產品(44,000+)

MC9S08RD16FG - 8-Bit 8MHz 16KB MCU | Motorola | 44-LQFP
MC9S08RD16FG

MC9S08RD16FG - 8-Bit 8MHz 16KB MCU | Motorola | 44-LQFP

Motorola MC9S08RD16FG is an 8-bit S08 microcontroller with an 8 MHz clock, 16 KB of flash memory, and a 44-LQFP package measuring 10 mm by 10 mm. The HC08/S08 processor combines embedded flash and microcontroller peripherals in a compact surface-mount package suited to cost-sensitive embedded control systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral functions onto one device. The S08 architecture belongs to the broader 8-bit microcontroller family and is commonly used for compact control tasks involving digital inputs, outputs, timers, communications, and analog signal conditioning. Compared with a discrete processor design, an integrated MCU reduces component count, simplifies firmware deployment, and keeps the control system physically compact. The MC9S08RD16FG combines 16 KB of flash memory with an 8 MHz operating clock in a 44-pin LQFP package. Its flash-based program memory permits firmware to be retained when power is removed and updated through the device programming workflow. The 44-LQFP format provides substantially more external connections than smaller 8-bit packages, allowing more peripheral signals to reach the processor without requiring a larger board footprint. The S08 CPU is designed for embedded control rather than high-performance computing. Its 8-bit architecture is appropriate for sequential logic, timers, communication protocols, and system-state monitoring, while the 8 MHz clock establishes the device’s operating-rate class. Exact memory architecture, peripheral assignments, electrical limits, and timing figures should be confirmed against the manufacturer datasheet before schematic capture, firmware configuration, or PCB layout. Typical uses for this controller class include industrial panel controls, building and access equipment, appliance control boards, instrumentation, and compact motor-control interfaces. A 44-LQFP device is particularly useful when a design needs more I/O than a small-package MCU while retaining a straightforward embedded programming model. The 10 mm by 10 mm package also remains practical for multilayer boards where adequate escape routing is available. Design planning should begin with the manufacturer pin-description table and the electrical characteristics section. Confirm which peripheral functions are available on each package pin, whether unused pins require specific termination, what clock and reset connections are required, and which programming or debug interfaces are used. Component values, decoupling requirements, and allowed tolerances should follow the datasheet recommendations rather than generic MCU conventions. This product page consolidates the verified device identity, package information, sourcing path, technical alternatives, and application guidance into an engineering-focused reference. The comparison also distinguishes documented electrical facts from parameters that still require direct confirmation, helping designers evaluate the MC9S08RD16FG before committing it to an embedded-control design.

詢價 聯絡我們
MC9S08RD16FJ - 8-Bit 8MHz 16KB Flash MCU | NXP | 32-LQFP
MC9S08RD16FJ

MC9S08RD16FJ - 8-Bit 8MHz 16KB Flash MCU | NXP | 32-LQFP

NXP Semiconductors MC9S08RD16FJ is an 8-bit S08 microcontroller rated for an 8 MHz operating frequency, with 16 KB of Flash program memory, in a 32-LQFP 7 x 7 mm package. It operates from 1.8 V to 3.6 V, making it suitable for low-voltage embedded control systems that need compact packaging, deterministic control, and a straightforward peripheral-oriented design. A microcontroller is a programmable embedded controller that combines a processor core, nonvolatile program memory, working memory, and peripherals on one semiconductor device. The S08 architecture belongs to the 8-bit microcontroller hierarchy, where an embedded CPU executes firmware while timers, serial interfaces, and input/output ports support real-time control tasks. Compared with a discrete logic controller, an MCU reduces component count and centralizes application behavior in firmware. The MC9S08RD16FJ combines a 16 KB Flash memory capacity with an 8 MHz clock in a 32-LQFP package. Its 1.8 V to 3.6 V operating range supports both low-voltage digital systems and industrial or consumer equipment operating from regulated 3.3 V rails. The 7 x 7 mm LQFP format provides a leaded, inspectable package option that can simplify assembly and prototype rework compared with a very small non-leaded package. This part belongs to the MC9S08RD16 family of S08 embedded processors and controllers. The product listing identifies the device as an 8-bit, 8 MHz MCU with 16K x 8 Flash memory, while the family name provides a consistent basis for firmware and hardware planning. Designers should verify the detailed clock, memory-map, peripheral, pin, and electrical limits in the manufacturer datasheet before fixing the operating configuration. Typical application areas include small sensor controllers, building-access peripherals, compact motor-control modules, industrial monitoring equipment, and low-power IoT endpoints. The MCU is particularly appropriate when the system requires local logic, serial communications, digital I/O, and firmware updates without the processing overhead of a 32-bit processor. Its 8 MHz clock is suitable for deterministic control loops that do not require intensive computation. A key design consideration is validating every electrical limit, peripheral function, and alternate-function assignment against the exact package pinout before schematic capture. Designers should also confirm that the selected Flash programming and debug workflow matches the S08 development toolchain. Because different MCU families require different peripheral setups and firmware initialization, software migration should not be treated as a drop-in operation. This product page consolidates the verified package, clock, memory, voltage-range, and architecture information into an engineering-oriented selection guide. It also identifies the information that must be checked in the manufacturer datasheet, helping teams distinguish a suitable replacement from a merely similar microcontroller before committing to a PCB or firmware revision.

詢價 聯絡我們
MC9S08RD16PE 8-Bit 8MHz 16KB Flash MCU | NXP | DIP
MC9S08RD16PE

MC9S08RD16PE 8-Bit 8MHz 16KB Flash MCU | NXP | DIP

NXP Semiconductors MC9S08RD16PE is an 8-bit S08 microcontroller with an 8 MHz operating frequency, 16 KB of Flash program memory, and a 28-pin plastic DIP package. It is designed for embedded control applications that require a compact through-hole microcontroller, nonvolatile program storage, and an established S08 peripheral and software ecosystem. A microcontroller is a semiconductor device that integrates a processor core, memory, peripherals, and input/output functions on one integrated circuit. Within the product hierarchy, the MC9S08RD16PE is an embedded microcontroller, an 8-bit MCU, and a member of the S08 family of general-purpose semiconductor controllers. Its DIP construction supports prototyping, educational platforms, legacy industrial equipment, and systems assembled through conventional through-hole insertion. The principal identified specifications are an 8-bit processing architecture, 8 MHz maximum clock frequency, and 16 KB organized as 16K by 8 bits of Flash memory. The 28-PDIP package has a 7.62 mm row pitch according to the product listing. These characteristics distinguish it from higher-pin-count S08 devices and make it appropriate for designs whose external interfaces and memory requirements fit a 28-pin controller. The S08 architecture combines a modest central processing unit with embedded Flash and hardware peripherals for control-oriented designs. Flash memory retains programmed instructions when power is removed, eliminating the need for a separate program-memory device. Because the MC9S08RD16PE is specified for an 8 MHz clock, designers should use clock, timing, and peripheral constraints from the manufacturer datasheet when configuring bus activity, interrupts, timers, and communication interfaces. Typical applications include motor and pump controllers, appliance control panels, simple instrumentation, keypad interfaces, LED status systems, and small industrial control boards. A through-hole DIP package is especially convenient when an existing control board must be assembled manually or maintained without a fine-pitch rework process. Firmware can also use the established S08 development tools and application notes associated with the family. Design around the exact electrical limits in the manufacturer datasheet, including supply voltage, I/O limits, clock configuration, reset behavior, and programming connections. Place decoupling capacitors close to the supply pins, route the oscillator network according to the reference layout, and verify unused pins before production. The 28-pin footprint allows straightforward socket-based prototyping, but production assemblies should include adequate cleaning and soldering controls. This product record combines the exact ordering information, core architecture, memory, clock, and package characteristics with practical guidance for replacement evaluation, PCB planning, and firmware integration. It also distinguishes the verified MC9S08RD16PE configuration from less specific cross-reference results and highlights where a component substitution must be checked against pinout, electrical ratings, and device revision details.

詢價 聯絡我們
MC9S08RD16PE-FR 8-Bit 16KB Flash MCU | NXP
MC9S08RD16PE-FR

MC9S08RD16PE-FR 8-Bit 16KB Flash MCU | NXP

The NXP Semiconductors MC9S08RD16PE-FR is an 8-bit HCS08 microcontroller operating at up to 8 MHz, with 16 KB of flash memory and a 28-pin plastic DIP package. It combines a compact general-purpose MCU platform with on-chip program flash in a through-hole package suited to legacy control systems, educational hardware, industrial controllers, and service instruments. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, input/output ports, timers, and communication peripherals on one device. The HCS08 MCU belongs to the embedded-controller hierarchy: 8-bit microprocessor core, microcontroller, embedded processing IC, and semiconductor. Its on-chip flash permits firmware to be stored locally rather than in an external memory chip, simplifying both board design and field programming. The verified distributor data identifies the S08 family, an 8 MHz operating class, 16 KB organized as 16K x 8 flash, and a 28-pin plastic DIP package. The -FR ordering suffix is associated with the reel-packaged ordering designation, while the verified distributor listing identifies the target as a 28-PDIP. Additional electrical limits, timer resources, serial interfaces, ADC performance, operating temperature, and pin assignments are not present in the supplied source excerpts and therefore must be checked against the manufacturer datasheet before design release. The 28-PDIP form factor supports conventional through-hole assembly and hand-soldered prototypes. Its larger lead pitch and accessible package geometry make it useful where a fine-pitch surface-mount MCU would complicate inspection, rework, or education. Because this is a legacy MCU family, firmware, clock, reset, peripheral, and memory-map compatibility should be checked carefully when replacing another device. Typical uses include small control panels, sensor-conditioning systems, appliance controllers, laboratory fixtures, and legacy industrial interfaces. The 8 MHz S08 core and 16 KB flash provide sufficient resources for compact embedded logic, but they are not interchangeable with 16- or 32-bit processors when higher arithmetic throughput, larger memory, or high-speed networking is required. Design should begin with the exact datasheet pinout, supply limits, decoupling requirements, programming interface, and oscillator options. Validate every used pin, peripheral resource, and timing requirement because only the package, architecture, frequency class, and flash capacity are verified here. A careful schematic and firmware comparison prevents a package-compatible part from being treated as an electrically or software-compatible replacement without evidence.

詢價 聯絡我們
MC9S08RD32CDWE - 8-Bit 8MHz 32KB MCU | NXP | SOIC-28
MC9S08RD32CDWE

MC9S08RD32CDWE - 8-Bit 8MHz 32KB MCU | NXP | SOIC-28

The NXP MC9S08RD32CDWE is an 8-bit S08 microcontroller with an 8 MHz maximum clock and 32 KB of flash memory, supplied in a 28-pin SOIC package. The verified distributor records identify it as the MC9S08RD32 device in an AQUILA lead-free configuration, combining an 8-bit MCU architecture with embedded flash and a compact through-hole-style surface-mount package. A microcontroller is a programmable semiconductor that integrates a processor core, memory and peripherals into one device. The S08 family is positioned for cost-sensitive embedded control, while the MC9S08RD32 device provides 32K × 8 flash organization for firmware storage. In the broader hierarchy, this part is an MCU, a semiconductor and a member of the NXP S08 microcontroller family. The key verified features are the 8-bit CPU, 8 MHz operating speed, 32 KB flash memory and 28-pin SOIC package. These values are suitable for compact embedded controllers that need a dedicated nonvolatile program memory area. The distributor listings also describe the part as lead-free, but no detailed environmental, supply-voltage, RAM, timer, serial-interface or temperature data were supplied in the verified source set. Because the provided sources do not include a complete manufacturer datasheet, electrical limits and peripheral assignments should not be inferred from the MPN alone. Designers should consult the applicable NXP or Freescale datasheet before fixing supply voltage, peripheral connections, reset behavior and timing. The 28-SOIC footprint also requires a board layout that matches the exact land pattern and pin numbering of this variant. Typical embedded uses for this class of part include simple motor or relay control, keypad interfaces, sensor acquisition, LED indication and low-power control panels. The 8 MHz processing rate and 32 KB flash storage are concrete selection criteria for these designs. A practical design should reserve programming/debug access, decouple the supply rails as specified by the full datasheet, and validate reset and unused-pin behavior on the production PCB. This page consolidates the verified distributor identity, package, memory and clock data with structured sourcing and honest limitations. It is intended to help engineers locate the correct MCU documentation, compare sourcing records and assess whether the 8-bit, 32 KB, 8 MHz device matches a legacy embedded-control design before requesting a quote.

詢價 聯絡我們
MC9S08RD32DWE - 8-Bit 8MHz 32KB MCU | NXP | SOIC-28
MC9S08RD32DWE

MC9S08RD32DWE - 8-Bit 8MHz 32KB MCU | NXP | SOIC-28

The NXP Semiconductors MC9S08RD32DWE is an 8-bit S08 CISC microcontroller with 8 MHz processing speed, 32 KB of Flash memory, and a 28-pin SOIC package. It operates from a 2.5 V or 3.3 V supply according to the distributor specifications and belongs to the AQUILA microcontroller family. The device is intended for embedded control, communications, measurement, and low-to-medium-cost industrial designs that require a compact 8-bit MCU with integrated Flash program memory. A microcontroller is a semiconductor device that integrates a processor core, memory, peripherals, and I/O into one embedded-control component. The MC9S08RD32DWE belongs to the S08 8-bit MCU family, using a CISC architecture optimized for control-oriented embedded software. Its position in the hierarchy is microcontroller → embedded processor → integrated circuit, while its practical role is to execute firmware, read inputs, drive outputs, and communicate with external hardware. The available specification data identifies an 8-bit core, 8 MHz operating speed, and 32 KB of high-speed Flash memory. Distributor listings also identify SCI connectivity and describe the device as an AQUILA SOIC lead-free MCU. These characteristics make it suitable for designs requiring deterministic embedded control without the memory demands of a higher-end 32-bit processor. The 32 KB Flash capacity allows firmware, configuration tables, and application logic to be stored on the MCU itself. Typical designs using this MCU include small industrial controllers, sensor-interface boards, serial communication equipment, keypad and display controllers, and compact embedded products. SCI connectivity is useful for point-to-point serial links, while the general-purpose MCU architecture supports timers, input/output, and other peripherals described in the manufacturer documentation. The exact peripheral configuration and electrical limits should be confirmed against the manufacturer datasheet before final schematic approval. A key design consideration is supply and signal compatibility. Use the datasheet's specified voltage range, pin multiplexing, reset requirements, decoupling recommendations, and programming procedure. Do not infer that every S08 device is pin-compatible merely because it uses the same core; package pin assignments and peripheral functions must match exactly. The 28-pin SOIC footprint also requires checking lead pitch and board layout before substitution. This page combines the verified distributor specifications, source links, and practical sourcing guidance for MC9S08RD32DWE. It is intended to help engineers evaluate the MCU, locate its documentation, compare possible alternatives, and plan a controlled replacement or redesign.

詢價 聯絡我們
MC9S08RD32PE - 8-Bit 8MHz 32KB Flash MCU | NXP | Industrial
MC9S08RD32PE

MC9S08RD32PE - 8-Bit 8MHz 32KB Flash MCU | NXP | Industrial

The NXP Semiconductors MC9S08RD32PE is an 8-bit S08 microcontroller operating at 8 MHz, with 32 KB of Flash memory, in a 28-pin PDIP package. It is designed for embedded control systems requiring a compact, low-cost microcontroller with integrated Flash program memory and a 2.5 V or 3.3 V supply option. A microcontroller is a programmable semiconductor device that combines a CPU core, memory, peripherals, and input/output functions on one integrated circuit. The S08 architecture is an 8-bit CISC-style embedded-control core commonly used in industrial, appliance, consumer, and communications equipment. MC9S08RD32PE belongs to the broader semiconductor hierarchy of MCU, embedded processor, and embedded-control IC. Key verified attributes include an 8-bit MCU architecture, 8 MHz operating frequency, 32 KB Flash memory organized as 32K x 8, and a 28-pin PDIP package. Distributor records also identify the part as an S08 microcontroller and list its operation at 2.5 V or 3.3 V. Exact RAM, peripheral, temperature, timing, and package-dimension values require confirmation from the manufacturer datasheet before final design release. The device is suitable for motor and relay control, sensor acquisition, industrial control panels, appliance controllers, embedded instrumentation, and communications modules. A designer should verify every peripheral, pin, electrical limit, and timing requirement against the applicable datasheet because the supplied search data does not include a complete electrical specification table. The 28-pin PDIP package favors through-hole prototyping and legacy control boards. Confirm pin assignments, oscillator connections, programming interfaces, reset behavior, and supply decoupling before layout. Because the available records show distributor inventory references but do not provide a complete manufacturer lifecycle statement, lifecycle status is retained as active only for this generated data version. This product page consolidates the verified distributor identity, package, Flash memory, clock, and supply information with sourcing and design considerations. It does not replace the manufacturer datasheet, which remains the controlling source for electrical limits, timing, pin definitions, and production qualification.

詢價 聯絡我們
MC9S08RD60CFG - 8-Bit 8MHz 60KB Flash MCU | Motorola
MC9S08RD60CFG

MC9S08RD60CFG - 8-Bit 8MHz 60KB Flash MCU | Motorola

The Motorola MC9S08RD60CFG is an 8-bit S08 CISC microcontroller with a 8 MHz operating frequency, 60 KB of embedded flash memory, and a 44-LQFP package measuring 10 x 10 mm. It is designed for embedded control applications requiring deterministic 8-bit processing, on-chip nonvolatile program storage, and a compact gull-wing surface-mount footprint. The device operates from a 2.5 V or 3.3 V supply according to the family datasheet. An S08 microcontroller belongs to the 8-bit microcontroller family, which sits within the embedded-processing hierarchy of microcontroller, embedded processor, and semiconductor. Compared with 16-bit and 32-bit controllers, an 8-bit S08 device offers a simple instruction set and predictable execution behavior for motor control, appliance control, instrumentation, and dedicated peripheral management. Its on-chip flash reduces the need for external program memory in cost-sensitive embedded products. Key characteristics include a maximum clock frequency of 8 MHz, 60 KB of flash organized as 60K x 8, and an industrial temperature grade. The 44-LQFP package exposes the controller in a standardized square gull-wing format suitable for automated assembly and multilayer printed circuit boards. The part is identified by the MC9S08RD60CFG order code, with the final suffix denoting the specific package, temperature, and ordering configuration. The S08 architecture uses a CISC-style instruction set with an integrated interrupt mechanism for responsive event handling. Program and constant data are stored in the internal flash array, while the device also provides the peripheral resources expected for embedded control applications. Exact RAM organization, peripheral channel counts, analog reference performance, and conversion timing should be confirmed in the MC9S08RD60 family datasheet before a new PCB is released. Typical uses include industrial sensor controllers, motor and valve control modules, compact appliance controllers, building equipment interfaces, and low-cost peripheral boards. The 8 MHz S08 core is appropriate when tasks combine digital I/O, timers, serial communication, and modest control calculations rather than intensive data processing or high-resolution graphics. When designing a board, follow the family pin-description table for every signal assignment and place bypass capacitors close to the supply pins. Confirm operating voltage, clock configuration, peripheral multiplexing, and programming headers against the manufacturer documentation. Because legacy-package suffixes can differ in temperature grade and lifecycle treatment, confirm the exact ordering code before releasing a production BOM. This page organizes the core device identity, package information, sourcing path, alternative considerations, and engineering guidance into one reference. It also highlights the checks that matter most when sustaining an existing MC9S08RD60CFG design, including pin compatibility, supply voltage, temperature grade, code compatibility, and long-term procurement planning.

詢價 聯絡我們
MC9S08RD60CPE-FR - 8-Bit 8MHz 60KB Flash MCU | NXP
MC9S08RD60CPE-FR

MC9S08RD60CPE-FR - 8-Bit 8MHz 60KB Flash MCU | NXP

The NXP Semiconductors MC9S08RD60CPE-FR is an 8-bit S08 microcontroller with an 8 MHz operating frequency, 60 KB of flash program memory, and a 28-pin PDIP package. It is designed for embedded control applications requiring deterministic 8-bit processing, on-chip flash, serial communication, and integrated timing and supervisory peripherals. The device supports 2.5 V and 3.3 V supply operation and provides 2K x 8 RAM according to the verified product data. A microcontroller is a programmable semiconductor that combines a processor core, memory, input/output ports, and peripherals in one integrated circuit. In the system hierarchy, the MC9S08RD60CPE-FR belongs to the 8-bit microcontroller family, with an S08 CISC core and embedded flash memory. It is intended for industrial control, appliance control, instrumentation, communications, and general-purpose embedded products where a compact controller can manage sensors, actuators, user interfaces, and communication tasks. The verified specifications identify an S08 core, 8-bit architecture, 8 MHz speed, 60 KB flash organized as 60K x 8, 2K x 8 RAM, 23 I/O pins, SCI connectivity, PWM, a watchdog timer, low-voltage detection, and power-on reset. These features allow the MCU to provide a self-contained control platform without requiring separate program-memory devices. The 28-PDIP package also supports conventional through-hole PCB assembly and breadboard or prototype construction. The MCU's architecture combines an 8-bit S08 CISC processor with embedded flash and peripheral functions optimized for embedded control. SCI connectivity supports serial data exchange, while PWM supports time-based output generation. The watchdog timer, low-voltage detection, and power-on reset functions help system designers implement supervision and controlled startup behavior. These features are useful in systems requiring basic fault handling without a higher-complexity control architecture. Typical applications include appliance and domestic equipment controllers, motor or actuator supervisory systems, simple serial communications equipment, industrial sensors, keypad and display interfaces, and low-cost embedded automation products. The 8 MHz operating frequency provides a practical balance between processing capability, power consumption, and implementation simplicity for these applications. Engineers should verify peripheral mappings, timing requirements, and memory utilization against the manufacturer documentation before production release. A key design consideration is that this part is listed as obsolete in the supplied verified data. New designs should therefore confirm lifecycle status and sourcing with the manufacturer or an authorized distributor before committing to the MPN. For existing equipment, preserve the original controller and validate any replacement for pin, electrical, timing, and firmware compatibility rather than assuming that a similar S08 device is interchangeable. This product page consolidates the verified distributor specifications, package identity, lifecycle information, application context, and replacement limitations for MC9S08RD60CPE-FR. It is intended to support engineering evaluation while clearly separating confirmed data from parameters that require additional verification.

詢價 聯絡我們
MC9S08RD60DWE - 8-Bit 8 MHz 60 KB MCU | NXP | 28-SOIC
MC9S08RD60DWE

MC9S08RD60DWE - 8-Bit 8 MHz 60 KB MCU | NXP | 28-SOIC

NXP Semiconductors MC9S08RD60DWE is an 8-bit S08 microcontroller operating at 8 MHz, with 60 KB of flash memory and a 28-pin SOIC package. It combines a compact embedded-control footprint with 60,000 bytes of program storage, making it suitable for cost-sensitive embedded products that need readable peripheral control and deterministic firmware execution. Distributor records identify the device as the lead-free 28-SOIC AQUILA configuration, but detailed electrical limits, RAM capacity, timer resources, and pin assignments must be confirmed in the manufacturer datasheet before a hardware release. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, and peripherals such as GPIO, timers, serial interfaces, and interrupt logic. The S08 architecture sits within the broader 8-bit microcontroller hierarchy: MC9S08RD60DWE combines an MCU with embedded flash memory and a surface-mount package. Compared with higher-bit microcontrollers, an 8-bit architecture generally emphasizes simple control logic, efficient event handling, and a compact instruction set rather than high-throughput computation or complex memory-intensive workloads. The defining verified specifications are the 8-bit CPU class, 8 MHz maximum stated frequency, and 60 KB flash organization. Flash retains program code when power is removed and supports field-programmable embedded systems. The 28-SOIC package offers a familiar leaded surface-mount format that is mechanically straightforward for production assembly. The product is described by distributors as lead-free, but comprehensive RoHS, REACH, halogen-free, and conflict-minerals declarations were not present in the supplied evidence and therefore remain unverified here. MC9S08RD60DWE belongs to the S08 RD/AQUILA product family and is positioned for embedded appliances, simple control panels, instrumentation, keypad interfaces, actuator controllers, and small motor-control systems. Firmware requirements should be checked against the available RAM, peripherals, clock options, timers, communication ports, and pin multiplexing in the datasheet. Existing code also needs source- and binary-level review because a 28-pin package match alone does not establish software compatibility. Power design begins with the manufacturer's absolute maximum and recommended operating limits, which were not included in the supplied search excerpts. Validate supply voltage, I/O levels, clock tolerances, decoupling requirements, and reset behavior against the official documentation. The 8 MHz core can reduce execution time compared with slower 8-bit designs, but actual response time depends on firmware, bus timing, peripheral configuration, interrupt latency, and whether the system operates continuously or uses low-power modes. This product page combines verified distributor specifications, sourcing links, a downloadable datasheet pointer, application guidance, and drop-in alternative screening. Because no complete manufacturer datasheet extract was supplied, unavailable electrical, environmental, timing, memory, and pin-level values are deliberately marked for verification rather than estimated. Prototype engineers should also download the NXP datasheet and confirm programming-tool, debugger, and software-library support for the complete device variant.

詢價 聯絡我們
MC9S08RD60PE 8-Bit 8MHz 60KB Flash 28-PDIP MCU
MC9S08RD60PE

MC9S08RD60PE 8-Bit 8MHz 60KB Flash 28-PDIP MCU

The NXP Semiconductors MC9S08RD60PE is an 8-bit S08 microcontroller with an 8 MHz operating frequency, 60 KB of built-in flash memory, and a 28-pin PDIP package. It is intended for embedded control applications requiring a compact, low-power microcontroller with integrated program storage. The device operates from a 1.8 V to 3.6 V supply range and is specified for a 0 °C to 70 °C ambient temperature range. A microcontroller is a semiconductor device that combines a processor core, memory, peripheral interfaces, and control logic into one integrated component. The MC9S08RD60PE belongs to the S08 8-bit microcontroller family and provides a dedicated embedded platform for sensing, control, communication, and actuator functions. Its integrated flash memory allows firmware and application code to be stored directly on the device. The principal specifications identify an 8-bit architecture, 8 MHz clocking, and 60 KB of flash organized as 60K by 8 bits. The 28-PDIP mechanical package is suitable for through-hole PCB assembly, prototyping, education, and legacy industrial equipment where a leaded package is preferred. The operating range of 1.8 V to 3.6 V supports low-voltage embedded systems, while the stated temperature range targets commercial-temperature applications. Typical uses include motor and relay control, industrial instrumentation, appliance controllers, battery-powered equipment, and embedded educational projects. The 8-bit processing architecture is appropriate for straightforward control loops, digital I/O expansion, status monitoring, and low-bandwidth peripheral communication. The 60 KB flash capacity provides space for application firmware, configuration tables, calibration constants, and communication routines. Designers should confirm the complete electrical limits, peripheral allocation, clock configuration, programming method, and pin multiplexing against the manufacturer datasheet before releasing a PCB. Because the PDIP package exposes through-hole leads, layout planning should include the device footprint, programming connector, decoupling strategy, and any external crystals, oscillators, or interface components. This product page consolidates the verified device identity, package, memory, clock, voltage, temperature, sourcing information, and engineering guidance for designers evaluating the MC9S08RD60PE in embedded control systems.

詢價 聯絡我們
MC9S08RD8CDWE-FR - 8MHz 8KB Flash 28-SOIC MCU | NXP
MC9S08RD8CDWE-FR

MC9S08RD8CDWE-FR - 8MHz 8KB Flash 28-SOIC MCU | NXP

The NXP Semiconductors MC9S08RD8CDWE-FR is an 8-bit S08 microcontroller with an 8 MHz core, 8 KB of Flash memory, and a 28-SOIC package. It is designed for embedded control applications requiring a compact 8-bit MCU with integrated Flash program memory and a 2.5 V or 3.3 V supply option. What is an 8-bit microcontroller? An 8-bit microcontroller is a compact embedded-control semiconductor that executes digital control logic, reads inputs, drives outputs, and manages peripherals on a single integrated circuit. The S08 family belongs to the microcontroller and embedded-processing hierarchy, combining a CPU core, memory, timers, communication interfaces, and interrupt control in one package. The verified distributor data identifies the device as an S08 8-bit MCU operating at 8 MHz with 8 KB, or 8K x 8, of Flash memory. It is supplied in a 28-pin SOIC package. The -FR ordering suffix is associated with the listed NXP product offering, while detailed electrical limits, peripheral inventory, temperature grades, and pin names were not included in the provided source data and therefore require verification from the manufacturer datasheet before design release. Typical embedded uses include basic industrial control, keypad and display interfaces, sensor conditioning, simple motor or relay control, and low-cost embedded products. Its 8-bit architecture is suitable when the application is dominated by digital I/O, control sequencing, and modest computation rather than high-throughput processing. For PCB design, confirm the 28-SOIC footprint, pin assignments, voltage tolerances, oscillator requirements, programming interface, and decoupling recommendations against the official MC9S08RD8CDWE datasheet. The available verified data is sufficient to identify the core, speed, memory, package, and distributor listings, but not to establish a complete production specification set.

詢價 聯絡我們
MC9S08RD8CFJ - 8-Bit 8MHz S08 MCU | 32-LQFP
MC9S08RD8CFJ

MC9S08RD8CFJ - 8-Bit 8MHz S08 MCU | 32-LQFP

The Motorola MC9S08RD8CFJ is an 8-bit S08 microcontroller operating at up to 8 MHz, with 8 KB of built-in Flash memory and 1 KB of RAM in a 32-LQFP 7 x 7 mm package. The verified distributor listing also identifies a 1.8 V to 3.6 V operating-voltage range and an industrial temperature range of -40°C to +85°C. An S08 microcontroller is an embedded processing component designed to execute firmware, read inputs, control outputs, and manage communication tasks in a compact embedded system. The term microcontroller describes a processor core, memory, and peripherals integrated on one semiconductor device. In the product hierarchy, the MC9S08RD8CFJ belongs to the S08 family of 8-bit microcontrollers, where the 8-bit architecture supports economical control-oriented systems with relatively low software and hardware complexity. The principal features supported by the verified data are an 8 MHz maximum operating frequency, 8 KB of built-in Flash program memory, 1 KB of RAM, an 8-bit processor architecture, and a 32-LQFP package measuring 7 x 7 mm. Built-in Flash permits firmware to be stored directly on the microcontroller, while the 1 KB RAM provides volatile working memory for stack, variables, and runtime operations. The 1.8 V to 3.6 V operating range supports low-voltage embedded equipment. The MC9S08RD8CFJ is specifically identified as part of the S08 product family and is positioned for applications requiring compact, deterministic embedded control. Its 8-bit architecture and 8 MHz operating rate are suitable for supervisory control loops, programmable logic functions, panel interfaces, and basic peripheral control. The verified distributor excerpt does not enumerate the complete peripheral set, clock configuration, timer implementation, or communication blocks, so those details should be checked against the manufacturer documentation before final design approval. Typical use cases include industrial control modules, building equipment, appliance controllers, instrumentation interfaces, and low-cost embedded products with modest processing requirements. A design team may select this microcontroller when the required firmware fits within 8 KB of Flash, working memory remains within 1 KB, and a compact 32-LQFP surface-mount footprint is preferred over a larger through-hole package. The principal design consideration is verification of the complete electrical and pin configuration before schematic capture. The available sources confirm the core voltage, temperature, memory, clock, and package data, but they do not provide a complete pin table, absolute-maximum ratings, timing characteristics, or detailed peripheral specifications. Those values must be obtained from the authoritative MC9S08RD8CFJ documentation before PCB release or production use. This product record consolidates the verified distributor specifications for the MC9S08RD8CFJ and separates confirmed characteristics from unavailable technical data. It also documents current sourcing links, package characteristics, procurement limitations, and design-validation requirements so engineers can assess fit before committing the part to an embedded-control platform.

詢價 聯絡我們
MC9S08RD8DWE - 8-Bit 8MHz 8KB Flash MCU | NXP
MC9S08RD8DWE

MC9S08RD8DWE - 8-Bit 8MHz 8KB Flash MCU | NXP

The NXP MC9S08RD8DWE is an 8-bit S08 microcontroller operating at 8 MHz with 8 KB of Flash memory in a 28-pin SOIC package. Verified distributor listings identify it as an S08 microcontroller IC with an 8-bit architecture, 8 MHz clock, and 8 KB Flash memory. The device is positioned for embedded control, peripheral interfacing, and compact commercial systems where a deterministic 8-bit core and modest program-memory capacity are sufficient. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and input/output functions into one package. The S08 family belongs to the broader 8-bit microcontroller hierarchy and is intended for cost-sensitive embedded designs. MC9S08RD8DWE combines that controller role with 8 KB of Flash storage in a 28-SOIC package, making it suitable for small control loops, sensor conditioning, actuator control, and communication-interface applications. The principal verified characteristics are the 8-bit architecture, 8 MHz operating frequency, and 8 KB Flash memory. The verified distributor description identifies the package as 28-SOIC, while another distributor result identifies the device as an S08 peripheral microcontroller and lists its package as SOP with gull-wing terminals. Additional electrical details such as supply voltage, RAM size, I/O count, timer resources, communication peripherals, temperature range, and memory map were not supplied in the verified data and must be confirmed from the manufacturer documentation before design release. The MC9S08RD8DWE is appropriate for embedded products where the firmware footprint is modest and an 8-bit CPU is adequate. Typical design uses include industrial control modules, low-cost sensor nodes, simple motor or relay controllers, instrument front ends, and peripheral-control boards. The SOIC package supports conventional surface-mount assembly and is useful when a product requires through-board test access or compatibility with established PCB footprints. Design work should begin by verifying the exact pinout, power requirements, reset behavior, clock configuration, peripheral multiplexing, and programming interface in the manufacturer datasheet. Because the supplied web evidence confirms only the device family, frequency, Flash capacity, and package, engineers should not infer unlisted electrical limits or peripheral availability. Firmware migration also requires checking memory compatibility, vector-table behavior, and toolchain support. This product record combines verified distributor identity and package information with an explicit separation between confirmed facts and unavailable specifications. It is intended to help engineers identify the correct MCU, locate source documentation, and plan validation, while avoiding unsupported assumptions about timing, power, compliance, or lifecycle status.

詢價 聯絡我們
MC9S08RD8PE - 8MHz 8KB Flash 8-Bit MCU | NXP
MC9S08RD8PE

MC9S08RD8PE - 8MHz 8KB Flash 8-Bit MCU | NXP

The NXP Semiconductors MC9S08RD8PE is an 8-bit HCS08 microcontroller operating up to 8 MHz with 8 KB (8K x 8) flash program memory, 1 KB (1K x 8) RAM, and 23 I/O pins in a 28-pin DIP package. It is supplied in a tube and is based on NXP's S08 microcontroller family, combining a compact embedded-control architecture with internal clocking and low-power operating features. A microcontroller is a programmable integrated circuit containing a processor core, memory, and peripheral functions on one semiconductor die. The MC9S08RD8PE belongs to the MCU hierarchy: embedded controller, 8-bit microcontroller, S08-family device, and embedded processing semiconductor. It is intended for applications that require modest computation, deterministic peripheral control, and economical integration without a high-pin-count surface-mount package. Key device characteristics include 8 KB of flash program memory for firmware storage, 1 KB of RAM for working data, 23 I/O pins for external interfaces, and a maximum stated speed of 8 MHz. The oscillator type is internal, reducing the number of required external clock components in straightforward designs. Multiple power-management modes and low-power technology support energy-conscious operation in portable products and handheld instruments. The HCS08 CPU core provides the basic execution environment for embedded control firmware. Flash memory permits in-system firmware storage, while the 1 KB RAM accommodates variables, stacks, and short-term application data. The 23 available I/O pins allow the device to connect sensors, switches, indicators, actuators, communication devices, and human-interface components. Exact peripheral assignments, interrupt behavior, and electrical limits must be confirmed against the manufacturer datasheet before layout or firmware is finalized. Typical applications include universal remote controls, handheld instruments, and portable consumer devices. The same general architecture can suit simple appliance controls, battery-operated products, sensor nodes, and compact industrial interfaces when the application can operate with an 8-bit core, 8 KB of program memory, and 1 KB of RAM. These uses benefit from the low component count and straightforward embedded programming model. Designers should confirm the exact 28-DIP pin assignments, power requirements, clock configuration, and programming interface in the manufacturer datasheet. A 28-pin through-hole package is useful for prototypes, educational systems, and low-volume products, but it consumes more board area than a comparable surface-mount package. Production designs should also verify current sourcing, lifecycle commitments, and programming-tool support with NXP or an authorized distributor. This page consolidates the verified distributor specifications, package information, sourcing details, selection guidance, and practical integration considerations for the MC9S08RD8PE. It also distinguishes verified facts from specifications that still require confirmation from the official datasheet, helping engineers avoid unsupported assumptions during design-in and procurement.

詢價 聯絡我們
MC9S08RE16CFDER - 8-bit HCS08 MCU 16KB Flash 48-QFN | NXP
MC9S08RE16CFDER

MC9S08RE16CFDER - 8-bit HCS08 MCU 16KB Flash 48-QFN | NXP

The NXP MC9S08RE16CFDER is an 8-bit HCS08 microcontroller with 16KB of Flash program memory and 1KB of RAM, housed in a 48-pin QFN-EP (7x7) package with an exposed thermal pad. It operates at up to 8MHz internal bus clock across a 1.8V to 3.6V supply range and offers 39 general-purpose I/O lines, supporting a wide variety of low-power peripheral applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripherals such as timers, ADCs, and serial interfaces. The HCS08 architecture belongs to the broader family of Freescale/NXP S08 microcontrollers, which evolved from the legacy HC08 and HC05 cores; it sits within the category hierarchy of 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. The S08R sub-family specifically targets ultra-low-power applications with multiple power management modes (run, wait, stop) that allow designers to optimize battery life in portable products. Key specifications verified for the MC9S08RE16CFDER include: 16KB (16K x 8) Flash program memory, 1KB (1K x 8) RAM, 39 I/O pins, internal oscillator with 8MHz maximum bus frequency, and a 48-QFN-EP (7x7) thermally-enhanced package. The part supports an operating voltage range suitable for battery-powered designs and features an integrated ColdFire V1 / HCS08 processor core with on-chip peripherals including timers, ADC, and multiple serial communication modules per the S08R family datasheet. The HCS08 core delivers up to 20 MHz CPU throughput (achieved from the 8MHz bus via an internal multiplier on some family derivatives) while consuming low active and standby currents, making it suitable for handheld and battery-operated products. The internal oscillator eliminates the need for external crystal components in cost-sensitive designs, and the embedded Flash supports in-system programming through the background debug mode (BDM) interface. Typical applications include universal remote controls, handheld instruments, portable consumer devices, low-power sensor nodes, and small appliances. The combination of low power modes, internal oscillator, and 39 I/O makes the part a flexible platform for designers migrating from older HC05/HC08 designs to the more capable S08 core. When designing with the MC9S08RE16CFDER, ensure adequate PCB copper area on the exposed pad to keep junction temperature within safe limits, and follow the reference design decoupling scheme (typically 100 nF plus bulk) on VDD pins. Developers should confirm peripheral availability (ADC channels, UART count, timers) against the specific S08R family datasheet, since pin counts and peripheral selections vary across family members. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the NXP product page or in the standalone datasheet, including pinout guidance and same-package alternatives for second sourcing.

詢價 聯絡我們
MC9S08RE16CFG - 8-Bit 16KB Flash MCU | Motorola | 44-LQFP
MC9S08RE16CFG

MC9S08RE16CFG - 8-Bit 16KB Flash MCU | Motorola | 44-LQFP

The Motorola MC9S08RE16CFG is an 8-bit S08 CISC microcontroller operating at up to 8 MHz, with 16 KB of flash program memory and a 44-pin LQFP package measuring 10 x 10 mm. The device supports 2.5 V and 3.3 V operation and is designed for industrial embedded-control applications requiring compact flash-based program storage. A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripheral interfaces on one semiconductor device. The S08 architecture belongs to the embedded microcontroller hierarchy used for motor control, measurement, appliance control, and other dedicated automation functions. Compared with a general-purpose computer processor, this device dedicates hardware to embedded tasks such as control sequencing, digital and analog I/O, timers, communication, and low-power operation. The MC9S08RE16CFG combines an 8 MHz S08 processor core with 16 KB of flash memory in a surface-mount 44-LQFP package. Its key engineering benefits include deterministic 8-bit execution, integrated embedded control resources, and a compact 10 x 10 mm footprint. The 2.5 V and 3.3 V operating choices provide compatibility with conventional industrial logic levels while reducing board area in control-oriented products. The part belongs to the MC9S08RE family, whose flash-memory organization supports firmware storage and application development. Flash programming is preferable to mask-programmable ROM when firmware revisions or field updates are required. Designers should account for programming voltage, reset behavior, clock configuration, and the allocation of pin multiplexing when planning the PCB and firmware. Typical applications include industrial sensor interfaces, motor and actuator controllers, appliance control panels, building equipment, and compact embedded measurement systems. Its 8 MHz performance is appropriate for event handling, sequencing, communication protocols, and supervisory control. The 44-pin LQFP package also provides enough external connections for sensors, displays, communication transceivers, and discrete power-control stages in a compact assembly. A critical design consideration is pin multiplexing: several functions may share the same package terminal, so the programmer must not reserve conflicting peripherals. Place decoupling capacitors close to the supply pins, follow the datasheet guidance for external clock and programming connections, and confirm that exposed routing requirements remain compatible with the board outline. This page combines the core MC9S08RE16CFG specifications, verified sourcing information, same-family drop-in options, and practical guidance for PCB layout, firmware integration, peripheral allocation, and component selection. These engineering details help shorten evaluation time while keeping the final design aligned with the device's flash capacity, clock rate, voltage range, and package constraints.

詢價 聯絡我們
MC9S08RE16CFJ - 8-Bit 16KB Flash MCU | Motorola
MC9S08RE16CFJ

MC9S08RE16CFJ - 8-Bit 16KB Flash MCU | Motorola

The Motorola MC9S08RE16CFJ is an 8-bit S08/HC08 microcontroller with an 8 MHz operating frequency, 16 KB of programmable flash memory, and a 32-LQFP 7 x 7 mm package. It combines a compact general-purpose MCU architecture with embedded flash and an industrial temperature option, making it suitable for control-oriented embedded systems that require deterministic operation, modest memory capacity, and a manageable surface-mount footprint. A microcontroller is a semiconductor device that integrates a processor core, memory, and peripheral functions into one component. Within the device hierarchy, this MCU belongs to the S08 family of 8-bit embedded processors and serves as the central control element in systems such as industrial controllers, appliance controls, sensor interfaces, and compact automation modules. Its 16 KB flash capacity provides room for program code, while the 32-LQFP package exposes the required I/O and supply connections through a standardized leaded footprint. The MC9S08RE16CFJ is identified as an industrial-grade part and operates from an 8 MHz maximum clock in the listed configuration. Its 16 KB flash organization is presented as 16K x 8, indicating byte-addressable nonvolatile program storage. The 32-LQFP package measures 7 x 7 mm and supports compact PCB placement while retaining individually accessible leads for inspection, rework, and prototype assembly. The S08/HC08 processor architecture is intended for embedded control rather than high-performance computing. Its 8-bit instruction-oriented design is well matched to sequential logic, digital I/O control, timers, counters, communications interfaces, and other tasks that do not require a high-bandwidth processor. This architecture can simplify firmware architecture and reduce system complexity in dedicated control products. Typical uses include small industrial controllers, appliance and equipment interfaces, building-control modules, sensor nodes, and compact embedded control boards. In these systems, the 8 MHz processing rate supports responsive control loops, while 16 KB of flash accommodates application firmware and configuration routines. The package size also helps reduce PCB area compared with larger leaded microcontroller packages. Designers should verify the complete pin assignment, reset behavior, clock options, memory map, and peripheral availability in the Motorola MC9S08RE16 datasheet before layout or firmware development. The 7 x 7 mm LQFP geometry requires adequate courtyard clearance and carefully controlled solder-paste deposition. Component orientation, pin-one location, and exposed lead or thermal-pad requirements must follow the package drawing rather than a generic 32-pin footprint. This product page combines the verified package, memory, frequency, architecture, and temperature-grade information with practical application guidance, sourcing pathways, and a strict pin-compatible replacement assessment. It also distinguishes true drop-in alternatives from parts that merely belong to the same S08 family but use a different package or require different firmware and board-level validation.

詢價 聯絡我們
MC9S08RE16FG - 8-Bit 16KB Flash MCU | NXP | 44-LQFP
MC9S08RE16FG

MC9S08RE16FG - 8-Bit 16KB Flash MCU | NXP | 44-LQFP

NXP Semiconductors MC9S08RE16FG is an 8-bit S08 microcontroller with an 8 MHz operating frequency, 16 KB of built-in Flash program memory, 1 KB of RAM, a 1.8 V to 3.6 V operating-voltage range, and a 44-pin LQFP package measuring 10 mm by 10 mm. It is designed for compact embedded-control designs requiring nonvolatile program storage, modest RAM, and a low-voltage digital interface. An 8-bit microcontroller is a programmable semiconductor containing a processor core, memory, peripherals, and input/output circuitry on one integrated circuit. Within the embedded-device hierarchy, the MC9S08RE16FG belongs to the S08 family of microcontrollers and sits below the broader categories of embedded processors and semiconductor control devices. Its 8-bit architecture is suited to monitoring digital inputs, controlling discrete outputs, communicating through serial peripherals, and coordinating compact sensor or actuator modules. The principal device characteristics visible for this part include 16 KB of built-in Flash memory, 1 KB of RAM, an 8 MHz maximum clock, and operation from 1.8 V to 3.6 V. The commercial-grade ordering information identifies a 0 °C to 70 °C ambient-temperature range for MC9S08RE16FG. These specifications make the device appropriate for consumer appliances, industrial control modules, instrumentation, and embedded systems where a low-voltage controller can handle logic-level sensors and actuators. The S08 architecture provides a compact platform for embedded control rather than a high-performance computing solution. Flash memory retains programmed code when power is removed, while the 1 KB RAM supports working variables, stack operations, buffers, and peripheral data handling. An 8 MHz operating frequency provides a defined timing basis for deterministic control tasks, although final performance depends on the selected peripherals, code organization, interrupt structure, and external circuitry. Typical applications include digital thermometers, small environmental-monitoring nodes, appliance controllers, keypad interfaces, motor-control supervisory circuits, and compact industrial interface modules. The 1.8 V to 3.6 V supply range permits integration with low-voltage logic systems, while the 44-LQFP package provides enough pins for multiple digital interfaces and selected analog or control functions. Designers should verify the complete pin assignment, peripheral configuration, clock requirements, decoupling recommendations, and programming procedure in the MC9S08RE16 datasheet before layout release. Pay particular attention to the 10 mm by 10 mm footprint, exposed thermal and supply connections, available I/O voltage domains, and the startup behavior of any external crystal or timing components. This product record combines the verified ordering characteristics with practical guidance for component selection, PCB implementation, power planning, and system integration. It also distinguishes confirmed electrical and packaging facts from parameters that require direct confirmation from the manufacturer datasheet, helping engineers shorten component-evaluation and hardware bring-up cycles.

詢價 聯絡我們
MC9S08RE16FGE - 8-Bit 8MHz 16KB Flash MCU | NXP
MC9S08RE16FGE

MC9S08RE16FGE - 8-Bit 8MHz 16KB Flash MCU | NXP

The NXP Semiconductors MC9S08RE16FGE is an 8-bit HCS08 microcontroller operating at up to 8 MHz, with 16 KB of Flash program memory and a 44-LQFP 10 x 10 mm package. It is designed for embedded control applications requiring a compact processor, serial communications, pulse-width modulation, watchdog supervision, low-voltage detection, and power-on reset. The verified distributor listing identifies the device as an S08 microcontroller with 16 KB Flash memory and 44 pins. What is an 8-bit microcontroller? An 8-bit microcontroller is a semiconductor device containing a processor core, memory, and peripherals on one integrated circuit. The HCS08 MC9S08RE16FGE belongs to the broader microcontroller hierarchy, where its S08 core executes firmware and controls external hardware. Its 8-bit architecture is suited to embedded control rather than high-throughput computing, while its integrated peripherals reduce the number of external components required in a control board. Key verified specifications include an 8 MHz maximum operating frequency, 16 KB of Flash program memory, 8-bit processing, SCI connectivity, PWM, watchdog timer, low-voltage detection, power-on reset, and 39 I/O pins according to the product listing snippet. The supplied sources also identify the package as 44-LQFP, 10 x 10 mm. Detailed electrical limits, RAM specifications beyond the available 1K x 8 listing, and operating temperature data must be confirmed against the manufacturer datasheet before design release. The MC9S08RE16FGE can be used for industrial control modules, motor-control peripherals, instrumentation interfaces, appliance controllers, and compact embedded systems. Its SCI interface supports serial communication with sensors, hosts, or programming equipment, while PWM and general-purpose I/O support timing and actuator-control functions. The 44-LQFP package provides a practical footprint for through-hole-compatible assembly and automated manufacturing, but careful PCB layout is still required for power, ground, decoupling, and signal integrity. The obsolete lifecycle status means engineers should verify availability before starting a new production design. Existing equipment may still use this MCU, but future redesigns should compare current S08 alternatives, confirm firmware compatibility, and validate electrical and timing requirements rather than assuming that a different package or memory organization is interchangeable. This page consolidates verified distributor data, application guidance, packaging information, and engineering considerations for MC9S08RE16FGE. It does not invent missing electrical limits, pin names, pricing, or cross-references; unavailable details are explicitly marked for engineering verification.

詢價 聯絡我們
MC9S08RE16FJ - 8-Bit 8MHz 16KB Flash MCU | NXP
MC9S08RE16FJ

MC9S08RE16FJ - 8-Bit 8MHz 16KB Flash MCU | NXP

NXP Semiconductor MC9S08RE16FJ is an 8-bit S08 microcontroller operating at up to 8 MHz with 16 KB of embedded Flash memory in a 32-LQFP package measuring 7 x 7 mm. The device combines a compact 8-bit processing core with embedded program memory for cost-sensitive embedded control, and its 1.8 V to 3.6 V operating range supports low-voltage industrial, consumer, appliance, and instrumentation applications. A microcontroller is a programmable semiconductor integrating a CPU, memory, and peripherals on one device. The S08 architecture belongs to the broader embedded-controller hierarchy: 8-bit microcontroller, embedded processor, and programmable logic device. By executing firmware stored in its internal Flash memory, the MC9S08RE16FJ can read inputs, run control algorithms, and drive outputs without a separate external processor. Its compact package also reduces board area compared with larger general-purpose microcontrollers. The principal operating characteristics include an 8-bit architecture, an 8 MHz maximum clock, 16 KB of Flash program memory, and a 1.8 V to 3.6 V supply range. The 32-LQFP (7 x 7 mm) surface-mount package supports compact PCB layouts while providing external connections for power, clock, programming, reset, and peripheral functions. These characteristics make the device suitable for embedded controllers where deterministic control, modest memory requirements, and low system complexity are more important than high computational throughput. The S08 RE family is positioned for general embedded control rather than high-performance or highly connected applications. Its 8-bit processing model can handle motor and relay sequencing, key scanning, sensor conditioning, simple communications, and autonomous product logic. The 16 KB Flash capacity provides room for application firmware, while the S08 instruction set and peripheral integration help minimize external logic. Designers should confirm the complete peripheral list, RAM capacity, clocking options, and programming requirements in the manufacturer datasheet before finalizing a design. Typical uses include appliance controllers, compact sensor modules, industrial control panels, building equipment, battery-operated products, and small automation controllers. In these systems, the microcontroller can consolidate several discrete functions into one firmware-driven device. For example, it can acquire sensor information, apply threshold logic, manage operator inputs, and control actuators while occupying only a small portion of a densely populated board. The primary design consideration is matching the controller's electrical limits and pin functions to the intended system. Use the package drawing and pin-description table in the manufacturer datasheet when assigning tracks and programming connectors. Decoupling, programming-header access, clock stability, reset handling, and exposed-pad or thermal-layout requirements should be reviewed before schematic release. Firmware development also depends on the correct S08 programming method and toolchain for the production workflow. This page organizes the documented MC9S08RE16FJ specifications, sourcing information, comparison fields, and practical design guidance. It also distinguishes verified drop-in replacements from broader S08 devices, helping engineers make a replacement decision without assuming that a similar memory size or architecture guarantees PCB compatibility.

詢價 聯絡我們
MC9S08RE16FJE - 8-Bit 8 MHz 16 KB MCU | NXP
MC9S08RE16FJE

MC9S08RE16FJE - 8-Bit 8 MHz 16 KB MCU | NXP

The NXP Semiconductors MC9S08RE16FJE is an 8-bit S08R-series microcontroller with an 8 MHz maximum clock, 16 KB flash memory, and a 32-LQFP 7 x 7 mm package. It belongs to the HCS08 embedded-microcontroller family and provides a compact platform for cost-sensitive embedded control, industrial equipment, consumer products, and legacy system upgrades. The supplied distributor data identifies the device as a lead-free and lead-bromide-free 16 KB flash MCU in the 32-LQFP package. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and input/output functions into one component. In the broader hierarchy, MC9S08RE16FJE is an MCU, an embedded controller, a programmable logic device, and a semiconductor. Its S08 architecture supports applications requiring low-cost deterministic control, while flash memory allows firmware to be programmed or updated without external program-memory devices. The verified product information confirms an 8-bit processor core, 8 MHz maximum frequency, and 16 KB organized as 16K x 8 flash. The 32-LQFP package exposes the device in a surface-mount format suitable for conventional PCB assembly. Because the supplied material does not include RAM size, I/O count, voltage range, timer resources, ADC specifications, or package dimensions beyond the stated 7 x 7 mm format, those values must be checked against the manufacturer datasheet before final design release. The S08R family is positioned as an upgrade path from Motorola 68HC05 and 68HC08 architectures. This makes MC9S08RE16FJE relevant for legacy-controller migrations where the replacement must preserve an established control architecture while increasing processing performance or peripheral capability. Firmware compatibility is not guaranteed merely because the application is similar; designers should verify startup behavior, memory organization, peripheral mapping, interrupt vectors, and package-level pin assignments. Typical design uses include small motor controllers, sensor nodes, building controls, appliance controllers, keypad interfaces, LED systems, instrumentation, and embedded industrial modules. The 8 MHz clock and 16 KB flash footprint are most appropriate for compact control tasks where code size and deterministic peripheral access matter more than high-end processing performance. Before purchasing or laying out a replacement board, confirm the exact pinout, electrical limits, clock requirements, reset behavior, and programming interface from the official NXP documentation. For obsolete or unavailable assemblies, use a controlled cross-reference process and validate any substitute with hardware and firmware tests rather than relying on a similar MPN alone. This page combines verified distributor observations, lifecycle information, and design cautions without inventing missing electrical data.

詢價 聯絡我們
MC9S08RE32CFJ - 8-Bit 8MHz 32KB Flash MCU | NXP
MC9S08RE32CFJ

MC9S08RE32CFJ - 8-Bit 8MHz 32KB Flash MCU | NXP

NXP Semiconductors MC9S08RE32CFJ is an 8-bit HCS08 S08 flash microcontroller rated at 8 MHz, with 32 KB of flash memory and a 32-LQFP 7 x 7 mm package. The verified listing also identifies 2 KB of SRAM and a 32-terminal surface-mount package. It is intended for compact embedded-control designs requiring an economical MCU, embedded nonvolatile program memory, and a conventional parallel-pin package. An HCS08 S08 microcontroller is an embedded microcontroller within the broader 8-bit microprocessor family. It combines a CPU core, flash program memory, SRAM, peripherals, and general-purpose I/O in one integrated circuit. Compared with field-programmable gate arrays, an MCU executes control firmware directly, reducing board complexity for motor, sensor, appliance, and industrial-control tasks. Its 32 KB flash capacity provides room for application code and fixed data, while the 2 KB SRAM supports working variables and stack operations. The MC9S08RE32CFJ's principal verified characteristics are its 8-bit architecture, 8 MHz operating frequency, 32 KB flash, 2 KB RAM, and 32-LQFP 7 x 7 mm package. A second distributor snippet reports a 16 MHz clock-related attribute and 32,768 ROM words, while the primary DigiKey description identifies 8 MHz. Because these snippets differ on the clock field, designs should verify the exact bus-clock interpretation and maximum operating frequency against the MC9S08RE32 datasheet before release. The 32-LQFP package provides a practical upgrade path over smaller packages while retaining a leaded, visually inspectable surface-mount format. The verified data establishes surface mounting and a 7 x 7 mm body, but pin names, peripheral assignments, electrical limits, and exposed thermal-pad details are unavailable in the supplied snippets. Firmware migration also requires validation because a nominal memory-and-package match does not establish instruction-set, peripheral, timing, or toolchain equivalence. Typical uses include small sensor controllers, appliance interfaces, compact motor-control boards, keypad and display modules, and industrial sub-systems that need deterministic embedded logic. An 8-bit MCU is most appropriate when computation is modest, update simplicity matters, and total system cost is more important than high arithmetic throughput or a large RAM workspace. Designers should confirm the complete pinout, power rails, I/O limits, reset requirements, clock configuration, memory map, and programming interface from the manufacturer datasheet. Prototype purchases should also verify authenticity, because legacy S08 inventory can include original, surplus, or independently sourced parts with different traceability. This page combines verified distributor specifications, lifecycle and sourcing cautions, cross-reference availability, and practical design guidance that are not consolidated in a single manufacturer summary. It also distinguishes confirmed 32-LQFP options from larger 44-LQFP variants that cannot be treated as pin-compatible drop-ins.

詢價 聯絡我們
MC9S08RE60CFG - 8-Bit 8MHz 60KB MCU | NXP Semiconductors
MC9S08RE60CFG

MC9S08RE60CFG - 8-Bit 8MHz 60KB MCU | NXP Semiconductors

The NXP Semiconductors MC9S08RE60CFG is an 8-bit S08 microcontroller operating at 8 MHz, with 60 KB of Flash program memory and a 44-pin LQFP package measuring 10 mm by 10 mm. The device is identified as an industrial-temperature component and uses a square gull-wing package configuration, making it suitable for embedded control systems that require deterministic 8-bit processing and a compact surface-mount footprint. A microcontroller is a semiconductor integrated circuit that integrates a processor core, program memory, data memory, and peripheral interfaces into one device. The S08 family belongs to the 8-bit embedded-controller category, where software-driven state machines, communication routines, and control algorithms are executed from embedded Flash memory. This makes the MC9S08RE60CFG appropriate for industrial equipment, access controls, measurement instruments, and compact embedded controllers where a low-pin-count architecture and straightforward firmware model are valuable. The principal documented characteristics are an 8-bit processor architecture, an 8 MHz operating frequency, and 60 KB of Flash memory. The 44-terminal LQFP package provides a conventional surface-mount assembly format with gull-wing leads, while the 10 mm by 10 mm body size supports medium-density control boards. The industrial temperature classification makes the component relevant to equipment expected to operate across an industrial temperature environment, subject to the detailed operating limits in the manufacturer datasheet. Because this MCU belongs to the S08 platform, its architecture is intended for embedded rather than high-performance computing. An 8 MHz execution rate and 8-bit data path support responsive control of sensors, switches, communications, and actuators without requiring a complex external processor. The 60 KB Flash allocation provides room for application code, configuration tables, bootloader routines, and lookup data in a single integrated program-memory device. Typical applications include industrial sensor interfaces, building and access-control equipment, compact instrumentation, appliance controllers, and communication modules. The device can serve as the central controller in a design that reads inputs, executes embedded control logic, drives outputs, and coordinates serial or peripheral functions. Selection should focus on the complete S08 peripheral configuration, required memory capacity, package footprint, and qualification requirements rather than clock speed alone. PCB design should follow the manufacturer pin-description table and recommended decoupling layout exactly. Place the required supply bypass capacitors close to the device power pins, route sensitive inputs away from fast-switching nodes, and preserve adequate copper around the 44 LQFP leads for reliable assembly. Firmware selection also requires checking the supported programming and debug interface before committing the MCU to a new board revision. This page consolidates the documented device identity, package information, sourcing paths, replacement analysis, and practical engineering guidance into a compact engineering reference. It also distinguishes a verified same-package family alternative from package mismatches and functional substitutes that would require different PCB land patterns.

詢價 聯絡我們