ADM4856AR vs ADM485JRZ 比較
詳細並排比較 ADM4856AR 由 Analog Devices 與 ADM485JRZ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | ADM4856AR | ADM485JRZ |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | RS-485/RS-422 differential line transceiver | RS-485/RS-422 differential line transceiver |
| 供應電壓 | 5 V | — |
| Maximum Data Rate | 2.5 Mbps | 5 Mbits/s |
| Communication Modes | Half-duplex and full-duplex | — |
| Standards | EIA RS-485 and RS-422 compliant | — |
| Slew Rate | Reduced, slew-rate limited | — |
| Receiver Safety | True fail-safe receiver | — |
| 封裝 | 8-pin SOIC | 8-pin SOIC |
| Package Width | 3.90 mm | — |
| 安裝類型 | Surface mount | Surface mount |
| Temperature Grade | Commercial and industrial temperature ranges | Commercial and industrial temperature range |
| Driver Architecture | Differential line driver | — |
| Receiver Architecture | Differential line receiver | — |
| Bus Application | Multipoint bus transmission lines | — |
| Logic Supply Level | 5 V CMOS | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| 工作溫度範圍 | [DATA_NEEDED: minimum and maximum operating temperatures] | [DATA_NEEDED: operating temperature range] |
| Maximum Supply Voltage | [DATA_NEEDED: maximum supply voltage] | — |
| Input and Output Current | [DATA_NEEDED: input and output current ratings] | — |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Communication Mode | — | Half-duplex |
| Supported Standards | — | EIA RS-485 and RS-422 |
| Driver Output Count | — | 1 differential driver |
| Receiver Input Count | — | 1 differential receiver |
| Driver and Receiver Control | — | Independently enabled |
| Propagation Delay | — | [DATA_NEEDED: driver and receiver propagation delay] |
| 靜態電流 | — | [DATA_NEEDED: quiescent current] |
| 供應電流 | — | [DATA_NEEDED: driver and receiver supply current] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Driver Output Differential Voltage | — | [DATA_NEEDED: driver output differential voltage] |