EFM32ZG110F32-B-QFN24 - 24MHz 32KB Low-Power MCU | Silicon Labs
MPN: EFM32ZG110F32-B-QFN24 ✓ 啟用中EFM32ZG110F32-B-QFN24 概覽
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. The EFM32 Zero Gecko family belongs to the hierarchy of 32-bit MCU, embedded processor, and energy-conscious embedded controller. Its role is to execute application firmware while measuring, communicating, or controlling other circuit functions. Silicon Labs positions the EFM32ZG family for battery-operated equipment and other systems that require low active and sleep-mode power consumption.
The EFM32ZG110F32-B-QFN24 provides a 24 MHz ARM Cortex-M0+ core, 32 KB Flash, and 4 KB RAM. Its 17 digital I/O pins support compact embedded designs, while the listed 2 x 16-bit timers provide dedicated timing resources. The operating supply range of 1.98 V to 3.8 V is suitable for low-voltage portable and energy-harvesting systems. The manufacturer also identifies the family as supporting output-state retention and wake-up from Shutoff Mode.
Silicon Labs highlights autonomous peripherals, high analog integration, and energy-saving capabilities as platform features. These characteristics can reduce CPU activity when peripherals handle routine measurement, timing, or communication tasks. The device is based on the 32-bit ARM Cortex-M0+ architecture and is suitable for firmware that requires modest processing performance, deterministic control, and careful attention to average current consumption. Programming and peripheral configuration are handled through the EFM32 development environment and the associated device programming workflow.
Typical uses include smart energy and gas or water metering, compact sensor nodes, portable industrial instruments, and battery-operated IoT equipment. The Zero Gecko platform is particularly appropriate when the design must wake frequently, preserve a limited amount of state, and operate from a constrained energy source. Its small 5 x 5 mm QFN package also supports compact PCB layouts where a larger package would be unnecessary.
PCB design should preserve the device's required power and decoupling structure and should follow the land pattern and exposed-pad requirements in the manufacturer package documentation. Designers should also review the device's pin multiplexing, clock configuration, and low-power mode entry conditions in the manufacturer datasheet. Validate wake-up behavior, peripheral operation, and firmware timing across the full intended voltage and temperature range.
This product page combines manufacturer specifications, lifecycle-oriented sourcing information, engineering design guidance, and clearly qualified drop-in assessment. Its main engineering value is distinguishing a true pin-compatible replacement from variants that differ only in reel packaging, qualification marking, or memory configuration, helping designers avoid PCB and firmware migration surprises.
直接替換替代品,適用於 EFM32ZG110F32-B-QFN24 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品EFM32ZG110F32-B-QFN24 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Series | EFM32 Zero Gecko |
| Maximum CPU Frequency | 24 MHz |
| Flash Memory | 32 KB |
| RAM Memory | 4 KB |
| Digital I/O Pins | 17 |
| Timers | 2 x 16-bit |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Processor Architecture | ARM Cortex-M0+ |
| Instruction Set Width | 32-bit |
| 封裝 | 24-QFN (5 x 5 mm) |
| Exposed Pad | Present |
| 安裝類型 | Surface mount |
| Stop Mode Current | As low as 0.5 uA |
| Run Mode Current | 114 uA/MHz |
| Low-Power Features | Fast wake-up, output-state retention, Shutoff Mode |
EFM32ZG110F32-B-QFN24 24-qfn (5 x 5 mm) 腳位配置指南
EFM32ZG110F32-B-QFN24(24-qfn (5 x 5 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: EFM32ZG110F32-B-QFN24.
請參閱 資料表 以查看完整腳位配置。
典型應用
EFM32ZG110F32-B-QFN24 適用於 6 應用s: Smart Energy Metering, Gas and Water Metering, Battery-Powered Sensor Node, Portable Industrial Instrument, IoT Condition Monitoring, Energy-Harvesting Controller.
Smart Energy Metering
The EFM32ZG110F32-B-QFN24 fits smart energy meters that periodically measure, process, and transmit data while remaining unattended on a constrained power budget. Its 24 MHz ARM Cortex-M0+ core and 32 KB Flash support compact metering firmware, while 4 KB RAM provides working space for samples and protocol state. The 1.98 V to 3.8 V supply range accommodates low-energy systems using a regulated battery or harvested source. Low-power modes, fast wake-up, and output-state retention help shorten inactive intervals, although final battery life must be calculated from the sensing load, communications schedule, regulator efficiency, and wake-up frequency.
推薦
Gas and Water Metering
EFM32ZG110F32-B-QFN24 is appropriate for gas and water meters that wake periodically to sample a sensor, update a total, and transmit a reading. The 17 digital I/O pins offer a compact interface for pulse sensors, valves, indicators, and control signals, while two 16-bit timers support timing-intensive measurement functions. Silicon Labs identifies the Zero Gecko family for energy, gas, water, and smart-metering applications. Its low-power operating behavior can limit the energy cost of long unattended deployments, but the meter designer must budget for sensor excitation, radio transmission, leakage current, and supply-conversion losses as well as MCU consumption.
推薦
Battery-Powered Sensor Node
The EFM32ZG110F32-B-QFN24 suits compact sensor nodes that sample an environmental or industrial signal and communicate it at intervals. Its 32 KB Flash can hold application firmware and calibration data, while the 24 MHz Cortex-M0+ core provides responsive control without requiring a higher-power processor. The Zero Gecko platform's fast wake-up and low-energy techniques are valuable when radio transmission dominates the energy budget. Designers should use the manufacturer guidance to select the appropriate sleep or Stop mode, disable unused peripherals, and confirm wake sources. The exposed-pad QFN package also needs a layout that supports reliable thermal and electrical performance.
推薦
Portable Industrial Instrument
EFM32ZG110F32-B-QFN24 can serve as the control processor in a portable industrial instrument that combines sensing, local display control, and a low-rate communications link. Its 17 digital I/O pins and two 16-bit timers provide enough resources for sensors, switches, status indicators, and periodic timing tasks in a compact design. The 1.98 V to 3.8 V operating range permits integration with low-voltage power systems. For instruments that spend most of their time waiting for an operator or measurement event, the family's low-power modes can reduce consumed energy. Firmware should retain only essential state, validate wake conditions, and account for regulator quiescent current when comparing battery endurance.
推薦
IoT Condition Monitoring
The EFM32ZG110F32-B-QFN24 is well matched to IoT condition-monitoring nodes that detect vibration, temperature, or equipment state and transmit exceptions rather than continuous high-rate data. The 24 MHz Cortex-M0+ core can perform local filtering and threshold decisions, while 32 KB Flash supports a compact application and 4 KB RAM supports short acquisition buffers. Its low-power characteristics help preserve battery life during long idle periods, and fast wake-up can make response times more predictable. Design the firmware around interrupt-driven sampling and the manufacturer's energy-saving modes. Also include a local hysteresis or debounce policy to prevent repeated radio transmissions when a measured value remains close to a threshold.
推薦
Energy-Harvesting Controller
EFM32ZG110F32-B-QFN24 can act as the supervisory controller in an energy-harvesting system that stores limited harvested energy and operates only when sufficient power is available. The low 1.98 V minimum supply and the family's low-power operating modes help align the MCU with constrained energy budgets. Its 17 digital I/O pins and two 16-bit timers can supervise energy-storage, load-switching, and measurement functions. The design must include strict brownout handling, energy-storage sizing, and a deterministic path for retaining essential measurement state between power interruptions. Use the manufacturer documentation to verify which peripherals remain operational in each low-power state and whether a new energy window can reset or corrupt active measurements.
推薦
推薦產品摘要
工程參考資料,適用於 EFM32ZG110F32-B-QFN24 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Silicon Labs |
| Package | 24-QFN (5 x 5 mm) |
| Processor Core | ARM Cortex-M0+ |
| Maximum CPU Frequency | 24 MHz |
| Flash Memory | 32 KB |
| RAM Memory | 4 KB |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Digital I/O Pins | 17 |
| Timers | 2 x 16-bit |
| Stop Mode Current | As low as 0.5 uA |
主要差異化特點
- Low-power processing within a compact 24-QFN footprint (對比EFM32TG110F32-QFN24)
- Purpose-built resource mix for compact metering designs (對比EFM32TG110F32-QFN24)
- Low-voltage operation for energy-constrained systems (對比EFM32TG110F32-QFN24)
設計說明
Follow the Silicon Labs QFN land pattern and exposed-pad requirements rather than creating a generic QFN footprint. Place the required input, output, and decoupling capacitors close to their corresponding pins, and connect the exposed pad according to the package drawing. The exposed pad may be tied to the device supply or ground according to the recommended layout, so verify the exact recommendation in the manufacturer package documentation before release.
Estimate average battery consumption by including MCU Run current, sleep-mode current, sensor excitation, regulator losses, and radio activity rather than considering the processor alone. The EFM32 Zero Gecko family is cited as consuming as little as 0.5 uA in Stop mode and 114 uA/MHz in Run mode. Use measured duty-cycle assumptions with those figures to compare battery-life scenarios and confirm the behavior of every active peripheral during sleep.
Do not assume that all peripherals continue operating identically in every low-energy state. Confirm wake sources, interrupt behavior, retained output states, and the time required to resume execution in the EFM32ZG datasheet. For metering and sensor designs, retain only the minimum required state before sleep and test repeated wake, brownout, and data-capture sequences to avoid duplicate measurements or corrupted counters.
Keep sensitive analog and communication paths away from fast-switching nodes and noisy power-converter layouts. Because this device supports analog functions and can be placed beside sensor circuitry, preserve a quiet return path and follow the manufacturer's recommendations for grounding, decoupling, and exposed-pad connection. Validate the completed board for current consumption, wake timing, oscillator startup, and communication integrity rather than relying only on schematic review.
合規資訊
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. The B suffix alone is not treated as evidence of automotive qualification.