產品(44,000+)

EFM32WG295F256-BGA120 - 48MHz Cortex-M4 256KB Wonder Gecko | Silicon Labs
EFM32WG295F256-BGA120

EFM32WG295F256-BGA120 - 48MHz Cortex-M4 256KB Wonder Gecko | Silicon Labs

Buy EFM32WG295F256-BGA120 Silicon Labs Wonder Gecko MCU, 48 MHz Cortex-M4F, 256 KB Flash, 120-BGA. Ideal for IoT, wearables, metering. Datasheet available.

詢價 聯絡我們
EFM32WG330F64-QFN64 - 48MHz Cortex-M4F MCU | Silicon Labs
EFM32WG330F64-QFN64

EFM32WG330F64-QFN64 - 48MHz Cortex-M4F MCU | Silicon Labs

Silicon Labs EFM32WG330F64-QFN64 is a 32-bit ARM Cortex-M4F Wonder Gecko microcontroller operating up to 48 MHz, with 64 KB of flash memory and a 64-QFN 9 mm × 9 mm package. It accepts a 1.98 V to 3.8 V supply and combines a floating-point unit, DSP instructions, autonomous peripherals, and energy-saving modes for compact embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one device. The EFM32 Wonder Gecko platform belongs to the broader 32-bit embedded-controller hierarchy, combining real-time processing with low-power operation. Its autonomous peripherals can perform selected tasks with limited CPU intervention, helping conserve energy in sensor, communications, and embedded-control products. The EFM32WG330F64-QFN64 operates at up to 48 MHz and includes 64 KB of flash for firmware. Its Cortex-M4F core supports the full ARM DSP instruction set and hardware floating-point arithmetic, useful for filtering, control algorithms, and digital signal processing. The family is designed to consume as little as 0.65 µA in Stop mode and 211 µA/MHz in Run mode, according to the manufacturer datasheet. Integration is a major technical advantage. On-chip analog and autonomous peripherals reduce the need for separate sensors, timers, and interface components, while dedicated hardware can continue selected operations during low-energy periods. The 1.98 V to 3.8 V operating range supports low-voltage embedded systems, although the final rail tolerance must include voltage, temperature, and transient effects. Typical uses include wireless sensor nodes, connected industrial sensors, low-power monitoring equipment, consumer controls, and compact embedded-control platforms. The same 48 MHz Cortex-M4F architecture is also suitable for DSP-oriented routines that require deterministic execution without an external digital signal processor. PCB design should preserve the manufacturer's recommended power, decoupling, clock, and exposed-pad arrangements in the 64-QFN footprint. Confirm the complete pin assignment and exposed thermal pad connection in the manufacturer datasheet before routing analog, oscillator, and high-current supply signals. This page organizes the key operating specifications, qualified same-package alternatives, application guidance, and engineering considerations into one practical selection reference. It also highlights where flash capacity, peripheral sets, lifecycle status, and software migration requirements can affect replacement decisions.

詢價 聯絡我們
EFM32WG332F64-QFP64 - 48MHz Cortex-M4F 64KB MCU | Silicon Labs
EFM32WG332F64-QFP64

EFM32WG332F64-QFP64 - 48MHz Cortex-M4F 64KB MCU | Silicon Labs

The Silicon Labs EFM32WG332F64-QFP64 is a 32-bit ARM Cortex-M4F Wonder Gecko microcontroller operating up to 48 MHz, with 64 KB of flash memory in a 64-QFN 9 x 9 mm package. It operates from a 1.98 V to 3.8 V supply and combines a 64-bit ARM Cortex-M4F core, USB, and hardware AES support in a compact low-power design. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces on one device. The EFM32WG332 belongs to the Wonder Gecko family of 32-bit embedded microcontrollers, combining an ARM Cortex-M4F processor with energy-conscious peripherals for connected, low-power products. Its floating-point and DSP instruction support makes it suitable for control logic that must process mixed integer, signal, and floating-point workloads. The headline configuration combines a 48 MHz Cortex-M4F core, 64 KB flash, USB connectivity, and AES security in a 64-QFN package. The compact 9 x 9 mm package supports space-constrained circuit boards while providing 64 electrical contacts. Its 1.98 V to 3.8 V operating range is appropriate for systems using a regulated 3.3 V rail or compatible lower-voltage supply architectures. The Cortex-M4F architecture provides a 32-bit processing path with single-precision floating-point and DSP instructions. This allows efficient implementation of digital control, sensor processing, communications, and protocol handling without requiring a separate digital signal processor. Hardware AES and USB support further reduce the processing burden associated with secure data transfer and USB-connected equipment. Typical applications include energy-metering and utility equipment, building-automation controllers, industrial sensor nodes, portable medical accessories, connected security products, and compact USB peripherals. The Wonder Gecko platform is particularly relevant when a design needs strong processing performance, low-power operation, and integrated connectivity in a small package. Designers should assign all 64 package pins from the manufacturer pin-description table and preserve the exposed thermal-pad connection recommended for the selected PCB land pattern. Decoupling, clock stability, USB routing, and supply sequencing should follow the device reference circuitry. Firmware development should use the supported Silicon Labs toolchain and verify peripheral assignments against the exact package variant. This page consolidates the confirmed electrical identity, package information, connectivity features, replacement analysis, comparison parameters, and practical integration guidance for engineers evaluating the EFM32WG332F64-QFP64.

詢價 聯絡我們
EFM32WG380F256-QFP100T - 256KB Flash ARM Cortex-M4F MCU | Silicon Labs
EFM32WG380F256-QFP100T

EFM32WG380F256-QFP100T - 256KB Flash ARM Cortex-M4F MCU | Silicon Labs

The Silicon Labs EFM32WG380F256-QFP100T is an ARM Cortex-M4F Wonder Gecko microcontroller (MCU) delivering 48 MHz core speed, 256 kB of Flash, and 32 kB of RAM in a 100-pin LQFP (14x14 mm) package. The "T" suffix designates a Tray packaging option, suitable for low-volume production and prototyping on the same PCB footprint as the tape-and-reel variant. A microcontroller is a single-chip computer containing a CPU core, on-chip memory, and a rich set of digital and analog peripherals. The Cortex-M4F class belongs to ARM's energy-efficient 32-bit processor line, adding a hardware single-precision Floating Point Unit (FPU) and full DSP instruction set on top of the Cortex-M4 core. The EFM32 Wonder Gecko family is positioned as a low-power MCU sub-class under Silicon Labs' EFM32 Gecko portfolio, intended for battery-powered and energy-harvesting products. Key features include an integrated USB 2.0 Full-Speed device controller with on-chip PHY, hardware AES-128/256 cryptographic accelerator, 12-bit ADC, and a peripheral reflex system that lets timers and GPIO events trigger peripherals autonomously without waking the CPU. The MCU offers 93 GPIO, multiple serial interfaces (USART, SPI, I2C, USB), and a low-energy timer/counter suitable for Always-On designs. Energy efficiency is the defining characteristic of the EFM32WG platform. The device consumes as little as 0.65 microamps in Stop mode with retained RAM and runs at 211 A/MHz active, with fast 2 microsecond wake-up from sleep. The autonomous peripherals and energy-saving modes let designers push most of the system into nano-ampere sleep states while keeping wake-up responsiveness intact. Typical applications include industrial sensor nodes, smart metering, building automation, USB-enabled wearables, and portable medical devices where both DSP signal conditioning and ultra-low standby current are required. When designing with this device, pay attention to the 1.8-3.8V supply range and add bulk decoupling on VDD/VDD_USB. Verify the 100-pin LQFP pinout matches your PCB land pattern; tray (T) and tape-reel (R) suffixes share the identical silicon. This page synthesizes distributor pricing, drop-in same-family variants, and AEO-Q3.4 energy-saving design notes not aggregated in the manufacturer datasheet.

詢價 聯絡我們
EFM32WG840F64-QFN64 - 48MHz Cortex-M4F MCU | Silicon Labs
EFM32WG840F64-QFN64

EFM32WG840F64-QFN64 - 48MHz Cortex-M4F MCU | Silicon Labs

The Silicon Labs EFM32WG840F64-QFN64 is a 32-bit ARM Cortex-M4F microcontroller operating up to 48 MHz, with 64 KB of flash memory in a 64-QFN 9 x 9 mm package. The device combines a DSP instruction set, single-precision floating-point hardware, LCD-oriented peripherals, and AES security support in the EFM32 Wonder Gecko family. Its 1.98 V to 3.8 V operating range supports low-voltage embedded systems where compactness, energy efficiency, and integrated security are important. An ARM Cortex-M4F microcontroller is a 32-bit embedded processor that combines a general-purpose instruction set with DSP acceleration and a floating-point unit. The Cortex-M4F belongs to the wider microcontroller hierarchy, alongside ARM Cortex-M0, Cortex-M0+, Cortex-M3, and Cortex-M7 processors. Silicon Labs places the EFM32WG840F64-QFN64 within the EFM32 Wonder Gecko family, using low-energy operating techniques and fast wake-up behavior for battery-powered and energy-conscious products. The device runs at 48 MHz and includes 64 KB of flash memory for firmware and constants. Its Cortex-M4F architecture supports the DSP instruction set and hardware floating-point operations, which improve performance for digital filtering, control algorithms, audio processing, and other mixed integer-and-float workloads. The integrated AES capability supports encrypted data transfer or storage without requiring a separate cryptographic accelerator. The microcontroller is designed around a low-power platform featuring energy-saving modes and rapid wake-up capability. These characteristics are particularly useful in portable instruments, sensor nodes, industrial monitoring equipment, and connected products that spend most of their operating life in a low-energy state. The manufacturer also describes backup-battery operation for maintaining system operation when the main power source drains. Typical uses include low-power sensor nodes, compact industrial controllers, medical monitoring modules, connected security devices, energy meters, and control systems with a small display interface. The LCD connection and AES support make the device especially relevant to portable products that combine a human-readable display with protected data. Its 64-QFN package also supports space-constrained board layouts while exposing a substantial peripheral set through 64 contacts. Designers should verify the exact pin assignments, exposed-pad connection, decoupling requirements, and supported operating-temperature grade against the manufacturer datasheet before layout release. Because the device combines a 48 MHz processor with external memory, display, and radio interfaces, careful decoupling, controlled return paths, and signal-integrity layout are important. The QFN thermal pad should be connected according to the package and board-stackup guidance in the datasheet. This product record combines the key device characteristics with practical application guidance, pinout considerations, and verified drop-in alternatives. It is intended to help engineers assess the Cortex-M4F, 64 KB flash, 48 MHz performance, low-power operation, AES support, and 64-QFN footprint before committing the part to an embedded design.

詢價 聯絡我們
EFM32WG842F64-QFP64 - 48MHz Cortex-M4F 64KB MCU | Silicon Labs
EFM32WG842F64-QFP64

EFM32WG842F64-QFP64 - 48MHz Cortex-M4F 64KB MCU | Silicon Labs

Silicon Labs EFM32WG842F64-QFP64 is a 32-bit ARM Cortex-M4F Wonder Gecko microcontroller with a 48 MHz operating frequency, 64 KB of flash memory, and a 64-TQFP package. The device is designed for low-power embedded systems that require efficient 32-bit processing, integrated cryptographic hardware, and flexible serial connectivity. A microcontroller is a semiconductor integrated circuit containing a processor core, program memory, data memory, peripherals, and I/O in one package. It belongs to the embedded-controller hierarchy: microcontroller → 32-bit MCU → ARM Cortex-M4F MCU → EFM32 Wonder Gecko. Compared with a general-purpose processor, the EFM32WG842F64-QFP64 combines deterministic peripheral control with energy-saving operating modes, making it suitable for connected control products that must operate from limited power budgets. The principal device parameters are a 48 MHz clock, 64 KB of flash program memory, and a 1.98 V to 3.8 V supply range. The Cortex-M4F core includes the full DSP instruction set and floating-point unit, according to the manufacturer documentation, while product listings identify integrated AES and LCD-related capabilities. These features support signal processing, secure communication, and human-interface applications without requiring a separate high-performance processor. Memory and peripheral density make this MCU useful in industrial equipment, building controls, sensor gateways, metering equipment, and compact consumer devices. The 64-TQFP package provides 64 accessible package leads and a 10 mm by 10 mm footprint suitable for surface-mount assembly. Its 32-bit architecture also provides more computational headroom than 8-bit or 16-bit controllers for protocol stacks, data filtering, and control-loop calculations. Power-system design should account for the 1.98 V to 3.8 V operating range and the output requirements of every attached peripheral. Decoupling capacitors should be placed close to the supply pins, while unused inputs should be connected according to the pin-description table in the manufacturer datasheet. Firmware should use the documented clock, reset, and low-power configuration sequences to maintain reliable startup behavior. This product page combines the manufacturer-level device identity with a package-focused engineering comparison, practical design guidance, and clearly identified substitution constraints. It is intended to help engineers determine whether the EFM32WG842F64-QFP64 matches an existing 64-TQFP PCB design before requesting commercial availability and lead-time confirmation.

詢價 聯絡我們
EFM32WG940F64-QFN64 - 48MHz Cortex-M4F MCU | Silicon Labs
EFM32WG940F64-QFN64

EFM32WG940F64-QFN64 - 48MHz Cortex-M4F MCU | Silicon Labs

The Silicon Labs EFM32WG940F64-QFN64 is a 32-bit ARM Cortex-M4F Wonder Gecko microcontroller operating up to 48 MHz, with 64 KB of flash memory and a 64-QFN 9 x 9 mm package. It includes the DSP instruction set and a floating-point unit, while its 1.98 V to 3.8 V operating supply supports low-voltage embedded systems. USB and LCD-oriented capabilities make the device suitable for connected human-interface products. A microcontroller is an integrated circuit that combines a processor core, memory, peripherals, and I/O in one package. The EFM32WG940 belongs to the Wonder Gecko family and the wider EFM32 low-power embedded-product hierarchy. Its Cortex-M4F core executes compact embedded software, while dedicated peripherals reduce the processing burden for communications, timing, data acquisition, display interaction, and general-purpose control. The primary features include a 48 MHz Cortex-M4F core, 64 KB of flash memory organized as 64K x 8, full DSP instructions, and a hardware floating-point unit. The 1.98 V to 3.8 V supply range supports both low-voltage digital systems and designs operating from a regulated 3.3 V rail. Its 64-QFN package provides a compact surface-mount footprint for space-constrained products. The floating-point unit accelerates single-precision arithmetic without software emulation, while the DSP instruction set supports signal-processing workloads. These features are valuable for local filtering, control calculations, sensor conditioning, and user-interface logic. The 48 MHz operating speed provides additional performance margin for protocol handling and coordinated peripheral activity while retaining the low-power design focus associated with the Wonder Gecko family. Typical applications include USB-connected industrial controls, compact LCD human-interface panels, environmental monitoring terminals, building-automation nodes, portable instrumentation, and connected sensor equipment. A system requiring a small display, USB connectivity, and deterministic embedded control can use the MCU to combine user feedback and communications in one processor platform. PCB implementation should account for the 64-QFN 9 x 9 mm footprint, exposed-pad thermal requirements, and the manufacturer pin and land-pattern guidance. Confirm the exact package dimensions, pin assignments, and recommended PCB library geometry in the Silicon Labs EFM32WG940 datasheet before committing a board layout. This product page combines the principal EFM32WG940F64-QFN64 specifications, verified package and supply information, a focused replacement assessment, and practical design guidance. It helps engineers evaluate CPU performance, memory capacity, peripheral requirements, package constraints, and migration risk before integrating the microcontroller into an embedded design.

詢價 聯絡我們
EFM32WG942F64-QFP64 - 48MHz Cortex-M4F MCU | Silicon Labs
EFM32WG942F64-QFP64

EFM32WG942F64-QFP64 - 48MHz Cortex-M4F MCU | Silicon Labs

Silicon Labs EFM32WG942F64-QFP64 is a 32-bit ARM Cortex-M4F Wonder Gecko microcontroller operating at 48 MHz, with 64 KB of flash memory and 32 KB of SRAM, in a 64-pin TQFP package. It combines a high-performance Cortex-M4F processor with low-power operation, flexible peripherals, and integrated connectivity options for compact embedded systems. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, clock circuitry, and peripherals such as GPIO, timers, serial interfaces, and analog blocks. The EFM32 Wonder Gecko family belongs to the broader hierarchy of embedded processors, 32-bit microcontrollers, and mixed-signal semiconductors designed for industrial, consumer, communications, and IoT equipment. The EFM32WG942F64-QFP64 supports operation from a 1.98 V to 3.8 V supply range and combines 48 MHz processing performance with 64 KB of flash. Its 32-bit architecture provides greater addressing capability and computational headroom than many 8-bit or 16-bit control solutions. The 64-pin TQFP package also provides access to a broad selection of GPIO and peripheral functions while supporting conventional surface-mount assembly. Silicon Labs designs the Wonder Gecko family around an ARM Cortex-M4F core with floating-point capability and energy-focused peripherals. Low-power modes are important in battery-operated equipment because they allow the processor and unused peripherals to remain idle without continuously consuming active processing power. The combination of performance, memory, and power management supports responsive control systems without requiring a separate processor for every measurement or communication function. Typical applications include industrial sensor nodes, building automation controllers, portable measurement equipment, connected accessories, low-power IoT devices, and embedded monitoring systems. The device is particularly suitable when local control, serial communications, and compact PCB integration are required within a single microcontroller rather than a combination of processor, memory, and discrete interface components. Circuit design should account for the complete pin configuration, decoupling requirements, clock strategy, boot mode, and programming interface before layout. Because the QFP64 package exposes many signals, maintain short return paths for supply and ground, place bypass capacitors close to their associated supply pins, and follow the manufacturer datasheet for the exact pin assignments and alternate functions. This product record combines the core MCU specifications, package details, verified drop-in alternatives, application guidance, and design considerations needed for initial engineering evaluation. Final firmware behavior, peripheral routing, and production programming should be validated against the current Silicon Labs datasheet and the selected board-level design.

詢價 聯絡我們
EFM32ZG108F16-B-QFN24 - 24MHz Cortex-M0+ MCU | Silicon Labs
EFM32ZG108F16-B-QFN24

EFM32ZG108F16-B-QFN24 - 24MHz Cortex-M0+ MCU | Silicon Labs

The Silicon Labs EFM32ZG108F16-B-QFN24 is a 24 MHz ARM Cortex-M0+ 32-bit microcontroller with 16 kB Flash, 4 kB RAM, and 17 digital I/O pins in a 24-QFN 5 x 5 mm package. It is designed for compact, energy-sensitive embedded systems that require fast wake-up, low-power operation, and integrated peripherals. The device operates from 1.98 V to 3.8 V and provides two 16-bit timers, GPIO, communications interfaces, and analog functions in a single low-power package. A microcontroller is a programmable semiconductor that integrates a processor core, memory, digital I/O, timers, and peripherals on one integrated circuit. In the power-management hierarchy, this ARM Cortex-M0+ MCU belongs to the embedded-controller class and combines general-purpose 32-bit processing with energy-conscious peripherals. The EFM32 Zero Gecko family is particularly suited to battery-operated systems, smart meters, sensors, and industrial devices that spend substantial time in low-power states. Key features include 24 MHz processing performance, 16 kB of embedded Flash, 4 kB of SRAM, 17 GPIO pins, and 2 x 16-bit timers. Silicon Labs emphasizes low-power operation, including Stop-mode consumption as low as 0.5 uA and Run-mode consumption of 114 uA/MHz. The 1.98 V to 3.8 V operating range supports low-voltage systems, while the compact 24-QFN package helps reduce board area in wearable, metering, and embedded-control products. The EFM32ZG108 architecture combines an ARM Cortex-M0+ core with configurable peripheral locations and energy-saving hardware. Its 17 I/O pins can be assigned flexibly through the device configuration mechanism, reducing the need for external multiplexing in compact designs. Two 16-bit timers support periodic events, timing measurements, and motor or waveform control. The manufacturer documentation also identifies autonomous peripheral operation as a family-level feature that can reduce CPU involvement during selected low-energy tasks. Typical applications include smart energy meters, water and gas meters, industrial sensor nodes, portable medical accessories, compact environmental monitors, and low-power IoT devices. In these systems, the MCU can manage sensor acquisition, scheduled measurements, communications, and local status indication while retaining state through multiple energy-saving states. The 24 MHz Cortex-M0+ core provides sufficient performance for protocol handling and modest control tasks without requiring a higher-complexity processor. PCB implementation requires careful attention to the exposed pad, analog and digital supply connections, and high-frequency decoupling. The EFM32ZG family documentation states that AVDD_x, VDD_DREG, and IOVDD_x pins must be connected together at the PCB level, optionally with filtering. Follow the manufacturer pin-description table and hardware-design guidance before assigning tracks, and place decoupling capacitors close to their associated supply pins. This product page combines the manufacturer specifications with engineering-focused application guidance, pin and footprint considerations, drop-in alternatives, and parameter-by-parameter comparison. These details help engineers assess fit before committing the EFM32ZG108F16-B-QFN24 to a low-power embedded design.

詢價 聯絡我們
EFM32ZG108F16-QFN24 - 24MHz ARM Cortex-M0+ MCU | Silicon Labs
EFM32ZG108F16-QFN24

EFM32ZG108F16-QFN24 - 24MHz ARM Cortex-M0+ MCU | Silicon Labs

The Silicon Labs EFM32ZG108F16-QFN24 is an ARM Cortex-M0+ 32-bit microcontroller operating up to 24 MHz, with 16 kB Flash memory, 4 kB RAM, 17 digital I/O pins, and two 16-bit timers in a 24-QFN (5x5 mm) package. It is designed for energy-sensitive embedded systems that require low-power operation, fast wake-up behavior, and integrated peripherals. The device supports a 1.98 V to 3.8 V supply range according to the verified product data. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The EFM32ZG family belongs to the ARM Cortex-M0+ microcontroller hierarchy, where the Cortex-M0+ core provides an efficient 32-bit architecture for embedded control, sensor, and communication products. The Zero Gecko platform emphasizes energy efficiency through low-power modes, fast wake-up times, and autonomous peripheral operation. This makes the EFM32ZG108F16-QFN24 suitable for battery-powered equipment where average energy use is more important than maximum processing throughput. The EFM32ZG108F16-QFN24 combines 16 kB of Flash with 4 kB of RAM and 17 digital I/O pins in a compact 5x5 mm QFN package. Its two 16-bit timers provide dedicated timing resources for periodic sensing, motor control, or signal generation. The integrated hardware is intended to reduce the number of external components in small embedded products while retaining the low-power characteristics associated with the Zero Gecko family. The verified manufacturer datasheet describes the EFM32ZG family as consuming as little as 0.5 microamp in Stop mode and 114 microamps per megahertz in Run mode. These figures show the family-level power behavior: the Stop-mode figure is important for duty-cycled battery systems, while the Run-mode figure helps estimate active processing energy. The device also includes low-energy techniques, fast wake-up times, energy-saving modes, autonomous peripherals, and high analog integration. Typical applications include low-power sensor nodes, compact industrial monitoring devices, battery-operated accessories, portable measurement products, and connected embedded controls. A sensor node can keep the processor stopped for most of its operating cycle, wake on an external event, acquire a measurement, process it, and return to Stop mode. For motor or timing functions, the two 16-bit timers can offload periodic operations and reduce the need for continuous software polling. When designing a board around this MCU, preserve the exposed-pad and QFN land-pattern requirements and decouple the supply pins close to the device. Confirm the exact pin multiplexing, oscillator requirements, and exposed-pad connection against the manufacturer datasheet before layout release. The QFN package is compact, so thermal performance depends on the PCB copper area and the exposed pad rather than on package size alone. This page combines verified manufacturer and distributor information, a practical comparison of same-package alternatives, and engineering guidance for low-power PCB design. It is intended to help engineers identify the correct Zero Gecko variant, plan power budgets, and move from component selection to a manufacturable 24-QFN design.

詢價 聯絡我們
EFM32ZG108F32-B-QFN24 - 24MHz Cortex-M0+ MCU | Silicon Labs
EFM32ZG108F32-B-QFN24

EFM32ZG108F32-B-QFN24 - 24MHz Cortex-M0+ MCU | Silicon Labs

The Silicon Labs EFM32ZG108F32-B-QFN24 is a 32-bit ARM Cortex-M0+ microcontroller operating up to 24 MHz, with 32 kB of Flash memory, 4 kB of RAM, and 17 digital I/O pins in a 24-QFN 5 x 5 mm package. It belongs to the EFM32 Zero Gecko family of energy-focused microcontrollers for battery-powered and energy-conscious systems. An MCU integrates a processor core, memory, clocking, analog interfaces, communications peripherals, and general-purpose I/O into one package. The Zero Gecko platform uses an ARM Cortex-M0+ core within a broader microcontroller hierarchy that also includes the Tiny Gecko, Huge Gecko, and Wireless Gecko families. Silicon Labs positions these devices for applications that require fast wake-up behavior and low energy consumption rather than maximum processing performance. Key device characteristics include a 24 MHz maximum operating frequency, 32 kB Flash organized as 32K x 8, and 4 kB RAM. The device provides 17 digital I/O pins and two 16-bit timers. Its 1.98 V to 3.8 V operating supply range supports both 2.5 V and 3.3 V system designs. The EFM32ZG family is specified to consume as little as 0.5 uA in Stop mode and 114 uA/MHz in Run mode. The Zero Gecko architecture combines autonomous peripherals, integrated analog functions, and energy-saving operating modes. These features allow sensing and control tasks to continue with limited processor intervention, reducing overall energy use in duty-cycled systems. The Cortex-M0+ architecture provides a compact instruction set suited to control logic, communications, and low-power sensing rather than compute-intensive workloads. Typical uses include smart metering, energy and gas measurement, industrial sensing nodes, connected home devices, and compact battery-powered instruments. The 32 kB Flash footprint is appropriate for modest embedded applications, while the 4 kB RAM supports protocol buffering and short-lived working data. Designers should evaluate firmware size carefully when adding networking stacks or complex application libraries. PCB design must connect AVDD_x, VDD_DREG, and IOVDD_x as described in the EFM32ZG108 hardware documentation, and decoupling must follow the recommended application circuit. Silicon Labs application note AN0002, EFM32 Hardware Design Considerations, is the appropriate reference for supply filtering, grounding, and layout. This page consolidates the manufacturer specifications, package details, low-power characteristics, drop-in candidates, and practical PCB guidance needed to evaluate the EFM32ZG108F32-B-QFN24 for a new design.

詢價 聯絡我們
EFM32ZG108F32-QFN24 - 24MHz Cortex-M0+ MCU | Silicon Labs
EFM32ZG108F32-QFN24

EFM32ZG108F32-QFN24 - 24MHz Cortex-M0+ MCU | Silicon Labs

Silicon Labs EFM32ZG108F32-QFN24 is a 32-bit ARM Cortex-M0+ microcontroller operating up to 24 MHz, with 32 KB of Flash memory, 4 KB of RAM, 17 digital I/O pins, and two 16-bit timers in a 24-QFN 5 mm × 5 mm package. It belongs to the EFM32 Zero Gecko family, where the MCU combines a compact general-purpose processor with low-power operating techniques, fast wake-up behavior, and energy-saving modes for energy-sensitive embedded products. A microcontroller is an embedded processing system that integrates a CPU core, nonvolatile program memory, working RAM, peripherals, and I/O on one semiconductor device. The EFM32ZG108F32-QFN24 is a 32-bit ARM Cortex-M0+ MCU, with Cortex-M0+ belonging to the ARM microcontroller processor hierarchy. Within the EFM32 product family, Zero Gecko devices are intended for compact, low-power embedded control, sensor, metering, and connected-product designs where code density, peripheral integration, and energy efficiency are important. The main verified specifications include a 24 MHz maximum CPU speed, 32 KB Flash organized as 32K × 8, 4 KB RAM, 17 digital I/O pins, and two 16-bit timers. The manufacturer describes the platform as including low-energy techniques, fast wake-up times, and energy-saving modes. These characteristics make the device suitable for embedded systems that spend substantial time between active processing intervals while retaining a conventional 32-bit Cortex-M0+ software ecosystem. The Zero Gecko architecture integrates configurable peripheral I/O locations and provides dedicated timing and energy-management resources for event-driven designs. This allows firmware to use interrupts and low-power states instead of continuously polling inputs. The 24 MHz Cortex-M0+ core supplies adequate control bandwidth for sensor acquisition, communication protocol handling, state-machine logic, and local supervisory functions without requiring a higher-performance MCU class. Typical uses include battery-operated sensors, smart-metering equipment, energy, gas, and water monitoring, industrial sensing, portable medical accessories, and compact connected products. In each case, the device can coordinate low-power sampling, local control, and communications while limiting the energy consumed between events. The 24-QFN 5 mm × 5 mm package also supports space-constrained board layouts when careful exposed-pad thermal design is used. The main design consideration is low-power behavior. Firmware, peripheral routing, wake-up sources, and the sleep state should be selected together rather than treating low current as an isolated datasheet value. Board-level leakage, sensor standby current, and wake-up latency can materially change the system duty cycle, so the complete power budget should be evaluated under realistic operating conditions. This product data consolidates verified manufacturer and distributor specifications, documents unavailable electrical and pin-level details without guessing, and separates known drop-in alternatives from package-only lookalikes. That distinction helps engineers compare genuine device options while avoiding false substitution claims based only on a shared 24-QFN footprint.

詢價 聯絡我們
EFM32ZG108F4-B-QFN24 - 24MHz ARM Cortex-M0+ MCU | Silicon Labs
EFM32ZG108F4-B-QFN24

EFM32ZG108F4-B-QFN24 - 24MHz ARM Cortex-M0+ MCU | Silicon Labs

Silicon Labs EFM32ZG108F4-B-QFN24 is an ARM Cortex-M0+ 32-bit microcontroller rated up to 24 MHz, with 4 kB Flash, 2 kB RAM, and 17 digital I/O pins in a 24-QFN 5 x 5 mm surface-mount package. Its operating supply range is 1.98 V to 3.8 V. The Zero Gecko family combines a 32-bit processor with energy-saving modes, fast wake-up behavior, and autonomous peripheral operation for compact embedded designs. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals such as timers, serial interfaces, analog blocks, and GPIO into one package. The EFM32ZG hierarchy belongs to the ARM Cortex-M0+ class of 32-bit microcontrollers, where low power consumption, compact implementation, and deterministic peripheral operation are central design requirements. Key specifications include a 24 MHz maximum CPU frequency, 4 kB Flash organized as 4K x 8, 2 kB SRAM, 17 digital I/O pins, and two 16-bit timers. The device can consume as little as 0.5 microamp in Stop mode, while the EFM32ZG family datasheet specifies 114 microamp per MHz in Run mode. Autonomous peripherals allow selected activity to continue while the CPU sleeps, helping reduce overall energy use. The architecture uses the ARM Cortex-M0+ instruction set and includes serial communications, timing, and analog peripherals suitable for embedded control. The 24 MHz operating point provides useful processing margin for protocol handling, state-machine control, and sensor acquisition without moving to a larger microcontroller package. Exact interrupt, analog, and communication feature details should be confirmed in the EFM32ZG family datasheet for the selected board configuration. Typical applications include battery-operated smart metering, compact industrial sensing nodes, energy and gas measurement equipment, water-monitoring systems, wearable accessories, and low-power connected controls. The small 5 x 5 mm QFN package is particularly useful when board area, sleep current, and fast recovery from low-power states are primary constraints. Designers should confirm the exposed-pad connection, decoupling requirements, supported debug and programming interface, and peripheral availability against the manufacturer datasheet before layout release. Software compatibility also depends on the Silicon Labs SDK, startup files, and device-specific configuration used by the selected development platform. This product record combines verified manufacturer and distributor specifications with practical application guidance, package information, sourcing details, and a conservative drop-in comparison that avoids unverified substitutes.

詢價 聯絡我們
EFM32ZG108F4-B-QFN24R - 24MHz ARM Cortex-M0+ MCU | Silicon Labs (Tape & Reel)
EFM32ZG108F4-B-QFN24R

EFM32ZG108F4-B-QFN24R - 24MHz ARM Cortex-M0+ MCU | Silicon Labs (Tape & Reel)

Silicon Labs EFM32ZG108F4-B-QFN24R is an ARM Cortex-M0+ 32-bit microcontroller rated up to 24 MHz, with 4 kB Flash, 2 kB RAM, and 17 digital I/O pins in a 24-QFN 5 x 5 mm surface-mount package. Its operating supply range is 1.98 V to 3.8 V. The Zero Gecko family combines a 32-bit processor with energy-saving modes, fast wake-up behavior, and autonomous peripheral operation for compact embedded designs. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals such as timers, serial interfaces, analog blocks, and GPIO into one package. The EFM32ZG hierarchy belongs to the ARM Cortex-M0+ class of 32-bit microcontrollers, where low power consumption, compact implementation, and deterministic peripheral operation are central design requirements. Key specifications include a 24 MHz maximum CPU frequency, 4 kB Flash organized as 4K x 8, 2 kB SRAM, 17 digital I/O pins, and two 16-bit timers. The device can consume as little as 0.5 microamp in Stop mode, while the EFM32ZG family datasheet specifies 114 microamp per MHz in Run mode. Autonomous peripherals allow selected activity to continue while the CPU sleeps, helping reduce overall energy use. The architecture uses the ARM Cortex-M0+ instruction set and includes serial communications, timing, and analog peripherals suitable for embedded control. The 24 MHz operating point provides useful processing margin for protocol handling, state-machine control, and sensor acquisition without moving to a larger microcontroller package. Exact interrupt, analog, and communication feature details should be confirmed in the EFM32ZG family datasheet for the selected board configuration. Typical applications include battery-operated smart metering, compact industrial sensing nodes, energy and gas measurement equipment, water-monitoring systems, wearable accessories, and low-power connected controls. The small 5 x 5 mm QFN package is particularly useful when board area, sleep current, and fast recovery from low-power states are primary constraints. Designers should confirm the exposed-pad connection, decoupling requirements, supported debug and programming interface, and peripheral availability against the manufacturer datasheet before layout release. Software compatibility also depends on the Silicon Labs SDK, startup files, and device-specific configuration used by the selected development platform. This product record combines verified manufacturer and distributor specifications with practical application guidance, package information, sourcing details, and a conservative drop-in comparison that avoids unverified substitutes.

詢價 聯絡我們
EFM32ZG108F4-QFN24 - 24MHz 4KB MCU | Silicon Labs
EFM32ZG108F4-QFN24

EFM32ZG108F4-QFN24 - 24MHz 4KB MCU | Silicon Labs

The Silicon Labs EFM32ZG108F4-QFN24 is an ARM Cortex-M0+ 32-bit microcontroller rated up to 24 MHz, with 4 kB of Flash memory, 2 kB of RAM, 17 digital I/O pins, and two 16-bit timers, housed in a 24-QFN package measuring 5 mm by 5 mm. Its supply-voltage range is 1.98 V to 3.8 V, making it suitable for low-voltage embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one compact device. The EFM32ZG108F4-QFN24 belongs to the Zero Gecko family of 32-bit microcontrollers and uses the ARM Cortex-M0+ architecture. This places it within the hierarchy of embedded microcontroller, embedded processor, and semiconductor, while differentiating it for compact, energy-sensitive products. The device combines 4 kB Flash, 2 kB RAM, and 17 digital I/O pins with two 16-bit timers. Its operating speed reaches 24 MHz, providing useful processing capacity for control logic, data acquisition, communication, and user-interface tasks. Silicon Labs also identifies the platform as incorporating low-energy techniques, fast wake-up behavior, and energy-saving modes for duty-cycled and battery-operated equipment. The Zero Gecko platform combines the 32-bit ARM Cortex-M0+ core with integrated memory and mixed-signal peripherals. Because the available verified specification covers only 17 digital I/O pins, no external-bus interface, and 4 kB Flash, firmware complexity must be considered carefully. Code size, stack requirements, and peripheral-driver footprint should be checked before the MCU is committed to a larger control application. Typical uses include compact sensor nodes, low-power condition-monitoring units, small industrial controls, portable accessories, and embedded subsystems that need deterministic peripheral handling. The 24-QFN package also allows a small PCB footprint, while the exposed pad supports heat dissipation when the device operates at sustained activity levels. The exact exposed-pad connection must follow the manufacturer pinout and layout guidance. For a new design, preserve the verified 1.98 V to 3.8 V supply range, validate the timing of all I/O signals, and confirm that the available firmware fits within 4 kB of Flash while leaving adequate 2 kB RAM for the stack and working data. Firmware updates and debugging must fit the device's limited memory budget, so production images should be measured rather than estimated. This product page consolidates verified manufacturer and distributor specifications, package details, sourcing references, and engineering-oriented design guidance. It also clearly distinguishes the target from the available drop-in alternative and identifies where additional electrical, pinout, pricing, or lifecycle information requires verification.

詢價 聯絡我們
EFM32ZG108F8-B-QFN24 - 24MHz Cortex-M0+ MCU | Silicon Labs
EFM32ZG108F8-B-QFN24

EFM32ZG108F8-B-QFN24 - 24MHz Cortex-M0+ MCU | Silicon Labs

The Silicon Labs EFM32ZG108F8-B-QFN24 is a 24 MHz ARM Cortex-M0+ microcontroller with 8 KB Flash, 2 KB RAM, 17 digital I/O pins, and a 24-QFN 5 x 5 mm package. Its operating supply range is 1.98 V to 3.8 V, making it suitable for compact, energy-sensitive embedded systems. The device belongs to the EFM32 Zero Gecko family and combines a low-power MCU platform with fast wake-up behavior, energy-saving modes, autonomous peripherals, and integrated analog capabilities. A microcontroller is a programmable semiconductor that integrates a processor core, memory, digital I/O, and peripherals into one device. The EFM32ZG is an ARM Cortex-M0+ MCU, a low-complexity 32-bit processor class commonly used for embedded control. Within the product hierarchy, it is a microcontroller, then an embedded processor, then a semiconductor and power-management platform. Its low-power architecture targets applications in which average energy use matters as much as processing performance. Three headline capabilities distinguish the EFM32ZG108F8-B-QFN24: a maximum operating frequency of 24 MHz, 8 KB of Flash memory, and as little as 0.5 uA in Stop mode. The family also supports two 16-bit timers and AES-equipped variants, while the verified device listing identifies 2 KB of RAM and 17 digital I/O pins. These resources support compact control logic, sensor acquisition, communication peripherals, and low-duty-cycle battery-powered products. The EFM32ZG platform emphasizes efficient operation rather than benchmark throughput. Run-mode consumption is stated as 114 uA/MHz, while Stop mode can reach 0.5 uA. Autonomous peripheral operation allows selected hardware functions to continue working with reduced processor involvement, helping control overall energy use. The 24 MHz Cortex-M0+ core provides sufficient performance for protocol handling, control loops, and firmware that does not require a higher-performance Cortex-M3, M4, or M7 core. Typical uses include battery-powered sensors, smart energy meters, industrial monitoring nodes, compact consumer accessories, and connected embedded products. The 24-QFN package also makes the device suitable for space-constrained designs where a small PCB footprint is valuable. System designers should account for the limited 8 KB Flash and 2 KB RAM when organizing firmware and data storage. PCB implementation requires careful handling of the separate AVDD_x, VDD_DREG, and IOVDD_x power domains identified in the manufacturer documentation. These supply-related pins must be connected together at the PCB level, with filtering applied where appropriate. Designers should follow Silicon Labs application note AN0002, "EFM32 Hardware Design Considerations," for recommended decoupling, layout, and schematic practices. This product page consolidates verified manufacturer specifications, distributor availability references, same-family drop-in candidates, and practical design guidance. It also distinguishes confirmed values from parameters that require datasheet review, helping engineers evaluate the EFM32ZG108F8-B-QFN24 without mistaking incomplete search data for a complete component specification.

詢價 聯絡我們
EFM32ZG108F8-B-QFN24R - 24MHz Cortex-M0+ MCU | Silicon Labs (Tape & Reel)
EFM32ZG108F8-B-QFN24R

EFM32ZG108F8-B-QFN24R - 24MHz Cortex-M0+ MCU | Silicon Labs (Tape & Reel)

The Silicon Labs EFM32ZG108F8-B-QFN24R is a 24 MHz ARM Cortex-M0+ microcontroller with 8 KB Flash, 2 KB RAM, 17 digital I/O pins, and a 24-QFN 5 x 5 mm package. Its operating supply range is 1.98 V to 3.8 V, making it suitable for compact, energy-sensitive embedded systems. The device belongs to the EFM32 Zero Gecko family and combines a low-power MCU platform with fast wake-up behavior, energy-saving modes, autonomous peripherals, and integrated analog capabilities. A microcontroller is a programmable semiconductor that integrates a processor core, memory, digital I/O, and peripherals into one device. The EFM32ZG is an ARM Cortex-M0+ MCU, a low-complexity 32-bit processor class commonly used for embedded control. Within the product hierarchy, it is a microcontroller, then an embedded processor, then a semiconductor and power-management platform. Its low-power architecture targets applications in which average energy use matters as much as processing performance. Three headline capabilities distinguish the EFM32ZG108F8-B-QFN24R: a maximum operating frequency of 24 MHz, 8 KB of Flash memory, and as little as 0.5 uA in Stop mode. The family also supports two 16-bit timers and AES-equipped variants, while the verified device listing identifies 2 KB of RAM and 17 digital I/O pins. These resources support compact control logic, sensor acquisition, communication peripherals, and low-duty-cycle battery-powered products. The EFM32ZG platform emphasizes efficient operation rather than benchmark throughput. Run-mode consumption is stated as 114 uA/MHz, while Stop mode can reach 0.5 uA. Autonomous peripheral operation allows selected hardware functions to continue working with reduced processor involvement, helping control overall energy use. The 24 MHz Cortex-M0+ core provides sufficient performance for protocol handling, control loops, and firmware that does not require a higher-performance Cortex-M3, M4, or M7 core. Typical uses include battery-powered sensors, smart energy meters, industrial monitoring nodes, compact consumer accessories, and connected embedded products. The 24-QFN package also makes the device suitable for space-constrained designs where a small PCB footprint is valuable. System designers should account for the limited 8 KB Flash and 2 KB RAM when organizing firmware and data storage. PCB implementation requires careful handling of the separate AVDD_x, VDD_DREG, and IOVDD_x power domains identified in the manufacturer documentation. These supply-related pins must be connected together at the PCB level, with filtering applied where appropriate. Designers should follow Silicon Labs application note AN0002, "EFM32 Hardware Design Considerations," for recommended decoupling, layout, and schematic practices. This product page consolidates verified manufacturer specifications, distributor availability references, same-family drop-in candidates, and practical design guidance. It also distinguishes confirmed values from parameters that require datasheet review, helping engineers evaluate the EFM32ZG108F8-B-QFN24R without mistaking incomplete search data for a complete component specification.

詢價 聯絡我們
EFM32ZG108F8-QFN24 - 24MHz ARM Cortex-M0+ MCU | Silicon Labs
EFM32ZG108F8-QFN24

EFM32ZG108F8-QFN24 - 24MHz ARM Cortex-M0+ MCU | Silicon Labs

The Silicon Labs EFM32ZG108F8-QFN24 is a 24 MHz ARM Cortex-M0+ 32-bit microcontroller with 8 KB Flash, 2 KB RAM, 17 digital I/O pins, and a 24-QFN 5 mm × 5 mm package. It belongs to the Zero Gecko family and combines a low-power architecture with integrated analog, digital, and communication peripherals for energy-sensitive embedded systems. The Zero Gecko MCU family is designed around low-energy operation and rapid wake-up behavior. According to the supplied manufacturer data, the EFM32ZG family can consume as little as 0.5 μA in Stop mode and 114 μA/MHz in Run mode. These characteristics make the device suitable for battery-powered systems, portable instrumentation, connected sensors, and other embedded products where average power consumption affects maintenance intervals and operating life. The EFM32ZG108F8-QFN24 operates at up to 24 MHz and includes 8 KB of program Flash and 2 KB of SRAM. The manufacturer product listing specifies 17 digital I/O pins and two 16-bit timers. Its integrated feature set also includes AES-related hardware support, low-energy peripherals, fast wake-up behavior, and autonomous peripheral operation, allowing the MCU to offload routine measurement, timing, and communication tasks while the Cortex-M0+ core remains available for application logic. The device uses a compact 24-QFN package measuring 5 mm × 5 mm, making it suitable for space-constrained PCB layouts. Its operating and electrical details, including supply voltage, pin assignments, temperature limits, and peripheral mappings, should be confirmed against the official EFM32ZG datasheet and the manufacturer product page. The supplied distributor listings identify the part as an ARM Cortex-M0+ Zero Gecko MCU with 8 KB Flash and a 24-QFN package. Typical applications include wireless sensor nodes, smart energy meters, environmental monitoring, industrial control, portable medical or diagnostic equipment, and consumer battery-powered devices. Its low-power modes and integrated peripherals can reduce the need for external support components and simplify firmware-driven duty-cycling. Designers should select the appropriate power-management strategy, external clock configuration, decoupling network, and programming interface according to the complete datasheet and reference design guidance. For PCB implementation, use the exposed-pad thermal and electrical recommendations from the manufacturer, keep sensitive signal routing short, and provide the required bypass capacitors close to the supply pins. The EFM32ZG108F8-QFN24 is best suited to designs that need a compact ARM Cortex-M0+ MCU with integrated low-power features and only 8 KB of Flash, so firmware size and upgrade requirements should be evaluated before design release. This page consolidates manufacturer specifications, distributor availability information, package details, application guidance, and engineering considerations for engineers comparing the EFM32ZG108F8-QFN24 with other compact low-power microcontrollers.

詢價 聯絡我們
EFM32ZG110F16-B-QFN24 - 24MHz Cortex-M0+ MCU | Silicon Labs
EFM32ZG110F16-B-QFN24

EFM32ZG110F16-B-QFN24 - 24MHz Cortex-M0+ MCU | Silicon Labs

The Silicon Labs EFM32ZG110F16-B-QFN24 is a 32-bit ARM Cortex-M0+ Zero Gecko microcontroller operating up to 24 MHz, with 16 KB of Flash memory, 4 KB of RAM, and 17 digital I/O pins in a 24-QFN 5 x 5 mm package. The device is designed for compact, energy-sensitive embedded systems requiring a balance of processing performance, low-power operation, and integrated peripherals. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals such as timers, serial interfaces, and analog functions on one package. The EFM32 Zero Gecko family belongs to the hierarchy of embedded MCU, 32-bit microcontroller, ARM Cortex-M microcontroller, and energy-efficient semiconductor. Its low-power platform is particularly useful for battery-powered equipment that spends much of its operating time in an energy-saving state. Key features include an ARM Cortex-M0+ core operating at up to 24 MHz, 16 KB of Flash, 4 KB of RAM, 17 digital I/O pins, and two 16-bit timers. The manufacturer describes the family as offering low-power consumption, fast wake-up from energy-saving modes, and energy-saving operating modes. The 24-QFN package also provides a compact surface-mount footprint for compact industrial, sensing, and connected embedded products. The target B-qualified ordering code is associated with the same EFM32ZG110F16 device family represented by EFM32ZG110F16-QFN24 on the manufacturer product page. Silicon Labs describes this MCU as suitable for energy-sensitive applications, while the target listing identifies 24 MHz operation, 16 KB Flash, and a 24-QFN 5 x 5 mm package. Detailed peripheral assignments and absolute electrical limits should be confirmed against the appropriate package and ordering-code table in the manufacturer datasheet. Typical uses include smart metering, gas and water monitoring, compact sensor nodes, low-power industrial controls, and connected embedded products. The 16 KB Flash and 4 KB RAM support small control tasks without requiring a larger MCU, while two 16-bit timers help with periodic sampling and timing functions. Fast wake-up behavior can reduce the effective response delay after a low-power interval. PCB design should preserve the exposed-pad thermal and electrical requirements of the QFN package, place decoupling close to the supply pins, and route sensitive analog or communications signals away from switching nodes. Firmware developers should confirm pin multiplexing, peripheral availability, debug access, and power-management behavior against the datasheet pinout and device-specific configuration tables. This page combines manufacturer specifications, practical design guidance, application fit, and verified drop-in comparison criteria to support component selection and PCB planning. It also distinguishes electrical alternatives from ordering-code variants so engineers can identify changes in memory capacity, processor core, package, or programming requirements before committing a design to production.

詢價 聯絡我們
EFM32ZG110F32-B-QFN24 - 24MHz 32KB Low-Power MCU | Silicon Labs
EFM32ZG110F32-B-QFN24

EFM32ZG110F32-B-QFN24 - 24MHz 32KB Low-Power MCU | Silicon Labs

The Silicon Labs EFM32ZG110F32-B-QFN24 is a 32-bit ARM Cortex-M0+ Zero Gecko microcontroller rated up to 24 MHz, with 32 KB Flash memory, 4 KB RAM, and 17 digital I/O pins in a 24-QFN 5 x 5 mm package. The device operates from 1.98 V to 3.8 V and combines an energy-efficient MCU platform with fast wake-up behavior and multiple low-power operating modes. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. The EFM32 Zero Gecko family belongs to the hierarchy of 32-bit MCU, embedded processor, and energy-conscious embedded controller. Its role is to execute application firmware while measuring, communicating, or controlling other circuit functions. Silicon Labs positions the EFM32ZG family for battery-operated equipment and other systems that require low active and sleep-mode power consumption. The EFM32ZG110F32-B-QFN24 provides a 24 MHz ARM Cortex-M0+ core, 32 KB Flash, and 4 KB RAM. Its 17 digital I/O pins support compact embedded designs, while the listed 2 x 16-bit timers provide dedicated timing resources. The operating supply range of 1.98 V to 3.8 V is suitable for low-voltage portable and energy-harvesting systems. The manufacturer also identifies the family as supporting output-state retention and wake-up from Shutoff Mode. Silicon Labs highlights autonomous peripherals, high analog integration, and energy-saving capabilities as platform features. These characteristics can reduce CPU activity when peripherals handle routine measurement, timing, or communication tasks. The device is based on the 32-bit ARM Cortex-M0+ architecture and is suitable for firmware that requires modest processing performance, deterministic control, and careful attention to average current consumption. Programming and peripheral configuration are handled through the EFM32 development environment and the associated device programming workflow. Typical uses include smart energy and gas or water metering, compact sensor nodes, portable industrial instruments, and battery-operated IoT equipment. The Zero Gecko platform is particularly appropriate when the design must wake frequently, preserve a limited amount of state, and operate from a constrained energy source. Its small 5 x 5 mm QFN package also supports compact PCB layouts where a larger package would be unnecessary. PCB design should preserve the device's required power and decoupling structure and should follow the land pattern and exposed-pad requirements in the manufacturer package documentation. Designers should also review the device's pin multiplexing, clock configuration, and low-power mode entry conditions in the manufacturer datasheet. Validate wake-up behavior, peripheral operation, and firmware timing across the full intended voltage and temperature range. This product page combines manufacturer specifications, lifecycle-oriented sourcing information, engineering design guidance, and clearly qualified drop-in assessment. Its main engineering value is distinguishing a true pin-compatible replacement from variants that differ only in reel packaging, qualification marking, or memory configuration, helping designers avoid PCB and firmware migration surprises.

詢價 聯絡我們
EFM32ZG110F4-B-QFN24 - 24MHz Cortex-M0+ MCU | Silicon Labs
EFM32ZG110F4-B-QFN24

EFM32ZG110F4-B-QFN24 - 24MHz Cortex-M0+ MCU | Silicon Labs

The Silicon Labs EFM32ZG110F4-B-QFN24 is a 32-bit ARM Cortex-M0+ Zero Gecko microcontroller with a 24 MHz maximum operating frequency, 4 KB of Flash memory, 2 KB of RAM, 17 digital I/O pins, and two 16-bit timers, housed in a 24-QFN (5 x 5 mm) package. It is designed for energy-sensitive embedded applications that require low active current, low-power modes, fast wake-up behavior, and a compact surface-mount footprint. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into a single device. The EFM32ZG110F4-B-QFN24 belongs to the Zero Gecko family of 32-bit ARM Cortex-M0+ microcontrollers, a low-power platform within the broader embedded processor and power-management IC hierarchy. Its 4 KB Flash and 2 KB RAM are intended for compact control tasks rather than resource-intensive applications such as graphics processing or large protocol stacks. Key features include a 24 MHz ARM Cortex-M0+ core, 4 KB Flash, 2 KB RAM, 17 digital I/O pins, and two 16-bit timers. The manufacturer datasheet also describes consumption as low as 0.5 microamp in Stop mode and 114 microamps per MHz in Run mode. These figures make the device suitable for battery-operated and duty-cycled systems where average energy use is more important than peak processing throughput. The Zero Gecko platform uses low-energy techniques, energy-saving operating modes, and fast wake-up behavior. The device is suited to applications that periodically measure an input, process a small amount of data, and return to a low-power state. The 24-QFN package provides a compact 5 x 5 mm surface-mount footprint, but its exposed thermal and electrical requirements should be reviewed against the manufacturer package drawing and layout guidance before PCB release. Typical applications include smart meters, gas and water meters, energy measurement, sensor nodes, industrial monitoring, portable sensing, and low-power consumer devices. In each case, the MCU can execute control logic while its low-power modes reduce consumption during idle intervals. The available 4 KB Flash should be checked carefully against firmware size, bootloader requirements, and application update needs. Designers should verify the operating supply range, pin multiplexing, package thermal performance, and peripheral assignments in the manufacturer datasheet. Because this device is a low-memory MCU, firmware architecture matters: interrupt handling, library use, and calibration data can materially affect the available code and RAM budget. This page combines verified manufacturer specifications, distributor references, package details, and practical low-power design guidance. It also distinguishes same-package alternatives from parts that require different memory capacity or package options, helping engineers evaluate replacement decisions without assuming that every 24-QFN Zero Gecko device is electrically and functionally interchangeable.

詢價 聯絡我們
EFM32ZG110F4-B-QFN24R - 24MHz Cortex-M0+ MCU | Silicon Labs (Tape & Reel)
EFM32ZG110F4-B-QFN24R

EFM32ZG110F4-B-QFN24R - 24MHz Cortex-M0+ MCU | Silicon Labs (Tape & Reel)

The Silicon Labs EFM32ZG110F4-B-QFN24R is a 32-bit ARM Cortex-M0+ Zero Gecko microcontroller with a 24 MHz maximum operating frequency, 4 KB of Flash memory, 2 KB of RAM, 17 digital I/O pins, and two 16-bit timers, housed in a 24-QFN (5 x 5 mm) package. It is designed for energy-sensitive embedded applications that require low active current, low-power modes, fast wake-up behavior, and a compact surface-mount footprint. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into a single device. The EFM32ZG110F4-B-QFN24R belongs to the Zero Gecko family of 32-bit ARM Cortex-M0+ microcontrollers, a low-power platform within the broader embedded processor and power-management IC hierarchy. Its 4 KB Flash and 2 KB RAM are intended for compact control tasks rather than resource-intensive applications such as graphics processing or large protocol stacks. Key features include a 24 MHz ARM Cortex-M0+ core, 4 KB Flash, 2 KB RAM, 17 digital I/O pins, and two 16-bit timers. The manufacturer datasheet also describes consumption as low as 0.5 microamp in Stop mode and 114 microamps per MHz in Run mode. These figures make the device suitable for battery-operated and duty-cycled systems where average energy use is more important than peak processing throughput. The Zero Gecko platform uses low-energy techniques, energy-saving operating modes, and fast wake-up behavior. The device is suited to applications that periodically measure an input, process a small amount of data, and return to a low-power state. The 24-QFN package provides a compact 5 x 5 mm surface-mount footprint, but its exposed thermal and electrical requirements should be reviewed against the manufacturer package drawing and layout guidance before PCB release. Typical applications include smart meters, gas and water meters, energy measurement, sensor nodes, industrial monitoring, portable sensing, and low-power consumer devices. In each case, the MCU can execute control logic while its low-power modes reduce consumption during idle intervals. The available 4 KB Flash should be checked carefully against firmware size, bootloader requirements, and application update needs. Designers should verify the operating supply range, pin multiplexing, package thermal performance, and peripheral assignments in the manufacturer datasheet. Because this device is a low-memory MCU, firmware architecture matters: interrupt handling, library use, and calibration data can materially affect the available code and RAM budget. This page combines verified manufacturer specifications, distributor references, package details, and practical low-power design guidance. It also distinguishes same-package alternatives from parts that require different memory capacity or package options, helping engineers evaluate replacement decisions without assuming that every 24-QFN Zero Gecko device is electrically and functionally interchangeable.

詢價 聯絡我們
EFM32ZG110F4-QFN24 - 24MHz Cortex-M0+ 4KB MCU | Silicon Labs
EFM32ZG110F4-QFN24

EFM32ZG110F4-QFN24 - 24MHz Cortex-M0+ 4KB MCU | Silicon Labs

The Silicon Labs EFM32ZG110F4-QFN24 is an ARM Cortex-M0+ 32-bit microcontroller with a 24 MHz maximum operating frequency, 4 KB of Flash memory, 2 KB of RAM, and 17 digital I/O pins. It is supplied in a 24-QFN surface-mount package measuring 5 mm by 5 mm. The device also includes an ADC, AES hardware acceleration, and two 16-bit timers. A microcontroller is a programmable system-on-chip that combines a processor core, program memory, data memory, and peripherals such as timers, analog converters, and communication interfaces. The ARM Cortex-M0+ core provides a compact, energy-efficient architecture for embedded control, while the EFM32 Zero Gecko platform adds low-energy operating techniques, fast wake-up behavior, and energy-saving modes intended for battery-powered and duty-cycled products. Key features of the EFM32ZG110F4-QFN24 include a 24 MHz Cortex-M0+ core, 4 KB of Flash, 2 KB of SRAM, and 17 digital I/O pins in a compact 24-QFN package. Its two 16-bit timers support periodic event generation, input capture, and basic output comparison, while the ADC allows analog sensor signals to be sampled without a separate converter. The listed AES hardware feature supports cryptographic workloads, although system-level security still depends on firmware, key handling, and peripheral configuration. The 4 KB Flash and 2 KB RAM budget places this MCU in the entry-level Zero Gecko category. It is best suited to compact control nodes, simple sensing systems, and products that require deterministic peripheral handling but modest application code and data storage. Firmware size and stack requirements must be checked early, because only 2 KB of RAM leaves limited room for buffers, display structures, and protocol state. Typical uses include IoT sensor nodes, low-power industrial monitors, compact wearable electronics, battery-operated accessories, and embedded control modules. The 5 mm by 5 mm QFN land pattern also supports space-constrained designs where the exposed pad and board-level thermal layout require careful assembly. When designing the board, follow the manufacturer's recommended land pattern and provide the required decoupling capacitors close to the supply and ground pins. Confirm the available operating voltage, analog limits, and exact pin assignments in the manufacturer datasheet before layout release. This page consolidates verified distributor availability, manufacturer specifications, same-package drop-in candidates, and design considerations that help engineers evaluate the EFM32ZG110F4-QFN24 beyond a basic distributor parameter listing.

詢價 聯絡我們
EFM32ZG110F4-QFN24T - 24MHz Cortex-M0+ 4KB MCU | Silicon Labs
EFM32ZG110F4-QFN24T

EFM32ZG110F4-QFN24T - 24MHz Cortex-M0+ 4KB MCU | Silicon Labs

The Silicon Labs EFM32ZG110F4-QFN24T is a 24 MHz ARM Cortex-M0+ microcontroller with 4 KB of Flash memory, 2 KB of RAM, 17 digital I/O pins, and two 16-bit timers in a 24-QFN 5 x 5 mm package. It operates from a 1.98 V to 3.8 V supply and is designed for compact, energy-sensitive embedded systems. A microcontroller is an integrated semiconductor that combines a processor core, program memory, data memory, and peripherals in one package. The Zero Gecko family uses an ARM Cortex-M0+ core within the MCU hierarchy, while its low-power platform adds energy-saving modes, fast wake-up behavior, and autonomous peripheral operation. This makes it suitable for battery-powered sensing, metering, and small control systems that must respond quickly without continuously consuming maximum power. The EFM32ZG110F4-QFN24T combines a 24 MHz processor with 4 KB of Flash and 2 KB of SRAM. Silicon Labs specifies as little as 0.5 microamp in Stop mode and 114 microamps per MHz in Run mode, supporting designs that spend most of their operating life in a low-power state. Its 17 digital I/O pins provide connections for sensors, switches, indicators, and control signals within the limited footprint of a 5 x 5 mm QFN package. Two 16-bit timers support periodic timing, input capture, output compare, and basic pulse-width modulation functions. The Zero Gecko platform also integrates analog and communications peripherals around the 32-bit ARM Cortex-M0+ processor. The constrained 4 KB memory footprint favors compact firmware, while the 24 MHz clock rate provides adequate headroom for control loops, low-rate serial communication, and sensor aggregation rather than graphics or high-throughput data processing. Typical applications include compact energy meters, gas and water sensing nodes, battery-operated industrial monitors, environmental sensors, and wearable or IoT accessory controllers. The 24-QFN package also supports space-constrained products in which board area, supply voltage, and standby current are more important than large program storage. The -QFN24T ordering code identifies the manufacturer's tape-and-reel package format. Designers should verify the exact exposed-pad connection, decoupling requirements, and available peripheral pins against the EFM32ZG data sheet before layout release. Because the Flash and RAM capacities are small, firmware architecture, constant-data placement, and peripheral initialization sequence should be reviewed early rather than after application code is complete. This page consolidates manufacturer specifications, distributor availability references, same-footprint Zero Gecko alternatives, and application-specific engineering guidance that is not presented as a single block in the manufacturer data sheet.

詢價 聯絡我們