad is soldered to a sufficient copper pour for thermal performance and that unused pins are configured in their defined reset state to minimize leakage.

詢價 聯絡我們
EFM32TG108F32-QFN24T - 32MHz Tiny Gecko MCU | Silicon Labs
EFM32TG108F32-QFN24T

EFM32TG108F32-QFN24T - 32MHz Tiny Gecko MCU | Silicon Labs

Silicon Labs EFM32TG108F32-QFN24T is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating up to 32 MHz, with 32 KB of Flash, 4 KB of RAM, and 17 digital I/O pins in a 24-QFN 5 mm × 5 mm package. Its 1.85 V to 3.8 V operating range and low-power architecture suit compact, energy-sensitive embedded systems. The device belongs to the microcontroller hierarchy that includes ARM Cortex-M3, embedded MCU, processor IC, and semiconductor. A low-power microcontroller is a processor integrated with memory, I/O, timers, and communication peripherals for control-oriented products. The EFM32TG platform emphasizes short wake-up periods and low consumption in both active and sleep states. According to the Silicon Labs EFM32TG datasheet, the family can consume as little as 0.6 µA in Stop mode and 150 µA/MHz in Run mode, making it useful where battery life, sleep current, and rapid reactivation are important. The EFM32TG108F32-QFN24T combines a 32 MHz Cortex-M3 core with 32 KB Flash and 4 KB RAM. Its integrated feature set includes 17 digital I/O pins and two 16-bit timers. The 24-QFN package measures 5 mm on each side, supporting compact layouts without requiring a large through-hole or high-pin-count package. The operating supply range of 1.85 V to 3.8 V accommodates common low-voltage embedded systems. Its low-power architecture combines normal processing with energy-saving modes and relatively short wake-up times. This makes the MCU suitable for systems that spend substantial time idle but must respond promptly to sensor, communication, or user-interface events. Peripheral integration reduces external component count in designs that require timing, general-purpose I/O, and embedded control functions. The Cortex-M3 architecture also provides a 32-bit processing environment while retaining a compact software model for embedded firmware. Typical applications include battery-powered sensor nodes, compact industrial monitors, wearable accessories, low-energy IoT endpoints, and embedded control modules. The combination of 32 KB Flash and 4 KB RAM is appropriate for firmware featuring protocol handling, state management, and modest local data processing. The 17 available digital I/O pins also support switches, indicators, sensors, and discrete control signals. Designers should calculate both average and peak supply demand, place decoupling capacitors close to the supply and ground pins, and confirm the exposed-pad connection and thermal layout against the manufacturer package drawing. Firmware should use the device's low-energy modes deliberately, because leaving the core active can consume substantially more power than the Stop-mode figure. The 1.85 V to 3.8 V range also requires attention to sensor and radio supply compatibility. This product page combines the manufacturer specifications with package-level guidance, verified replacement candidates, comparison criteria, and practical implementation considerations. It helps engineers narrow a Tiny Gecko selection by core architecture, memory capacity, clock rate, pin count, package, supply voltage, and low-power behavior before completing a firmware and PCB design.

詢價 聯絡我們
EFM32TG108F4-D-QFN24 - 32MHz Cortex-M3 4KB MCU | Silicon Labs
EFM32TG108F4-D-QFN24

EFM32TG108F4-D-QFN24 - 32MHz Cortex-M3 4KB MCU | Silicon Labs

Silicon Labs EFM32TG108F4-D-QFN24 is an ARM Cortex-M3 microcontroller with a maximum clock speed of 32 MHz, 4 KB of Flash memory, 2 KB of RAM, and 17 digital I/O pins, housed in a 24-QFN package measuring 5 mm by 5 mm. It belongs to the EFM32 Tiny Gecko family and is designed for compact, energy-sensitive embedded systems that require efficient processing, low-power operation, and rapid wake-up behavior. An EFM32 microcontroller is a 32-bit embedded processing IC that combines an ARM Cortex-M processor core with flash memory, RAM, general-purpose I/O, timers, communications peripherals, and low-energy management features. Within the product hierarchy, this device is an MCU, embedded controller, semiconductor, and energy-conscious alternative to more general-purpose microcontroller platforms when compact size and low standby consumption are important design priorities. The verified device data identifies an ARM Cortex-M3 core operating up to 32 MHz, 4 KB of programmable Flash organized as 4K by 8, 2 KB of SRAM, and 17 digital I/O pins. It also includes two 16-bit timers. Its small 5 mm by 5 mm QFN-24 land pattern supports dense PCB construction, while the 24-QFN package provides a practical surface-mount option for wearable, sensor, embedded-control, and connected peripheral designs. The Tiny Gecko architecture emphasizes energy-saving operating modes, fast wake-up times, and retention-oriented low-energy techniques. These characteristics are particularly valuable in battery-operated equipment where the controller may spend most of its time asleep and briefly process sensor readings, control outputs, or exchange data. The Cortex-M3 processor provides a substantially more capable instruction set than an 8-bit controller while retaining a compact, cost-conscious embedded footprint. Typical uses include low-power sensor nodes, compact industrial sensing modules, battery-powered accessories, wearable-device subcontrollers, building-control endpoints, and small instrumentation products. In these applications, the 4 KB Flash and 2 KB RAM favor firmware focused on control logic, sampling, local signal conditioning, and communications support rather than large graphical interfaces or extensive local data storage. Designers should verify the complete exposed-pad connection, pin multiplexing, decoupling requirements, programming interface, and operating limits against the manufacturer datasheet before layout release. The verified snippets provide the principal electrical and package information, but they do not expose the complete QFN-24 pin table or all timing and peripheral details, so unsupported values are not inferred in this data set. This page combines verified manufacturer and distributor specifications with package and lifecycle context, a strictly filtered replacement analysis, and engineering-oriented application guidance. It distinguishes confirmed parameters from missing details, making it more useful for preliminary design decisions and procurement than a distributor listing alone.

詢價 聯絡我們
EFM32TG108F4-D-QFN24R - 32MHz Cortex-M3 4KB MCU | Silicon Labs (Tape & Reel)
EFM32TG108F4-D-QFN24R

EFM32TG108F4-D-QFN24R - 32MHz Cortex-M3 4KB MCU | Silicon Labs (Tape & Reel)

Silicon Labs EFM32TG108F4-D-QFN24R is an ARM Cortex-M3 microcontroller with a maximum clock speed of 32 MHz, 4 KB of Flash memory, 2 KB of RAM, and 17 digital I/O pins, housed in a 24-QFN package measuring 5 mm by 5 mm. It belongs to the EFM32 Tiny Gecko family and is designed for compact, energy-sensitive embedded systems that require efficient processing, low-power operation, and rapid wake-up behavior. An EFM32 microcontroller is a 32-bit embedded processing IC that combines an ARM Cortex-M processor core with flash memory, RAM, general-purpose I/O, timers, communications peripherals, and low-energy management features. Within the product hierarchy, this device is an MCU, embedded controller, semiconductor, and energy-conscious alternative to more general-purpose microcontroller platforms when compact size and low standby consumption are important design priorities. The verified device data identifies an ARM Cortex-M3 core operating up to 32 MHz, 4 KB of programmable Flash organized as 4K by 8, 2 KB of SRAM, and 17 digital I/O pins. It also includes two 16-bit timers. Its small 5 mm by 5 mm QFN-24 land pattern supports dense PCB construction, while the 24-QFN package provides a practical surface-mount option for wearable, sensor, embedded-control, and connected peripheral designs. The Tiny Gecko architecture emphasizes energy-saving operating modes, fast wake-up times, and retention-oriented low-energy techniques. These characteristics are particularly valuable in battery-operated equipment where the controller may spend most of its time asleep and briefly process sensor readings, control outputs, or exchange data. The Cortex-M3 processor provides a substantially more capable instruction set than an 8-bit controller while retaining a compact, cost-conscious embedded footprint. Typical uses include low-power sensor nodes, compact industrial sensing modules, battery-powered accessories, wearable-device subcontrollers, building-control endpoints, and small instrumentation products. In these applications, the 4 KB Flash and 2 KB RAM favor firmware focused on control logic, sampling, local signal conditioning, and communications support rather than large graphical interfaces or extensive local data storage. Designers should verify the complete exposed-pad connection, pin multiplexing, decoupling requirements, programming interface, and operating limits against the manufacturer datasheet before layout release. The verified snippets provide the principal electrical and package information, but they do not expose the complete QFN-24 pin table or all timing and peripheral details, so unsupported values are not inferred in this data set. This page combines verified manufacturer and distributor specifications with package and lifecycle context, a strictly filtered replacement analysis, and engineering-oriented application guidance. It distinguishes confirmed parameters from missing details, making it more useful for preliminary design decisions and procurement than a distributor listing alone.

詢價 聯絡我們
EFM32TG108F4-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG108F4-QFN24

EFM32TG108F4-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG108F4-QFN24 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 4 KB of Flash memory, 2 KB of RAM, 17 digital I/O pins, two 16-bit timers, and a 24-QFN 5x5 mm package. It is designed for compact, energy-sensitive embedded systems requiring low-power operation, fast wake-up behavior, and efficient peripheral integration. A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals such as timers, communication interfaces, and I/O ports. The EFM32 Tiny Gecko MCU combines an ARM Cortex-M3 processor with energy-saving modes and low-power techniques. This places it within the embedded MCU hierarchy alongside 8-bit and 32-bit microcontrollers, supporting control, sensing, communications, and small system automation. The device provides 4 KB Flash for firmware storage and 2 KB RAM for working memory. Its 17 digital I/O pins enable external sensors, buttons, indicators, and control signals, while two 16-bit timers support periodic events, timing, and basic control functions. The 32 MHz Cortex-M3 core provides substantially more processing capability than typical low-end 8-bit designs while retaining a compact footprint. The EFM32TG108F4-QFN24 operates from a 1.85 V to 3.8 V supply according to the available product data. Its operating temperature is reported as -40°C to 85°C. The 24-QFN package is suitable for space-constrained PCB layouts and supports surface-mount assembly. The product data does not establish a public detailed pinout for every signal, so pin names and functions are marked as data needed rather than inferred. Typical applications include low-power sensor nodes, compact industrial controllers, embedded monitoring equipment, battery-powered instruments, and embedded communication modules. For designs requiring more memory, peripherals, or package pins, a larger MCU family member may be preferable. Before finalizing a footprint, verify the exact pin assignment, exposed-pad requirements, and decoupling recommendations against the manufacturer datasheet. This product page combines manufacturer specifications, distributor availability, pricing references, cross-reference results, and practical selection guidance to help engineers evaluate the EFM32TG108F4-QFN24 for embedded designs.

詢價 聯絡我們
EFM32TG108F4-QFN24T - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG108F4-QFN24T

EFM32TG108F4-QFN24T - 32MHz ARM Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG108F4-QFN24T is an ARM Cortex-M3 microcontroller IC with a 32 MHz maximum operating frequency, 4 kB of Flash memory, 2 kB of RAM, and 17 digital I/O pins in a 24-QFN 5 x 5 mm package. Designed for energy-sensitive embedded applications, the Tiny Gecko device combines low-power operating techniques, energy-saving modes, and fast wake-up behavior. An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-set processor integrated with memory and peripherals into a single mixed-signal semiconductor. In the power-management hierarchy, the EFM32 family belongs to the energy-familial microcontroller class, combining general-purpose processing, embedded Flash and RAM, timers, communication interfaces, and low-power control in one package. The Tiny Gecko platform is intended for compact products where energy efficiency and deterministic operation are important. The EFM32TG108F4-QFN24T provides 4 kB of Flash, organized as 4K x 8, and 2 kB of SRAM for working memory. Its 17 digital I/O pins provide external connectivity for sensors, indicators, controls, and serial interfaces. Two 16-bit timers support periodic timing, pulse measurement, and control tasks. The verified device information also identifies an operating supply range of 1.85 V to 3.8 V and a maximum clock frequency of 32 MHz. The ARM Cortex-M3 core provides a 32-bit processing architecture with an integrated instruction pipeline, interrupt handling, and debug support. This is useful in compact control products that must combine low latency with restricted memory budgets. Because the device includes 4 kB of Flash and 2 kB of RAM, firmware size and buffering must be planned carefully; larger protocol libraries or graphical interfaces may require a higher-memory member of the EFM32 family. Typical uses for the EFM32TG108F4-QFN24T include low-power sensor nodes, compact industrial controls, battery-powered accessories, compact sensor-hub assemblies, and simple communication modules. Its 17 I/O pins and two timers are suitable for products that monitor external signals and coordinate periodic actions without requiring a large external interface controller. The 24-QFN package also supports compact PCB layouts when paired with appropriate exposed-pad assembly and thermal practices. Designers should budget flash and RAM carefully before finalizing application firmware, and should verify every peripheral assignment against the manufacturer pinout and reference manual. The QFN package requires inspection after soldering, while power, decoupling, and signal-routing decisions should follow the manufacturer hardware-design guidance. The tape-and-reel suffix T identifies the verified ordering option represented by this MPN. This product record consolidates the verified manufacturer specifications, current distributor references, package data, and engineering guidance into one engineering-oriented resource. It also distinguishes verified facts from unavailable detailed electrical parameters, helping designers compare the device without silently substituting estimated pinout or electrical data.

詢價 聯絡我們
EFM32TG108F8-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG108F8-D-QFN24

EFM32TG108F8-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG108F8-D-QFN24 is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating up to 32 MHz, with 8 kB Flash, 2 kB RAM, 17 digital I/O pins, and a 24-QFN (5x5) package. It combines a compact microcontroller architecture with low-power operating modes, fast wake-up behavior, and energy-saving techniques designed for embedded and battery-powered systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, I/O ports, timers, and communication peripherals on one device. The EFM32TG108 belongs to the Tiny Gecko family, a subcategory of 32-bit ARM Cortex-M3 microcontrollers within the broader embedded processor and semiconductor hierarchy. Its low-power platform is intended to reduce energy consumption when the system must operate for long periods with limited available power. The EFM32TG108F8-D-QFN24 combines a 32 MHz ARM Cortex-M3 core with 8 kB of Flash and 2 kB of RAM. Verified manufacturer and distributor information identifies 17 digital I/O pins and two 16-bit timers. Its 24-QFN package measures 5x5 mm, making it suitable for compact PCB layouts where a reduced footprint is important. The device also supports hardware debugging through a two-pin serial-wire debug interface and includes a one-wire Serial Wire Viewer connection. Silicon Labs positions the Tiny Gecko family around energy efficiency without giving up a 32-bit processor or a broad set of integrated peripherals. The part can operate from a 1.98 V to 3.8 V supply, which allows placement in low-voltage embedded systems. Its microcontroller architecture supports conventional low-power modes, short wake-up times, and energy-saving operation for applications that spend substantial time idle. Typical uses for the EFM32TG108F8-D-QFN24 include battery-powered sensors, compact industrial monitoring nodes, wearable accessories, low-power connected devices, energy-harvesting equipment, and embedded control modules. The 32 MHz Cortex-M3 core is suitable for responsive control logic, while the low-power platform is valuable where average power consumption matters more than sustained processing throughput. Designers should confirm the complete peripheral mapping, exposed-pad connection, and decoupling requirements against the manufacturer datasheet before layout release. The QFN thermal pad must be connected according to the recommended land pattern and thermal strategy, while debug access and programming-test points should be considered early in the PCB design. This page consolidates manufacturer specifications, distributor availability information, same-family drop-in candidates, package-level comparison data, and practical design guidance. It adds engineering context beyond a basic parameter list so engineers can assess memory fit, power architecture, pin compatibility, and sourcing trade-offs before selecting a microcontroller.

詢價 聯絡我們
EFM32TG108F8-D-QFN24R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)
EFM32TG108F8-D-QFN24R

EFM32TG108F8-D-QFN24R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)

The Silicon Labs EFM32TG108F8-D-QFN24R is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating up to 32 MHz, with 8 kB Flash, 2 kB RAM, 17 digital I/O pins, and a 24-QFN (5x5) package. It combines a compact microcontroller architecture with low-power operating modes, fast wake-up behavior, and energy-saving techniques designed for embedded and battery-powered systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, I/O ports, timers, and communication peripherals on one device. The EFM32TG108 belongs to the Tiny Gecko family, a subcategory of 32-bit ARM Cortex-M3 microcontrollers within the broader embedded processor and semiconductor hierarchy. Its low-power platform is intended to reduce energy consumption when the system must operate for long periods with limited available power. The EFM32TG108F8-D-QFN24R combines a 32 MHz ARM Cortex-M3 core with 8 kB of Flash and 2 kB of RAM. Verified manufacturer and distributor information identifies 17 digital I/O pins and two 16-bit timers. Its 24-QFN package measures 5x5 mm, making it suitable for compact PCB layouts where a reduced footprint is important. The device also supports hardware debugging through a two-pin serial-wire debug interface and includes a one-wire Serial Wire Viewer connection. Silicon Labs positions the Tiny Gecko family around energy efficiency without giving up a 32-bit processor or a broad set of integrated peripherals. The part can operate from a 1.98 V to 3.8 V supply, which allows placement in low-voltage embedded systems. Its microcontroller architecture supports conventional low-power modes, short wake-up times, and energy-saving operation for applications that spend substantial time idle. Typical uses for the EFM32TG108F8-D-QFN24R include battery-powered sensors, compact industrial monitoring nodes, wearable accessories, low-power connected devices, energy-harvesting equipment, and embedded control modules. The 32 MHz Cortex-M3 core is suitable for responsive control logic, while the low-power platform is valuable where average power consumption matters more than sustained processing throughput. Designers should confirm the complete peripheral mapping, exposed-pad connection, and decoupling requirements against the manufacturer datasheet before layout release. The QFN thermal pad must be connected according to the recommended land pattern and thermal strategy, while debug access and programming-test points should be considered early in the PCB design. This page consolidates manufacturer specifications, distributor availability information, same-family drop-in candidates, package-level comparison data, and practical design guidance. It adds engineering context beyond a basic parameter list so engineers can assess memory fit, power architecture, pin compatibility, and sourcing trade-offs before selecting a microcontroller.

詢價 聯絡我們
EFM32TG108F8-QFN24 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG108F8-QFN24

EFM32TG108F8-QFN24 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG108F8-QFN24 is an ARM Cortex-M3 microcontroller (MCU) operating up to 32 MHz, with 8 kB Flash, 2 kB RAM, 17 digital I/O pins, and two 16-bit timers, housed in a 24-QFN package. The device is built on Silicon Labs' Tiny Gecko low-power platform, emphasizing energy efficiency, fast wake-up, and low-power operating modes for battery-operated and energy-sensitive systems. A microcontroller is a compact embedded-computing device that integrates a processor core, memory, and peripherals into one integrated circuit. The EFM32TG family belongs to the ARM Cortex-M microcontroller class and the broader embedded processor hierarchy. Its low-power platform includes energy-saving modes intended to extend operating time when the system is mostly idle and must wake quickly for intermittent sensing, control, or communications. The EFM32TG108F8-QFN24 provides an ARM Cortex-M3 core, 8 kB of Flash, and 2 kB of RAM. Its 17 digital I/O pins support compact embedded designs that need discrete input and output functions without a larger package. Two 16-bit timers provide timing resources for periodic activities, sensor sampling, timing interfaces, or motor and actuator control. Its 24-QFN package is specified as 5 mm by 5 mm with an exposed pad. The 32 MHz operating speed provides deterministic processing performance for control-oriented applications while retaining a compact, low-power architecture. The combination of Cortex-M3 processing, integrated memories, timers, and digital I/O makes the device suitable for small embedded products where board area, energy use, and rapid wake-up behavior are important design constraints. Typical applications include battery-operated sensors, IoT endpoint nodes, compact industrial controllers, building automation interfaces, low-power instrumentation, and wearable or portable products. In these systems, the MCU can sleep between events, wake for a measurement or control task, and return to a low-power state while the timers and digital I/O support local system behavior. Designers should confirm the exact pin functions, exposed-pad connection, decoupling requirements, and programming setup from the manufacturer datasheet before layout. The QFN thermal pad and exposed-pad layout should follow the package drawing, while firmware should account for the device's low-power states and wake-up sources to achieve the intended battery life.

詢價 聯絡我們