AD8015ARZ vs AD8017ARZ 比較
詳細並排比較 AD8015ARZ 由 Analog Devices 與 AD8017ARZ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | AD8015ARZ | AD8017ARZ |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Single-supply differential-output transimpedance amplifier | — |
| Bandwidth | 240 MHz | — |
| Supported Data Rate | Up to 155 Mbps | — |
| Pulse Width | 500 ps | — |
| 上升時間 | 1.5 ns | — |
| 下降時間 | 1.5 ns | — |
| 輸出配置 | Differential voltage | — |
| Input Type | Photodiode current input | — |
| Supply Configuration | Single supply | — |
| 封裝 | 8-pin SOIC | 8-lead SOIC |
| 安裝類型 | Surface mount | Surface mount |
| Primary Application | Fiber-optic receiver | Single-supply xDSL CPE line driving |
| Optical Protocol Application | FDDI receiver | — |
| Telecommunications Application | SONET/SDH receiver | — |
| Supply Voltage Range | [DATA_NEEDED: Supply Voltage Range] | [DATA_NEEDED: supply voltage range] |
| Input Transimpedance | [DATA_NEEDED: Input Transimpedance] | — |
| 工作溫度範圍 | [DATA_NEEDED: Operating Temperature Range] | [DATA_NEEDED: operating temperature range] |
| RoHS 狀態 | [DATA_NEEDED: RoHS Status] | unknown |
| REACH Status | [DATA_NEEDED: REACH Status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 Qualification] | not_applicable |
| Amplifier Type | — | Dual high-speed current-feedback operational amplifier |
| Number of Channels | — | 2 channels |
| Number of Circuits | — | 2 circuits |
| Supply Current per Amplifier | — | 7 mA |
| Optimized Supply | — | +12 V |
| Output Current per Amplifier | — | 200 mA typical |
| Output Swing | — | Within 1.0 V of the supply rail |
| Maximum Output Swing | — | 10 V peak-to-peak |
| Load Capability | — | Low-distortion drive of 100 ohm and capacitive loads |
| 腳位數 | — | 8 pins |
| Lead-Free Package Option | — | AD8017ARZ and AD8017ARZ-REEL |
| Evaluation Board | — | AD8017AR-EVAL |
| Gain-Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |