AD676JN vs AD676BD 比較
詳細並排比較 AD676JN 由 Analog Devices 與 AD676BD 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | AD676JN | AD676BD |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | ADC/DAC | ADC/DAC |
| 生命週期狀態 | 最後購買 | Unknown |
| Number of Bits | 16 | — |
| 取樣率 | 100 kSPS | 100 kSPS |
| Conversion Time | 10 us | 10 us |
| Architecture | SAR (Successive Approximation Register) | Switched-capacitor charge redistribution |
| Input Channels | 1 single-ended | 1 input |
| Data Interface | Parallel (16-bit) | — |
| Input Type | Single-Ended, unipolar or bipolar (pin-strapped) | — |
| Integral Nonlinearity (INL) | 1 LSB max (no missing codes) | — |
| Total Harmonic Distortion (THD) | -97 dB | — |
| Signal-to-Noise Ratio (SNR) | 90 dB | — |
| 封裝 | 28-pin PDIP (Plastic DIP, 0.600 inch / 15.24 mm) | 28-pin SBCDIP |
| 工作溫度 | 0 C to +70 C | — |
| 安裝類型 | Through-Hole (DIP) | Through-hole |
| Packaging | Tube | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Autocalibration | On-chip, automatic on power-up and on CAL command | On-chip autocalibration |
| Sample-and-Hold | On-chip | — |
| ADC Type | — | Successive-approximation sampling ADC |
| 解析度 | — | 16 bit |
| Output Format | — | 16-bit parallel output |
| Output Codes | — | No missing codes |
| Integral Nonlinearity | — | 1 LSB |
| Total Harmonic Distortion | — | 97 dB |
| Signal-to-Noise Plus Distortion Ratio | — | 90 dB |
| Full-Power Bandwidth | — | 1 MHz |
| On-Chip Sample-and-Hold | — | Included |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |