AD842JN vs AD842KH 比較
詳細並排比較 AD842JN 由 Analog Devices 與 AD842KH 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | AD842JN | AD842KH |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Single wideband precision operational amplifier | — |
| Gain-Bandwidth Product | 80 MHz | 80 MHz at gain of 2 |
| Minimum Stable Gain | 2 | 2 |
| Supply Voltage Range | +/-5 V to +/-18 V | [DATA_NEEDED: supply voltage range] |
| Minimum Output Current Drive | 100 mA | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 8 µA |
| Slew Rate | [DATA_NEEDED: slew rate] | 375 V/µs |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Power-Supply Rejection Ratio | [DATA_NEEDED: power-supply rejection ratio] | — |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 封裝 | 14-pin PDIP | TO-8-12 |
| 安裝類型 | Through-hole | — |
| Process Technology | Junction-isolated complementary bipolar (CB) process | Junction-isolated complementary bipolar (CB) process |
| Short-Circuit Protection | [DATA_NEEDED: short-circuit protection] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Amplifier Type | — | Single-channel operational amplifier |
| Settling Time | — | 0.01% settling for a 10 V step |
| Full-Power Bandwidth | — | 6.0 MHz at 20 V peak-to-peak output |
| Maximum Input Offset Voltage | — | 1 mV |
| Offset Voltage Listing Value | — | 1.5 mV |
| Number of Channels | — | 1 channel |
| Output Current Capability | — | [DATA_NEEDED: output current rating] |
| Input Offset Drift | — | [DATA_NEEDED: input offset voltage drift] |
| Input Noise Voltage | — | [DATA_NEEDED: input noise voltage] |
| Total Harmonic Distortion | — | [DATA_NEEDED: total harmonic distortion] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |