ADS8345N vs ADS8344N 比較
詳細並排比較 ADS8345N 由 Texas Instruments 與 ADS8344N 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | ADS8345N | ADS8344N |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | ADC/DAC | ADC/DAC |
| 生命週期狀態 | 啟用中 | 啟用中 |
| ADC Type | Successive-approximation-register SAR ADC | — |
| 解析度 | 16 bit | 16 bit |
| Conversion Rate | 100 kSPS | 100 kSPS |
| Input Configuration | 8 single-ended inputs or 4 differential inputs | — |
| Input Type | Fully differential | Single-ended or differential analog input |
| Supply Voltage Range | 2.7 V to 5 V | — |
| Signal-to-Noise and Distortion | 85 dB SINAD | 84 dB SINAD |
| Serial Interface | 4-wire synchronous serial interface | — |
| Digital Input Overvoltage Tolerance | +5.5 V regardless of VCC | — |
| 工作溫度範圍 | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| 封裝 | 20-pin SSOP | 20-pin SSOP |
| 安裝類型 | Surface mount | Surface-mount SSOP, unitless |
| Input Multiplexer | Onboard 8-channel multiplexer | — |
| Applications | Data acquisition, test and measurement, and industrial process control | — |
| Isolation Support | 4-wire serial interface suitable for low-cost isolated data acquisition | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Architecture | — | Successive-approximation register (SAR), unitless architecture |
| Input Channel Configuration | — | 8 single-ended or 4 differential channels |
| 輸入電壓範圍 | — | 0 V to VREF |
| Reference Voltage Range | — | 500 mV to VCC |
| Typical Power Dissipation | — | 10 mW at 100 kSPS and +5 V supply |
| 供應電壓 | — | +5 V typical |
| 介面類型 | — | Synchronous serial interface, unitless |
| Shutdown Function | — | Yes, unitless |
| Known Pin Compatibility | — | Pin-for-pin with ADS7844, unitless |
| Analog Input Voltage Range | — | [DATA_NEEDED: absolute analog input voltage limits] |
| Digital Input and Output Voltage Levels | — | [DATA_NEEDED: digital logic voltage levels] |
| External Reference Current | — | [DATA_NEEDED: reference input current] |
| Sample-and-Hold Acquisition Time | — | [DATA_NEEDED: acquisition time] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| Noise-Free Bits | — | [DATA_NEEDED: noise-free bits] |