BLE112-A-V1C vs BLE112-A-V1 比較

詳細並排比較 BLE112-A-V1C 由 Silicon Labs 與 BLE112-A-V1 由 Silicon Labs. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Silicon Labs
BLE112-A-V1C BLE112-A-V1C - BLE 4.0 Module with U.FL Antenna | Silicon Labs

BLE112-A-V1C - BLE 4.0 Module with U.FL Antenna | Silicon Labs

BLE112-A-V1C ✓ 啟用中

規格比較

參數 BLE112-A-V1C BLE112-A-V1
品牌 Silicon Labs Silicon Labs
類別 RF Modules RF Modules
生命週期狀態 啟用中 停產終止
Bluetooth Version Bluetooth v4.0, single mode —
Frequency Band 2.4 GHz ISM —
Air Data Rate 2 Mbps —
Supply Voltage Range 2 V to 3.6 V —
Power Class Class 2 —
Operating Modes Master and slave —
Simultaneous Connections 4+ in master mode —
Integrated Stack GAP, GATT, L2CAP, SMP, BLE profiles —
Antenna Type U.FL connector (external antenna) —
安裝類型 Surface Mount Surface Mount (castellated pads)
Package Pin Count 32-pin SMD —
Integrated Solution Bluetooth radio, microcontroller and software stack —
Target Application Low power sensors and accessories —
Sensitivity [DATA_NEEDED: receiver sensitivity] —
Transmit Power [DATA_NEEDED: maximum transmit power] —
工作溫度 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: Operating Temperature]
Current Consumption [DATA_NEEDED: TX/RX/sleep current] —
RoHS 狀態 [DATA_NEEDED: RoHS status] Compliant
Standard — Bluetooth v4.0 (Low Energy, single mode)
Frequency — 2.4 GHz ISM band
Device Class — Class 2 (~10 m)
Antenna — Integrated chip antenna
供應電壓 — 2.0 V to 3.6 V
Sleep Current (lowest power mode) — 400 nA
RX Sensitivity — -85 dBm
Serial Interfaces — SPI, UART
Based on IC — TI CC2540 (integrated)
Interrupt Sources — 18 (6 groups)
Wake-up Time — A few hundred microseconds
Battery Support — 3V coin cell / 2x AAA
Firmware / Software — Bluegiga BLE stack v1.0 software
Package Dimensions — [DATA_NEEDED: Package Dimensions]
Certification — [DATA_NEEDED: Regulatory Certification]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價