BTS441RGATMA1 vs BTS52004EKAXUMA1 比較
詳細並排比較 BTS441RGATMA1 由 Infineon 與 BTS52004EKAXUMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | BTS441RGATMA1 | BTS52004EKAXUMA1 |
|---|---|---|
| 品牌 | Infineon | Infineon |
| 類別 | Power MOSFET Drivers | Power MOSFET Drivers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Manufacturer | Infineon Technologies AG | — |
| Part Number | BTS441RGATMA1 | — |
| Switch Type | 1:1 N-Channel High-Side | — |
| 輸出數量 | 1 | — |
| Continuous Load Current | 17 A | — |
| 拓撲 | Smart High-Side Switch | High-Side, 1:1 N-Channel MOSFET with charge pump |
| Input Type | CMOS-compatible, ground referenced | — |
| Diagnostics | Yes (fault feedback) | — |
| Technology | Smart SIPMOS (N-channel vertical FET + charge pump) | Infineon Smart6 |
| 封裝 | PG-TO263-5-2 (TO-263-5) | PG-DSO-14-48-EP (DSO-14 with Exposed Pad) |
| 安裝類型 | Surface Mount | Surface Mount |
| 腳位數 | 5 | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb range, e.g. 6V-42V] | — |
| On-State Resistance (Rds(on)) | [DATA_NEEDED: Rds(on) at 25 C] | — |
| Over-Current Protection | Yes (integrated) | — |
| Thermal Protection | Yes (overtemperature shutdown) | — |
| Over-Voltage Protection | Yes (inductive load clamping) | — |
| Automotive Qualified | Yes (AEC-Q100 automotive grade) | — |
| RoHS 狀態 | Compliant | Compliant |
| Tape and Reel Quantity | 1000 (per reel) | — |
| Product Type | — | Quad Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| On-Resistance (Ron, typ) | — | 200 mΩ per channel |
| Continuous Load Current per Channel | — | 800 mA |
| Operating Voltage Range (Vbb) | — | 5 V to 38 V |
| Load Dump Tolerance | — | Up to 38 V |
| Standby Current | — | [DATA_NEEDED: typical Ibb(off)] |
| Quiescent Current (active) | — | [DATA_NEEDED: Ibb(on) typ] |
| PWM Frequency (max) | — | 1 kHz |
| Protection Features | — | Short-circuit, overload, overtemperature, overvoltage, open-load detection |
| Diagnostic Output | — | IS pin (proportional load current sense) |
| 工作溫度範圍 | — | -40 °C to +150 °C junction |
| MSL 等級 | — | 3 (per JEDEC J-STD-020) |