EP2S90F780I4
EP2S90F780I4 - Stratix II FPGA 90K LE FBGA-780 | Intel
The Intel EP2S90F780I4 is a high-density Stratix II family Field Programmable Gate Array (FPGA) housed in a 780-pin FineLine BGA (FBGA-780, 29 x 29 mm, 1 mm pitch) package, delivering up to 90,960 logic elements and 4,520,488 bits of embedded RAM. It provides 4,548 Logic Array Blocks (LABs), 12 dedicated DSP blocks (for up to 96 18x18 multipliers), 534 user I/O pins, and operates with an internal clock tree supporting frequencies up to 717 MHz per the manufacturer datasheet.
An FPGA (Field Programmable Gate Array) is a reconfigurable semiconductor device that lets designers implement custom digital logic - combinational and sequential functions, memory blocks, and high-speed transceivers - on the same silicon after fabrication. Within the power-management hierarchy, FPGAs sit alongside microcontrollers, DSPs, and ASICs as programmable logic; the Stratix II family specifically targets high-performance applications such as high-speed digital signal processing, telecommunications backplanes, and ASIC prototyping. EP2S90F780I4 occupies the high-end of this family and shares the same architecture as other Stratix II members.
Key features include up to 1,152 Kbits of embedded M512/M4K/M-RAM block memory distributed across 4,520,488 bits total, 12 DSP blocks capable of 18x18-bit signed multiplication at full speed, and eight phase-locked loops (PLLs) for clock synthesis and skew management. The device supports multiple I/O standards (LVDS, LVPECL, SSTL, HSTL, PCI, PCI-X) on its 534 user I/O pins, enabling direct interface to DDR/DDR2 SDRAM memories and external parallel buses. Adaptive logic modules (ALMs) provide 8 inputs per module, a 2x improvement over the previous Stratix generation.
The 90 nm CMOS process, 1.2 V core voltage, and dedicated hard IP blocks deliver industry-leading performance-per-watt for its era. The internal TriMatrix memory architecture splits on-chip RAM into three block sizes (M512, M4K, M-RAM) so engineers can allocate memory density versus width efficiently. Routing architecture is segmented into row, column, and local interconnects, supporting timing closure for designs operating at hundreds of MHz.
Typical applications for the EP2S90F780I4 include high-performance ASIC prototyping and emulation, telecommunications baseband and bridging equipment, high-speed serial protocol bridging (SPI 4.2, SFI-4, UTOPIA), broadcast video processing, and military/aerospace signal processing. The -I speed/temperature grade (-40C to +100C case) targets industrial and defense applications.
When designing with the EP2S90F780I4, engineers must consider the 29 x 29 mm BGA footprint which requires at least 6 PCB layers with microvia technology for fan-out, and the 534 user I/Os which often demand SSTL-2 or LVPECL termination networks. Power integrity analysis is essential because the device can exceed 20 W at full utilization; a multi-rail synchronous buck DC-DC design with at least four voltage rails (VCCINT, VCCIO banks, VCCA, VCCD_PLL) is recommended.
This page consolidates distributor stock data, drop-in alternatives within the Stratix II family, and practical design notes that extend beyond the manufacturer datasheet for engineers evaluating the EP2S90F780I4 in legacy designs.
詢價
聯絡我們