ADM4855AR vs ADM4850ARZ 比較
詳細並排比較 ADM4855AR 由 Analog Devices 與 ADM4850ARZ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | ADM4855AR | ADM4850ARZ |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | RS-485/RS-422 differential line transceiver | Differential line transceiver |
| 供應電壓 | 5 V | 5 V |
| Maximum Data Rate | 500 kbps | 115 kbps |
| Duplex Support | Half-duplex and full-duplex family options | — |
| Bus Configuration | Multipoint bus transmission lines | — |
| Signal Type | Balanced differential data transmission | Balanced differential |
| Standards Compliance | EIA RS-485 and RS-422 compliant | — |
| EMI Feature | Reduced slew rate for low EMI | — |
| Receiver Safety | True fail-safe receiver | — |
| 封裝 | 8-lead SOIC | 8-pin SOIC |
| 安裝類型 | Surface mount | Surface mount |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 供應電流 | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: supply current] |
| Driver Output Current | [DATA_NEEDED: output current capability] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Propagation Delay | [DATA_NEEDED: driver and receiver propagation delays] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS compliance statement] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance statement] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Supported Standards | — | EIA RS-485 and RS-422 |
| Duplex Mode | — | Half-duplex |
| Bus Architecture | — | Multipoint bus |
| Slew Rate | — | Limited |
| Transmitter Count | — | 1 |
| Receiver Count | — | 1 |
| Tube Quantity | — | 1 unit per tube |
| Reel Packaging | — | ADM4850ARZ-REEL7 |
| Datasheet Revision | — | Rev. F |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |