AD976ARZ vs AD976AR 比較
詳細並排比較 AD976ARZ 由 Analog Devices 與 AD976AR 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | AD976ARZ | AD976AR |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | ADC/DAC | ADC/DAC |
| 生命週期狀態 | 啟用中 | Obsolete |
| ADC Type | Successive Approximation (SAR) | — |
| 解析度 | 16 bit | 16 bit |
| 取樣率 | 100 kSPS | — |
| Input Channel Type | Single-ended | — |
| Number of Inputs | 1 input | 1 input |
| 供應電壓 | 5 V | 5 V single supply |
| Analog Supply Voltage Range | 4.75 V to 5.25 V | — |
| Digital Supply Voltage Range | [DATA_NEEDED: digital supply voltage range] | — |
| Internal Reference Voltage | 2.5 V | — |
| Data Interface | Parallel | High-speed parallel |
| On-Chip Clock | Integrated | Yes |
| Maximum Power Dissipation | 100 mW | — |
| Process Technology | BiCMOS | BiCMOS |
| 封裝 | 28-pin SOIC | 28-lead SOIC |
| 安裝類型 | Surface Mount | Surface mount |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | — |
| 輸入電壓範圍 | [DATA_NEEDED: analog input voltage range] | [DATA_NEEDED: analog input voltage range] |
| Signal-to-Noise Ratio | [DATA_NEEDED: signal-to-noise ratio] | — |
| Total Harmonic Distortion | [DATA_NEEDED: total harmonic distortion] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Throughput Rate | — | 100 kSPS |
| Architecture | — | Successive-approximation switched-capacitor ADC |
| Input Type | — | Single-ended |
| Internal Reference | — | 2.5 V |
| Reference Selection | — | External or internal |
| 工作溫度 | — | [DATA_NEEDED: operating temperature range] |
| Power Dissipation | — | [DATA_NEEDED: maximum power dissipation] |
| Output Coding | — | [DATA_NEEDED: output code format] |
| Acquisition Time | — | [DATA_NEEDED: acquisition time] |
| DNL | — | [DATA_NEEDED: differential nonlinearity] |
| INL | — | [DATA_NEEDED: integral nonlinearity] |
| SNR | — | [DATA_NEEDED: signal-to-noise ratio] |
| ENOB | — | [DATA_NEEDED: effective number of bits] |
| MSL | — | [DATA_NEEDED: moisture sensitivity level] |
| REACH Status | — | [DATA_NEEDED: REACH status] |