ADM489AR vs MAX485EESA+ 比較
詳細並排比較 ADM489AR 由 Analog Devices 與 MAX485EESA+ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | ADM489AR | MAX485EESA+ |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | Obsolete | 啟用中 |
| Product Type | Full-duplex differential line transceiver | RS-485/RS-422 Transceiver |
| Supported Standards | EIA RS-485 and RS-422 | — |
| 資料速率 | 250 kbps | Up to 2.5 Mbps |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Bus Common-Mode Range | -12 V to +12 V | — |
| Minimum Input Impedance | 12 kΩ | — |
| EFT Protection | 2 kV | — |
| EFT Compliance | IEC 1000-4-4 | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Duplex Mode | Full duplex | — |
| Slew Rate | Slew-rate limited | — |
| 封裝 | 14-pin SOIC, 3.90 mm width | — |
| 安裝類型 | Surface mount | Surface Mount |
| 生命週期狀態 | Obsolete | — |
| 工作溫度範圍 | [DATA_NEEDED: Operating temperature range] | -40 °C to +85 °C |
| RoHS 狀態 | [DATA_NEEDED: RoHS compliance] | — |
| REACH Status | [DATA_NEEDED: REACH compliance] | — |
| Lead-Free Status | [DATA_NEEDED: Lead-free status] | — |
| Protocol | — | RS-485, RS-422 |
| Duplex | — | Half-Duplex |
| Number of Drivers/Receivers | — | 1/1 |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| ESD Protection (Bus Pins, HBM) | — | ±15 kV |
| Driver Slew Rate | — | Limited (low-EMI) |
| Quiescent Supply Current | — | 1 mA (typical) |
| Number of Nodes on Bus | — | 32 (1/2 unit load) |
| Receiver Input Impedance | — | 96 kΩ (1/2 unit load) |
| 封裝 / 外殼 | — | 8-pin SOIC (SO-8, 3.9 mm body) |
| Lead-Free / RoHS Status | — | Lead-Free, RoHS compliant |
| MSL 等級 | — | 1 (Unlimited) |