ATMEGA168A-MU vs ATMEGA168-15MT1 比較
詳細並排比較 ATMEGA168A-MU 由 Microchip Technology 與 ATMEGA168-15MT1 由 Microchip Technology. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Microchip Technology
ATMEGA168A-MU - 8-bit AVR MCU 16KB Flash 20MHz VQFN-32 | Microchip
ATMEGA168A-MU ✓ 啟用中Microchip Technology
ATMEGA168-15MT1 - 8-bit AVR MCU 16KB Flash 16MHz QFN-32 | Microchip
ATMEGA168-15MT1 ✓ 啟用中規格比較
| 參數 | ATMEGA168A-MU | ATMEGA168-15MT1 |
|---|---|---|
| 品牌 | Microchip Technology | Microchip Technology |
| 類別 | Microcontrollers | Microcontrollers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Core Architecture | 8-bit AVR RISC | — |
| Flash Memory | 16 KB (8K x 16) ISP | — |
| EEPROM | 512 B | — |
| SRAM | 1 KB | — |
| 最大時脈頻率 | 20 MHz | — |
| Maximum Throughput | 20 MIPS at 20 MHz | — |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| General Purpose I/O Lines | 23 | — |
| Working Registers | 32 x 8-bit general purpose | — |
| Timer/Counters | 3 flexible with compare modes | — |
| ADC | 10-bit, 6-channel (QFN package) | — |
| Serial Interfaces | USART, SPI, 2-wire (I2C/TWI) | — |
| 封裝 | 32-VQFN (5x5 mm) exposed pad | — |
| 安裝類型 | Surface Mount | Surface Mount |
| 生命週期狀態 | Active | — |
| 資料匯流排寬度 | 8 bit | — |
| 工作溫度 | [DATA_NEEDED: operating temperature range] | -40C to +105C |
| Instruction Set | 133 instructions, mostly single-cycle | 133 powerful instructions, most single-cycle |
| Core | — | AVR 8-bit RISC |
| Core Size | — | 8-Bit |
| Max Clock Frequency | — | 16 MHz |
| Program Memory Type | — | FLASH |
| Program Memory Size | — | 16 KB (8K x 16) |
| Throughput | — | Up to 1 MIPS per MHz |
| Package Type | — | 32-QFN (5x5 mm), VFQFN with exposed pad |
| Packaging | — | Tape & Reel (T1 suffix) |
| Boot Loader Section | — | Yes, self-programmable Flash |
| Programming Interface | — | In-System Programmable via SPI |
| Manufacturer Family | — | AVR ATmega (ATmega48/88/168 family) |
| MSL 等級 | — | [DATA_NEEDED: MSL level] |
| RAM Size | — | [DATA_NEEDED: SRAM size] |
| EEPROM Size | — | [DATA_NEEDED: EEPROM size] |
| I/O Count | — | [DATA_NEEDED: number of GPIO] |