BLE113-A-V1 vs BLE112-A-V1 比較
詳細並排比較 BLE113-A-V1 由 Silicon Labs 與 BLE112-A-V1 由 Silicon Labs. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | BLE113-A-V1 | BLE112-A-V1 |
|---|---|---|
| 品牌 | Silicon Labs | Silicon Labs |
| 類別 | RF Modules | RF Modules |
| 生命週期狀態 | 啟用中 | 停產終止 |
| Standard | Bluetooth 4.0 (Bluetooth Smart / BLE) | Bluetooth v4.0 (Low Energy, single mode) |
| Frequency Band | 2.4 GHz ISM | — |
| Supply Voltage Range | 2.0 V to 3.6 V | — |
| Receive Sensitivity | -93 dBm | — |
| Air Data Rate | 2 Mbps (1 Mbps BLE) | — |
| Antenna Type | Integrated chip antenna | — |
| Utilized IC / Part | TI CC2541 | — |
| Serial Interfaces | UART, SPI, ISP, PWM | SPI, UART |
| Flash Memory | 128 kB | — |
| On-Module Application Hosting | Yes (BGSCRIPT / BLE API, no external MCU required) | — |
| Active Mode Current | Approx. 6 mA (typical, per Silicon Labs community measurements) | — |
| Modulation | GFSK | — |
| 安裝類型 | Surface Mount (castellated pads) | Surface Mount (castellated pads) |
| 封裝 | 28-pad module, QFP28 footprint class | — |
| RF Family | Bluetooth | — |
| Maximum Transmit Power | [DATA_NEEDED: maximum transmit power] | — |
| Sleep Mode Current | [DATA_NEEDED: sleep mode current] | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | — |
| Frequency | — | 2.4 GHz ISM band |
| Device Class | — | Class 2 (~10 m) |
| Antenna | — | Integrated chip antenna |
| 供應電壓 | — | 2.0 V to 3.6 V |
| Sleep Current (lowest power mode) | — | 400 nA |
| RX Sensitivity | — | -85 dBm |
| Based on IC | — | TI CC2540 (integrated) |
| Interrupt Sources | — | 18 (6 groups) |
| Wake-up Time | — | A few hundred microseconds |
| Battery Support | — | 3V coin cell / 2x AAA |
| Firmware / Software | — | Bluegiga BLE stack v1.0 software |
| 工作溫度 | — | [DATA_NEEDED: Operating Temperature] |
| Package Dimensions | — | [DATA_NEEDED: Package Dimensions] |
| RoHS 狀態 | — | Compliant |
| Certification | — | [DATA_NEEDED: Regulatory Certification] |