AD600JR vs AD602JR 比較
詳細並排比較 AD600JR 由 Analog Devices 與 AD602JR 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | AD600JR | AD602JR |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Dual-channel variable gain amplifier | — |
| Channel Count | 2 channels | — |
| Gain Control | Independent control for each channel | — |
| Maximum Gain Range | +30 dB | — |
| Gain Response | Linear in dB | — |
| Absolute Gain Accuracy | 0.3 dB | — |
| Input Noise Density | 1.4 nV/√Hz | 1.4 nV/√Hz |
| Small-Signal Bandwidth | 35 MHz at −3 dB | — |
| Slew Rate | 275 V/µs | — |
| Total Harmonic Distortion | −60 dBc at 1 V output | -60 dBc THD at 1 V output |
| 封裝 | 16-lead SOIC | — |
| 安裝類型 | Surface mount | Surface mount |
| 工作溫度範圍 | 0°C to 70°C | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | [DATA_NEEDED: supply voltage range] |
| 靜態電流 | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: quiescent current] |
| 輸入電壓範圍 | [DATA_NEEDED: input voltage range] | — |
| Gain-Control Input Type | [DATA_NEEDED: gain-control input type] | — |
| Output Load Requirement | [DATA_NEEDED: output load requirement] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Channels | — | 2 channels |
| Channel Architecture | — | 2 independent gain-control channels |
| Gain Range | — | -10 dB to +30 dB |
| Gain-Control Response | — | Linear in dB |
| Gain Accuracy | — | 0.3 dB accurate absolute gain |
| -3 dB Bandwidth | — | 35 MHz |
| Number of Gain Ranges | — | 2 gain ranges |
| Upper Gain Range | — | +30 dB |
| Package Type | — | 16-lead SOIC |
| Primary Application | — | Ultrasound imaging |
| Signal Type | — | Analog |
| Control Interface | — | Analog gain control |
| Input Impedance | — | [DATA_NEEDED: input impedance] |
| Output Impedance | — | [DATA_NEEDED: output impedance] |