MC9S08RD60PE 8-Bit 8MHz 60KB Flash 28-PDIP MCU
MPN： MC9S08RD60PE ✗ 停產MC9S08RD60PE 概覽
A microcontroller is a semiconductor device that combines a processor core, memory, peripheral interfaces, and control logic into one integrated component. The MC9S08RD60PE belongs to the S08 8-bit microcontroller family and provides a dedicated embedded platform for sensing, control, communication, and actuator functions. Its integrated flash memory allows firmware and application code to be stored directly on the device.
The principal specifications identify an 8-bit architecture, 8 MHz clocking, and 60 KB of flash organized as 60K by 8 bits. The 28-PDIP mechanical package is suitable for through-hole PCB assembly, prototyping, education, and legacy industrial equipment where a leaded package is preferred. The operating range of 1.8 V to 3.6 V supports low-voltage embedded systems, while the stated temperature range targets commercial-temperature applications.
Typical uses include motor and relay control, industrial instrumentation, appliance controllers, battery-powered equipment, and embedded educational projects. The 8-bit processing architecture is appropriate for straightforward control loops, digital I/O expansion, status monitoring, and low-bandwidth peripheral communication. The 60 KB flash capacity provides space for application firmware, configuration tables, calibration constants, and communication routines.
Designers should confirm the complete electrical limits, peripheral allocation, clock configuration, programming method, and pin multiplexing against the manufacturer datasheet before releasing a PCB. Because the PDIP package exposes through-hole leads, layout planning should include the device footprint, programming connector, decoupling strategy, and any external crystals, oscillators, or interface components.
This product page consolidates the verified device identity, package, memory, clock, voltage, temperature, sourcing information, and engineering guidance for designers evaluating the MC9S08RD60PE in embedded control systems.
直接替換替代品，適用於 MC9S08RD60PE — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品MC9S08RD60PE 最大額定值與電氣特性
| Product Type | 8-bit S08 microcontroller |
| Manufacturer | NXP Semiconductors |
| 最大時脈頻率 | 8 MHz |
| Flash Memory | 60 KB (60K x 8 bits) |
| Architecture | 8-bit |
| Operating Voltage | 1.8 V to 3.6 V |
| 工作溫度 | 0 °C to 70 °C |
| 封裝 | 28-PDIP |
| 安裝類型 | Through-hole |
| Program Memory Type | Built-in flash |
| Program Memory Organization | 60K x 8 bits |
| 腳位數 | 28 pins |
| Lead-Free Status | Lead-free |
| RoHS 狀態 | Compliant |
MC9S08RD60PE 28-pdip 腳位配置指南
MC9S08RD60PE（28-pdip 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： MC9S08RD60PE.
請參閱 資料表 以查看完整腳位配置。
典型應用
MC9S08RD60PE 適用於 7 應用s: Industrial Monitoring and Control, Appliance and Household Controller, Battery-Powered Embedded Device, Educational Microcontroller Platform, Motor and Relay Sequencer, Instrumentation Data Acquisition, Building Access and Security Control.
Industrial Monitoring and Control
The MC9S08RD60PE fits industrial monitoring and control panels that require an 8-bit controller, 60 KB of program storage, and operation from a 1.8 V to 3.6 V supply. Its 8 MHz processing rate supports basic status scanning, operating-mode control, local HMI updates, and configurable logic. The 28-PDIP package simplifies through-hole assembly and repair in control boards that need a proven S08 software environment.
推薦
Appliance and Household Controller
The MC9S08RD60PE is appropriate for appliance controllers that coordinate operating modes, user inputs, sensors, displays, and actuator outputs. Its 60 KB flash provides storage for control state machines, calibration data, and product-specific behavior, while the 1.8 V to 3.6 V range supports compact low-voltage electronics. The 8-bit S08 platform is especially practical for cost-sensitive designs using established appliance-control firmware.
推薦
Battery-Powered Embedded Device
The MC9S08RD60PE can serve as the control processor in a low-voltage battery-powered device that periodically wakes, reads sensors, updates a local display, and controls an actuator. Its 1.8 V to 3.6 V operating range is compatible with low-energy system rails, and 60 KB of flash can hold compact application firmware. Power consumption should be evaluated using the processor’s active and low-power modes in the datasheet.
推薦
Educational Microcontroller Platform
The MC9S08RD60PE supports educational projects involving 8-bit microcontroller programming, digital logic, sensors, timing, and embedded control. Its 60 KB flash provides enough storage for classroom firmware, while the 28-PDIP package is straightforward to mount on perforated boards and solder by hand. The established S08 architecture also helps learners focus on instruction behavior, memory organization, and peripheral configuration.
推薦
Motor and Relay Sequencer
The MC9S08RD60PE can implement deterministic motor, solenoid, or relay sequencing where the application does not require a high-performance real-time processor. The 8 MHz 8-bit architecture and 60 KB flash support event tables, timing routines, interlocks, and diagnostic logging. Suitable external drivers, protection networks, and isolation must be added according to the load and safety requirements.
推薦
Instrumentation Data Acquisition
The MC9S08RD60PE is suitable for compact instrumentation that acquires sensor data, applies calibration, formats measurements, and reports results over a simple communications interface. Its 60 KB flash can retain configuration and calibration tables, and the 8 MHz clock supports moderate control-loop rates. Analog front-end components and communication transceivers should be selected separately to match the required accuracy and bus standard.
推薦
Building Access and Security Control
The MC9S08RD60PE can coordinate keypad inputs, lock or relay outputs, status indicators, and event logging in a building-access controller. The integrated flash provides room for firmware and configuration, while the 28-PDIP package supports through-hole product construction. Deployment requires appropriate consideration of relay drivers, fail-safe behavior, communication security, and environmental protection.
推薦
推薦產品摘要
工程參考資料，適用於 MC9S08RD60PE — 比較、設計指引及合規資訊。
選型指南
Choose a different MCU when the design needs more RAM, faster processing, additional peripherals, a different package, a wider temperature range, or a current long-term supply commitment. Do not treat a nominally similar 8-bit part as drop-in compatible without checking the pinout, memory map, clock architecture, peripheral mapping, programming system, and supply limits. No confirmed drop-in alternatives were established, so a redesign or firmware migration should be evaluated explicitly rather than assumed to be a simple substitution.
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | NXP Semiconductors |
| Package | 28-PDIP |
| Architecture | 8-bit S08 |
| Maximum Clock Frequency | 8 MHz |
| Flash Memory | 60 KB (60K x 8 bits) |
| Operating Voltage | 1.8 V to 3.6 V |
| Operating Temperature | 0 °C to 70 °C |
| Program Memory Type | Built-in flash |
| Mounting Type | Through-hole |
主要差異化特點
- Integrated flash in a through-hole S08 package (對比Generic 8-bit MCU without the confirmed S08 pin and software compatibility)
- Defined low-voltage operating range (對比Generic 5 V-only entry-level microcontroller)
- Defined commercial-temperature operation (對比Consumer-temperature MCU with narrower environmental limits)
設計說明
Use the manufacturer 28-PDIP land pattern and verify the lead spacing, row spacing, and drill diameter against the package drawing. Keep the through-hole footprint accessible for assembly and repair, and check component clearance around the programmer connector. The footprint must not be copied from another DIP device without dimensional comparison.
Design the supply rail for the specified 1.8 V to 3.6 V operating range and review the datasheet’s absolute maximum and voltage-timing limits. Place required bypass capacitors at the power and ground pins using the layout guidance in the datasheet, and keep switching-converter or relay-transient current paths away from sensitive signal routing.
Assign every package position from the official pin-description table, including reset, clock, programming, and no-connect pins. Route programming signals so the programming connector or test pads remain accessible, and route oscillator-related copper only as directed by the manufacturer’s recommended layout. Review unused pins rather than assuming every exposed position is a general-purpose I/O.
Do not substitute a generic 8-bit MCU based only on clock speed and flash capacity. Check the S08 instruction set, memory map, interrupt behavior, peripheral assignments, startup files, programming toolchain, and package pinout. A family member with similar headline specifications can still require firmware, board, or adapter changes.
合規資訊
The verified product listing identifies the MC9S08RD60PE as lead-free and RoHS compliant. REACH, halogen-free, and conflict-minerals status are not established by the available product information.
