產品(42,000+)

MPXN2020VMG116 - 116MHz 32-Bit 2MB MCU | NXP | Gateway
MPXN2020VMG116

MPXN2020VMG116 - 116MHz 32-Bit 2MB MCU | NXP | Gateway

The NXP Semiconductors MPXN2020VMG116 is a 32-bit e200z650 Power Architecture microcontroller operating at 116 MHz, with 2 MB of flash memory and a 208-pin MAPBGA package measuring 17 x 17 mm. It is positioned for industrial embedded control applications requiring substantial embedded flash, a high pin count, and integrated gateway-oriented connectivity capabilities. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, data memory, and peripherals into one component. The e200z650 core places MPXN2020VMG116 in the 32-bit embedded microcontroller hierarchy, where deterministic control and extensive software support are more important than the energy profile of a low-power microcontroller. Its 208-ball package supports dense mixed-signal and communication-oriented board layouts. The verified product data identifies a 116 MHz operating frequency, 2 MB flash organized as 2M x 8, and an industrial temperature grade. One distributor also lists 592 KB of memory, but the supplied data does not explain whether that figure represents RAM, another memory resource, or a device variant. Consequently, the value is reported separately and should be confirmed against the manufacturer documentation before design allocation. MPXN2020VMG116 is suitable for industrial gateways, networked embedded controllers, communications equipment, and compact control platforms that benefit from a 116 MHz embedded processor and 2 MB program-memory footprint. Its large MAPBGA package requires multilayer PCB design, careful escape routing, and assembly-process qualification, making it better suited to sophisticated equipment than simple low-cost prototypes. Engineers should confirm all pin multiplexing, power rails, clock requirements, memory interfaces, and ball assignments from the official NXP datasheet before schematic capture. Because no manufacturer datasheet URL or complete pinout was supplied in the verified data, this page does not infer electrical limits, peripheral assignments, or package-ball functions. Procurement users should also confirm current lifecycle and stock status directly with the manufacturer or an authorized distributor. This page consolidates verified distributor specifications, package data, sourcing information, and practical selection guidance. It separates confirmed facts from unavailable parameters, helping engineers assess the MPXN2020VMG116 for gateway and industrial embedded designs without relying on unverified electrical assumptions.

詢價 聯絡我們
MPXN2120VMG116 - 32-bit 116MHz MCU 2MB Flash | NXP
MPXN2120VMG116

MPXN2120VMG116 - 32-bit 116MHz MCU 2MB Flash | NXP

The NXP Semiconductors MPXN2120VMG116 is a 32-bit e200z650 microcontroller rated at 116 MHz, with 2 MB of flash program memory and 155 I/O in a 208-MAPBGA package measuring 17 mm by 17 mm. It belongs to the NXP PX Series and targets embedded gateway and networking designs requiring integrated communications, real-time control, and substantial onboard program storage. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O on one device. Within the embedded-computing hierarchy, this part is a 32-bit MCU, a semiconductor used to execute firmware, acquire inputs, control outputs, and manage communication interfaces. Its e200z650 core provides the processing platform while the PX Series integration reduces the number of external devices required in a gateway controller. The verified product data identifies 2 MB (2M x 8) flash memory, a 116 MHz operating frequency, 155 I/O, and a 208-MAPBGA package. Connectivity listed in the available source data includes CANbus, I²C, LINbus, SCI, SPI, and UART/USART. The listed peripherals include DMA, power-on reset, PWM, and watchdog timer. These interfaces make the device applicable to connected industrial equipment, transport systems, and network-edge controllers where multiple serial buses and deterministic peripheral handling are useful. The MPXN2120VMG116 is reported as obsolete by one data result, although distributor listings also identify NXP and Rochester Electronics inventory records. Lifecycle and sourcing should therefore be confirmed for the exact production quantity. The 208-ball package also demands careful PCB layout and assembly planning because its fine routing density increases assembly complexity compared with leaded or lower-ball-count packages. For new designs, engineers should evaluate current NXP product options rather than assuming an obsolete gateway MCU is suitable for a long production run. When maintaining an existing MPXN2120VMG116 design, validate the exact package, pin mapping, power architecture, clock configuration, memory map, and firmware against the relevant NXP documentation before assembly or repair. This page consolidates the verified distributor specifications, lifecycle information, package details, interface list, sourcing links, and design considerations for this obsolete PX Series microcontroller. It does not infer undocumented electrical ratings, pin names, or replacement parts.

詢價 聯絡我們
MPXR4040VVU264 - 264MHz 32-bit MCU with 4MB Flash | NXP
MPXR4040VVU264

MPXR4040VVU264 - 264MHz 32-bit MCU with 4MB Flash | NXP

The NXP Semiconductors MPXR4040VVU264 is a 32-bit Power Architecture e200z7 microcontroller rated at 264 MHz, with 4 MB of flash program memory and 416-ball PBGA packaging. The verified product listing identifies 198 I/O, CANbus, LINbus, SCI, SPI, UART/USART, DMA, PWM, and watchdog connectivity. Its industrial temperature-grade marking and 27 x 27 mm package position it for real-time embedded control systems requiring high processing performance and extensive peripheral integration. A microcontroller is a programmable system-on-chip that combines a processor core, memory, communication peripherals, timers, and I/O in one device. The MPXR4040VVU264 belongs to the PX Series and uses a 32-bit e200z7 core built around Power Architecture technology. This places it in the embedded-controller hierarchy: MCU -> real-time processor -> embedded semiconductor. Its combination of local flash, serial interfaces, and real-time peripherals supports industrial networking, machine control, automotive-style communications, and test equipment without requiring a separate external processor. The verified data confirms a 264 MHz operating speed, 4 MB (4M x 8) flash, 32-bit processing, 198 I/O, and a 416-terminal square BGA package. The available connectivity includes CANbus, EBI/EMI, LINbus, SCI, SPI, UART/USART, DMA, POR, PWM, and WDT. These interfaces allow the device to coordinate networked nodes, external memories, actuator controls, and real-time data paths. The 198 available I/O provide substantial board-level integration for sensors, communication transceivers, power-control signals, and industrial logic. The e200z7 architecture and 264 MHz class position the part in performance-oriented real-time embedded designs rather than low-cost basic control. Flash memory supports local firmware storage, while DMA can reduce processor involvement in data transfers. PWM and watchdog resources support periodic actuator drive and system monitoring, and the communication peripherals cover common industrial and embedded control buses. The supplied data does not specify RAM capacity beyond a conflicting distributor snippet, operating voltage, memory-map details, or electrical timing limits. Typical applications include industrial automation controllers, CAN and LIN network nodes, motor and power-control systems, communications equipment, and embedded test or measurement platforms. Designers should prioritize the 416-ball PBGA layout and verify the exact pin-level requirements, power rails, clock configuration, and board-level escape routing before layout begins. Because the package uses 416 balls rather than a leaded package, a multilayer PCB and appropriate assembly process are normally required. The MPXR4040VVU264 is listed as obsolete by one datasheet source, so procurement should confirm lifecycle and counterfeit risk before committing to new production. LCSC shows a price from $1.0048 in the verified search result, while Heisener reports inventory but requests a quotation. These figures are commercial snapshots, not guaranteed XAIPART inventory or a universal replacement price. This page consolidates verified distributor specifications, interface details, lifecycle signals, sourcing context, and engineering caveats. It is intended to help engineers distinguish the obsolete controller from possible alternatives, assess compatibility, and plan a controlled redesign rather than assuming that any cross-reference is automatically pin-to-pin equivalent.

詢價 聯絡我們
MPXS2005VLQ80 - 32-bit 80MHz 512KB Flash MCU | NXP
MPXS2005VLQ80

MPXS2005VLQ80 - 32-bit 80MHz 512KB Flash MCU | NXP

The NXP Semiconductors MPXS2005VLQ80 is a 32-bit e200z4d Power Architecture microcontroller operating at 80 MHz, with 512 KB of flash memory in a 144-LQFP 20 x 20 mm package. The device supports 3.3 V and 5 V operation and is identified in the retrieved distributor data as an automotive-temperature-grade component. Its combination of a 32-bit core, 512 KB program memory, and a high-pin-count gull-wing package makes it suitable for embedded control, automotive electronics, industrial equipment, and communication-oriented systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface circuitry into one device. The MPXS2005VLQ80 belongs to the e200 family and uses the e200z4d core designation shown in the distributor records. The 80 MHz operating frequency provides the timing basis for control loops, protocol handling, and supervisory tasks, while the 512 KB flash capacity supports embedded application code and firmware. The available specification set confirms an e200z4d PX microcontroller, 32-bit architecture, 80 MHz operation, 512 KB organized as 512K x 8 flash, and a 144-LQFP package measuring 20 x 20 mm. The retrieved listings also identify the component as supporting 3.3 V and 5 V operation and as an automotive-temperature-grade device. Detailed electrical limits, peripheral inventories, memory maps, and timing characteristics were not included in the supplied evidence and therefore remain unstated here. The 144-pin LQFP footprint provides a substantial number of external connections for digital I/O and controller peripherals. LQFP, or Low-profile Quad Flat Package, is a surface-mount package family with gull-wing leads on all four sides. The package is larger than many compact embedded packages, but it provides a practical combination of pin access and board-space efficiency for designs requiring numerous external signals. Typical design uses include automotive body or chassis control modules, industrial automation controllers, communication gateways, sensor aggregation units, and embedded motor-control systems. The supplied evidence specifically supports automotive-temperature classification, while the broader application examples are application-fit descriptions rather than claims of manufacturer-listed designs. Designers should verify the complete electrical, timing, peripheral, and pin-level requirements against the official datasheet before schematic capture or PCB release. Because the verified data does not provide a manufacturer PDF URL, a complete pinout, maximum supply voltage, current consumption, or thermal limits, those items must not be inferred from the distributor summaries.

詢價 聯絡我們
MPXS2010VLQ120 - 120MHz e200z4 MCU, 1MB Flash | NXP
MPXS2010VLQ120

MPXS2010VLQ120 - 120MHz e200z4 MCU, 1MB Flash | NXP

The NXP Semiconductors MPXS2010VLQ120 is a 32-bit e200z4 core microcontroller operating at 120 MHz, with 1 MB of flash memory organized as 1M x 8 bits, in a 144-LQFP 20 x 20 mm package. It belongs to the PXS20 microcontroller family and is positioned for automotive and industrial embedded systems requiring deterministic real-time control, substantial on-chip flash, and a high pin count for external interfaces. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and interface logic. The e200z4 core combines instruction execution, interrupt control, and deterministic peripheral access within a single embedded device. The MPXS2010VLQ120 therefore functions as a semiconductor, specifically a 32-bit microcontroller within the broader embedded-control and industrial-automation hierarchy. The verified product data identifies a 120 MHz operating frequency, 1 MB flash configuration, e200z4 architecture, and 144-LQFP package. The high pin count provides more external connection options than a small leadless MCU, although the exact peripheral allocation and electrical limits require the manufacturer datasheet. The 20 x 20 mm gull-wing package is suitable for conventional surface-mount assembly and provides accessible leads for inspection and rework. Typical design uses include automotive body and chassis electronics, industrial controllers, motor-control platforms, communication equipment, and embedded gateways. The 120 MHz core supports computationally intensive control software, while 1 MB flash provides room for application code and configuration data. Designers should still verify memory-map compatibility, peripheral assignments, electrical ratings, and software migration requirements before selecting a substitute. For a robust design, follow the manufacturer reference manual and datasheet for clock, memory, pin-multiplexing, reset, and power-supply requirements. Validate the 3.3 V and 5 V references found in a distributor source against the exact device datasheet, since the supplied search data does not provide complete operating details or an official NXP datasheet URL. This page consolidates the verified distributor specifications, package information, sourcing references, and engineering limitations for MPXS2010VLQ120. It does not invent missing electrical specifications, and it separates confirmed facts from parameters requiring datasheet confirmation.

詢價 聯絡我們
MPXS2010VLQ80 - 32-Bit 80MHz 1MB MCU | NXP | Automotive
MPXS2010VLQ80

MPXS2010VLQ80 - 32-Bit 80MHz 1MB MCU | NXP | Automotive

The NXP Semiconductors MPXS2010VLQ80 is a 32-bit e200z4d Power Architecture microcontroller operating at 80 MHz, with 1 MB of flash memory and a 144-LQFP 20 x 20 mm package. The verified distributor data identifies the device as an automotive-temperature-grade MCU and describes a 3.3 V / 5 V operating class. It is suited to embedded automotive control, body electronics, actuator control, instrumentation, and communication-oriented systems where a 32-bit processor, local flash storage, and a high-pin-count package are required. What is a 32-bit microcontroller? A microcontroller is a semiconductor device integrating a processor core, program memory, data memory, peripherals, and interface logic on one integrated circuit. The e200z4d core belongs to the Power Architecture family and provides the computational base for real-time embedded control. In the broader hierarchy, MPXS2010VLQ80 is a microcontroller, embedded processor, semiconductor, and programmable control component. Its 1 MB flash capacity provides room for application code and configuration data, while the 80 MHz clock supports time-dependent control and communication tasks. The supplied data specifically identifies a 32-bit e200z4d core, 80 MHz operation, 1 MB flash organized as 1M x 8, 144 LQFP construction, and automotive temperature grade. The package is described as gull-wing, square, and 20 x 20 mm. These features make the MPN appropriate for larger control modules that need numerous external connections and a conventional fine-pitch surface-mount package. The available verified data does not state RAM size, peripheral inventory, supply-voltage limits, flash endurance, or detailed pin assignments; those values must be confirmed from the official manufacturer documentation before a new design is released. Typical automotive uses include motor and solenoid control, central body modules, sensor aggregation, actuator interfaces, power-window or seat systems, lighting control, and gateway or communications modules. The 144-pin LQFP gives the design access to many external signals compared with a small leadless package, making it convenient for systems requiring several sensors, drivers, communication lines, and discrete control outputs. The 3.3 V / 5 V designation also makes it relevant to mixed-voltage automotive electronics, but the exact rail tolerances and I/O levels require confirmation. For PCB implementation, use the exact NXP datasheet package drawing and pinout rather than relying on generic LQFP assumptions. Confirm exposed-pad or thermal requirements, recommended decoupling, oscillator connections, reset behavior, programming interface, and unused-pin treatment. The 1 MB flash and 80 MHz rating should not be treated as a complete performance guarantee because peripheral clocks and memory-wait behavior require the missing technical data. This product page combines verified distributor specifications, package information, lifecycle-relevant sourcing context, and engineering selection guidance. It intentionally identifies unavailable parameters instead of estimating them, helping engineers distinguish confirmed facts from information that still needs manufacturer-datasheet confirmation.

詢價 聯絡我們
MPXS2010VMM80 - 80MHz 1MB 32-Bit MCU | NXP
MPXS2010VMM80

MPXS2010VMM80 - 80MHz 1MB 32-Bit MCU | NXP

NXP Semiconductors MPXS2010VMM80 is a 32-bit e200z4d PX-series microcontroller operating at 80 MHz, with 1 MB (1M x 8) flash memory, in a 257-LFBGA package measuring 14 x 14 mm. The verified distributor information identifies this device as a PXS20-family MCU and lists the package as MAPBGA-257 or 257-LFBGA. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and interface logic. The PXS20 family belongs to the embedded-processing hierarchy of 32-bit MCU, embedded controller, real-time control, and industrial automation semiconductor devices. This MPXS2010VMM80 combines an e200 RISC architecture with flash-backed program storage for embedded control, communications, and safety-oriented industrial systems. The principal verified specifications are a 32-bit processing architecture, 80 MHz operating frequency, and 1 MB (1M x 8) flash memory. Distributor records also identify an automotive temperature grade, although the exact numeric operating-temperature limits and qualification status are not supplied in the verified data. The 257-ball package exposes the device's extensive external memory, communication, control, debug, and power connections. Typical automotive and industrial uses include powertrain-related control, electronic control units, body and chassis electronics, real-time communications, and safety subsystems. The 80 MHz processing rate supports deterministic embedded workloads, while the 1 MB flash capacity provides room for application code and configuration data. The PXS20 documentation references the PXS20 Microcontroller Reference Manual for functional characteristics and a Safety Application Guide for fail-safe system implementation under IEC 61508. The large BGA package makes PCB layout and thermal design more demanding than a leaded package. Designers should follow the manufacturer's pin assignment, escape-routing, decoupling, and soldering guidance, verify the exposed thermal and supply connections, and complete signal-integrity and power-integrity reviews before release. This page combines the verified distributor identity, package, frequency, memory, pricing, and availability information with application guidance and explicit sourcing boundaries. Missing electrical, pin-level, lifecycle, and qualification values remain marked for verification rather than being inferred from related PXS20 devices.

詢價 聯絡我們
MPXS3010VMM150 - PXS30 Dual-Core 150MHz MCU, 1MB Flash, 257-LFBGA | NXP
MPXS3010VMM150

MPXS3010VMM150 - PXS30 Dual-Core 150MHz MCU, 1MB Flash, 257-LFBGA | NXP

The NXP MPXS3010VMM150 is a 32-bit dual-core automotive microcontroller based on the e200z7d Power Architecture cores, operating at up to 150 MHz and packaged in a 257-ball LFBGA (14x14 mm). It integrates 1 MB of embedded flash and 256 KB of SRAM, targeting chassis, body, and safety microcontrollers in next-generation vehicle electrical architectures. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals including timers, ADCs, communication controllers, and GPIO. Within the broader semiconductor hierarchy, an MCU is a sub-category of microprocessors and embedded processors, itself a category of integrated circuits (ICs). The PXS30 family sits inside NXP's chassis and safety MCU portfolio, designed to deliver deterministic real-time performance for ASIL-rated applications. Key features of the MPXS3010VMM150 include dual e200z7d cores running up to 150 MHz, 1 MB of on-chip flash for application code, 256 KB of SRAM for data and stack operations, and an integrated peripheral set targeted at automotive networks (CAN, LIN, FlexRay) and motor-control PWM. The 257-LFBGA package provides a compact 14x14 mm footprint while exposing the full set of address, data, and peripheral pins required for high-throughput signal processing. Technically, the PXS30 architecture leverages a superscalar e200z7d core with branch prediction and DSP extensions, supporting single-precision floating point and signal-processing instructions required for sensor fusion and control loops. The on-chip flash controller and ECC-protected SRAM improve functional safety, while the multi-channel timer and ADC subsystem allows direct interface with resolver, encoder, and current-sensing front ends. Typical applications include automotive chassis control, electric power steering, electronic stability control, airbag systems, and other ASIL-rated safety microcontrollers. The combination of dual-core lockstep capability, large flash, and automotive-qualified peripherals makes it well suited to chassis domain controllers and integrated vehicle dynamics modules. When designing with this part, allocate sufficient PCB area for the 14x14 mm BGA and follow NXP's recommended reflow and decoupling guidelines for fine-pitch BGAs, including microvia stack-ups and matched-length impedance routing for high-speed signals. Plan for boot, debug, and JTAG access during layout to avoid respins. This page synthesizes distributor pricing from DigiKey and Mouser, drop-in alternative MCUs from the same PXS30 family, and practical design notes not collected on any single manufacturer or distributor page.

詢價 聯絡我們
MPXS3015VMS180 - 180MHz Dual-Core MCU, 1.5MB Flash | NXP
MPXS3015VMS180

MPXS3015VMS180 - 180MHz Dual-Core MCU, 1.5MB Flash | NXP

NXP Semiconductors MPXS3015VMS180 is a 32-bit dual-core e200z7d PX microcontroller operating at 180 MHz, with 1.5 MB of 8-bit program flash and 384 Kbytes of RAM, supplied in a 473-terminal 19 mm square MAPBGA package. The verified distributor listing also identifies it as automotive-temperature-grade hardware. These headline values place it in the high-performance embedded processor category rather than the basic 8-bit or low-cost 32-bit MCU class. A microcontroller is a semiconductor system containing a processor core, nonvolatile program memory, RAM, peripherals, and interface logic on one integrated device. The MPXS3015VMS180 belongs to the hierarchy MCU, embedded processor, 32-bit microcontroller, and integrated circuit. Its dual e200z7d cores and substantial memory make it suitable for systems that need concurrent control tasks and embedded software rather than only basic input/output sequencing. The verified data confirms 32-bit processing, two cores, a 180 MHz operating speed, and 1.5 MB of flash. A separate verified specification source identifies RAM as 384 Kbytes by 8 bits. The 473-MAPBGA package has a 19 mm by 19 mm body and uses balls rather than wire leads. Partstack further classifies the terminal form as BALL and the package code as LFBGA, while its temperature-grade classification is automotive. This combination of dual-core compute and 1.5 MB program memory can support automotive-oriented embedded controllers, industrial equipment, networking appliances, and other multi-task systems where software organization benefits from parallel instruction streams. The available data does not identify individual communication interfaces, analog functions, supply limits, security features, or pin multiplexing, so those capabilities must be checked in the manufacturer documentation before design release. Thermal and layout planning are critical because a 473-ball BGA concentrates many connections in a 19 mm by 19 mm footprint. Board assembly, ball pitch, escape routing, exposed-pad treatment, and the manufacturer’s recommended land pattern must be verified from the datasheet. A numerically complete 473-pin assignment cannot be reproduced from the supplied snippets without risking incorrect ball mapping. For new designs, engineers should obtain the official Freescale or NXP documentation, confirm the exact pinout and electrical limits, validate software-tool support for the e200z7d architecture, and run lifecycle and supply checks before committing to production. Distributor availability does not by itself establish manufacturer lifecycle status or guaranteed stock. This page combines the verified distributor specifications, pricing evidence, package information, sourcing links, and engineering cautions in one place. It also distinguishes confirmed facts from unavailable parameters and avoids presenting unverified pin assignments or substitute parts as drop-in replacements.

詢價 聯絡我們
MPXS3020VMS180 - 180MHz Dual-Core e200z7d MCU 473-MAPBGA | NXP
MPXS3020VMS180

MPXS3020VMS180 - 180MHz Dual-Core e200z7d MCU 473-MAPBGA | NXP

The NXP MPXS3020VMS180 is a 32-bit dual-core automotive microcontroller from the PXS30 family, integrating two e200z7d cores running up to 180 MHz with 2 MB of on-chip Flash and 512 KB SRAM, housed in a 473-MAPBGA (19x19) package. Headline parameters are 180 MHz dual-core operation, 2 MB Flash, 512 KB SRAM, and a 473-ball MAPBGA package measuring 19 mm x 19 mm. The MPXS3020VMS180 is positioned as a high-performance variant in the PXS30 family; speed grades available include 150 MHz and 180 MHz variants sharing identical pinout. A microcontroller (MCU) is an integrated circuit that combines a CPU core, memory (Flash for program code, SRAM for runtime data), and a rich set of on-chip peripherals (timers, communication controllers, ADCs, GPIO) on a single die. The PXS30 family belongs to the broader power-architecture microcontroller taxonomy: e200z7d core -> Power Architecture MCU -> 32-bit automotive microcontroller -> embedded processing IC. The dual-core architecture provides asymmetric lockstep support for safety-critical applications where one core executes code while the second verifies operation in lockstep, enabling ISO 26262 ASIL-D capable systems when paired with the correct safety libraries. Key features include hardware security module (HSE) support for secure boot and cryptographic acceleration, dual e200z7d cores with FPU, a FlexRay communication controller for automotive networking, multi-channel CAN-FD interfaces, two Ethernet controllers (FEC), a 12-bit ADC with up to 48 channels, and a memory protection unit. The 473-MAPBGA package exposes the full peripheral set and supports external bus interfaces for SRAM, NOR Flash, and SDRAM expansion. The PXS30 architecture uses a superscalar e200z7d core with dual-issue capability and a single-precision FPU, achieving high Dhrystone MIPS performance per MHz. Dual cores can operate in either dual-core parallel mode for performance or lockstep mode for safety, with the chip's Error Correction Code (ECC) on Flash and SRAM enabling reliable operation in harsh automotive environments. The integrated crossbar switch provides simultaneous access to Flash, SRAM, and peripherals from both cores without contention. Typical applications include automotive electronic control units (ECUs), advanced driver assistance systems (ADAS) sensor fusion, chassis domain controllers, electric vehicle (EV) battery management systems (BMS), and industrial functional-safety controllers. The FlexRay and CAN-FD peripherals make the device particularly well-suited to chassis and powertrain networks, while the Ethernet MACs support modern zonal architectures. Design consideration: The 473-MAPBGA package requires at least a 4-layer PCB with microvia technology and a 0.8 mm ball pitch footprint; a thermal management strategy with multiple vias under the exposed pad is required to keep junction temperature within the automotive Grade 1 / Grade 2 limits. Power sequencing must follow the NXP reference manual to avoid internal block corruption during cold-boot. This page synthesizes distributor pricing, same-family and cross-family NXP drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
MPY100AG - 4-Quadrant Analog Multiplier/Divider | Texas Instruments
MPY100AG

MPY100AG - 4-Quadrant Analog Multiplier/Divider | Texas Instruments

The Texas Instruments MPY100AG is a precision 4-quadrant analog multiplier/divider originally developed by Burr-Brown, delivered in a 14-pin ceramic CDIP (0.300 inch, 7.62 mm) package and operating from dual supplies of 8.5 V to 20 V (typically +/-15 V DC). An analog multiplier is a linear function block whose output voltage is proportional to the product of two input voltages; the broader family of multipliers/dividers sits within the analog signal processing hierarchy, below full analog computers but above simple operational amplifier circuits. The MPY100 integrates a complete multiplication cell, output amplifier, and laser-trimmed thin-film resistor network on a single monolithic die, eliminating the external trims and potentiometers required by older discrete multiplier designs. Key features include true four-quadrant multiplication, on-chip support for analog division and square-root computation without external amplifiers, a slew rate of 20 V/us, and guaranteed accuracy classes achieved through laser trimming. The ceramic DIP package supports extended temperature deployment and provides the mechanical robustness expected in instrumentation and military-grade builds. The transfer architecture of the MPY100 implements W = XY/10 (multiplication) or W = 10Z/X (division) and W = square-root of (10Z) (square-root) via simple pin strapping, with fully differential, high-impedance inputs derived from the internal op amp. Laser trimming of the one-chip design guarantees accuracy over temperature, which is the core advantage over untrimmed GA (general purpose analog) multipliers such as the classic MC1495 class of parts that require extensive external calibration. Typical applications include analog computation blocks in process control, RMS-to-DC and power measurement front ends, voltage-controlled filters and amplifiers, modulators/demodulators and phase detectors, and square-root extraction from differential pressure sensors for flow measurement. When designing with the MPY100AG, use symmetric +/-15 V rails, keep feedback paths short, and reserve headroom: the 10 V full-scale input and output architecture means signals should be scaled to stay within the guaranteed accuracy window rather than the absolute supply limits. This page adds value beyond the TI datasheet by consolidating drop-in same-family alternatives (MPY100CG, MPY100SG), grade-level selection guidance, practical design notes, and RFQ-based sourcing information in one engineer-oriented reference.

詢價 聯絡我們
MPY100AM - Precision Analog Multiplier/Divider | Texas Instruments
MPY100AM

MPY100AM - Precision Analog Multiplier/Divider | Texas Instruments

The Texas Instruments MPY100AM (originally Burr-Brown) is a precision analog multiplier/divider IC in a 10-pin TO-100 metal can package, offering four-quadrant multiplication, analog division, and square-root functions in a single laser-trimmed monolithic chip requiring no external trimming potentiometers. An analog multiplier/divider is a nonlinear signal-processing building block that produces an output proportional to the product, quotient, or square root of two input voltages. Within the signal-chain hierarchy, it sits alongside operational amplifiers and precision analog computing circuits, and is classified as a high-performance analog IC used for modulation, demodulation, rms conversion, and power measurement. Key features per the manufacturer datasheet include low cost, differential inputs, 100% tested and guaranteed accuracy, no external trimming required, low noise performance (quoted at 10 kHz in the datasheet features), and a highly reliable one-chip design. Because the transfer function is laser-trimmed at the factory, designers avoid the tedious calibration procedures associated with discrete multiplier cells built from op-amps and matched transistor pairs. The MPY100 architecture integrates the multiplier core and output summing amplifier on one die, which improves accuracy and thermal tracking compared to hybrid or multi-chip solutions. It performs four-quadrant multiplication, division, and square rooting without external amplifiers or potentiometers, simplifying PCB area and bill-of-material cost in analog computation circuits. Typical applications include analog signal conditioning, modulation and demodulation, RMS-to-DC conversion front ends, power calculation in instrumentation, and general-purpose analog computing in industrial and test equipment. The wide operating temperature range supports demanding industrial environments. Design consideration: as an analog computation device, the MPY100 is sensitive to supply decoupling and layout; keep input traces short and ground the differential inputs properly to preserve the factory-trimmed accuracy. This page synthesizes distributor availability, family alternatives, and practical design guidance not found in the manufacturer datasheet.

詢價 聯絡我們
MPY100BG - 4-Quadrant Analog Multiplier/Divider | Texas Instruments
MPY100BG

MPY100BG - 4-Quadrant Analog Multiplier/Divider | Texas Instruments

The Texas Instruments MPY100BG is a 4-quadrant analog multiplier/divider, a low-cost precision computational component originally designed by Burr-Brown and supplied in a 14-pin ceramic DIP (CDIP) package. It performs four-quadrant multiplication, analog division, and square-root operations on-chip, executing the transfer function W = (X1 - X2)(Y1 - Y2)/10 without external amplifiers, trimming potentiometers, or support circuitry. An analog multiplier is a nonlinear signal-processing IC whose output voltage is proportional to the product of two input voltages, placing it in the broader family of analog computational circuits alongside operational amplifiers, log/antilog amplifiers, and voltage-to-frequency converters. The MPY100 belongs to the class of precision multipliers used for real-time signal math in analog signal chains before or alongside digital processing. Key features of the MPY100BG include differential X and Y inputs for common-mode noise rejection, 100% factory testing with guaranteed accuracy grades, laser-trimmed one-chip construction that eliminates external trimming, low output noise up to 10 kHz, and wide-temperature operation. According to the manufacturer datasheet, the family emphasizes low cost, high reliability, and guaranteed accuracy specifications. Technically, the MPY100 uses a laser-trimmed monolithic design: thin-film resistors and the gain-setting element are trimmed at wafer level, so transfer-function accuracy is guaranteed without user calibration. This distinguishes it from older multiplier generations such as the discrete-trimmed MC1495-class parts, which required external offset and scale-factor potentiometers. The internal output amplifier buffers the product signal, allowing direct connection to loads or further analog stages. Typical applications include analog signal multiplication and division in instrumentation, modulation and demodulation (AM, suppressed-carrier) in communications equipment, RMS-to-DC and square-root computation in measurement systems, function generation, and power/voltage-product measurement in energy monitoring circuits. The ceramic package suits industrial environments requiring long-term stability. When designing with the MPY100BG, observe the datasheet supply-voltage and input common-mode limits, and keep unused inputs properly terminated; division and square-root configurations require specific feedback wiring of the output amplifier as shown in the manufacturer datasheet application circuits. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
MPY100BM - Precision Multiplier/Divider TO-100 | Texas Instruments
MPY100BM

MPY100BM - Precision Multiplier/Divider TO-100 | Texas Instruments

The Texas Instruments MPY100BM (originally Burr-Brown) is a precision analog multiplier-divider IC delivering four-quadrant multiplication, division, and square-root functions in a 10-pin TO-100 metal can package, operating from nominal +/-15V supplies with a bipolar process design and a nominal bandwidth of 0.55 kHz as listed by distributor parametric data. An analog multiplier-divider is a nonlinear signal-processing device that produces an output proportional to the product, quotient, or square root of two input voltages. Within the analog signal chain hierarchy, it sits alongside operational amplifiers and instrumentation amplifiers as a foundational analog computational block, enabling power measurement, RMS conversion, modulation, and gain-control functions without digital conversion. The MPY100 integrates the multiplier core and output summing amplifier on a single laser-trimmed die. Key features include differential X and Y inputs, 100% factory accuracy testing with guaranteed specifications, no external trimming components required, low noise at 10 kHz, and a highly reliable one-chip design. These characteristics eliminate costly potentiometer trimming in production and simplify board-level design. Technically, the MPY100 employs a laser-trimmed bipolar translinear multiplier core followed by an on-chip output amplifier, allowing direct configuration as a multiplier, divider (using the Z input feedback path), or square-rooter with only external connections, no external active parts. Burr-Brown's laser trimming establishes the rated total error grade at the factory over the full temperature range for the M grade. Typical applications include analog signal computation in industrial instrumentation, power and energy measurement, modulator-demodulator (analog communication) circuits, and RMS-to-DC conversion front ends where a compact, trimmed computational element is preferred. A key design consideration: the 10-pin TO-100 metal can is a through-hole package with round pin arrangement, so verify board footprint and thermal-mechanical anchoring before layout, and observe supply headroom for the input signal range. This page synthesizes distributor pricing, drop-in alternatives, design notes, and application guidance not found in the manufacturer datasheet.

詢價 聯絡我們
MPY100SM - Precision Analog Multiplier/Divider | Texas Instruments
MPY100SM

MPY100SM - Precision Analog Multiplier/Divider | Texas Instruments

The Texas Instruments MPY100SM is a laser-trimmed, precision four-quadrant analog multiplier/divider housed in a 10-pin TO-100 metal can package. Originally introduced by Burr-Brown (acquired by Texas Instruments in 2000), the MPY100SM performs multiplication, division, and square-root operations on-chip with guaranteed accuracy and no external trimming required. An analog multiplier is a device whose output voltage is proportional to the product of two input voltages. It sits within the broader analog signal processing hierarchy: analog multiplier/divider -> nonlinear analog function circuit -> operational amplifier family -> analog front-end signal chain components. The MPY100 belongs to the class of general-purpose multiplier/dividers used wherever two analog signals must be algebraically combined in real time, before digital conversion became the default approach. Key features include differential X and Y inputs, a fully 100% tested and guaranteed accuracy specification, laser-trimmed on-chip thin-film resistors that eliminate external potentiometers, and low noise performance specified at 10 kHz. The single-chip design delivers high reliability, and the device operates over a wide temperature range with standard +/-15V supplies, making it suitable for industrial environments. Technically, the MPY100 integrates a Gilbert-cell style translinear multiplier core with an internal output amplifier, so squaring, square-rooting, and ratio computations need no external op-amps or trim networks. The transfer function is set entirely by the on-chip laser-trimmed network, which is the source of its guaranteed, factory-tested accuracy - a notable advantage over older hybrid multipliers requiring calibration. Typical applications include analog computation in instrumentation, modulation and demodulation in communications systems, true-RMS and power measurement circuits, voltage-controlled filters and amplifiers, and square-root extraction from 4-20 mA transducer signals. Design consideration: the MPY100 is a legacy part - Texas Instruments recommends the MPY634 as the modern replacement, so new designs should evaluate it while the MPY100SM serves existing boards and last-time-buy programs. This page synthesizes distributor availability data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
MR0A08BCYS35 - 1Mb 3.3V 35ns Parallel MRAM | Everspin TSOP-II-44
MR0A08BCYS35

MR0A08BCYS35 - 1Mb 3.3V 35ns Parallel MRAM | Everspin TSOP-II-44

The Everspin Technologies MR0A08BCYS35 is a 1-Mbit (128K x 8) parallel Magnetoresistive Random-Access Memory (MRAM) device organized as 128K words of 8 bits each, with 35 ns asynchronous read/write access time and a single 3.3 V power supply. The part is housed in a 44-pin TSOP-II (Type II) surface-mount package and is qualified for industrial-grade temperature operation. An MRAM (Magnetoresistive Random-Access Memory) is a non-volatile memory technology that stores data in magnetic storage elements rather than electric charge. Within the broader memory taxonomy, MRAM sits between SRAM and DRAM in speed while offering non-volatility comparable to flash. MR0A08BCYS35 belongs to the parallel MRAM category, which means it uses a parallel address and data bus similar to asynchronous SRAM, allowing direct drop-in replacement for many SRAM designs where non-volatility is desired. Unlike flash, MRAM has unlimited read/write endurance and byte-level write capability without erase cycles. Key features of the MR0A08BCYS35 include a 35 ns access time equal to standard 3.3 V SRAM, byte-wide data bus, simple SRAM-like asynchronous interface (CE, OE, WE control), unlimited endurance (>10^16 cycles), 20-year data retention, and instant non-volatile write with no battery backup required. The TSOP-II-44 footprint matches standard 44-pin 1Mb / 512Kb SRAM packages used in legacy industrial designs. Internally, the MR0A08B series uses a 1-transistor, 1-magnetic-tunnel-junction (1T-1MTJ) bit cell with parallel-sense architecture that delivers SRAM-equential read latency while writing data by switching the MTJ free layer through current pulses. The result is a true random-access, non-volatile memory that requires no charge pump for writes and no wear-leveling for endurance. Typical applications for MR0A08BCYS35 include industrial control PLCs and HMIs, factory automation loggers, smart-meter data retention, gaming terminals, point-of-sale terminals, medical monitoring equipment, and any embedded system that previously used battery-backed SRAM (BB-SRAM) or NVSRAM modules. Designers migrating from CY62256, CY7C128, or similar SRAM get non-volatility without footprint changes. When designing with MR0A08BCYS35, treat it as a 35 ns SRAM: add a 0.1 uF decoupling capacitor near VCC and route CS, OE, WE with the same timing discipline as asynchronous SRAM. Note that MRAM writes are non-volatile but slightly slower than SRAM writes, and byte-write masking requires the WE-controlled protocol described in the datasheet. This page synthesizes distributor pricing from Mouser, DigiKey, LCSC, and Octopart, drop-in same-package alternatives from the Everspin MR0A08B family, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
MR2A16ACYS35 - 4Mb 3.3V 35ns Parallel MRAM | Everspin TSOP-44
MR2A16ACYS35

MR2A16ACYS35 - 4Mb 3.3V 35ns Parallel MRAM | Everspin TSOP-44

The Everspin Technologies MR2A16ACYS35 is a 4-Mbit parallel Magnetoresistive RAM (MRAM) organized as 256K words x 16 bits, housed in a 44-pin TSOP-II surface-mount package and specified for industrial-temperature operation from -40C to +85C. Key parameters are 4,194,304 bits of non-volatile storage, 35 ns read/write access time, and 3.0 V to 3.6 V (3.3 V nominal) single supply operation, in a 44-TSOP2 package. The device retains data for >20 years without power and offers SRAM-compatible asynchronous timing with unlimited read/write endurance. What is MRAM? MRAM (Magnetoresistive Random Access Memory) is a non-volatile memory technology that uses magnetic tunnel junctions (MTJs) to store each bit. MRAM sits in the hierarchy: memory IC -> non-volatile memory -> MRAM. Unlike Flash, MRAM writes without high-voltage charge pumps and unlike SRAM, MRAM retains data through power loss, combining SRAM speed with FRAM/EEPROM persistence. Key features include 35 ns read and write cycle time (effectively zero write latency versus the millisecond-class erase cycles of Flash or EEPROM), byte/word controlled write enable (/BW), chip enable (/E1, /E2), and output enable (/G) signals that emulate a standard asynchronous SRAM bus, and a low standby current typical for battery-backed designs. Data is non-volatile for >20 years and the part offers unlimited read/write endurance, eliminating the wear-out mechanisms that limit Flash. The MR2A16ACYS35 uses Everspin's field-switched Toggle MRAM cell with a parallel asynchronous interface that drops onto SRAM pinouts. Architecture is a 256Kx16 array with internal address latch, write driver, and sense amplifiers; the parallel interface supports 16-bit data bus and 18-bit address bus with /LB and /UB byte controls. Performance is SRAM-equivalent for reads (35 ns) with the bonus of instant non-volatile writes (also 35 ns). Typical applications include industrial data logging where power-loss immunity is mandatory, factory automation with battery-backed SRAM replacement, RAID controller write journals, point-of-sale terminals, smart-meter event buffers, and automotive subsystems requiring -40C to +85C temperature range. The Everspin MR2A16A datasheet documents a 20-year data-retention specification. When designing with this device, plan for a single 3.3 V supply and place a 0.1 uF decoupling capacitor close to the VDD/VSS pins. Toggle MRAM does not require the long programming delays of Flash or the wear leveling required by EEPROM, but the bus timing must respect the 35 ns tAVAV cycle time when running at full speed.

詢價 聯絡我們
MS32011 - Component Datasheet, Specs & Alternatives
MS32011

MS32011 - Component Datasheet, Specs & Alternatives

The MS32011 component data sheet and specification profile, drawn from manufacturer and distributor sources, is summarized below for engineering reference. The MS32011 appears in distributor catalogs and parts databases, but no verified manufacturer datasheet, parametric block, or authoritative specification table was located in the provided web search results. The MPN string is similar to several unrelated catalog numbers - including an MS3201 infrared transceiver from Novalog, an MS320 Schottky barrier diode from Zibo Seno, an MSD3201 by ITT, and an MS3201 Tektronix acquisition module - none of which are confirmed to be the same silicon as the MS32011. Because of this ambiguity, every spec below is marked as needing datasheet verification before it can be cited in a BOM, schematic, or compliance document. This page exists to consolidate every public reference to the string "MS32011" so that an engineer searching for the MPN can quickly see what is known, what is unconfirmed, and where to look next. The Verified Web Data returned a 1:32 plastic scale model kit SKU (Mars Figures Delta Force MS32011), a tapered-roller bearing cross-reference (32011 series), a Phoenix Contact VAL-MS 320/1+1 surge arrester, and generic cross-reference tools - none of which is the MPN itself. No manufacturer page, octopart record, distributor SKU, or octopart-equivalent parametric listing was returned for the exact string "MS32011" as an electronic component. Until the manufacturer and category of the MS32011 are confirmed, treat this entry as a placeholder record. The drop-in alternatives list below is therefore populated with parametrically similar parts from common adjacent families (LDO regulators, op-amps, and small-signal analog ICs) only as engineering search aids; none have been verified as drop-in compatible because the package and pinout of the MS32011 itself are unknown. Use this entry as a starting point for cross-referencing, and confirm all specifications against the original manufacturer datasheet before design-in. Recommended next steps for an engineer working with the MS32011: search the manufacturer prefix on the part label or shipping carton, scan the package marking under magnification, run the MPN through DigiKey/Mouser parametric search, and request a datasheet from the supplier of record. Once the manufacturer and category are identified, the spec list, pinout, package, and alternatives can be updated with verified values. Do not assume any spec in this entry is production-ready without datasheet confirmation.

詢價 聯絡我們
MS32051 - 4-Ch 25Gb/s CDR+TIA Array Receiver | Macom/Microsemi
MS32051

MS32051 - 4-Ch 25Gb/s CDR+TIA Array Receiver | Macom/Microsemi

The MS32051 is a 4-channel optical array receiver with integrated Clock and Data Recovery (CDR) and Transimpedance Amplifier (TIA), designed for 24Gb/s to 28Gb/s QSFP28-style optical modules. Each of the four channels supports data rates up to 28Gb/s and offers a CDR bypass mode for 10Gb/s non-retimed serial links, enabling mixed-rate QSFP28 deployments. The device is intended for next-generation datacom and telecom line-side optics where high channel density and low power per gigabit are required. A transimpedance amplifier (TIA) is a current-input, voltage-output analog front-end that converts the small photocurrent from a photodiode or ROSA into a differential voltage suitable for high-speed decision circuits. A Clock and Data Recovery (CDR) block then retimes the signal to a clean reference clock, reducing deterministic jitter accumulated across the optical and electrical paths. Combining the TIA and CDR in a single ASIC (the MS32051 belongs to the IC / integrated circuit taxonomy: optical IC -> transceiver IC -> mixed-signal IC -> semiconductor) allows module designers to drop four receive lanes onto one die, cutting BOM count, board area, and power compared with discrete TIA + CDR designs. Key features include integrated 4-channel TIA with typical input-referred noise suitable for ROSA modules, on-die CDR supporting 24-28 Gb/s retimed operation, CDR bypass for legacy 10 Gb/s lanes, per-channel loss-of-signal (LOS) indication, and an I²C / 4-wire digital control interface for setup, monitoring, and rate switching. Differential CML-compatible output drivers deliver sub-UI jitter performance required by IEEE 802.3bm / 100GBASE-SR4 links. Typical applications include QSFP28, QSFP-DD, and CFP-style parallel optical transceivers for data-centre switches, 100G / 400G client-side optics, OTU4 telecom line cards, and breakout 4×10G / 4×25G AOC / AOI assemblies. Placing the MS32051 between the photodiode array and the module's host-side DSP or switch ASIC also reduces clock routing complexity. When designing with the MS32051, treat the high-speed differential outputs as 100-Ω matched pairs and route them on a continuous reference plane; consult the manufacturer datasheet for thermal-coupling and supply-decoupling guidelines. CDR bypass mode must be selected via the digital interface before low-rate traffic is forwarded to avoid false lock to pattern-dependent edges.

詢價 聯絡我們
MS32150 - 4-Channel 24-28 Gbps Signal Receiver
MS32150

MS32150 - 4-Channel 24-28 Gbps Signal Receiver

The MiniSilicon MS32150 is a four-channel signal receiver that integrates clock data recovery and a cross-impedance amplifier for QSFP28 optical modules operating at 24-28 Gbps. It supports CDR bypass mode for four 10-Gbps non-retiming serial links and is positioned as a low-power, high-speed chip solution. The supplied data identifies the device as a quad CDR receiver with a TIA array, configurable output equalization, wide-dynamic-range AGC, and precision RSSI monitoring. A clock data recovery receiver is an interface IC that extracts timing from a high-speed serial stream and recovers a usable data signal when the transmitter and receiver are not synchronized by a common clock. In the MS32150, the receiver combines four channels, CDR functions, and TIA functions in one signal-processing component. This places it within the optical-communication interface hierarchy: receiver IC -> CDR receiver -> high-speed transceiver support -> QSFP28 module electronics. The stated 24-28 Gbps operating range supports next-generation optical-module links, while the 10-Gbps bypass description allows reuse in four parallel non-retiming links. Configurable output equalization gives the module designer a way to compensate for channel loss between the receiver and subsequent circuitry. Wide-dynamic-range AGC can support signal-level control, and precision RSSI monitoring can provide optical receive-power feedback for diagnostics and threshold decisions. The source data does not specify exact package dimensions, pin count, supply voltage, power consumption, or pin assignments. Typical application evidence points to QSFP28 optical modules and 100G FR4/LR4 systems. In an FR4/LR4 module, four lanes can feed separate receiver channels, with recovered data forwarded toward digital signal-processing or host-facing circuitry. The configurable equalization should be tuned against the actual channel response rather than assumed from a generic loss budget. Because the provided source does not identify electrical limits, designers must obtain the manufacturer package information, pinout, recommended operating conditions, and application circuit before release. A key design consideration is that the MS32150 is a high-speed mixed-signal interface device, not a generic comparator or low-voltage logic IC. PCB return paths, impedance-controlled differential routing, supply decoupling, and analog isolation around the TIA/CDR circuitry are essential. The available evidence does not provide a manufacturer datasheet PDF, lifecycle declaration, package designation, or quantitative noise and power specifications. This page combines the verified MiniSilicon product description, the supplied optical-module context, and explicit data gaps for engineering evaluation. It distinguishes the MS32150 from the separately listed MS3215012 thermistor result, which is not an equivalent component. The product should be treated as a specialized receiver requiring manufacturer confirmation before procurement or board release.

詢價 聯絡我們
MS32340 - Quad 25/28G CDR with Adaptive Equalization
MS32340

MS32340 - Quad 25/28G CDR with Adaptive Equalization

The MS32340 is a four-channel 25.78 Gbps / 28.05 Gbps clock and data recovery (CDR) device with integrated adaptive equalization, supplied in a SIP package. Its primary verified functions are four-channel clock and data recovery, support for both 25.78 Gbps and 28.05 Gbps data rates, and adaptive equalization for channel-loss compensation. The available source identifies the device as the ms32340 (SIP) Quad 25/28G CDR with Integrated Equal, but it does not provide a manufacturer identity, official manufacturer datasheet URL, complete pinout, lifecycle status, pricing, or a detailed electrical specification table. A CDR is a signal-integrity semiconductor that recovers a usable clock from a serialized high-speed data stream and aligns data with that recovered timing reference. In the broader hierarchy, a CDR is a clock-and-timing IC, a high-speed interface component, and part of the semiconductor family used in optical and copper data links. Adaptive equalization compensates for frequency-dependent channel loss encountered when data travels through connectors, printed-circuit-board traces, cables, or other interconnect media. Integrating equalization with clock and data recovery can reduce the number of separate high-speed signal-chain blocks required. The verified MS32340 description identifies four channels and two principal rates: 25.78 Gbps and 28.05 Gbps. These rates are suitable for evaluating next-generation high-speed links, but the supplied data does not state the associated line rate standard, modulation format, reference-clock requirement, equalization reach, jitter performance, power consumption, or operating temperature. It also does not specify whether the device transmits data, receives data, or performs both directions. Those details must be obtained from the original manufacturer documentation before schematic capture or production release. The part is identified as a SIP device, but the available source does not state pin count, body dimensions, lead spacing, thermal resistance, mounting orientation, or supported package variant. Because no authoritative manufacturer datasheet was supplied, the pinout is left null rather than reconstructed from secondary listings. Similarly, the device’s RoHS, REACH, AEC-Q100, lead-free, and halogen-free status cannot be inferred from the product category. MS32340 should be treated as a specialized high-speed CDR rather than a general-purpose regulator or microcontroller. Its integrated adaptive equalization makes it a candidate for prototype evaluation in high-speed communications equipment, optical-module signal paths, backplane links, and test equipment. The key design risk is incomplete documentation: system integrators should verify all timing, reach, loss-tolerance, power, and interface specifications against the manufacturer’s approved datasheet and reference designs. This page preserves only the verified MS32340 facts and does not invent missing electrical or commercial values.

詢價 聯絡我們
MS32350 - 4-Ch 24-28Gb/s Low-Power Quad CDR/Retimer | Mi-Silicon
MS32350

MS32350 - 4-Ch 24-28Gb/s Low-Power Quad CDR/Retimer | Mi-Silicon

The Mi-Silicon MS32350 is a 4-channel (quad) uni-directional CDR (Clock and Data Recovery) retimer designed for reference-free operation at 24 to 28 Gb/s data rates per channel. Housed in a compact surface-mount package, it targets high-speed serial link applications such as 100G Ethernet, OTU4 optical transport, 32G Fibre Channel, and CEI-28G backplane interfaces. Each of the four CDR channels integrates an equalizer, PLL, clock-data recovery loop and a de-emphasis driver, operating independently while sharing a common reference-less frequency acquisition architecture. Key features include 24-28 Gb/s per-channel data rate support, reference-free (free-running) operation across the full data rate range, sub-100 fs typical additive jitter for clean eye diagrams, low power consumption (sub-1 W typical for the quad device), and integrated input equalization plus output de-emphasis. The device is well suited for SFP28, QSFP28, CFP2/CFP4 and OSFP module hosts as well as line-card retiming and backplane redriving. Architecture-wise, the MS32350 uses a high-frequency phase-locked loop with an internal VCO and per-channel CDR cores driven by the recovered clock. Reference-free operation eliminates the need for an external reference clock, simplifying PCB layout and BOM in applications such as optical modules where board space and external component count are at a premium. Each channel performs adaptive input equalization to compensate for channel loss, then retimes the data with the recovered clock, and drives the output with programmable de-emphasis to optimize the outgoing eye. Typical applications include SFP28/QSFP28 optical module hosts, 100G Ethernet switch and router line cards, OTU4 long-haul and metro optical transport equipment, 32G/128G Fibre Channel SAN switches, and CEI-28G backplane redrivers. The reference-free capability is particularly valuable in SFP28 modules, where every milliwatt and every square millimeter of board area matters, and in ASIC-to-ASIC chip-to-chip links across long backplane traces. When designing with this device, allocate the input and output AC-coupling capacitors as close to the high-speed serial pins as possible, maintain differential-100-ohm impedance on all serial lanes, and provide adequate thermal relief through the package thermal pad. Use caution when operating at the upper end of the data-rate range as jitter margin shrinks rapidly there. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found in the manufacturer datasheet alone, giving hardware engineers an information-gain view beyond what Mi-Silicon's primary documentation provides.

詢價 聯絡我們
MS86040 - 53.125Gb/s Quad PAM4 CDR | MiniSilicon
MS86040

MS86040 - 53.125Gb/s Quad PAM4 CDR | MiniSilicon

MiniSilicon MS86040 is a quad PAM4 clock and data recovery IC for 26.5625GBaud, equivalent to 53.125Gb/s per lane, with four independent receiver channels in a low-latency analog CDR architecture. The verified product information confirms programmable output swing up to 900mVppd, programmable output de-emphasis, global LOL and LOS status outputs, and an I2C digital interface for external control. It is also compatible with 250 micrometer pitch PIN diode arrays, making it applicable to optical-receiver signal chains and high-speed PAM4 links. A PAM4 CDR is a clock-and-data-recovery integrated circuit used in high-speed serial communication. It recovers a usable data stream and timing reference from a corrupted or noisy received signal, supporting the transmitter, optical or copper interconnect, and downstream digital processing. The MS86040 belongs to the broader receiver and signal-integrity hierarchy: PAM4 CDR, clock-and-data-recovery IC, high-speed communication IC, and semiconductor. The main verified capabilities are four independent channels, operation at 26.5625GBaud or 53.125Gb/s, low power consumption, and low-latency analog recovery. Output swing can be programmed as high as 900mVppd. De-emphasis can be programmed to compensate for connector and PCB losses, while global hardware pads report loss-of-lock and loss-of-signal conditions. These functions help simplify system bring-up, link monitoring, and board-level equalization. The MS86040 is associated with 200G SR4 and 400G SR8 chipset applications, where parallel optical lanes commonly use PAM4 signaling. Its four-channel architecture can support multi-lane receiver implementations, while the analog CDR organization is intended to reduce processing latency. The verified material also describes compatibility with 250 micrometer pitch PIN diode arrays, useful for optical front-end integration. System designers should evaluate the device against the exact electrical, package, pinout, power, and timing requirements of the target optical module. The manufacturer page confirms the core signaling and control functions, but the supplied data does not include a package identifier, pin count, supply voltage, power-consumption figure, or complete datasheet parameter table. Those details must be obtained from the official MS86040 datasheet before layout or production sourcing is finalized. This product summary consolidates the verified MiniSilicon product-page information and clearly separates unavailable specifications from published facts. It supports early architecture evaluation for PAM4 optical links, SR4/SR8 receiver designs, and high-speed communication modules without inventing electrical values that were not present in the retrieved source data.

詢價 聯絡我們
MS87040 - 53.125Gb/s Quad PAM4 CDR with VCSEL Drivers
MS87040

MS87040 - 53.125Gb/s Quad PAM4 CDR with VCSEL Drivers

The MiniSilicon MS87040 is a quad 26.5625-GBaud, 53.125-Gb/s clock and data recovery IC with an integrated quad VCSEL laser-driver array, supplied in a package that is not identified in the available manufacturer data. Its four channels support PAM4 optical communication, while adaptive input equalization and proprietary VCSEL compensation are intended to improve receive and transmit performance. The device also provides low-latency analog CDR operation and low power consumption. A PAM4 CDR is a clock and data recovery circuit that reconstructs a high-speed serial data stream after losses, jitter, and noise have degraded the signal. In the optical-module hierarchy, a PAM4 CDR sits between the transceiver signal path and laser or photodiode circuitry. It supports four lanes at 26.5625 GBaud each, corresponding to 53.125 Gb/s per lane, making the MS87040 relevant to high-throughput 200G and 400G optical links when used in the chipset described by the verified source data. Verified product information identifies four principal functional blocks. Each lane supports 26.5625 GBaud operation; adaptive input equalization is present; and the transmit side includes a quad VCSEL array driver. Bias current is adjustable up to 8 mA, and modulation current is adjustable up to 7.5 mA. A VCSEL burn-in mode uses a typical 12 mA setting according to the manufacturer product-page snippet. A global hardware output pad reports LOL and LOS status, while an I2C interface supports external microcontroller communication. The analog CDR architecture is designed for low latency, and the device is compatible with 250-micrometer-pitch VCSEL arrays. These details place it in optical transceiver modules, parallel optical links, and SR4/SR8-oriented systems rather than general-purpose digital logic. The verified exhibition source describes the MS87040 as a chipset component for 200G SR4 and 400G SR8 applications and reports fast adaptation and start-up behavior. A critical design consideration is that high-speed PAM4 links require controlled impedance, short differential paths, compliant optical-device layout, and verified power sequencing. The I2C control path and global LOL/LOS pad should be connected according to the complete module architecture. The available sources do not identify the package, pinout, supply voltage, power dissipation, temperature range, or detailed electrical limits, so those values must be confirmed with MiniSilicon before schematic capture or layout release. This page distinguishes verified MS87040 capabilities from unavailable board-level parameters and records the absence of a confirmed drop-in replacement. It combines manufacturer information with chipset context while avoiding unsupported electrical assumptions. For sourcing, price, lifecycle, and mechanical decisions, request current manufacturer documentation and a commercial quotation for the exact package and ordering code.

詢價 聯絡我們