ADM489AR vs SN75176BDR 比較
詳細並排比較 ADM489AR 由 Analog Devices 與 SN75176BDR 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | ADM489AR | SN75176BDR |
|---|---|---|
| 品牌 | Analog Devices | Texas Instruments |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | Obsolete | 啟用中 |
| Product Type | Full-duplex differential line transceiver | Differential bus transceiver |
| Supported Standards | EIA RS-485 and RS-422 | TIA/EIA-422-B and TIA/EIA-485-A |
| 資料速率 | 250 kbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Bus Common-Mode Range | -12 V to +12 V | — |
| Minimum Input Impedance | 12 kΩ | — |
| EFT Protection | 2 kV | — |
| EFT Compliance | IEC 1000-4-4 | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Duplex Mode | Full duplex | — |
| Slew Rate | Slew-rate limited | — |
| 封裝 | 14-pin SOIC, 3.90 mm width | SOIC (D), 8 pins |
| 安裝類型 | Surface mount | Surface mount |
| 生命週期狀態 | Obsolete | — |
| 工作溫度範圍 | [DATA_NEEDED: Operating temperature range] | 0 °C to 70 °C |
| RoHS 狀態 | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: Lead-free status] | — |
| 供應電壓 | — | 5 V |
| ITU Recommendations | — | V.11 and X.27 |
| Communication Mode | — | Bidirectional |
| Bus Architecture | — | Multipoint transmission |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state |
| Receiver Output State | — | 3-state |
| 腳位數 | — | 8 pins |
| Manufacturer | — | Texas Instruments |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Input and Output Electrical Limits | — | [DATA_NEEDED: input and output electrical limits] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| 靜態電流 | — | [DATA_NEEDED: quiescent current] |